Live TV in Media Center stutters source HD OTA.

Similar Questions

• Qosmio G30: No live sound TV - Media Center 2005

  For two months, I have been using a Qosmio G30. The sound is good, all the functions on the PC except Live TV in Media Center Edition 2005. The picture is good but there is no sound... I checked the forums and impossible to find a solution to this problem.

  Hope someone can help me.

  Alick

  It depends on the country you live in...
  Please look at this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18085&TSTART=320

  My solution to the same problem concerning the country settings in media center:
  I need to modify the country of Romania (where I live) to the Germany!
  That's all...

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• When burning a dvd in media center of vista, video playback is jerky as I watch live TV in media center or play a video file with any player

  When burning a dvd in media center of vista, the video playback is choppy. Time to watch live TV in media center or the playback of a video file with any player. How can I fix this. my display driver allows hardware acceleration settings.

  Hello

  Try to upgrade your graphics card to the latest drivers and check.

  You can also check this link:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If not try running SFC scan.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Cannot get live TV on Media Center Center (errors - TV Tuner not installed - ehrecvr.exe)

  Three weeks ago, I got a Dell PC with Windows Vista and a card Hauppauge WinTV HVR-1250 TV that was installed at the factory.

  Since the first day of use, I have two questions that have taken place that I think are related:

  -To try to watch TV live on the Media Center, I get the following error: "Tuner not installed.  Video cannot be displayed because no tuner found»

  -I get the following popup every 45 seconds or so that said error message "Receiver Service Windows Media Center has stopped working".  The details of this error message below:

  Signature of the problem:

  Problem event name: BEX

  Application name: ehRecvr.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47919381

  Fault Module name: StackHash_2901

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 02ac7d20

  Exception code: c0000005

  Exception data: 00000008

  The system version: 6.0.6001.2.1.0.768.3

  I spent about 2 hours with assistance from Hauppauge reinstall all the Hauppauge software, drivers, etc..  I receive the Hauppauge WinTV live TV but still not be able to get live TV on Media Center (the same error as above - "Tuner not installed.').  The aid office in Hauppauge said that they handled several requests like mine, but not can not solve the solution must be found in Vista.

  I receive TV on the Hauppauge WinTV software, but I prefer using Media Center.

  You have a solution to get Media Center to play live TV?

  Windows Media Center does not correctly configure a combo TV tuner signals that supports ATSC and NTSC on a Windows Vista-based computer

  Watch this possible solutions. Mark L. Ferguson MS - MVP

• After turning on my computer I can't start live TV in media center.

  After turning on my computer I can't start live TV in media center.
  It's just there for a few seconds then it gives me a disk error and tells me to restart either the media center or Windows. No help! The only way to get the work TV power is on the backup and Restore Center, and use system restore to return to a previous restore point. The restore point doesn't have to be anything in particular. It may be a system on-demand restore point, before or after turning on the computer. It just makes no sense what so ever.
  My system is a Dell XPS 410 with Vista servie pack 2. I had this problem, since the computer is new, nearly two years ago. Dell support is running out of ideas.

  What are the details of the error which mentions the disc error?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  The manufacturer of the hard drive will have free diagnostic software carefully to check the status of your hard drive.

  The importance only I can get to the system restore solution is the fact that a reboot is involved, if you need to restart just the error disappears too?

  You ran Vista memory diagnostic program to check your RAM?

  Memory diagnostic tool
  http://www.vista4beginners.com/Windows-Memory-Diagnostics-tool

  Can you produce the fault in a clean boot environment?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Are there drivers updated for your Video, cards etc.

  Same question about a possible Bios Update?  Have you tried the Bios to default security is running?

• Live TV - Windows Media Center does not work on Qosmio F30

  I can't enter the Media Center, but I can't run live TV.
  I have a Qosmio F30 - 112, with Windows Vista 32 - bit

  Help! Please

  Hello Marko

  Sorry, but it's a bad way to report a problem. Description of your problem a single sentence isn't going to help a lot to understand what the problem is here. Can you offer more information please?
  TV tuner is installed correctly?
  Some unknown device is listed in Device Manager?
  What antenna do you use? Is - this cable TV or what?
  Have you tried to scan channels on MCE?

  Thanks to succinct report to us and let us know what you have tried to solve this problem.

• Loser sound/image during rewind Live TV in Media Center

  Using Windows 7 and Media Center, upgrade to Windows Vista.

  All other parts of the Media Center seem to work normally.

  I can watch Live TV very well, but if I hit the back of chapter button to go back a few seconds, it works for the first two clicks, but then the screen goes black (the preview window and timeline always functions at the bottom of the screen).

