LMS does not mark as complete courses?

Similar Questions

• Smartphones blackBerry eception exception: Application net_rim_medialibraryplayer (291) does not. process is completed

  Hello world

  I'm listening to music with my blackberry 9700, but as soon as I select a title and click on play all crashes and I have to restart the device.

  After indicating my pin code, I get the error message "eception exception: Application net_rim_medialibraryplayer (291) does not; process is completed.

  What this means and what I can do about it?

  Your help is really appreciated.

  Thank you very much in advance.

  Miriam

  Hi and welcome to the forums!

  "After indicating my pin code, I get the error message" eception exception: Application net_rim_medialibraryplayer (291) does not; process is completed.

  Do you mean your device is password protected, and you enter the "pin" or you

  must enter a PIN in order to listen to a song?

  I guess that your support is on a memory card, if you take it off you have the same error?

  No problem with the ringtones and alerts?

  The first step would be a traction battery as shown below.

  No data will be lost when you do the following: remove the battery while the device is activated.
  Replace after one minute, let the device reboot 10 minutes, see if the problem is corrected. I like to leave the device completely reindex the files.

  If this doesn't solve your problem, try raising the phone in safe mode;

   KB17877 How to start a BlackBerry smartphone in safe mode.

  Check the settings of your media card, if they are correct, reverse them and reset. Then battery pull.

  Use the following settings in the segment of memory of the menu options.
  (options > memory)
  Card support ON
  NONE encryption mode
  Media transfer protocol WE
  WE support mass storage
  Auto enable mass storage support when it is connected TO

  (still in status > scroll to security options > encryption0)

  Make sure of course have no content protection enabled.

  Battery pull what happens?

  If all else fails, I would use the following to verify your card (save the media BEFORE!)
   ' KB14745 ' " Memory card error, please use disk utility control on computer" is displayed on the home screen of the smartphone BlackBerry.

  I've left the best for last, which would be a wipe and charging the device, OS, after a full backup successful device using Desktop Manager.

  Try and see if you can get the following error information:

  KB17215 How to extract information from a BlackBerry smartphone with the Chargers or incorrect command line tool

  And the last would be the device OS reload.

  KB13323 Untrapped exception errors appear on the BlackBerry smartphone

  Let us know how it goes!

  Thank you

  Bifocals

• Does not mark the emails as unread - iOS 9.3 and Exchange account

  Hello

  It drives me crazy! I'm an iPhone user for many years since the first iPhone.

  I use the mail with exchange account application.

  Given that I have updated to iOS 9.3 I does not mark the emails as unread after they are read.

  The status "unread" is constantly reset to 'read '.

  I lose emails because of it!

  Who can help on this?

  Thank you

  Oded

  This isn't the behavior that I'm observing.

  Have you tried a simple Reset by pressing the Home and Power buttons until the Apple logo appears.

• does not; process is completed?

  I'm testing my application in the emulator 9530 with 4.7 version. Sometimes the error will occur when I leave my app without doing anything. Error was:

  Eception exception: Application App$ 202009 (151) does not. process is completed

  My app has a thread that runs every 5 seconds to update the user interface.

  No idea what is the problem?

  The problem is that the queue is full.

  In most cases, it occurs when an application calls of invokeLater() several times one after another.

  And there are some applications that are not yet resolved, but new are coming and coming.

• Smartphones blackBerry eception exception: application net_rim_bb_addressbook_app (250) does not. process is completed

  Hello

  I found this error in my BB8520 "eception exception: application net_rim_bb_addressbook_app (250) does not; process is completed"and I can not save or edit contacts in the phonebook. nothing etinterpretation to reinstall the system to an earlier date. Can you help me please?

  It will work! After doing research, you need to delete programs such as yahoo messenger and Windows live ON your phone. They interfere with the address book (uncaught Exceptions is a program that appears when problems arrive). Another thing you don't use or that is not supported by your version must example from applications of police etc. After you uninstall these restart your phone and you have, no more exceptions. Especially delete yahoo and windows live messenger, otherwise it will not work. I am convinced that it works bc I just did this, then your host in advance. Have a good

• HP Pav M4 - 1012TX 35cm: my 3rd OEM CD does not able to complete the recovery

  Dear team,

  I bought HP Pav M4 - 1012TX 35cm in 2013 and recently upgraded to windows 10. However it did not work very well and so I downgraded to version 8.1 himself.

