Load a CSV file and access to variables

Hi guys,.

I am new to AS3 and treated with AS2 before (just to get the scope when change it).

Is it possible in AS3 to load an excel .csv file into Flash using the URLLoader (or?) and the data in the form of variables?

I can get the .csv to load and trace values (cell1, cell2, cell3...) but I do not know how to collect the data and place it into variables.

Can I create a table and access like so... MonTableau [0], myArray [1]? If so, I don't know why it does not work.

I have to be on the road quite wrong. Here's what I have so far...

var loader: URLLoader = new URLLoader();
loader.dataFormat = pouvez;
loader.addEventListener (Event.COMPLETE, dataLoaded);

var request: URLRequest = new URLRequest ("population.csv");
Loader.Load (request);
//...
function dataLoaded(evt:Event):void {}
var myData:Array = new Array (loader.data);
trace (mydata [i]);

}

Thanks for any help,

Sky

Simply load your csv file and use the string flash methods to allocate these values in a table:

var myDate:Array = loader.data.split(",");

Tags: Adobe Animate

Similar Questions

Load a CSV file into a table like in dataworkshop
Workshop of data has a function to load a CSV file and create a table based on it, the same, I want to create in my application.

I went through the forum http://forums.oracle.com/forums/thread.jspa?threadID=334988 & start = 60 & tstart = 0

but not able to download all the files (application, package HTMLDB_TOOLS and PAGE_SENTRY function) could not find the PAGE_SENTRY function.

AND when I open this link http://apex.oracle.com/pls/apex/f?p=27746

I could not run the application. I've provided a CSV file and when I click on SEND, I get the error:

ORA-06550: line 1, column 7: PLS-00201: identifier ' HTMLDB_TOOLS. PARSE_FILE' must be declared

tried in apex.oracle.com host as shown in the previous post.

any help pls..,.

Another method to load data into the tables..., (as dataworkshop)
Hello

I have check app works very well.

Have you read instructions?
Load a CSV file in a table
>
Create a small csv file as

col1, col2, col3
VARCHAR2 (10), Number, "Number (10.2)" "
Cat, 2, 3.2
dog, 99, 10.4
>
First row must have valid column names. To verify that your first line of titles have no spaces or those who are not words reserved.
Second line of the CSV file must have column of table data types.

When you meet these requirements app works perfectly

Kind regards
Jari

ODI - read CSV file and write to the Oracle table

Hello world
After 4 years, I started to work again with ODI, and I'm completely lost.
I need help, I don't know what to use for each step, interfaces, variables, procedures...
What I have to do is the following:
(1) reading a CSV file-> I have the topologies and the model defined
(2) assess whether there is a field of this CSV file in TABLE A-> who do not exist in the table is ignored (I tried with an interface joining the csv with the TABLE model a model and recording the result in a temporary data store)
Evaluate 3) I need to update TABLE C and if not I need to INSERT if another field that CSV exists in TABLE B-> if there
Could someone help me with what use?
Thanks in advance

Hi how are you?

You must:

Create an interface with the CSV template in the source and a RDBM table in the target (I'll assume you are using Oracle). Any type of filter or the transformation must be defined to be run in the stadium. (you must use a LKM for SQL file and add an IKM Sql control (it is best to trim them and insert the data when it cames to a file if you want after this process, you may have an incremental update to maintain history or something like that).)

For validation, you will use a reference constraints in the model of the oracle table: (for this you need a CKM Oracle to check constraints)

Then, you must select the table that you sponsor and in the column, you choose which column you will match.

To article 3, you repeat the above process.

And that's all. Pretty easy. If you do not have the two tables that you need to use your validation that you need to load before loading the CSV file you need valid.

Hope this can help you

Anyone has any experience of importing a csv file and store it in a database in MS SQL
Anyone has any experience of importing a csv file and store it in a database MS SQL. Outside sql injection there is any another converns security?
Draft of the steps.

1. use to download the file from the client to the server see
http://www.dennismiller.TV/index.cfm/2007/12/26/file-upload-using-ColdFusion-and-Flex

2. use to read the contents of the file into a variable.

3. perform a loop on the content of variables for each line, dealing with the variable as a list delimited by a newline rather then a comma

4. use list functions on each line to get the data you need, and then to transmit these data to SQL with CFQUERY or CFPROCPARAM.