  If I have wind and then forward to the current zone 'live', picture returns but with no sound. Need to get Live TV to get her back.

  The machine is used only for Media Center, but also installed PowerDVD.

  The back of the net...

  Hi Dylan Tusler,.
  Registry warning

  
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
  
  Find and delete these two registry keys and restart to fix the problem:
   
  [EntVersion entVersion\Media Center\Extensibility\Entry Points\ {7e7a8710-9e4a-40a3-824a-7b0baf38abcf}]
   
  [EntVersion entVersion\Media Center\Extensibility\Applications\ {a0cd8951-e5b6-4662-9c9c-d56c5b38ca59}]
  
  
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows 7 Media Center - stuttering/video freezing while playing Internet TV

  I recently installed "clean" Windows 7 Edition Home Premium on XP MCE 2005.  I have serious problems with the video stuttering and freezing frequently during playback of the titles of Internet TV, for example, old episodes of Star Trek.  Results often loud squawk a Duke during freezing.  Sometimes it looks exactly like a CD does when he gets stuck on an imperfection and goes into a fast loop.  The irony is that I can read the exact same titles via Fancast, and have no performance problem either.  Stutter/freeze occurs only during playback via Internet TV in Media Center.

  My system is:
  Intel motherboard - tried two different BIOS D945PVS (according to newest and newest).
  Processor Pentium D 3.0 GHz
  3.0 GB RAM 667 MHz
  nVidia GeForce GT 220, 1 GB of VRAM, connected via HDMI for display in 1080 p (latest verified driver) (second video tried - card was first nVidia 210, 512 GB of VRAM)
  Installed at the Manitoba Intel Gigabit network reports, cable and adapter gigabit connection speed
  Three different tried sound options - Creative Soundblaster X - Fi Elite Pro; MB base IDT HD Codec; nVidia HD Audio, with video/HDMI card).

  I updated all the drivers and installed all Windows updates.  I could really use some help.  I did everything I can think of short of a repair upgrade/reinstall of the operating system.  Thank you, in advance, for your help.

  Well, finally solved the problem.  It turns out that lower level nVidia graphics card I tried (the 210 and GT220) couldn't handle Internet TV via Windows Media Center to the high resolution, I tried to use (1920 x 1080, in my case).  I pulled a map of greater chart end of one of my other computers (a nVidia 9800GT) and Internet TV has played without incident a few hours.  I don "t know where the dividing line is between inadequate and adequate performance GPU, but the GT220 (which I think is about equivalent to a 9400GT) did not work and the 9800GT has done.

  So, if you have a skip/stutter problem, either try a lower resolution or a more powerful card.

• Since this morning I can't watch live TV on media center. It was working fine until last night.

  I restart my computer couple time. But it's still not.

  You can watch recorded tv?

  Here are a few suggestions: -.

  Try a Restore.Select system of any restore point when everything was fine.

  You can uninstall and reinstall the tv tuner card driver. Visit the tv tuner card manufacturer's Web site to download and install the latest compatible driver.

  If the above does not help try this: -.

  Open WMC > tasks > settings > General > Windows Media Center Setup > run the Setup again.

  Once done reconfigures MCE.

• "no tuner available" error when you try to view live TV on media center

  This problem appeared after I loaded WMP 11 to fix the problem with the inability to view .wmv files.  When the TV has stopped working, I brought back to WMP 10, but did not help.  Had a similar problem last year when I could get audio but no video and technician walked me through a registry fix.  I also tried to make the system recovery three times, but who do not have too. The only support of e-mail I got was to do a system recovery and eliminate all my programs.

  Uninstall and reinstall your TV Tuner card driver, but also the decoder. Visit the manufacturers websites to download and install the latest updates. If necessary run the Media Center program installation in Windows Media Center.

  See also: -.

  http://support.Microsoft.com/kb/929453

  S.Sengupta Media Center MVP

• "Copying prohibited" error recorded and live TV on Media Center Win7

  Hello

   

  How long it will take for Microsoft to respond properly to this problem which have thousands and thousands of people.  There are forms and discussions all over the Internet with exactly the same problem.  After I installed Windows 7 and have absolutely no problems until a few weeks ago.  You can't watch the TV show whether direct or reading as a record course.  My problem started just after the updates have been made on 14 January, but I think it's just a coincidence.  It seems also occur when you watch the show on a HD channel.  At the same time if the program is available on a post not HD see you and be able to save it.  I have done everything recommended by the folks at Microsoft for seven different forms and the problem persists.  It's a software program problem or a problem of cable company that Microsoft has been unable or unwilling to respond to.  Just acknowledge the problem and stop putting your customers through the time wasting recommendations that will not fix the problem.  Throughout the Internet, it seems that each host Microsoft has a different answer and a recommendation for the same problem.  When things have been OK with everyone and suddenly the problem began, it is clear that he has nothing to do with the hardware, what a person uses or the supplier who provides the programming.  There is no need to ask as many questions that a person gives up trying to get an answer, when it becomes blatantly obvious, that this is not a personal matter.  Thank you and please send all your Media Center users troubled and frustrated at a place where we can finally get the answer correct and consistent.

