log file curious growing on rt-target

Similar Questions

• Problems with 'Connection to the Site target' where is the log file?

  Hi all!

  I am VSphere replication deployment to 2 VCenter servers with 1 Center Server in a lab environment. I successfully deployed and saved VRM devices to both VCenter servers. I also installed the SRM agent on the same VCenters servers as well. Both plugins are appearing in both VCenter servers. When I try to connect to the site target either VCenter, I get the following error below after I click 'OK '. What log file should I look at to determine my problem?

  

  I solved this problem today.

  I had the two configuration of VCenter servers for both use TCP 8080 for HTTP traffic, I have uninstalled/reinstalled VCenter at both ends. I accepted the default 80 TCP HTTP this time and I was able to connect to my remote / targeted VCenter in the connections section.

  What is strange, is that the VRM devices said they used TCP 8080 to save the VRM instance/database on the Service Platform controller (VCenter) and recorded everything very well. I was able to perform very well with configured TCP 8080 local replication.

  My company has sometimes display TCP 80 a vulnerability and try to use other ports where possible.

• Question about a config/95 G log file: LabView_32_11.0_Lab.Admin_cur.txt

  Hello world

  One of our lab computers running Labview has been reported to be running out of storage and asked me to figure out why. I scratched through some windows folders to find the culprit, specifically folder: c:\users\Lab.Admin\AppData\Local\Temp where I found a 95 G file titled LabView_32_11.0_Lab.Admin_cur.txt, I noticed that the Lab.Admin is the user name and is also included in the name of the file, so I guess it's sort of config/log file for the current user.

  The file was too large for me to open and watch with no matter what program I had available so I just renamed, restarted Labview to check that it might be recreated then removed the bloated file. The newly created file has the following inside the itt:

  ####
  #Date: Wednesday, June 13, 2012 14:49
  #OSName: Windows 7 Professional
  #OSVers: 6.1
  #OSBuild: 7600
  #AppName: LabVIEW
  #Version: 11.0 32-bit
  #AppKind: FDS
  #AppModDate: 22/06/2011 18:12 GMT
  Base address of #LabVIEW: 0x00400000

  Can someone tell me the purpose of this file and what might have caused to grow to 95 G. I'm only interested in learning how to prevent it happening again.

  See you soon,.

  Alex

  Do you mean 95 gigabytes?  95 GB?

  I think that it's a crash dump file in the event where LabVIEW detects an error.  Could you have had a recent accident (perhaps several) where some large scale applications have been involved?

  You can use LabVIEW to open the file.  Write a small VI to open the text file, then just read a smaller number of bytes and display it in an indicator of the chain.

  I have several of these files in my temp directory from to the slightly different versions of LabVIEW installed.  But they are tiny, about 1 KB.

• Foglight monitoring log file

  Hi all

  We use the IC 5.6.7 cartridge for our monitoring infra goal. We have a requirement for the windows log file monitoring so that we can trigger alerts based on the words and we have not inherited cartridge more.

  Can we control logs using IC cartridge or any separate available for monitoring log files?

  Please let us know those required as we need.

  Kind regards

  Guenoun

  If it's just normal newspaper followed, you can use the logfilter officer but which does not require a fglam on the computer running target

  http://en.community.Dell.com/TechCenter/performance-monitoring/Foglight-administrators/w/Admins-wiki/5646.monitoring-application-availability-using-Foglight-utility-agents

  Best regards

  Golan

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you

• Monitor log file for Netbackup

  Hello

  We seek to monitor Netbackup backup errors in Foglight and I was wondering the best way to go about it.  In essence the software Netbackup written in a file (C:\Program Files\Legato\nsr\logs\backup_failure.log) and I want to draw attention when we get some messages, such as "Impossible" or "unsuccessful save sets. I tried to use the logfilter legacy agent, but this doesn't seem to work or I set up correctly.  No matter which help out me?  Also, everything what we use, that we will be able to draw the line complete or just be a generic alarm syaing "there is a problem with a nackup of netbackup" kind of thing?