Is there a way to select an area of some of the elements of a csv file and read in LabVIEW?

Hello everyone, I was wondering if there was a way to select only a certain "box" of the elements of a .csv file in LabVIEW? I have LabVIEW 2011 and my main goal is to take two tables and graphs against each other. I can import the .csv perfectly and separate each line and each column to be his own, but I have a 8 X 8 but want graphic in the middle of 4 X 5 or something like that. Is it possible to extract a table without starting at the beginning and end in the end? Thank you in advance.

Hi Szklanam,

as a CSV file is a TXT file with a different suffix, you can read a number of lines in this file. For example, you can limit the number of rows in your table of resultung. To limit the number of columns, you must always use an ArraySubset, so maybe it is much easier to read the complete CSV file and select interesting places with ArraySubset...

I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

Hello

I suggest you to please follow the steps described in the following articles and check if it helps.

"Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips

http://support.Microsoft.com/kb/812467

How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint

http://support.Microsoft.com/kb/973457

Let us know if it helps!

When upgrading to Windows XP SP3, Windows 7, it loads the temporary files, and then I got an error message saying "the install.wim file does not exist.

When the upgrade of xpsp3 for win 7 it loads the temporary files and 1 min in step 2? "" departure ": an error message appears that says install.wim file does not exist?

original title: problem installing win 7

Hello

You can't upgrade Windows XP to Windows 7.

Windows 7 upgrade paths

This document describes the upgrade paths that are supported and not supported for editions of the Windows® operating system 7.

Unsupported upgrade scenarios

Upgrade to Windows 7 from the following operating systems is not supported:
RTM of Windows 95, Windows 98, Windows Me, Windows XP, Windows Vista®, Windows Vista Starter, Windows 7 M3, Windows 7 beta, RC of Windows 7 or Windows 7 IDS
Windows NT® Server 4.0, Windows 2000 Server, Windows Server® 2003, Windows Server 2008 or Windows Server 2008 R2
Upgrades on place of several architectures (for example, x 86 to x 64) are not supported.
Place of cross-language upgrades (for example, en - us en - us) are not supported.
Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.
Upgrades from Windows Vista to Windows N, Windows K, Windows KN or Windows E are not supported.
Upgrades on place of type Cross-compiling (for example, the fre to chk) are not supported.
Pre-release in place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.

Supported upgrade scenarios

Company	Professional, company, full
Enterprise	Enterprise
Home Basic	Home Basic, Home Premium, Ultimate
Home Premium	Home Premium, ultimate edition
Ultimate	Ultimate

Enterprise	Enterprise
Home Basic	Home Basic
Home Premium	Home Premium
Professional	Professional
Starter (x 86 only)	Starter (x 86)
Ultimate	Ultimate

Home Basic	Home Premium, professional, ultimate edition
Home Premium	Professional, ultimate edition
Professional	Ultimate
Starter	Home Premium, professional, ultimate edition

files and folders: How can I load all my files and folders to my new account of my external hard drive?

Who can help, I just put a new account on my computer and deleted the old account. I backed up the old files on my external hard drive. I want to know is how can I load all my files and folders to my new account of my external hard drive? I thank you for your time and knowledge have a very nice evening, Shawn

Because it's a new account (even if with the same name), the restore procedure is unable to put files and folders in the same place, they came (because this place technically no longer - if yes, then the process is done and the transfer is complete). It can create a set of separate files (maybe even under a new user name, if it has been stored in this way). If so, all you need to do is copy the data as you would copy any other files and folders (not the main files of the user profile themselves but the data in them) on the new files in your user account and who will take care of the transfer. Here is more information about the restore procedure which may help you in the process.

Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right. It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course. But it teaches you a lot about what is possible and how to do it. It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

Restore files from a backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

Back up and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

I also found the following (but don't know if it of true or not):

1. after the start of "backup and Restore Center."

2. I chose "Advanced Restore"

3. I was did not an administrator password... maybe because my account is an administrator account.

4 choose "files from a backup made on a different computer.

5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

6. under the drop-down list box, select your drive/partition and continue

7. If all the backups on your drive, it will show a list of them.

8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

10. and you press "next".

11 guess what... no error!

12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

14. so that the next time see a mistake, try to continue with him... ;)

I don't know if this will help, but it does not provide much information about the process (when it works).