  But there was some error durig the process and in the end, I decided to use my recovery cd.

  my bad luck my 3rd recovery cd does not work and could you please help me on the way to recovery cd command.

  All possible suggestions are welcome please. TIA

  Hi @Bharath1,

  Thanks for posting your question in the HP community, a great place to get support and resolutions of the experts in the community. I read your post on the order of recovery media for your HP computer as windows 10 will not work correctly. It will be a pleasure to help you.

  I will direct you to the correct location to order recovery media. Please visit this link to contact support HP phone to order the recovery media for your computer. Link: http://hp.com/contacthp

  You must select the country and language. Then enter the number of the product of the unit and follow the instructions on the screen to contact the hotline.

  I hope this helps. I would like to know how this happens. Please mark this message as "acceptable Solution" if it helps. Also, Bravo would be appreciated for my efforts by clicking on the "Thumbs Up" button. Take care and have a wonderful week ahead.

• HP Pavilion 15 p150nh: laptop does not turn off completely

  Hello!

  I have a laptop HP Pavilion p150nh 15. It does not turn off. If I want to close it will turn off completely. I have black screen but the vens are still on and the buttons start led is also single beds. I've tried everything. Updates, hard reset I was looking for BIOS but nothing.
  Help me please!

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Windows Explorer (Vista) does not display the complete list of Favorites

  In the current w / last week, my IE (9) does not open a Favorites folder.

  
  (It is large enough - maybe entered 800 (I can't check. beak of this problem).)
  Then I noticed that Windows Explorer will never complete if I asked him to show the contents of this folder.
  (It shows a lot, but then never finished.)
  Worse, even if I peut stop it, if I try to go to another folder, it tries to display the original folder again.
  Worse, if I kill this window, the explorer.exe process continues to face of ~ 100% of my (two processor!) CENTRAL PROCESSING UNIT.
  
  Kill this process is not (even later) to get me a new Windows Explorer, & so I have to shut down or restart.
  Malwarebytes Pro says that my system is clean.
  .. .as is dskchk (sp?)
  I tried to isolate the problem by doing a binary search:
  • Find ~1/2 files in the offending file.
  • Move them to a new folder.
  • See if there is still an offending folder.

  .. but it took forever, because I keep falling on this problem that I try to do this last step.
  I'm running out of ideas!

  Hello

  Follow the following troubleshooting methods:

  Method: 1

  Start the computer in safe mode with network and then try to open the Favorites folder.

  Startup options (including safe mode)

  Method: 2

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  After you clean boot troubleshooting, follow step: 7 article to reset the computer in normal mode.

  Method: 3

  also, I would sugest to open internet explore mode no. Add-on and check how it works.

  Open internet explore mode no. Add-on

  a. click the Start button

  b. click on all programs

  c. click on accessories

  d. click on system tools

  e. then click Internet Explorer (No Add-ons)

  If disabling all add-ons solves the problem, you can disable all add-ons and then put modules only as needed.

• Eception exception: Application test1 (176) does not. process is completed

  My application appear error message "Eception exception: Application test1 (176) does not; the process is completed. ", by searching on this forum, it seems that the queue is full." I have a timer thread that publishes events to the event from the queue by like that

  UiApplication.getUiApplication () .invokeLater (new Runnable()

  {

  public void run() {}
  any code to update the user interface

  }

  });

  My Question: Is there a way to check how full (number of items) is the queue of the event? What is the maximum elements it may contain?

  A related question:

  Can I replace all the invokeLater() call with UI code in a worker thread associated with acquiring the lock of the event running?

  synchronized (UiApplication.getUiApplication () .getAppEventLock ())
  {
  any code to update the user interface

  }

  This code runs in a worker thread but held event lock, no problem with this code?

  You don't mention your test environment.

  If it's in a real device, you can use the Javaloader utility to retrieve the log of events to a text file, using the USB cable. This utility is provided with the JDE, but you will need to have a recent version of Desktop Manager isntalled to get the current USB drivers for your device.