  All advice appreciated.

  Thank you

  Davie

  Hey Davie,

  The LogFilter legacy agent is probably the best way to control this log file. Here's and example of how to configure the list of game:

  

  For your case, you should be able to enter "Down" and "Unsuccessful save sets" on separate lines in the Match string column, and then matched with the appropriate alarm severities.

  The resulting configuration alarms like this:

  

  The alarm message reports the first 255 characters of the corresponding journal line.

  After setting up and activation of the LogFilter agent, check the agent log to verify that he was able to find and read the target log file.

  Kind regards

  Brian Wheeldon

• Generic Unix 11.1.1.7.0 - blank log file connector

  Hello

  We installed the generic Unix 11.1.1.7.0 for IOM 11.1.1.5.4 connector. The connector works well, but there is no log occurs in the log file. After doing configurations as described in the document to the activation of logging, the log file is generated, but there is no paper inside message. Even if you try with details of incorrect connection to the target. Exceptions are seen in the server logs, but not in the Connector log file.

  Here are the contents of my logging.xml file

  <? XML version = "1.0" encoding = "UTF-8"? >
  < logging_configuration >
  < log_handlers >

  < name log_handler = "console-handler" class = 'oracle.core.ojdl.logging.ConsoleHandler' format ='oracle.core.ojdl.weblogic.ConsoleFo
  jonhino ' level = "WARNING: 32" / >

  < name log_handler = "odl-handler" class = 'oracle.core.ojdl.logging.ODLHandlerFactory' filter ='oracle.dfw.incident.IncidentDetectionLo
  gFilter ">"
  < property name = "path" value='${domain.home}/servers/${weblogic. Name} /logs/$ {weblogic. Name} - diagnostic.log "/ >"
  < property name = value 'maxFileSize' = ' 10485760 "/ >"
  < property name = "maxLogSize" value = "104857600" / >
  < property name = value "encoding" = "UTF - 8" / > ".
  < property name = "useThreadName" value = "true" / >
  < property name = "supplementalAttributes" value ='J2EE_APP.name, J2EE_MODULE.name, WEBSERVICE.name, WEBSERVICE_PORT.name, composite_inst
  ance_id, component_instance_id, composite_name, name of the component "/ >"
  < / log_handler >

  < name log_handler = 'wls-domain' class = 'oracle.core.ojdl.weblogic.DomainLogHandler' level = "WARNING" / >

  < name log_handler = "message-GOSA-handler" class = "oracle.core.ojdl.logging.ODLHandlerFactory" > "
  < property name = "path" value='${domain.home}/servers/${weblogic. Name} / logs/GOSA/msglogging "/ >"
  < property name = value 'maxFileSize' = ' 10485760 "/ >"
  < property name = "maxLogSize" value = "104857600" / >
  < property name = value "encoding" = "UTF - 8" / > ".
  < property name = "supplementalAttributes" value='J2EE_APP.name,J2EE_MODULE.name,WEBSERVICE.name,WEBSERVICE_PORT.name'/ >
  < / log_handler >

  < name log_handler = em-journal-Manager ' level = ' NOTIFICATION: 32 ' class = 'oracle.core.ojdl.logging.ODLHandlerFactory' filter ='oracle.dfw.i
  preloaded. IncidentDetectionLogFilter ">"
  < property name = "path" value='${domain.home}/servers/${weblogic. Name}/SYSMAN/log/eMoms.log'/ >
  < property name = value 'format' = "ODL-Text" / >
  < property name = "useThreadName" value = "true" / >
  < property name = value 'maxFileSize' = ' 5242880 "/ >"
  < property name = value 'maxLogSize"=" 52428800 "/ >"
  < property name = value "encoding" = "UTF - 8" / > ".
  < / log_handler >