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Error: "Flight Simulator could not load some program files and will now leave." at the start of the game after installing the reduction acceleration expansion Pack.

Hi I just bought a copy of Microsoft Flight Simulator gold edition. and after installing and playing on the deluxe edition, I decided to add the extension of acceleration. and after installing the extension, the game no longer works it comes up with an error message saying "Flight Simulator could not load some program files and will now stop. Please reinstall Flight Simulator to restore or repair the installation of the program. ».

Now, after a few days looking for a response, I decided to ask the guy who made the game.

The error message also appears when I download just 2 service packs of Microsoft also.
I have a laptop HP 630 with a processor intel core i3 - 2350 m cpu @2. 30 ghz, 2 GB ram, windows 8 pro 64-bit

Original title: fsx gold edition...

Try this, it worked for me:

(1) uninstall normally from the control panel.

Reinstall 2) in the Windows directory (C: here)

(3) install SP1, SP2

Create a csv file and send it in an e-mail message

In coldfusion, is it possible to create a csv file and send it in an e-mail, without ever save this file on the hard drive?

Lol you can't attach a file to an e-mail, unless the file has been created.

We deal with this situation by creating the file in a directory designated for dynamically created files. Then we have a scheduled task that cleans all files over a certain age, every night.

How can I extract the data from a csv file and insert it into an Oracle table? (UTL_FILE)

Hi, please help me whit this query
Im trying to extrate the data in a file csv and im using the ULT_FILE package
I have this query that read the file and the first field, but if the field has a different length does not work as it should
For example if I had this .csv file:
1, book, laptop
2, pen, Eraser
3, notebook, paper
And in the table, I had to insert like this
ID descrption1 description2
laptop 1 book
Eraser pen 2
paper laptop 3
For now, I have this query, which displays only with DBMS:
Declare
-Variables
Cadena VARCHAR2 (32767).
Vfile UTL_FILE. TYPE_DE_FICHIER;
Dato varchar2 (200);                                             -Date
dato1 varchar2 (200);
dato2 varchar2 (200);
Identifier varchar2 (5): = ', ';                             -Identifier (en)
v_ManejadorFichero UTL_FILE. TYPE_DE_FICHIER;     -For exceptions
-Table variables
I_STATUS GL_INTERFACE. % OF STATUS TYPE.
I_LEDGER_ID GL_INTERFACE. TYPE % LEDGER_ID;
I_USER_JE_SOURCE_NAME GL_INTERFACE. TYPE % USER_JE_SOURCE_NAME;
I_ACCOUNTING_DATE GL_INTERFACE. TYPE % ACCOUNTING_DATE;
I_PERIOD_NAME GL_INTERFACE. TYPE % PERIOD_NAME;
I_CURRENCY_CODE GL_INTERFACE. CURRENCY_CODE % TYPE;
I_DATE_CREATED GL_INTERFACE. DATE_CREATED % TYPE;
I_CREATED_BY GL_INTERFACE. CREATED_BY % TYPE;
I_ACTUAL_FLAG GL_INTERFACE. TYPE % ACTUAL_FLAG;
