LMS v4.0 log files

Similar Questions

• Rollback segment and log files

  Hello everyone,
  
  I have a question that intrigues me because I learned the concepts of Directors Oracle.
  
  Indeed, when a user sends a query to update (for example), server process writes in the DB the old and the new snapshot buffer cache data. He wrote the same thing in an entry form redo in the redo log buffer.
  
  Now, if the DBW is triggered before POSTING (it is possible of course), it will write the dirty block in the data file. He wrote the old cliché in a rollback segment and the new in a segment of the table. But just before that, he sends a message to the LGWR to write the corresponding entries in the redo log files.
  
  What I don't understand, is the use of the LGWR writes? Indeed, if the system breaks down at this moment, we drive the old snapshot of the data (in the rollback segment) and recovery can be performed correctly! Why do two writings of the same information in the disk in same instant; the one in the data file and the other in the log file.
  
  Thank you for the answers in advance, I hope that I was clear!

  I thought that when the DBWR is triggered, it writes ALL the blocks Sales

  Lol not always, not often 'ALL '.
  The DBWR follows a list of stamp Sales. May be asked to do a writing by a process that cannot find a tampon without (once again, that the process may not have really looked through the LMS together, only up to N buffers). DBWR doesn't then write ALL buffers Sales.

  Also, remember even when the DBWR writes all buffers, it takes time to write. He does NOT order written by "undo and table / index of a single transaction set. He just does not care if a dirty buffer's undo or a block table or index.

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  Just a log message system that does not mean nothing, except an engineer. If you don't know what mean the entries in log file, and then save your time and forget about unless you have serious problems.

• Quickly fill out log files

  I noticed that whenever I have mount smbfs sharing wireless does not work after a few minutes and must be reset. Log files seem to be filled quickly upward.
  Demon and sys log contains similar lines.
  2 jan 21:51:34 NetworkManager TOSHIBA-User: "supplicant" changed state: 0
  2 jan 21:51:40 TOSHIBA - user NetworkManager: begging changed state: 1
  2 jan 21:53:48 TOSHIBA - user NetworkManager: begging changed state: 0
  2 jan 21:53:54 NetworkManager TOSHIBA-User: "supplicant" changed state: 1
  2 jan 21:56:03 NetworkManager TOSHIBA-User: "supplicant" changed state: 0
  2 jan 21:56:09 NetworkManager TOSHIBA-User: "supplicant" changed state: 1
  2 jan 21:58:10 user TOSHIBA gdmgreeter [21619]: Gtk-CRITICAL: gtk_tree_view_get_selection: assertion 'GTK_IS_TREE_VIEW (tree_view)' failed
  2 jan 21:58:10 user TOSHIBA gdmgreeter [21619]: Gtk-CRITICAL: gtk_tree_selection_unselect_all: assertion 'GTK_IS_TREE_SELECTION (sélection)' failed
  2 jan 21:58:10 user TOSHIBA gdmgreeter [21619]: Gtk-CRITICAL: gtk_tree_selection_select_iter: assertion 'GTK_IS_TREE_SELECTION (sélection)' failed
  2 jan 21:58:10 user TOSHIBA gdmgreeter [21619]: Gtk-CRITICAL: gtk_tree_view_scroll_to_cell: assertion 'GTK_IS_TREE_VIEW (tree_view)' failed
  2 jan 21:58:17 TOSHIBA - user NetworkManager: begging changed state: 0
  2 jan 21:58:23 NetworkManager TOSHIBA-User: "supplicant" changed state: 1
  2 jan 21:58:41 user TOSHIBA NetworkManager: lists wireless network enabled to update.
  2 22:00:31 jan NetworkManager TOSHIBA-User: "supplicant" changed state: 0
  2 jan 22:00:37 TOSHIBA - user NetworkManager: begging changed state: 1
  22:02:45 jan 2 NetworkManager TOSHIBA-User: "supplicant" changed state: 0

  This could have an impact on anther problem already registered

  Any ideas?

  malcolli

  Also read and check logs it seems that this may be two flaws.
  The NetwokManager and the Gnome Display Manager.

  Now, to learn more.

  malcolli

• How can I connect name BT IDS of devices in a log file by using the Toshiba BT stack

  Hello

  without Microsoft stack, I can't use a lot of freeware programs (BluetoothView.exe, BluetoothCL.exe, BTScanner for Windows), to 'catch up' bluetooth devices in a log file.

  How can I connect names bt ID/description of the devices in a logfile using the Toshiba Bluetooth stack?

  Thank you

  I don't know if there's a tool for that. However, it should be possible with some Bluetooth SDK controls.

• Mail creation of massive log files and stop the synchronization with the server

  Since the upgrade to El Capitan (10.11.1), Mail presents two problems persist:

  (1) it generates massive log files, e.g. 2015-12 - 03_IMAPSyncActivity.log these files regularly exceed 10 GB and block Mail and freeze the Mac. Mail can be over 8 GB of RAM. Once removed, Mail recreates the file and fills again, ends up doing more massive files that must also delete.