  < name log_handler = em-trc-Manager ' level = "TRACE: 32" class = "oracle.core.ojdl.logging.ODLHandlerFactory" > "
  < property name ='logreader: "value ="off"/ >"
  < property name = "path" value='${domain.home}/servers/${weblogic. Name}/SYSMAN/log/eMoms.trc'/ >
  < property name = value 'format' = "ODL-Text" / >
  < property name = "useThreadName" value = "true" / >
  < property name = "local" value = "fr" / >
  < property name = value 'maxFileSize' = ' 5242880 "/ >"
  < property name = value 'maxLogSize"=" 52428800 "/ >"
  < property name = value "encoding" = "UTF - 8" / > ".
  < / log_handler >

  < name log_handler = "unix-handler" level = "NOTIFICATION: 1" class = "oracle.core.ojdl.logging.ODLHandlerFactory" > "
  < property name ='logreader: "value ="off"/ >"
  < property name = "path" value='${domain.home}/servers/${weblogic. Name}/logs/unixConnector.log'/ >
  < property name = value 'format' = "ODL-Text" / >
  < property name = "useThreadName" value = "true" / >
  < property name = "local" value = "fr" / >
  < property name = value 'maxFileSize' = ' 5242880 "/ >"
  < property name = value 'maxLogSize"=" 52428800 "/ >"
  < property name = value "encoding" = "UTF - 8" / > ".
  < / log_handler >

  < / log_handlers >

  <>recorders

  < name of creator = "" level = "WARNING: 1" > "
  < manager name = 'Manager of odl' / >
  < manager name = 'wls-domain' / >
  < manager name = "console-handler" / >
  < / recorder >

  < name = 'org.identityconnectors.genericunix logger' level = ' NOTIFICATION: 1 "useParentHandlers ="false">
  < manager name = "unix-handler" / >
  < manager name = "console-handler" / >
  < / recorder >

  < name = "oracle.iam.connectors.icfcommon logger" level = "NOTIFICATION: 1" useParentHandlers = "false" > "
  < manager name = "unix-handler" / >
  < / recorder >

  < creator name = 'oracle' level = ' NOTIFICATION: 1 "/ >

  < name = "oracle.adf" / recorder >
  < name="oracle.adf.desktopintegration"/ recorder >
  < name="oracle.adf.faces"/ recorder >
  < name="oracle.adf.controller"/ recorder >
  < name = "oracle.adfinternal" / recorder >
  < name="oracle.adfinternal.controller"/ recorder >
  < name = "oracle.jbo" / recorder >
  < name = "oracle.adfdt" / recorder >
  < name = "oracle.adfdtinternal" / recorder >

  < name = "oracle.bam" / recorder >
  < name="oracle.bam.adapter"/ recorder >
  < name="oracle.bam.common"/ recorder >
  < name="oracle.bam.system"/ recorder >
  < name="oracle.bam.middleware"/ recorder >
  < name="oracle.bam.adc.security"/ recorder >
  < name="oracle.bam.common.security"/ recorder >
  < name="oracle.bam.adc.ejb.BamAdcServerBean"/ recorder >
  < name="oracle.bam.reportcache.ejb.ReportCacheServerBean"/ recorder >
  < name="oracle.bam.eventengine.ejb.EventEngineServerBean"/ recorder >
  < name="oracle.bam.ems.ejb.EMSServerBean"/ recorder >
  < name="oracle.bam.adc.api"/ recorder >
  < name="oracle.bam.adc"/ recorder >
  < name="oracle.bam.eventengine"/ recorder >
  < name="oracle.bam.ems"/ recorder >
  < name="oracle.bam.webservices"/ recorder >
  < name="oracle.bam.web"/ recorder >
  < name="oracle.bam.reportcache"/ recorder >

