Listener - two Services for each Instance

Similar Questions

• IF database-> RAC database: estimate of the size of the SGA for each instance

  Hello!

  Let's say that there is a single instance with SGA 100 G size DB (assume this size is optimal for this database).

  If this database is intended to be converted to a RAC database with 2 instances (suppose DB workload will be spread over multiple instances).

  How to estimate the needs of SGA size for each instance in the RAC database?

  It takes 50G + General cool CARS (say 15%) for each instance?

  (Do not consider situation when one of the instances has failed, and all the charge redirects to an instance having survived)

  I'd be grateful if someone has offered or provided useful references.

  ---

  Kind regards

  Kyrylo

  As a general rule, I would size the SGA on new nodes to 120% of the SGA to single instance. Yes, this means that you will more than double the size of the SGA. You will need additional space to hold the load memory Cache Fusion. And the buffer Cache are possibly a little more space to store additional versions of blocks that seem to accompany the many implementations of CARS. Now, it's just a rule of thumb, so it has a high degree to be very wrong.

  You'll want to consider two big things... (1) the service being used. Will you take advantage of the services to perform the partitioning application? If so, instances can see various workloads that can lead to requests for different resources. (2) you will support a kind of failover (TAF or manual failover) applications? If so, then the LMS must be sufficiently sized to support the additional workload.

  See you soon,.
  Brian

• I have two version for each installed application

  Hello

  I have CC and since I installed actualizaiton, I have two version for each application. For example - CC 2015 photoshop and photoshop 2015.5 CC. Need me some space on the disk, and it's very confusing. I invited of it happened when the last largest actualition revealed. What is the best optinion to unistall old application so I do nothing with the account and automatic updating.

  If win, use the control panel to uninstall the old cc 2015.

  If mac, use the uninstall program in your ps cc 2015 folder.

• I get two boxes for each user action confirmation message.

  I have surgery assign task with two Actions of the user, to appoint and release. I checked the box for require a confirmation message box and now I get two boxes of message for each action. Any ideas?

  I present to you a PDF flattened in the workspace and this might have caused the problem. The problem has been resolved by:

  In the data section & presentation of the special operation assign under player posting, see submit by the reader, to submit in PDF format

• Group of patches to update for each Instance necessary? Urgent!

  Dear experts!
  
  I'm running a server with v.10.2.0.1.0 and 4 instances of database Oracle. Today, I installed the update of the Group of fixes for the version 10.2.0.5.0.
  After the runInstaller routine ended, I connected to one of these cases and ran the catupgr.sql followed by the utlrp.sql script.
  
  My question is if I need to run these scripts for each separately to the upgraded instance of the schemas sys and system to v.10.2.0.5.0?
  
  It is really urgent, because I have to get back to work tomorrow. Systems need to run Monday.
  
  I appreciate your help! Thank you very much in advance for clarifying the steps! I ' ill keep you updated on how things are going!
  
  Best regards
  
  SEB

  skahlert wrote:
  Dear experts!

  I'm running a server with v.10.2.0.1.0 and 4 instances of database Oracle. Today, I installed the update of the Group of fixes for the version 10.2.0.5.0.
  After the runInstaller routine ended, I connected to one of these cases and ran the catupgr.sql followed by the utlrp.sql script.

  My question is if I need to run these scripts for each separately to the upgraded instance of the schemas sys and system to v.10.2.0.5.0?

  Yes, you will need to run scripts on each database that uses this ORACLE_HOME. The steps are described in the README file to 10.2.0.5 patch.

  It is really urgent, because I have to get back to work tomorrow. Systems need to run Monday.

  I appreciate your help! Thank you very much in advance for clarifying the steps! I ' ill keep you updated on how things are going!

  Best regards

  SEB

  HTH
  Srini

• How to invoke Web service for each row of a result?

  Hello
  I have an application that has a report on my old system tables. But for every line of this request, I have to go to Oracle EBS and return a value. The simple approach would be to create a link of database between these 2 databases, but for reasons of security in my company, which is not allowed. So, I built a Web service based on a PL/SQL function stored in the database of the EBS. The Web service has been tested and it works very well. This webservice takes 2 parameters, and returns a number. I would like to call it for each line of the report query result, the parameters passing the columns of the query. Is this possible?
  Thanks in advance!
  
  Published by: Ygorc on December 17, 2009 16:09

  No, I suggested me not to use UTL_DBWS. Flex-ws-api is... Jason Comment should I say... much more flexible, functional and reliable.

  Tyler Muth
  http://tylermuth.WordPress.com
  [Oracle security application: development of secure database and Middleware environments | http://sn.im/aos.book]

• analyze two times for each run?

  Oracle 11.2.0.3 Std Ed One

  Oracle Linux 64-bit 5.6

  New guy was trying to use MS Data Integrator for 1.7 million lines of charge of MSSQL to Oracle.  Process took more than 4 hours.  I started an on the session 10046 trace, let it run for about 5 minutes, then produced the report tkprof.  As I expected, the process was slow-by-slow transformation, issuing an INSERT for each line.  But what I wasn't expecting, it is the count analysis was twice the number of execution.  I am at a loss to explain this.

  call

  County

  central processing unit

  elapsed

  disc

  query

  course

  lines

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  Parse 83226	1.21	1.21	0	0	0	0
  Run 41613	41,41	43.19	5	41732	282786	41613
  Go get 0	0.00	0.00	0	0	0	0

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  Total 124839

  42,62

  44,41

  5

  41732

  282786

  41613

  Chess in the library during parsing cache: 1

  Lack in the library during execution cache: 1

  Optimizer mode: ALL_ROWS

  I convinced the new guy to let me write a simple PL/SQL proc to do an INSERT... SELECT and it ran in under 4 minutes...  but I'm still curious about this count analysis.  In fact, I'm a bit puzzled by the results on my proc as well.  This time, 1 run (as expected) but ZERO parsed?

  call

  County

  central processing unit

  elapsed

  disc

  query

  course

  lines

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  Parse	0	0.00	0.00	0	0	0	0
  Run	1	106.03	193.34	14	484982	2433678	739292
  Fetch	0	0.00	0.00	0	0	0	0

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  total

  1

  106.03

  193.34

  14

  484982

  2433678

  739292

  Chess in the library during parsing cache: 0

  Lack in the library during execution cache: 1

  Optimizer mode: ALL_ROWS

  The analysis of the user id: 656

  (recursive depth: 1).