   

  Thank you

   

  DEPARTMENT

  Hello MediaCntr_Bugd and Lil Bit,

  Thank you for visiting the Microsoft answers Site.

  The question you have posted is related to Windows Media Center and would be better suited to Windows Media Center community.  For better support, you can view the thread below to the Microsoft Website, www.thegreenbutton.com , the community of Windows Media Center and post if the problem occurs with all channels or only chains.  Alternatively, you can pass on your information system.

  http://thegreenbutton.com/forums/p/86890/437965.aspx#437965

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• where do I place the figure 8, implemented the key listed for xbox live on windows media center?

  I finally have my xbox 360 connected to my computer but now it won't connect again and I get a code for niput but cannot find where.

  On the home screen (a main) scroll to the bottom of the t tasks and understand and then add

• Vista Media Center crashes when you watch live TV

  I have Windows Vista Ulitmate w / sp1 is installed. I use a Hauppauge WinTV PVR 150 mce card (which works fine on my Windows XP startup). Yet whenever I start Live tv in media center it can run for a second or even a minimum (if I'm not looking to change the channel) and then blue screen, which is too fast to see coups. I tried to reinstall the card and with or without the software driver. Here is a report of the Event Viewer error. Thanks for any help you can give.
  Log name: Application
  Source: Windows Error Reporting
  Date: 2009-04-10 14:45:59
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: David-PC
  Description:
  fault bucket 0xCFFFFFFF_ks. CKsDevice::AcquireDevice + 1 has, type 0
  Name of the event: AppTermFailureEvent
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  D:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report069c80e1\WinTV.exe.ATK.KDMP
  D:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report069c80e1\WinTV.exe.mu.dmp
  D:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report069c80e1\WinTV.exe.XML
  D:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report069c80e1\WER80E2.tmp.version.txt

  These files are available here:
  D:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report04065b45
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1001
      4
      0
      0 x 80000000000000
     
      4650
      Application
      David-PC
     
   
   
      0xCFFFFFFF_ks! CKsDevice::AcquireDevice + 1 has
      0
      AppTermFailureEvent
      None
      0
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
  D:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report069c80e1\WinTV.exe.ATK.KDMP
  D:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report069c80e1\WinTV.exe.mu.dmp
  D:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report069c80e1\WinTV.exe.XML
  D:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report069c80e1\WER80E2.tmp.version.txt
      D:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report04065b45
   
  the card and the drivers with and without the software. Here is a copy of a report of error 1001

  Hi Davidn4,

  Thanks for posting on answers.microsoft.com community forum.

  An event that I did research I found this instance occurred on another system, and this is what has been the instance;

  "

  Whenever you select live TV in Windows Media Center, it is as he tries to access the TV tuner card, but it times out. I have the Hauppauge WinTV-PVR150, Media Center Kit for the PCI slot. When she finally leaves tries to display the TV it says "Decoder error" and "video decoder is either defective or is not installed." Restart the computer or Windows Media Center. "

  "

  Because your system is not allowing the error before the reading of the reboot of the system.

  We download the Vista decoder for and then try it to run your process again.

  Here's a general link for set-top boxes, however, you can go to the website of cards and looking for the decoder from here or try a search online because it is decoder Vista.  Don't forget no decoders are not usually created by Microsoft, and we can not guarantee the results of third party downloads or the stability of your system after such a transfer, so be careful when downloading from other sites.

  Please let us know if there are any necessary information or if that solves the problem.

  Thanks again for posting on our forum.

  Kind regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Error message "Windows Media Center has stopped working" what Xbox Live is connected.

  Original title: TRY XBOX LIVE WITH WINDOWS MEDIA CENTER UI

  I have some setting wrong my XBOX Live interface with my computer. I get the message "windows media center has stopped working", immediately after the seizure of the 8-digit code provided by X - box in Windows Media Center. I dropped my firewall, I also allow all programs and open all ports to come through my firewall. What else can I try to remedy? Thanks, Cliff.

  Hey, Cliff,

  1. what operating system is installed on your computer?

  2. Windows Media Center works great if you do not connect Xbox Live?

  Follow the step in the article below and check if it helps.

  While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Media Center has stopped working".

  http://support.Microsoft.com/kb/932343/en-US (Applicable to Windows Vista)

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]