  < name = "oracle.bpm" / recorder >
  < name="oracle.bpm.analytics"/ recorder >
  < name = "oracle.integration" / recorder >
  < name="oracle.integration.platform.blocks.cluster"/ recorder >
  < name="oracle.integration.platform.blocks.deploy.coordinator"/ recorder >
  < name="oracle.integration.platform.blocks.event.saq"/ recorder >
  < name="oracle.integration.platform.blocks.java"/ recorder >
  < name="oracle.integration.platform.faultpolicy"/ recorder >
  < name="oracle.integration.platform.testfwk"/ recorder >
  < name = "oracle.soa" / recorder >
  < name="oracle.soa.adapter"/ recorder >
  < name="oracle.soa.b2b"/ recorder >
  < name="oracle.soa.b2b.apptransport"/ recorder >
  < name="oracle.soa.b2b.engine"/ recorder >
  < name="oracle.soa.b2b.repository"/ recorder >
  < name="oracle.soa.b2b.transport"/ recorder >
  < name="oracle.soa.b2b.ui"/ recorder >
  < name="oracle.soa.bpel"/ recorder >
  < name="oracle.soa.bpel.console"/ recorder >
  < name="oracle.soa.bpel.engine"/ recorder >
  < name="oracle.soa.bpel.engine.activation"/ recorder >
  < name="oracle.soa.bpel.engine.agents"/ recorder >
  < name="oracle.soa.bpel.engine.bpel"/ recorder >
  < name="oracle.soa.bpel.engine.compiler"/ recorder >
  < name="oracle.soa.bpel.engine.data"/ recorder >
  < name="oracle.soa.bpel.engine.delivery"/ recorder >
  < name="oracle.soa.bpel.engine.deployment"/ recorder >
  < name="oracle.soa.bpel.engine.dispatch"/ recorder >
  < name="oracle.soa.bpel.engine.sensor"/ recorder >
  < name="oracle.soa.bpel.engine.translation"/ recorder >
  < name="oracle.soa.bpel.engine.ws"/ recorder >
  < name="oracle.soa.bpel.engine.xml"/ recorder >
  < name="oracle.soa.bpel.entity"/ recorder >
  < name="oracle.soa.bpel.jpa"/ recorder >
  < name="oracle.soa.bpel.system"/ recorder >
  < name="oracle.soa.dvm"/ recorder >
  < name="oracle.soa.management.facade.api"/ recorder >
  < name="oracle.soa.mediator"/ recorder >
  < name="oracle.soa.mediator.common"/ recorder >
  < name="oracle.soa.mediator.common.cache"/ recorder >
  < name="oracle.soa.mediator.common.error"/ recorder >
  < name="oracle.soa.mediator.common.error.recovery"/ recorder >
  < name="oracle.soa.mediator.common.message"/ recorder >
  < name="oracle.soa.mediator.dispatch"/ recorder >
  < name="oracle.soa.mediator.dispatch.resequencer.toplink"/ recorder >
  < name="oracle.soa.mediator.filter"/ recorder >
  < name="oracle.soa.mediator.instance"/ recorder >
  < name="oracle.soa.mediator.management"/ recorder >
  < name="oracle.soa.mediator.metadata"/ recorder >
  < name="oracle.soa.mediator.monitor"/ recorder >
  < name="oracle.soa.mediator.resequencer"/ recorder >
  < name="oracle.soa.mediator.resequencer.besteffort"/ recorder >
  < name="oracle.soa.mediator.resequencer.fifo"/ recorder >
  < name="oracle.soa.mediator.resequencer.standard"/ recorder >
  < name="oracle.soa.mediator.service"/ recorder >
  < name="oracle.soa.mediator.serviceEngine"/ recorder >
  < name="oracle.soa.mediator.transformation"/ recorder >
  < name="oracle.soa.mediator.utils"/ recorder >
  < name="oracle.soa.mediator.validation"/ recorder >
  < name="oracle.soa.scheduler"/ recorder >
  < name="oracle.soa.services.common"/ recorder >
  < name="oracle.soa.services.identity"/ recorder >
  < name="oracle.soa.services.notification"/ recorder >
  < name="oracle.soa.services.rules"/ recorder >
  < name="oracle.soa.services.rules.obrtrace"/ recorder >
  < name="oracle.soa.services.workflow"/ recorder >
  < name="oracle.soa.services.workflow.common"/ recorder >
  < name="oracle.soa.services.workflow.evidence"/ recorder >
  < name="oracle.soa.services.workflow.metadata"/ recorder >
  < name="oracle.soa.services.workflow.persistency"/ recorder >
  < name="oracle.soa.services.workflow.query"/ recorder >
  < name="oracle.soa.services.workflow.report"/ recorder >
  < name="oracle.soa.services.workflow.runtimeconfig"/ recorder >
  < name="oracle.soa.services.workflow.soa"/ recorder >
  < name="oracle.soa.services.workflow.task"/ recorder >
  < name="oracle.soa.services.workflow.task.dispatch"/ recorder >
  < name="oracle.soa.services.workflow.task.routing"/ recorder >
  < name="oracle.soa.services.workflow.user"/ recorder >
  < name="oracle.soa.services.workflow.verification"/ recorder >
  < name="oracle.soa.services.workflow.worklist"/ recorder >
  < name="oracle.soa.services.workflow.performance"/ recorder >
  < name="oracle.soa.services.cmds"/ recorder >
  < name="oracle.soa.wsif"/ recorder >
  < name="oracle.soa.xref"/ recorder >

