Cannot get live TV on Media Center Center (errors - TV Tuner not installed - ehrecvr.exe)

Similar Questions

• Did not get the product for Media Center-no code can not process the order

  I asked the promotional offer for Windows 8 Media center, but never received the code.  He said that it takes 72 hours to receive, but it has been good (probably about 2 weeks).  I checked all my email, including spam, and there is no email with the code.  I tried 3 e-mail addresses and now all I get is "cannot process order.

  Hi Sukeyrh,

  Sorry to hear that you have a problem with that.

  You may reach the Service the customer to know that you run in. You can find the telephone numbers of the Service the customer in your area below:

  United States: 1-800-Microsoft (642-7676)

  Canada: + 1 877 568 2495

  Comprehensive list of phone numbers can be found here.

  Keith

• Windows Media Center error - 'Video Gallery not available"/"Content not available"errors

  Hi, I am running Windows 7 Home Premium edition and although I see the Internet TV, research etc logo - I can't watch anything.

  I turned off my windows firewall and checked my anti-virus to make sure it is not blocking anything.

  I'm not under any spyware or other ad blocking software.

  I open a port in the firewall of my router for this program?

  I have already tried the normal patches as the resettlement of library, auto download etc.

  Thanks in advance.

  Liameh:

  Unfortunately, Internet TV is not supported in the Canada, and I don't know if it will be in the future or not.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need help with my Windows Media Center. I was not able to get any video on my Windows Media Center.

  original title: I need help with my Windows Media Center.

  I was not able to get any video on my Windows Media Center. How do I do that? I can put it on Facebook, but cannot get them on the Media Center. I'm ready to pull my hair out LOL

  Hello

  1. what exactly happens when you try to play any video on media center to Windows? Error message? If so, then post back the exact error message.
  2. were you able to play videos on Windows media center with no problems before?
  3. don't you make changes on the computer before this problem?
  4. are you able to play the videos on Windows media player?
  5 are supported by Windows media centerfiles?

  Answer to the above mentioned questions could help us help you better.

  The following article might be useful.
  Solve problems with DVDs and movies in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-DVDs-and-movies-in-Windows-Media-Center

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• After turning on my computer I can't start live TV in media center.

  After turning on my computer I can't start live TV in media center.
  It's just there for a few seconds then it gives me a disk error and tells me to restart either the media center or Windows. No help! The only way to get the work TV power is on the backup and Restore Center, and use system restore to return to a previous restore point. The restore point doesn't have to be anything in particular. It may be a system on-demand restore point, before or after turning on the computer. It just makes no sense what so ever.
  My system is a Dell XPS 410 with Vista servie pack 2. I had this problem, since the computer is new, nearly two years ago. Dell support is running out of ideas.

  What are the details of the error which mentions the disc error?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  The manufacturer of the hard drive will have free diagnostic software carefully to check the status of your hard drive.

  The importance only I can get to the system restore solution is the fact that a reboot is involved, if you need to restart just the error disappears too?

  You ran Vista memory diagnostic program to check your RAM?

  Memory diagnostic tool
  http://www.vista4beginners.com/Windows-Memory-Diagnostics-tool

  Can you produce the fault in a clean boot environment?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Are there drivers updated for your Video, cards etc.

  Same question about a possible Bios Update?  Have you tried the Bios to default security is running?

• Qosmio G30: No live sound TV - Media Center 2005

  For two months, I have been using a Qosmio G30. The sound is good, all the functions on the PC except Live TV in Media Center Edition 2005. The picture is good but there is no sound... I checked the forums and impossible to find a solution to this problem.

  Hope someone can help me.

  Alick

  It depends on the country you live in...
  Please look at this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18085&TSTART=320

  My solution to the same problem concerning the country settings in media center:
  I need to modify the country of Romania (where I live) to the Germany!
  That's all...

• When burning a dvd in media center of vista, video playback is jerky as I watch live TV in media center or play a video file with any player

  When burning a dvd in media center of vista, the video playback is choppy. Time to watch live TV in media center or the playback of a video file with any player. How can I fix this. my display driver allows hardware acceleration settings.

  Hello

  Try to upgrade your graphics card to the latest drivers and check.

  You can also check this link:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If not try running SFC scan.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Error 'Tuner not installed' in Media Center

  I have Windows XP Media Center version and had no problem to watch and record TV live until a few weeks ago. All of a sudden, I get an error "tuner not installed." I did a system restore to a date where the tuner works and it has failed. Any ideas for me on how to get my tuner to work again? I saw a bunch of other questions like this on the web... but the technical details of it go above my head. Not sure if someone got a good solution. Any help would be appreciated. Thank you!

  Update your tv tuner card driver. Make sure that the video decoder works.

  http://Microsoft-Windows-XP-video-decoder-check.software.informer.com/

  Visit the manufacturer's Web site to download and install the latest driver TV Tuner compatible TV Tuner. Open Windows Media Center and start installation again to reconfigure it.

  S.Sengupta Media Center MVP

• XP Windows Media Center error "Application has generated an exception could not be treated.

  XP Windows Media Center error

  My windows Media Center continues to send this message whenever I try to open it.

  Application has generated an exception could not be treated. Process id = ox1cc4 (7364) thread id = 0x1cb4 (7348)

  I gives me the ability to run the JIT debugger and when I try I get this message.