I_CODE_COMBINATION_ID GL_INTERFACE. TYPE % CODE_COMBINATION_ID;
I_ENTERED_DR GL_INTERFACE. TYPE % ENTERED_DR;
I_ENTERED_CR GL_INTERFACE. TYPE % ENTERED_CR;
I_ACCOUNTED_DR GL_INTERFACE. TYPE % ACCOUNTED_DR;
I_ACCOUNTED_CR GL_INTERFACE. TYPE % ACCOUNTED_CR;
I_TRANSACTION_DATE GL_INTERFACE. TRANSACTION_DATE % TYPE;
I_REFERENCE1 GL_INTERFACE. REFERENCE1% TYPE;
I_REFERENCE2 GL_INTERFACE. REFERENCE2% TYPE;
I_REFERENCE3 GL_INTERFACE. REFERENCE3% TYPE;
I_REFERENCE4 GL_INTERFACE. REFERENCE4% TYPE;
I_REFERENCE5 GL_INTERFACE. REFERENCE5% TYPE;
I_REFERENCE10 GL_INTERFACE. REFERENCE10% TYPE;
I_GROUP_ID GL_INTERFACE. GROUP_ID % TYPE;
BEGIN
Vfile: = UTL_FILE. FOPEN ('CAPEX_ENVIO', 'comas.csv', 'R');
loop
UTL_FILE. GET_LINE(Vfile,Cadena,32767);
dato1: = substr (cadena, instr(cadena, identificador,1,1)-1, instr(cadena, identificador,1,1)-1);
dato2: = substr (cadena, instr (cadena, identifier, 1, 1) + 1, instr(cadena, identificador,3,1)-3);
dbms_output.put_line (dato1);
dbms_output.put_line (dato2);
-The evidence
-dbms_output.put_line (cadena);
-dbms_output.put_line (substr (dato, 3, instr(dato, identificador,1,1)-1));
-dbms_output.put_line (substr (dato, instr (dato, identifier, 1, 2) + 1, instr(dato, identificador,1,1)-1));
-dbms_output.put_line (substr (cadena, 1, length (cadena)-1));
end loop;
UTL_FILE. FCLOSE (Vfile);
-----------------------------------------------------------------------------------EXCEPTIONS------------------------------------------------------------------------------------------------------------------------------------------------------------
EXCEPTION
When no_data_found then
dbms_output.put_line ('Todo Correcto');
When utl_file.invalid_path then
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20060,'RUTA DEL ARCHIVO NULLIFIED: (');)
WHEN UTL_FILE. INVALID_OPERATION THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR ('-20061,'EL ARCHIVO NO PUDO SER ABIERTO ");
WHEN UTL_FILE. INVALID_FILEHANDLE THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20062, 'INVALIDO MANAGER');
WHEN UTL_FILE. WRITE_ERROR THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20063, 'ESCRITURA ERROR');
WHEN UTL_FILE. INVALID_MODE THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20064, 'MODO INVALIDO');
WHEN UTL_FILE. INTERNAL_ERROR THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20065, 'ERROR INTERNO');
WHEN UTL_FILE. READ_ERROR THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20066, 'LECTURA ERORR');
WHEN UTL_FILE. FILE_OPEN THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR ('-20067,'EL ARCHIVO ARE ESTA ABIERTO ");
WHEN UTL_FILE. THEN ACCESS_DENIED
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20068, 'REFUSED ACCESS');
WHEN UTL_FILE. DELETE_FAILED THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20069, 'OPERACIÓN BORRADO FALLO');
WHEN UTL_FILE. RENAME_FAILED THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20070, 'OPERATION SOBREESCRITURA FALLO');
END;