  < name = "oracle.ucs" / recorder >
  < name = "oracle.sdp" / recorder >
  < name = "oracle.sdpinternal" / recorder >
  < name="oracle.sdp.messaging"/ recorder >
  < name="oracle.sdp.messaging.client"/ recorder >
  < name="oracle.sdp.messaging.driver"/ recorder >
  < name="oracle.sdp.messaging.engine"/ recorder >
  < name="oracle.sdp.messaging.parlayx"/ recorder >
  < name="oracle.sdp.messaging.server"/ recorder >

  < name = "oracle.wsm" / recorder >

  < name = "oracle.wsm.msg.logging logger" level = "NOTIFICATION: 1" useParentHandlers = "false" > "
  < manager name = "GOSA-message Manager" / >
  < manager name = 'wls-domain' / >
  < / recorder >

  < name = 'oracle.sysman logger' level = ' NOTIFICATION: 32 "useParentHandlers ="false">
  < manager name = em-journal-Manager "/ >"
  < manager name = em-trc-Manager "/ >"
  < / recorder >

  < / recorders >
  < / logging_configuration >

  Let me know if I missed any configuration.

  Concerning

  Cédric Michel

  This has been resolved. Use the Patch 14271576.

• Where is rapidwiz log file in R12?

  Hello:

  I installed battery tech R12.1.3 only on Linux with rapidwiz some time ago. Now, I want to find the log file. Could you please tell me where is it?

  Thanks and regrads

  2625331 wrote:

  I need to copy the source instance APPL_TOP toward the target. How are you?

  Thank you.

  There are many available OS commands to achieve this goal (such as "cp-r", "tar", "scp",...) (etc) - http://www.oracle-base.com/articles/linux/linux-archive-tools.php

  I suggest you create a tar on the source instance file, using "scp" to copy it to the target node, then extract the tar file (commands are available in the link above).

  Thank you

  Hussein

• Is it safe to delete the log file in/private/var/log/vnetlib?

  [Fusion 4.1.2 / Lion 10.7.4]

  My vnetlib log file is greater than 22 MB in size and has > K 250 lines of entries dating back to September 2011. Is it safe to delete this log file? A planning at startup, remove the file and then do a restart immediately after to restart VMWare network components - and we hope to recreate a new empty file. I tried erasing the contents of the file via the Terminal but do not have sufficient permissions, even with sudo - guess it was because the VMWare networking processes running at the time.

  Thank you

  John

  If you do not experience network problems, then it is safe to delete.

  I had no problem to remove in a Terminal (while VMware Fusion is running) by using the following command in (although I would recommend VMware Fusion of closing first and it doesn't have to be done in safe mode).

  sudo rm -f /var/log/vnetlib
  

  Just curious, what the big problem is why you want to delete, 22 MB is not that big a deal.