  Another method (which works on the SIM and the device), is to view the log of the events on the device running or the Simulator.

  For non touch devices, go to the home screen and type:

  L G L G

  To contact devices, go to the home screen and hold the «?» 123"key for a few seconds, then type ', 5, 5".

• QT_TR_NOOP() macro does not mark the string for the extraction of the .ts file

  Hello

  Because I want to put all the translatable texts in one place, I defined a separate category for that. The .h file similar to below:

  #ifndef TEXTCONSTANTS_H_
  #define TEXTCONSTANTS_H_
  
  #include "qobject.h"
  
  class TextConstants : public QObject {
      Q_OBJECT
  
  public:
      static const char *SWITCH_APP;
  };
  
  #endif /* TEXTCONSTANTS_H_ */
  

  And the .cpp file similar to below:

  #include "TextConstants.h"
  
  const char *TextConstants::SWITCH_APP = QT_TR_NOOP("Switch App");
  

  Note that in the file above, I use QT_TR_NOOP() macro to mark the string given for extraction of the .ts file. This is mentioned in the documentation at https://developer.blackberry.com/native/documentation/cascades/device_platform/internationalization/....

  I then called tr (TextConstants:WITCH_APP) in a different subclass of QObject. The problem is that the text "App switch" is not extracted from the .ts file, why? If I call tr() and skip the text "App Switch" like tr ("Switch App"), this text is extracted from the .ts file. Am I missing a few things to make it work? Thank you.

  PS. I use® for QNX Momentics® IDE for BlackBerry® 10 native SDK, Version: 10.1.0, Build id: v201303191709

  Hello.

  I think you have misunderstood my suggestion.  I was only suggesting that you call the function tr() in your statement of constant ithat you posted nstead of QT_TR_NOOP(), not in other parts of your code, to see if the compiler accepts it and the chain gets extracted correctly.

  If this does not work, I'll try to track down the code of the work for the purposes of comparison.

  Sorry if I wasn't clear before.

• Smartphones blackBerry eception exception: application net_rim_bb_phone_app (49) does not. process is completed

  When I try to add a new contact in my address book nothing happens and I get a message saying eception exception: application net_rim_bb_phone_app (49) does not. process completed some can please help me

  
  

• How can I make Windows 7 Firewall does not mark VMNet1 and VMNet8 as public

  I want to use the DLNA (Digital Living Network Alliance) media streaming on my home network and VPN connections.  I need these features in my Windows 7 Home Premium 64 bit guests and clients Ubuntu.  Windows 7 firewall cannot determine enough about VMware network adapters, the labels 'unidentified' and public brand!  Perhaps it is because I am visually impaired and use screen readers, but I'm not able to define these connections as private or disable the firewall for these connections.  If I disable these adaptors or uninstall Workstation, these features work perfectly.  Of course, this will not allow these characteristics never to work in a guest and is not a viable solution for the Windows host either.  Does anyone have a solution to know how to enable VMware networks bypass bad decisions of Microsoft network design?

  Take a look at: Troubleshooting blocked incoming network traffic on Windows Vista or later after installing a VMware product

  I would like to use the instructions in the section "redefine the NIC virtual VMware as endpoint devices ' VMware KB article.

• Aerender.exe CS5 does not close after completing a project

  We are short aerender.exe from the command line on a report server. Projects that we send to it have been completed and produce an output file to return successfully, but the blocking of the process rather than going out automatically. At this point, the Task Manager shows the aerender.exe and AfterFX.com still work. If another project is started, it creates a new instance of aerender.exe rather than using the existing one. If the command prompt window is closed manually, aerender.exe and AfterFX.com will also end.

  Here is an example of the command line used:

  "C:\Program Files\Adobe\Adobe after effects CS5\Support Files\aerender.exe" - project (network path) \textTest.aep-comp text s 1 EI 30 - v ERRORS_AND_PROGRESS

  We also tried running projects directly on the hard drive of the rendering server to ensure that it is not a network problem, but the same thing happens. There is no error message in the command prompt, and no windows don't pop up outside the command line to indicate that there was a problem. I also can't find not everything about the rendering process in the Windows event logs. It seems to me that it is waiting on input from the user, but I don't know exactly what input he wants.

