Qosmio G30: No live sound TV - Media Center 2005

Similar Questions

• Qosmio F10-125: Image Enhancement Utility & Media Center 2005

  I have a F10-125 and when Toshiba image Enhancement Utility is on and Fn + F5 is in mode LCD only you use Media Center 2005 there is a light brand in all the botton on the right hand of the LCD screens and it is not a dead pixel. I tried everything and even seen the same model with the same defect in a store.

  But deactivating Toshiba image Enhancement Utility brand will in Media Center, but if the excellent image quality. is their an insufficient between Media Center 2005 and Toshiba photo Enhanement utility or is their away to get rid of the keen brand.
  Thank you very much

  Hi David

  Can you please be more specific as to our image Enhancement Utility Toshiba is on? In my opinion, you can run this utility, make any desired setting and confirm with OK. Close image Enhancement Utility and then start Media Center.

  Have you checked is this brand present on some other cases such as DVD playback or something like that?

• Sir I have microsoft media Center 2005.sound missing

  Mr President, I have a HCL system which was pre installed Windows XP MCE2005. Then I changed the motherboard to add the graphics card. After changing the motherboard, I have installed windows MCE2005 recovery CD. I find that the sound is not coming. Please tell me how to get the sound

  Hello

  This limited issue is specific with Windows media center or with everyone?
  Follow the steps in the planned article and see if it helps.
  Reference:
   
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/en-GB
  To install the latest drivers, I suggest you to contact the manufacturer for assistance.
   
  Reference:
  Support for Windows XP Media Center 2005 Edition
  http://support.Microsoft.com/ph/7024
  I hope this helps.

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• When burning a dvd in media center of vista, video playback is jerky as I watch live TV in media center or play a video file with any player

  When burning a dvd in media center of vista, the video playback is choppy. Time to watch live TV in media center or the playback of a video file with any player. How can I fix this. my display driver allows hardware acceleration settings.

  Hello

  Try to upgrade your graphics card to the latest drivers and check.

  You can also check this link:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If not try running SFC scan.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Cannot get live TV on Media Center Center (errors - TV Tuner not installed - ehrecvr.exe)

  Three weeks ago, I got a Dell PC with Windows Vista and a card Hauppauge WinTV HVR-1250 TV that was installed at the factory.

  Since the first day of use, I have two questions that have taken place that I think are related:

  -To try to watch TV live on the Media Center, I get the following error: "Tuner not installed.  Video cannot be displayed because no tuner found»

  -I get the following popup every 45 seconds or so that said error message "Receiver Service Windows Media Center has stopped working".  The details of this error message below:

  Signature of the problem:

  Problem event name: BEX

  Application name: ehRecvr.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47919381

  Fault Module name: StackHash_2901

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 02ac7d20

  Exception code: c0000005

  Exception data: 00000008

  The system version: 6.0.6001.2.1.0.768.3

  I spent about 2 hours with assistance from Hauppauge reinstall all the Hauppauge software, drivers, etc..  I receive the Hauppauge WinTV live TV but still not be able to get live TV on Media Center (the same error as above - "Tuner not installed.').  The aid office in Hauppauge said that they handled several requests like mine, but not can not solve the solution must be found in Vista.

  I receive TV on the Hauppauge WinTV software, but I prefer using Media Center.

  You have a solution to get Media Center to play live TV?

  Windows Media Center does not correctly configure a combo TV tuner signals that supports ATSC and NTSC on a Windows Vista-based computer

  Watch this possible solutions. Mark L. Ferguson MS - MVP

• After turning on my computer I can't start live TV in media center.

  After turning on my computer I can't start live TV in media center.
  It's just there for a few seconds then it gives me a disk error and tells me to restart either the media center or Windows. No help! The only way to get the work TV power is on the backup and Restore Center, and use system restore to return to a previous restore point. The restore point doesn't have to be anything in particular. It may be a system on-demand restore point, before or after turning on the computer. It just makes no sense what so ever.
  My system is a Dell XPS 410 with Vista servie pack 2. I had this problem, since the computer is new, nearly two years ago. Dell support is running out of ideas.

  What are the details of the error which mentions the disc error?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  The manufacturer of the hard drive will have free diagnostic software carefully to check the status of your hard drive.

  The importance only I can get to the system restore solution is the fact that a reboot is involved, if you need to restart just the error disappears too?

  You ran Vista memory diagnostic program to check your RAM?

  Memory diagnostic tool
  http://www.vista4beginners.com/Windows-Memory-Diagnostics-tool

  Can you produce the fault in a clean boot environment?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Are there drivers updated for your Video, cards etc.

  Same question about a possible Bios Update?  Have you tried the Bios to default security is running?

• When I reinstalled windows xp media Center 2005, I get a prompt to insert the disc of windows xp professional service pack 2 CD, I don't have it, what should I do then?

  When I reinstalled windows xp media Center 2005, I invited to insert the disc of windows xp professional service pack 2 CD, I'm not available, what do I do next? If I canceled it, I know that windows installed yet to complete the work. But I'll soon get error and windows do not work properly.

  I am frustrated with Microsoft Corp., why didn't they make things easier for users to enjoy. I noticed all the announced sounds so pleasant during installation.  Everything suddenly it asks for windows professional service pack 2 CD.  where I go to get this information from?

  Can someone help me right now, I am desperately wanted to complete this work. I left my computer hang for hours and hours. waiting for windows xp professional CD disk to copy and install.

  Thanks for your response.