• GoldenGate Initial load to only generate log file

  Hi all

  OS version: Oracle Linux 6

  Version GG: 11.2.1.0.6

  We implement in our env Setup GG, where trail source files will be urged to target and tool Abinitio target read gg track files (via abinitio plug) and load data in the target of Teradata Database incremental. We have an obligation to initial charge of small tables, for this we intend to use gg.

  Is it possible to generate the initial load of GG in the form of files (canonical format IE gg native format) of the track at the source and sent to target where target Abinitio will use same files to load into the Teradata Database.

  AM trying as follows with our replicat but it does not work

  EXTRACT TEST_INI

  SOURCEISTABLE

  Username Ggate, PASSWORD ggate

  RMTHOST SEC12_SEC, MGRPORT 7809

  RMTTRAIL ./dirdat/VC

  TABLE GGATE. TEST1;

  Thanks in advance.

  
  Concerning

  KVM

  MVK,

  So you say that the extract stopped and that's all that is in the report file? It does not even show that it had tried to connect to the remote system. An other INFO and VIEW the REPORT to verify that it has not progressed further. Check the ggserr.log on the source and remote systems. Looking for a gglog .dmp -file in the install OGG on the source directory.

  Best regards

  Mary

• External table - load a log file with more than 4000 bytes per column

  Hello
  I'm trying to import a log file into a database table that has a single column: txt_line
  In this column, I'm trying to fill out a log by record type entry. Each log entry is normally more than 4000 bytes in the outer table, it should be a clob.
  Below is a table of external work that works, but cut all entries after 4000 bytes. How is it is possible to directly load the data into a clob column? All I've found are descriptions where I have a clob-file by file.
  Any help is appreciated
  Thank you
  
  
  
  Source file
  .. more than 4000 bytes...]] .. .more Quen 4000 bytes...]] .. more than 4000 bytes.
  
  ]] ist the record delimiter
  
  External table:
  create the table TST_TABLE
  (
  txt_line varchar2 (4000)
  )
  external organization
  (type
  ORACLE_LOADER
  the default directory tmp_ext_tables
  (settings) access
  records delimited by a "]]"
  fields (txt_line char (4000))
  )
  location ("test5.log")
  )
  reject the limit 0
  ;

  user12068228 wrote:

  I'm trying to import a log file into a database table that has a single column: txt_line
  In this column, I'm trying to fill out a log by record type entry. Each log entry is normally more than 4000 bytes in the outer table, it should be a clob.
  Below is a table of external work that works, but cut all entries after 4000 bytes. How is it is possible to directly load the data into a clob column? All I've found are descriptions where I have a clob-file by file.
  Any help is appreciated
  . . . E t c...

  And what did you expect if you define the field source and target column as 4000 characters?

  Try this:

  CREATE TABLE tst_table
   (
     txt_line CLOB
   )
   ORGANIZATION EXTERNAL
   (TYPE oracle_loader
      DEFAULT DIRECTORY tmp_ext_tables
      ACCESS PARAMETERS (
         RECORDS DELIMITED BY ']]'
         FIELDS (txt_line CHAR(32000))
      )
    LOCATION ('test5.log')
   )
  REJECT LIMIT 0
  ;
  

  8 2

• Can I remove this log file?

  Hello. Can I remove:
  
  < oracleforms_home > /j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/server.log
  
  .. .in to free up space on our filesystem apps? This will cause the accidents of Web Forms? I have to recreate after you delete it or it will recreate itself?
  
  Is there all the other log files that comes to develop and grow I can delete to free up space?
  
  Thanks in advance.

  Yes, I mean these files. I'm sorry that I didn't specify more precisely.

  We remove all these files log for about 2 years now and never had any problems.