Hello

Try something like this:

POS1: = INSTR (cadena, idntificador, 1, 1);
POS2: = INSTR (cadena, idntificador, 1, 2);

ID: = SUBSTR (cadena, 1, pos1 - 1);
description1: = SUBSTR (cadena, pos1 + 1, (pos2 - pos1)-1);
Description2: = SUBSTR (cadena, pos2 + 1);

where pos1 and pos2 are numbers.

Rather than use UTL_FILE, consider creating an external table. You won't have to write any PL/SQL, and this means that you won't be tempted to write a bad article of EXCEPTION.

How to load an XML file and save it as a file fm

Hi Experts,
I have a bunch of XML files in a folder. I want to make is that I want iteratively, load the xml using a StructuredApplication and save it as a file FM. I was able to sucessfully load the XML file, but I'm having trouble to save a file of FM.
Here is the code I wrote so far:
If (sourceFolder! = null) {/ / If a valid file is selected}
files = new Array();
fileType = "*.xml";
files = sourceFolder.getFiles (fileType); Download all the files that match the pattern
If (files.length > 0) {/ / get the destination to save the files}
destFolder = Folder.selectDialog ('Select the folder where you want to save the converted XML files.', ' ~');
for (var i = 0; i < files.length; i ++) {}
Set the options to open the XML file.
var openParams = GetOpenDefaultParams();
var j = GetPropIndex (openParams, Constants.FS_OpenAsType);
. propVal.ival openParams [j] = Constants.FV_TYPE_XML;
j = GetPropIndex (openParams, Constants.FS_StructuredOpenApplication);
. propVal.sval openParams [j] = "XML Snpsbook";
j = GetPropIndex (openParams, Constants.FS_FileIsOldVersion);
. propVal.ival openParams [j] = Constants.FV_DoOK;
j = GetPropIndex (openParams, Constants.FS_FontNotFoundInDoc);
. propVal.ival openParams [j] = Constants.FV_DoOK;
j = GetPropIndex (openParams, Constants.FS_FileIsInUse);
. propVal.ival openParams [j] = Constants.FV_DoCancel;
j = GetPropIndex (openParams, Constants.FS_AlertUserAboutFailure);
. propVal.ival openParams [j] = Constants.FV_DoCancel;
var returnParams = new PropVals();
I'M NOT ABLE TO GET THIS LINE TO RUN. sourceDoc RETURNS a REFERENCE of OBJECT INVALID.
sourceDoc = Open (files [i] .name, openParams, returnParams); Returns the document object
Alert (SourceDoc.Name);
Function to save. XML file. Extension of the FM
var saveParams = GetSaveDefaultParams();
var returnParamsp = new PropVals();
Change the extension .xml FM
var k = GetPropIndex (saveParams, Constants.FS_FileType);
saveParams [k].propVal.ival = Constants.FV_SaveFmtBinary;
saveAsName = sourceDoc.name.replace (/ \.) [ ^\.\\]+$/,".fm");
var saveInFile = record (saveAsName, saveParams, returnParamsp); Save as file FM
saveInFile = new file (destFolder + ' / ' + targetFile);
saveInFile.close (); Close file
}
Alert ("the files are saved in the FM to ' + destFolder");
} else {}
Alert ('no matching files found!');
}
}

Hi reda,.

You are very close, but there are a few critical flaws in your code that will prevent the proper functioning:

-Your paths in string literals must have sequences to escape the backslashes. A backslash character is treated as an adverb in an escape sequence, so those need to be escaped themselves. For example: "C:\\Users\\rajrev\\file.xml."

-Your OpenXMLFile () function does not return anything, then the original DocumentSource variable never gets made.

-It is better to use the ObjectValid() method to test a valid object of FM.

-I am not an expert of regular expression, but I can't understand the logic in your replace() method, to create the new path of the file. In addition, the property "name" of the fileObject is invalid, it must be 'name '. I think that there are simpler ways to do.

-Your call to the Save() method is incorrect. It should be fileObject.Save (saveAsName, saveParams, returnParamsp).

All that being said, here is a quick review, without comment, that works for me:
```
var sourceDoc = openXmlFile("C:\\Users\\rajrev\\file.xml","XML snpsbook");
if (sourceDoc.ObjectValid()) {

    var path = sourceDoc.Name;
    var filename = path.substring((path.lastIndexOf("\\") + 1), path.length);
    filename = filename.replace(".xml", ".fm");

    path = path.substring(0, (path.lastIndexOf("\\") + 1));
    path = path + "transformed_files\\" + filename;

    //path testing
    //alert(path);

    saveToFm(sourceDoc, path);
    sourceDoc.Close(0);
}

// Function to open and XML file
function openXmlFile(filePath, structApp) {
    var openParams = GetOpenDefaultParams();
    var i = GetPropIndex(openParams, Constants.FS_OpenAsType);
    openParams[i].propVal.ival = Constants.FV_TYPE_XML;
    i = GetPropIndex(openParams, Constants.FS_StructuredOpenApplication);
    openParams[i].propVal.sval = structApp;
    var  returnParams = new PropVals();
    var doc = Open(filePath, openParams, returnParams);
    return doc;
}

//Function to save the opened XML as an FM file
function saveToFm(fileObject, savePath) {
    var saveParams = GetSaveDefaultParams();
    var i = GetPropIndex(saveParams, Constants.FS_FileType);
    saveParams[i].propVal.ival = Constants.FV_SaveFmtBinary;
    var saveAsName = savePath;
    var returnParamsp = new PropVals();
    fileObject.Save(saveAsName, saveParams, returnParamsp);
}
```

Load the CSV file

I use Apex 3.2 and construction of a facility charge of csv file.
I received a lot of help on this post

Re: Validate CSV File

I'm now able to load the data into my custom table.
Before I do that I want to update the collection first, using this option if statement

IF c001 IS NULL THEN
            c006    := 'APXIMP';
            c007    := c007 || 'Storekey is missing!';
          END IF;

          IF c002 IS NULL THEN
            c006    := 'APXIMP';
            c007    := c007 || 'Plan Delivery Moment is missing!';
          END IF;

          IF c003 IS NULL THEN
            c006    := 'APXIMP';
            c007    := c007 || 'WRIN Base is missing!';
          END IF;