  Does anyone have any suggestions on how I can determine why the process is not closed correctly? Is there a flag missing from the command line, we use?

  Thank you

  Grant

  I found the solution to this problem!

  I found that it was the Matrox codec that was installed to be the culprit for the shot to the top.

  If you do not have this codec installed... then I delete all 3rd party codecs and see if that fixes it.

  Note: Be sure to kill the process AE first before uninstalling the codecs because that will trigger an automatic system reboot.

  Once that they are uninstalled, run a command-line rendering test after installation of each codec to see if there are any other codecs that causes this problem.

  I hope this helps.

  -Steve

• FileReferenceList does not return a complete event

  Hello people of Forum!
  
  I have an application that downloads the files. A moment with FileReference file download works. No problems. But when I try to use FileReferenceList, objects in the FileReferenceList FileReference table do not return an Event.COMPLETE, when they finished. Both versions violate the same servlet, so I start from the principle that there should not be no problem on the receiving end. When I throw in debugging code, I see the return of open FileReferenceList object and progress events, but never a full event. Here is what my code does:
  
  The user clicks on the 'Browse' button and selects the files. When they're done, the button is clicked "Upload" and they clicked. I make a few calls to a database to retrieve identifiers of document and then I go through the download process:
  
  var fileReference:FileReference = FileReference (this.uploadFileArray.pop ());
  fileReference.addEventListener (Event.OPEN, traceEvent);
  fileReference.addEventListener (Event.COMPLETE, completeEvent);
  fileReference.addEventListener (IOErrorEvent.IO_ERROR, traceEvent);
  fileReference.addEventListener (ProgressEvent.PROGRESS, progressEvent);
  fileReference.addEventListener (SecurityErrorEvent.SECURITY_ERROR, traceEvent);
  var req:URLRequest = new URLRequest (endpoint + paramString);
  Req.Method = URLRequestMethod.POST;
  fileReference.upload (req, "whatever", false);
  progressBar.label = "Loading"... » ;
  btnCancelFile.enabled = true;
  
  Here is my 'complete' event handler:
  
  private void completeEvent(event:Event):void {}
  mx.controls.Alert.show ("completed event.");
  traceEvent (event);
  }
  
  
  I'm pretty much after the code of the language reference. The complete event is blocked or am I completely missed something obvious?
  
  I'll take suggestions or advice! Thanks in advance for the help!
  
  -Andy
  

  It seems that unless you keep a handle on the FileReference, flash will clean memory engine object it real quick. Which is what is happening here - even if the files were sent to the servlet without problem, the garbage collector has been sucking the FileReference objects until they could send the complete event.

  So the solution here was to place the FileReference object in a table just before download command and then remove it from the table when the end event is raised, so that garbage collection can collect timely.

  It was in fact in the documentation somewhere, but for some reason it didn't register only.

  Anyhoo... He is a good example of what to do about the specifications of lang in the FileReferenceList page under examples.
  http://livedocs.Macromedia.com/Flex/2/langref/index.html

  Hope this helps... someone. :-)
  -Andy

• Artist does not marking

  Hi all, I just bought my Sansa Fuze (I got a front e250r).  I dragged and it deleted all my music files (mp3, for the most part) and they play very well.  I'm running a PC with XP.  The song title tags came through very well.

  However, none of my artist tags are appearing (all are 'Unknown').  I went through all my files before the task to make sure that all the file names were correct and Stamp ID3 Tag Editor to make sure that all the artists were there (and always spelled).  I have no problems with it on my e250r.

  I browsed the forum and found a couple of 'techno' in-depth discussions, but nothing that I understand.

  Any help would be appreciated!  Thank you.

  Melissa

  I have it...

  I was on a cruise on the rest of the forum and found a thread on the connection to the car radio, who spoke: settings, Control Panel, USB Mode - the default value is 'AutoDetect', it must be set to "MASTER", there were a few other threads that talked about this mode also, but I have not so far.

  I have changed the setting of MSC, stripped of all my music of the "rocket", fixed all the marking of MP3Tag and recharged through song, and poof, all my artist tags are there.

  Yes!