  (2) mail stop sync with my different IMAP e-mail servers. The only solution I've found that it completely delete the or the e-mail accounts and reinstalls the account. It works for a day (or even a few hours) before it just stops the synchronization, even if a connection test shows he connects with the server. This problem seems to occur on two e-mail accounts separately on two different servers / hosting companies, but not on my Gmail accounts.

  These two problems occur on both my iMac (21.5 ", mid-2011, 2.5 GHz Intel Core i5, 8 GB RAM) and MacBookPro (13', mid-2011, 2.5 GHz Intel core i5, 4 GB RAM).

  Full of ideas gratefully received!

  Thank you!

  Please take these steps to remove the mail folders 'sandbox '.

  Step 1

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Reveal

  the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

  Restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

  CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

  Step 2

  If step 1 does not resolve the problem, repeat with this line:

  ~/Library/Containers/com.apple.MailServiceAgent

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Question about a config/95 G log file: LabView_32_11.0_Lab.Admin_cur.txt

  Hello world

  One of our lab computers running Labview has been reported to be running out of storage and asked me to figure out why. I scratched through some windows folders to find the culprit, specifically folder: c:\users\Lab.Admin\AppData\Local\Temp where I found a 95 G file titled LabView_32_11.0_Lab.Admin_cur.txt, I noticed that the Lab.Admin is the user name and is also included in the name of the file, so I guess it's sort of config/log file for the current user.

  The file was too large for me to open and watch with no matter what program I had available so I just renamed, restarted Labview to check that it might be recreated then removed the bloated file. The newly created file has the following inside the itt:

  ####
  #Date: Wednesday, June 13, 2012 14:49
  #OSName: Windows 7 Professional
  #OSVers: 6.1
  #OSBuild: 7600
  #AppName: LabVIEW
  #Version: 11.0 32-bit
  #AppKind: FDS
  #AppModDate: 22/06/2011 18:12 GMT
  Base address of #LabVIEW: 0x00400000

  Can someone tell me the purpose of this file and what might have caused to grow to 95 G. I'm only interested in learning how to prevent it happening again.

  See you soon,.

  Alex

  Do you mean 95 gigabytes?  95 GB?

  I think that it's a crash dump file in the event where LabVIEW detects an error.  Could you have had a recent accident (perhaps several) where some large scale applications have been involved?

  You can use LabVIEW to open the file.  Write a small VI to open the text file, then just read a smaller number of bytes and display it in an indicator of the chain.

  I have several of these files in my temp directory from to the slightly different versions of LabVIEW installed.  But they are tiny, about 1 KB.

• Is it possible to edit the ultiboard log file (v10.1.1)?

  I made the mistake of removing parts of a design Ultiboard and will then mark them up a very different conception of Multisim. Now when I try to renumber all reference indicators and annotate back to Multisim, he wants to remove all items first and then make him renumber. It is with the version 10.1.1. Is it possible to edit the log file if it doesn't do the renumbering of part?

  Since this drawing took me 3 days to deliver, she really sucks if I start more can renumber parts.

  I thought that the answer would be no because I think they address this version 11. But I found a way to 'cleansing' of the log file. I created another design, just copied and pasted in the new design. At that time, I had the same exact design, with the same reference indicators and all traces of tact, but none of the nets. I've annotated front of Multisim and introduced all the nets without error. Now I have renumbered all parts and retro-annotation. He wanted to stick all over again but this time that Multisim just said "not supported - add part xxxx" which meant that there nothing done. But she made the reference of all changes of the indicator. Yay. Even if she was in trouble with multi-sectioned parts. He would get a right door, but the rest would be something different with "xx" in the reference indicator. As "Uxx6A". So all I had to do by clicking on the parties and select 'replace the component' and it will show the indicator just with a single gate used and I just had to select the same door.

  So problem solved.

• Change the column header in the log file

  Hi people,

  I have a small program running to collect and record the data in a file.

  The log files to a CSV file correctly, but the column headers show as "Untitled".

  How to set these to something meaningful?

  Had a hunting around, but can't find the settings.

  Any help gratefully received!

  See you soon

  Duncan

  Finally managed to find a Community position covering cela.

  Check out this post fior details:

  https://decibel.NI.com/content/docs/doc-10694

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• log file curious growing on rt-target

  Hello community,

  I have a pxi-time real-system that automatically records the events our network multicast and creates a log file that grows every minute.

  The file is named packetsIn.log and appears under/or-rt/system/ethernet.

  The content of the file is

  Source Mac:...

  Dest Mac:...

  PacketSize:...

  The mac addresses that appear in the file are not of my controller but some switches or multicast-addresses of our network.

  If you delete the file, it appears again a few seconds after the action. The file grows too, if no labview applications are running on the system.

  A that someone has noticed similar behaviour? What could cause the creation of this file?

  We use LabVIEW 2009 SP1 and the curious, it's, it appears only in one of our controllers.

  Hope someone could help me

  Ayoub

  Hi ayoub,.