          IF c004 IS NULL THEN
            c006    := 'APXIMP';
            c007    := c007 || 'WRIN Suffix is missing!';
          END IF;

          IF c005 IS NULL THEN
            c006    := 'APXIMP';
            c007    := c007 || 'Order Qty. is missing!';
          END IF;

          IF c005 IS NOT NULL THEN
            IF SIGN(vt_record(5))=-1 THEN
              c006    := 'APXIMP';
              c007    := c007 || 'Order Qty. must be a positive integer value!';
            END IF;
            IF MOD(c005,FLOOR(c005)) <> 0 THEN
              c006    := 'APXIMP';
              c007    := c007 || 'Order Qty. must be a positive integer value!';
            END IF;
          END IF;
        EXCEPTION
          WHEN others THEN
            c006    := 'APXIMP';
            c007    := c007 || 'Order Qty. must be a positive integer value!';

I am new to the collections, so if someone could show me an example or point me in the right direction, as there seems to be several types of update of collection procedures.

See you soon

Gus

Hello

You talk about the package but written the anonymous block syntax. I did understand what you're trying to do.

Assuming that it is a procedure of your code should look like

CREATE OR REPLACE PROCEDURE UPDATE_COLL (
  P_collection_name IN VARCHAR2  -- parameter passed when calling from Apex Process
) AS

begin

for x in (select seq_id, c001, c002, c003, c004, c005, c006, c007
         from apex_collections
        where collection_name = p_ collection_name )
LOOP

     IF x.c001 IS NULL THEN
      apex_collection.update_member_attribute (
         p_collection_name=> p_collection_name,
         p_seq=> x.seq_id,
         p_attr_number =>6,
         p_attr_value=> 'APXIMP'
        );
       apex_collection.update_member_attribute (
          p_collection_name=> p_collection_name,
          p_seq=> x.seq_id,
         p_attr_number =>7,
         p_attr_value=> x.c007 || 'Storekey is missing!'
      );
     END IF;

    IF x.c002 IS NULL THEN
      apex_collection.update_member_attribute (
         p_collection_name=> p_collection_name,
         p_seq=> x.seq_id,
         p_attr_number =>6,
         p_attr_value=> 'APXIMP'
        );
       apex_collection.update_member_attribute (
          p_collection_name=> p_collection_name,
          p_seq=> x.seq_id,
         p_attr_number =>7,
         p_attr_value=> x.c007 ||  'Plan Delivery Moment is missing!'
      );
     END IF;

    IF x.c003 IS NULL THEN
      apex_collection.update_member_attribute (
         p_collection_name=> p_collection_name,
         p_seq=> x.seq_id,
         p_attr_number =>6,
         p_attr_value=> 'APXIMP'
        );
       apex_collection.update_member_attribute (
          p_collection_name=> p_collection_name,
          p_seq=> x.seq_id,
         p_attr_number =>7,
         p_attr_value=> x.c007 ||   'WRIN Base is missing!'
      );
    END IF;

    IF x.c004 IS NULL THEN
      apex_collection.update_member_attribute (
         p_collection_name=> p_collection_name,
         p_seq=> x.seq_id,
         p_attr_number =>6,
         p_attr_value=> 'APXIMP'
        );
       apex_collection.update_member_attribute (
          p_collection_name=> p_collection_name,
          p_seq=> x.seq_id,
         p_attr_number =>7,
         p_attr_value=> x.c007 ||  'WRIN Suffix is missing!'
      );
   END IF;

  IF x.c005 IS NULL THEN
      apex_collection.update_member_attribute (
         p_collection_name=> p_collection_name,
         p_seq=> x.seq_id,
         p_attr_number =>6,
         p_attr_value=> 'APXIMP'
        );
      apex_collection.update_member_attribute (
          p_collection_name=> p_collection_name,
          p_seq=> x.seq_id,
         p_attr_number =>7,
         p_attr_value=> x.c007 || 'Order Qty. is missing!'
      );
  END IF;