  Luke

  See this link from a previous thread for advice and information.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/is-there-a-way-i-can-still-get-SP2-and-SP3-for/9b917f32-4353-4B7E-BC54-348470f7ff31

• Windows XP Media Center 2005 cannot connect to the Internet

  Dear all,

  I'm having a problem with Windows XP Media Center 2005. The problem is that when I connect the cable from the modem to the laptop, I only send packets without receiving. The IP address I get is also 169.254.207.207, which is not a valid IP address to connect to the internet, and so I guess that something is blocking the laptop to get the IP address. Another thing I noticed is that when I turned off the modem and restart it, I have connectivity maybe 5 seconds and then return to no connectivity.

  You guys can tell me what is the problem, and if I have to download something but in addition to the internet so that I can get my laptop to work. That said, I can connect to wireless with no problems.

  Thanks for your help and your time

  Martyna

  Hello

  Sorry for the question but what modem did you mean?
  A simple analog modem or DSL (broadband) modem that supports support a LAN connection.
  If you mean the second then I would check the TCP/IP settings in the properties of LAN card. The settings should be set to automatic

  You should also check that you firewall settings.

• Download for xp media center 2005

  I need to reinstall XP center media, 2005. I lost my disk but have the COA and the key code. Is there a download for XP media center 2005 everywhere?

  Hello

  You will not find legal downloads for it.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• Not able to install Windows XP media center 2005, het a message to install the Update Rollup 2.

  Original title: how to install the Update Rollup 2

  I recently bought a kindle fire hd but when I connect it to my computer with the usb connection, it shows not only a connected device on my computer.amazon tried to install windows xp media center edition 2005 (kb900325) .but it would not install it came a message saying I need to install cumulative update 2 first.î tried, but does not Please help

  Hi James,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it looks that you are not able to install Windows XP Media Center.

  I have a couple of steps that should help you to solve this problem.

  Follow these 4 steps to install the KB925766 correctly:

  a. if the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

  To determine whether the 886904 update is installed, follow these steps:

  i. click on start, run, type appwiz.cpl, and then click OK.

  II. Click to select the show updates check box.
  III. in the list currently installed programs, locate the following item:

  Fix for Microsoft .NET Framework 1.1 (KB886904)

  If you see this option, you must remove the hotfix. To remove the patch, click on the Microsoft .NET Framework 1.1 (KB886904) Hotfix and then click on remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

  b. to install this update, you must have Microsoft .NET Framework 1.1 and .NET Framework 1.1 SP1 installed. Windows Update detects whether these packages are installed. Windows Update automatically installs these packages for you.

  (i) follow the link below to download the .net framework 1.1 manually:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

  (ii) follow the link below to download the .net framework 1.1 SP1 manually:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en

  c. cumulative update 2 for the Windows XP Edition Media Center 2005 (KB900325)
  Follow the link below to download and install the KB900325:
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e5daf37e-E243-4410-BC51-81cf2b56fe6e

  d.October 2006 Update Rollup for Windows XP Media Center Edition 2005 (KB925766)
  Follow the link below to download and install the KB925766:
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=8a2e5868-c2b9-4131-b08e-afc7cb0a6576

  Now try to install this update and let us know if it solved the problem.

  For additional help, refer to the article below:
  http://support.Microsoft.com/kb/925766

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Is there a way to get a copy of Windows Media Center 2005 french as I have a valid license key for a version of MC in XP

  Original title: media library

  I have a HP M7330 Media Center with a dead MB machine. Changed the MB & learned, too late, "Mo tattoo" as fact by HP & cannot use the recovery partition to reinstall. I'm looking for a way to get a copy of Windows Media Center 2005 french as I have a valid license key for a version of XP MC, this license does not work with my XP Pro drive & my better half - would like to get this machine in order for the moment.

  Thanks for any help before the machine answers my sledgehammer.

  Luke

  Hello

  Windows XP Media Center is available for OEM only and if you don't have a motherboard the OEM valid, it will not activate.

  The only option would be to get a newer version of Windows if your system supports or get an OEM motherboard (HP) that you can use the recovery on.

  You can see this article if you want to upgrade to Windows 7.

  Upgrade Windows XP to Windows 7

   

  The upgrade to Windows 7: frequently asked questions

• Media Center 2005 Lost or corrupted, files can not save

  Shortly after the beginning of 2012 I noticed problems with my Media Center 2005 w / sp3.  When I would try to open the video section, I got a note that some files are missing or may be damaged.  When I actually tried to schedule a recording, I was given the following message is displayed.  "A critical Media Center process has unexpectedly failed.  "If the problem persists, please reboot your machine (I have, several times) and try again, or contact technical support Code: 3.

  I haven't added or updated all the software, with the exception of some automatic updates from Microsoft.  Any ideas?

  Tom

  Hello

  I recommend you follow the steps in this article to resolve the problem.

  http://support.Microsoft.com/kb/910905

• my xp media center 2005 gives an error "the video decoder is currentley in progress for use by another application"

  my xp media center 2005.

  whenever I try to use my media center ' video decoder is currentley in use by another application close all applications and restart the Media Center»

  I have no other programs running and have no idea what as happened to create this problem

  Suggestions: -.

  1] uninstall and reinstall the video decoder.

  If the above does not help, then

  2] uninstall and reinstall the tv tuner card driver. Visit the manufacturer's Web site to download and install the latest compatible driver.

• Windows xp media center 2005 version... Media Library LTL.

  For some reason any early options Center media only now include photos and create cd/dvd... No other options display on the splash screen I can't see my music, videos etc... where is he past?, and how do I get it all back to the list of menu start. It is preinstalled on my laptop Fujitsu siemens and was allowed until 3 months ago...

  Hello

  Since Windows XP Media Center Edition was included with your hardware device or system, the hardware manufacturer provides technical support and assistance for this software. The manufacturer is no longer qualified to support the software that it is pre-installed on its products.

  For more information, please visit:

  Support for Windows XP Media Center 2005 Edition

  Support - Fujitsu Global