  Registered JIT debugger is not available. An attempt to start the JIT debugger with the following command resulted in an error code of 0 x 2 (2). Check the settings of the computer.

  Cordbg.exe 1A 0x1cc4

  Hello

  ·         You did changes to the computer before the show?

  ·         You have the latest updates of Windows installed including the Service Pack 3 for Windows XP?

  Try the following.

  a. close Windows Media Center.

  b. Click Start. Click Run, type cmd in the Open box. Press enter.

  c. type each command mentioned below one after the other and press enter.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  d. restart Windows Media Center.

• How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.

  Windows XP and using the Xbox 360!

  How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.  I don't have media player. I received a key to the xbox code, BUT Media Player do not ask for it? My wireless works fine.  XBox works very well. Yes, I know that I should upgrade to Windows 7 but until my budget allows, is what I have.  Thank you.

  Try this link for XBox: http://social.msdn.microsoft.com/Search/en-US?query=XBOX%20on%20Windows%20XP&ac=3

• Windows media center error starts automatically at windows startup

  Original title: windows media center error

  my computer is a windows update on its own and I rebooted several times and each time windows media center begins with the little blue label in the middle of the screen. an error appears and says to close the program, when I click on that it does nothing the blue box is still n the middle of my screen and the rest above all. How can I stop start started wen I can't go to the application at all?

  Hello

  1. are you able to boot to the desktop?

  2. what happens once the computer is restarted, it automatically restarts or are you to force the computer to shut down?

  If so, then start the computer in safe mode and disable the option run program at startup.

  Method 1: Disable the option run program at startup

  a. on the screen start, navigate to tasks, click settings, click general, click Startup and window behavior and then uncheck the Windows Media Center start at Windows startup.

  b. click Save to save your changes.

  I also propose to consult the sites listed below:

  http://windows.microsoft.com/en-US/windows-vista/Stop-a-program-from-running-automatically-when-Windows-starts.

• HP slimline s3120n-Windows Media Center - Tuner not installed error

  Media Center does not. Tuner not installed message! Help!

  I have a hp slimline s3120n. I got probably around January. Ive been watching TV on it with a card of A 48, 3 ViXS Pure TV - U. recently, then do not install anything I turned it on and got an error from the center of media saying "Tuner not installed" I tried all the things on the hp support Web site
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01187871&lang=en

  I have also a windows server backup from my computer. I restored my computer to a point where the computer work and it didn't work. I looked everywhere on the internet and you can find a lot of people with the same problems, but not answers

  my card is displayed as working on Device Manager too so it must be a software problem.
  im running windows vista 32 bit
  I have tried reinstalling drivers did not work, tried to remove the map and back does not work

  I have HP slimline is now Windows 7 and Vista. When I upgraded to Windows 7, I did not go off Homegroup. My Vixs tuner worked fine for 2 years. Recently, may 2011, I decided to start the homegroup; What a mistake!

  My Media Center said that I had no TV tuner.
  After much research, I found this solution.
  In windows 7 go to "Administrative Tools" and launch 'Services '.
  Scroll down to "Windows Media Center Receiver Service" and under "connect as" column, make sure that setting is 'Local System' and not 'Network Service '. The "Startup Type" value in the manual. not automatic.
  This fixed my issue.

• customization error "Sysprep is not installed on the server of virtual center for the model you have selected.

  Hi all

  Need your help with customization of the script here is the steps I've done so far

  1.I have created a virtual machine with Windows XP Professional as the operating system installed VMware Tools / VMware view agent then I added the virtual machine to the domain and created a template called (winXPtemp)

  2. According to article http://www.VMware.com/support/VC/doc/c12prepcustomize.html#1030366 I downloaded the Q257813_w2k_spl_x86_en.exe and the same extract. I force my VC server find the path as mentioned in article

  C:\ [VirtualCenter_installation_directory]\resources\windows\sysprep\1.1 so copied the files extracted to the location C:\Program Files\VMware\Infrastructure\VirtualCenter Server\resources\windows

  3 then I copied and extracted the file \support\tools\deploy.cab on the windows 2003 CD and copied the sysprep files extracted to the following location on the VC Server

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  4. After you have done that, I've created a script under customization script called "testsript".

  5 Note until now I have not created a pool of resources as requires it the deployment of only 4 VM on an ESX Server with script customization. The data store for the virtual machine is a 100 GB LUN from a 2050 of FAS of NetApp iSCSI

  6. now when I create an automatic pool when I select the script that I created in step 4, and then click then it gives me an error "Sysprep is not installed on the server of virtual center for the model you have selected. Sysprep on the server installation.

  Troubleshooting done by me:

  I have readded the VC Server Manager to view but it force worked

  Thanks in advance for your help

  Kind regards

  v

  If I remember correctly the location for XP should go to: C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  For XP SP2 Sysprep files can be downloaded from the Microsoft site and are called

  Windows XP SP2 deployment tools

  The article you linked was VirtualCenter 1.x. Since you have given a version number of VirtualCenter I assumed it was 2.x or later.

  ----

• Cannot access controls in Windows Media Center after watching live TV

  original title: I can't find the controls for windows media center so when I watch live TV and have done I have to turn my pc off power then back to use my pc

  If I'm watching tv using the media library, that I need to stop and restart to be able to use my pc when I want to stop watching the tv

  I don't know why you would not be able to see the controls, but to stop the programme press ALT + F4 and it needs to close the active window.

  I hope this helps.