  Markus

• mod_wl_ohs_0202.log continue to grow

  11.1.0.1.0 grid control installed on Redhat 5.2. The reposotory database is Oracle 11.2.0.2 on the same Linux machine.
  File /u01/app/gc_inst/WebTierIH1/diagnostics/logs/OHS/ohs1/mod_wl_ohs_0202.log continues to grow, 6.5 GB after 6 months. renamed the file and created a vacuum mod_wl_ohs_0202.log. But the the old file still gets written. Not sure if I need to delete the file.
  
  What is the best practice for managing this file to avoid it grow too big?
  
  Thank you

  Please see the article-ID

  11 G Grid Control Performance: Webtier log - mod_wl_ohs.log home of the WHO is very large in size and no rotation [1271676.1 ID]

  MOS...

  HTH

• Log file for the build process?

  Is there a log file is written for a project is resting at a particular target? I'm testing my X 5 project within the HR 6 Trial Version and it crashes at halfway through the step of updating the files to create a HTML Help (CHM) file.
  
  Examples of projects that come with RH 6 compile fine, so I think there is a problem with my project, that he dislikes; I'm trying to track down what exactly.
  
  A log file would be much faster than my current approach, which is to mark files as print only until it generates without errors, then slowly removing only conditional printing and reconstruction to find the problem...
  
  I know a log is created during the build process in the tab Output within HR, but when the application crashes, I can not to see him. This information is stored outdoors somewhere?
  
  

  I looked into the temporary output folder in the appropriate subdirectory! SSL! but it seems that all the files are there. In any case, I'm fairly certain that I encounter the same problem as Peter mentioned in his post on compiling conditional tags and merged tables. I made a version without tags compilation conditional and things worked well. With conditional compilation tags, I always get the crash.

  Tags of conditional compilation and Bug of table cells merged

• synchronization of log file event

  Hi all
  
  
  We use Oracle 9.2.0.4 on SUSE Linux 10. In the statspack report, one of the best timed event is

  log file sysnc

  We are in the process. We do not use any storage.IS this a bug of 9.2.0.4 or what is the solution of it
  

  STATSPACK report for
  
  DB Name         DB Id    Instance     Inst Num Release     Cluster Host
  ------------ ----------- ------------ -------- ----------- ------- ------------
  ai          1495142514 ai                1 9.2.0.4.0   NO      ai-oracle
  
              Snap Id     Snap Time      Sessions Curs/Sess Comment
              ------- ------------------ -------- --------- -------------------
  Begin Snap:     241 03-Sep-09 12:17:17      255      63.2
    End Snap:     242 03-Sep-09 12:48:50      257      63.4
     Elapsed:               31.55 (mins)
  
  Cache Sizes (end)
  ~~~~~~~~~~~~~~~~~
                 Buffer Cache:     1,280M      Std Block Size:         8K
             Shared Pool Size:       160M          Log Buffer:     1,024K
  
  Load Profile
  ~~~~~~~~~~~~                            Per Second       Per Transaction
                                     ---------------       ---------------
                    Redo size:              7,881.17              8,673.87
                Logical reads:             14,016.10             15,425.86
                Block changes:                 44.55                 49.04
               Physical reads:              3,421.71              3,765.87
              Physical writes:                  8.97                  9.88
                   User calls:                254.50                280.10
                       Parses:                 27.08                 29.81
                  Hard parses:                  0.46                  0.50
                        Sorts:                  8.54                  9.40
                       Logons:                  0.12                  0.13
                     Executes:                139.47                153.50
                 Transactions:                  0.91
  
    % Blocks changed per Read:    0.32    Recursive Call %:    42.75
   Rollback per transaction %:   13.66       Rows per Sort:   120.84
  
  Instance Efficiency Percentages (Target 100%)
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              Buffer Nowait %:  100.00       Redo NoWait %:  100.00
              Buffer  Hit   %:   75.59    In-memory Sort %:   99.99
              Library Hit   %:   99.55        Soft Parse %:   98.31
           Execute to Parse %:   80.58         Latch Hit %:  100.00
  Parse CPU to Parse Elapsd %:   67.17     % Non-Parse CPU:   99.10
  