  Clearly it 'parse' without 'run '.

  I've seen this before.

  Here is an example how it occurs when:

  SQL statement with some analysis but no executions or extraction on the remote database SQL Distributed (Doc ID 580301.1)

  Analysis number is high, but no executions (Doc ID 1335913.1)

• Fullscreen menu: how to RESIZE for each breakpoint in the reagent?

  I have a menu full screen-width in my site.

  For each breakpoint, I want to the size of the menu to the width of the width of the breakpoint page and to create a mobile drop down when the size of the page becomes small to support the menu width to full screen.

  PROBLEM: Even with the options 'Format text on current breakpoint' selected, when I resize the menu, each menu instance is resized. In the breakpoint, the narrowings of menu, while the smallest breakpoint, the menu is correct for the width of the page. When I hide the menu inside a breakpoint and add new menu in the hope of resizing for this breakpoint, double menus are added for each instance of breakpoint. Again, I selected on current breakpoint Format text. I like to keep my menu to full screen width.

  Most important breakpoint = good

  

  Smaller breakpoint = impossible to resize without resizing of all instances of the menu

  

  In the order in the menu was receptive you must use the method of uniform size.

  

• Can I have a form only for all instances of the application of the same type? (OIM 11 G 2)

  Hi all

  I have dozens of instances of the application of the same type (DBUM connector) so I was used to specify the same shape and the same user object while creating instances of the application.

  Is it safe? Or is it better to create a new/different shape for each instance of the application?

  Many thanks and best regards.

  Even if this is the answer, I would say that Yes, always use the same form name in the instance of the application. Recently came across the issue in R2BP10 and R2PS1BP02, where there are several child forms an instance of the application if different names are used for the name of the form in the instance of the application, then the form does not display data in the user interface.

  -Marie

• Using a single server for Multiple Instances of the APEX HTTP

  Our company DBA asked if it would be possible to outsource the server part of HTTP of APEX from DB servers. In other words, it would be highly preferable as DB servers * only * start the Oracle database software.

  We know that we can install the HTTP server on another box, but in thinking how to that, we were wondering if it's really necessary to create a separate HTTP Server installation for each instance of the APEX. What we would really like to do, is have a HTTP server for all our our boxes of Dev and several (but not one) for each of our superior environments; implementation stage, qa, prod, etc..

  Right now, each instance has a file single dads.conf on every box of DB. So, if we we to try to consolidate, we need some way to incorporate several dads files and associate each correct instance.

  Someone has already done this or (preferably) to have some examples?

  Thank you

  -Joe

  The second page on the link provided José begins immediately with the "Configuration of several databases".

  Yes, you can consolidate permanently. It is a common practice that was also available with Apache/mod_plsql, OSH and now with APEX earphone 2.

  Thank you

  Jorge

• Create following files for multiple instances of ColdFusion Cluster instance?

  So when we created our instance of coldfusion 9 on solaris all files and settings of the primary instance are copied except the following file. This means that any changes made here are used for all ColdFusion instances on this node.  Now I want to play with the settings of the memory for an adjustment of the performance of the applications and I want to do on a single instance. I want to know the process of creating individual files for each instance.

  Thank you

  Pradeep

  Hello Pradeep,

  Thank you for your message. Please see http://helpx.adobe.com/legacy/kb/jrun-4-0-configuring-individual.html for configuring individual JVM settings for each JRun server

  Kind regards

  Anit Kumar

• Two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors when installing Code FF Code 80070663

  Original title: two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors during installation

  For several months, one day each on ' Windows Vista Bussiness "and"MS Office Professional 2007' install.

  Relevant updates are:-

  1 security Update for SQL Server 2005 Service Pack 3 (KB2494113)

  2 update for Microsoft Office PowerPoint 2007 (KB2535818)

  The lifted message when the update is "patch installer has stopped working".

  Finally, the "errors:" are: -.

  Code FF  Windows Update has encountered an unknown error

  Code 80070663  Windows Update has encountered an unknown error

  I tried nmerous solutions suggested on the forums but nothing helped.

  Please suggest what you please!

  Hello

  Have what troubleshooting steps you tried?

  Answer to the above question could help us by providing the best troubleshooting steps.
  However, visit the link below to download and install the update of security for Microsoft Office PowerPoint 2007 (KB2535818) update.
  http://www.Microsoft.com/download/en/details.aspx?ID=24723

• For the last week or three Firefox updated two or three times for each update and sometimes for no apparent reason...

  For the last week or three Firefox updates two or three times for each update. Sometimes it refreshes without obvious reason. For example, I'll be in the middle of typing in the message forum block & it refreshes. Or by filling out an online form. Or simply viewing a page.

  You can check for problems caused by an extension that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

  Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

  This is not a formula, but a constant simple schema of a table complex. Wire remains, then do a right click of the terminal of the initializer of the feedback node and select "create constant. That should do it.

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.