  Please try opening the nor - rt.ini and the following entry set:

  [DEBUG]
  RTPacketParsingEnbled = FALSE

  After that the file should stop more.

  Best regards

  Lam

• I have can´t of the cbs.log file

  Hello world

  It seems that never ends, now it s the file cbs.log that says access denied.

  OK, after you have installed successfully (and finally) sp1 of vista, I ran once more the chkdsk and sfc/verifyonly to verify if everything was ok, as if it was before I ve installed sp1, which was: no no violation of the integrity of the errors found, files damaged, everything seemed just fine for me, but now After installing sp1, the sfc/verifyonly said that Windows found violations of integrity resources Protection and the details are in the cbs.log file, which I was able to access so far, but now, when I try to open it, it says "access denied" - what happened between that made the system go like that and can it be resolved?

  Anyway, desperate, I tried a sfc/scanow in the hope that it would solve this problem, this 'thing', well actually he pointed out that the Protection of Windows resources found and managed to repair damaged files and details could be found at c:\windows\logs\cbs\cbs.log, but as I said before when I try to open this file it says access denied.

  So I rebooted my pc and hope that everything would be ok, given that the sfc/scannow said that the files when repaired, so I thought. Unfortunately, that s not the way it is, after the reboot, I ran sfc/verifyonly, just to confirm that everything was actually ok, well it still signals once Windows Resource Protection found violations of integrity and the details can be found in the cbs.log file.

  Right now my computer seems to work very well, besides that of course, the problem is I m feling completely lost here with this 'thing', it just doesn't feel good and probably it's just me, maybe I m too picky about this stuff, everything must be running ok so I can be at rest with myself, please can someone help me with this , can someone explain me what is happenning, so I can understand it?

  I think that worst of all, at least for me, is not to know what is happening, it s as I have, I would even say obcessive, need to understand not only the solution but most of all the cause of it, the mechanism of it s, I need to understand the process, don't´t you all?

  Pleeaase helps.

  Well be Pedro Borba

  Pedro Borba,
  You must copy the CBS and paste it on your desktop or Documents folder.  Then, open the copied version of the file.  Here is an article which also gives instructions on reading and research the CBS log file.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• in the output log file bit 00's are added, why? (Do not run the attached vi. It disables all devices in your system)

  Hi all

  I've attached a zip file when co-existence.vi is the main file of vi that communicates with a USB device and returns some responses of ATR.

  The answers are stored in a log file. I have attached the log file. In the log file in three places while displaying ATR, get added some unwanted 00's. Please help me how it is and how to remove it?

  Thank you

  Mathan

  [Note: (not to run the attached vi.] It disables all devices in your system)].

  It seems that the duration depends on the value you get out of the dll (dwARTLen). You have wired it as 100, so it seems that the dll simply returns the entry. Maybe you want to check the documentation for the dll on the way to get the actual length.

  A large part of your code is very confusing...

  • You have several subVIs that are essentially the same, but with different names. Not one of these not enough?
  • What is the purpose of the loop IN the adhc.vi? Since you autoindex in a table of a line, it will be executed only once, and the result is the same as if you would remove the loop FOR.
  • Your main VI is extremely repetitive with lots of duplicate code. You have 12 instances of the file name constant, would be enough! Enable.VI is identical to disable.vi, except for a constant of diagram. Much the same constant string ("ATR: ', ' peripheral access card:", etc. "), once again, everyone is enough.

  Here a nice state machine would make all the difference.  You need only about 10% of the current code, eliminating all the rehearsals.

• AoE3 cannot create log files and will not run.

  AOE3 I installed on my machine. The game is stored on an external hard drive that is almost new and has yet to give me any problems. Whenever I try to launch the game, I get the following error "could not create the log file. Ensure that you have all rights in the directory where the Age of Empires III, and that you have available disk space. \n Erroe: access denied. »

  I am the only user of this computer, my account has full administrator access and there is more than a terabyte of disk space. I don't knopw not why there is no problem running this game - especially as all the other files on the road very well works.

  Any help would be greatly appreciated.

  Thank you.

  Delete the log file, "Age3Log.txt", which could give this error message from My Documents\My Games\Age of Empires 3 'folder.

  Try to delete this file as an administrator, and then click Connect.

  Girls. You never know what they think.

• Cannot install KB973688: error: Windows Setup: error opening installation log file

  Original title: cannot install KB973688

  After you download http://www.microsoft.com/downloads/en/details.aspx?FamilyId=00bcdf28-2299-4150-964d-88a601e25229&displaylang=en#Instructions

  I run the file and get the error message from Windows install: error opening installation log file. Verify that the specified log file location exists and is writable

  Hello

  Try this:

  Step 1: Run the file as administrator.

  a. right click on the downloaded installation file.

  b. Select run as administrator.

  c. then follow the installation wizard.

  Step 2: If it does not help, reset the windows updates and then try to install the update.

  How to reset the Windows Update components: http://support.Microsoft.com/kb/971058  

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.