   Shared Pool Statistics        Begin   End
                                 ------  ------
               Memory Usage %:   95.32   96.78    
      % SQL with executions>1:   74.91   74.37
    % Memory for SQL w/exec>1:   68.59   69.14
  
  Top 5 Timed Events
  ~~~~~~~~~~~~~~~~~~                                                     % Total
  Event                                               Waits    Time (s) Ela Time
  -------------------------------------------- ------------ ----------- --------
  log file sync                                      11,558      10,488    67.52
  db file sequential read                           611,828       3,214    20.69
  control file parallel write                           436         541     3.48
  buffer busy waits                                     626         522     3.36
  CPU time                                                          395     2.54
            -------------------------------------------------------------
  ^LWait Events for DB: ai  Instance: ai  Snaps: 241 -242
  -> s  - second
  -> cs - centisecond -     100th of a second
  -> ms - millisecond -    1000th of a second
  -> us - microsecond - 1000000th of a second
  -> ordered by wait time desc, waits desc (idle events last)
  
                                                                     Avg
                                                       Total Wait   wait    Waits
  Event                               Waits   Timeouts   Time (s)   (ms)     /txn
  ---------------------------- ------------ ---------- ---------- ------ --------                
  log file sync                      11,558      9,981     10,488    907      6.7
  db file sequential read           611,828          0      3,214      5    355.7
  control file parallel write           436          0        541   1241      0.3
  buffer busy waits                     626        518        522    834      0.4
  control file sequential read          661          0        159    241      0.4
  BFILE read                            734          0        110    151      0.4
  db file scattered read            595,462          0         81      0    346.2
  enqueue                                15          5         19   1266      0.0
  latch free                            109         22          1      8      0.1
  db file parallel read                 102          0          1      6      0.1
  log file parallel write             1,498      1,497          1      0      0.9
  BFILE get length                      166          0          0      3      0.1
  SQL*Net break/reset to clien          199          0          0      1      0.1
  SQL*Net more data to client         5,139          0          0      0      3.0
  BFILE open                             76          0          0      0      0.0
  row cache lock                          5          0          0      0      0.0
  BFILE internal seek                   734          0          0      0      0.4
  BFILE closure                          76          0          0      0      0.0
  db file parallel write                173          0          0      0      0.1
  direct path read                       18          0          0      0      0.0
  direct path write                       4          0          0      0      0.0
  SQL*Net message from client       480,888          0    284,247    591    279.6
  virtual circuit status                 64         64      1,861  29072      0.0
  wakeup time manager                    59         59      1,757  29781      0.0

  Your elapsed time is about 2000 seconds (31: 55 rounded up) - and your log file sync time is 10,000 - which is 5 seconds per second for the duration. Otherwise your session count is about 250 at the beginning and end of snapshot - so if we assume that the number of sessions is stable for the duration, each session has undergone 40 seconds synchronization log file in the meantime. You have saved roughly 1 500 operations in the meantime (0.91 per second, about 13 per cent of restorations) - so synchronize your time log file was on average more than 6.5 seconds by validation.

  Regardless of how you look at it, this suggests that numbers of synchronization of the log file are false, or you had a temporary outage. Given that you had some expectations occupied buffer and control file write expects about 900 m/s each, the hardware failure seems likely.

  Check log file parallel write times to see if this helps to confirm the hypothesis. (Unfortunately some platforms report liog, parallel wriite time of the files properly for earlier versions of 9.2 - so this may not help.)

  You also 15 enqueue waits with an average of 1.2 seconds - check the enqueue statistics in the report section to see what enqueue it was: if it was for example (CF - control file), then it also helps confirm the hypothesis of material.

  It is possible that you had a couple of resets of material or something like this in the meantime that stopped your system quite dramatically for a minute or two.

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  http://www.jlcomp.demon.co.UK

  "Science is more than a body of knowledge; It's a way of thinking. "
  Carl Sagan