  IF x.c005 IS NOT NULL THEN
      IF SIGN(c005)=-1 THEN
      apex_collection.update_member_attribute (
         p_collection_name=> p_collection_name,
         p_seq=> x.seq_id,
         p_attr_number =>6,
         p_attr_value=> 'APXIMP'
        );
      apex_collection.update_member_attribute (
          p_collection_name=> p_collection_name,
          p_seq=> x.seq_id,
         p_attr_number =>7,
         p_attr_value=> x.c007 || 'Order Qty. must be a positive integer value!'
      );
     END IF;
     IF MOD(c005,FLOOR(c005))  0 THEN
      apex_collection.update_member_attribute (
         p_collection_name=> p_collection_name,
         p_seq=> x.seq_id,
         p_attr_number =>6,
         p_attr_value=> 'APXIMP'
        );
      apex_collection.update_member_attribute (
          p_collection_name=> p_collection_name,
          p_seq=> x.seq_id,
         p_attr_number =>7,
         p_attr_value=> x.c007 ||'Order Qty. must be a positive integer value!'
      );
    END IF;
  END IF;
END LOOP;
 EXCEPTION
          WHEN others THEN
      apex_collection.update_member_attribute (
         p_collection_name=> p_collection_name,
         p_seq=> x.seq_id,
         p_attr_number =>6,
         p_attr_value=> 'APXIMP'
        );
      apex_collection.update_member_attribute (
          p_collection_name=> p_collection_name,
          p_seq=> x.seq_id,
         p_attr_number =>7,
         p_attr_value=> x.c007 || 'Order Qty. must be a positive integer value!'
      );
end;

Import CSV file and the conversion of an array

Hi all
I'm working on a site that is to import a CSV (comma separated values) published via actionscript 3.0 URLloader(). Now I just try to get actionscript to successfully enter the data imported from the CSV file as a table, then the CSV file has 1 single cell that contains "athleticMaroon, charcoal, colonialBlue, kellyGreen, fullColor".
Here is the code I use:
create table
var shirtLiveIntense_btn_Colors:Array = new Array();
run the import from CSV data
URLLoaderCSV();
shirtLiveIntense_btn.addEventListener (MouseEvent.CLICK, selectingLogo);
function selectingLogo(e:MouseEvent):void {}
trace ("current logo');
var colorButtons:Array = this [e.currentTarget.name + "_Colors"];
for (var i: uint = 0; i < colorButtons.length; i ++) {}
.Ivar colorButtons [i] = i;
colorButtons [i] .addEventListener (MouseEvent.CLICK, shirtColorOption);
}
}
CSV data import function
function URLLoaderCSV() {}
var loader: URLLoader = new URLLoader();
configureListeners (loader);
var request: URLRequest = new URLRequest ("https://docs.google.com/spreadsheet/pub?hl=en_US & hl = en_US & key = 0AlJnOKOffTSxdFk0RVlEUTVHeF9 DMHZfZ0JzSkJjZFE & single = true & gid = 1 & output = csv");
try {}
Loader.Load (request);
} catch (error: Error) {}
trace ("unable to load requested document.");
}
}
function configureListeners(dispatcher:IEventDispatcher):void {}
dispatcher.addEventListener (Event.COMPLETE, completeHandler);
dispatcher.addEventListener (Event.OPEN, openHandler);
dispatcher.addEventListener (ProgressEvent.PROGRESS, progressHandler);
dispatcher.addEventListener (SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
dispatcher.addEventListener (HTTPStatusEvent.HTTP_STATUS, httpStatusHandler);
dispatcher.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);
}
function completeHandler(event:Event):void {}
var loader: URLLoader = URLLoader (event.target);
trace ("completeHandler:" + loader.data);
shirtLiveIntense_btn_Colors.push (loader.data);
}
function openHandler(event:Event):void {}
trace ("openHandler:" + event);
}
function progressHandler(event:ProgressEvent):void {}
trace ("progressHandler loaded:" + event.bytesLoaded + "total:" + event.bytesTotal);
}
function securityErrorHandler(event:SecurityErrorEvent):void {}
trace ("securityErrorHandler:" + event);
}
function httpStatusHandler(event:HTTPStatusEvent):void {}
trace ("httpStatusHandler:" + event);
}
function ioErrorHandler(event:IOErrorEvent):void {}
trace ("ioErrorHandler:" + event);
}
Here is the result:
openHandler: [event type = "open" bubbles = false cancelable = false eventPhase = 2]
progressHandler loaded: 57 total: 0
httpStatusHandler: [HTTPStatusEvent type = "httpStatus" bubbles = false cancelable = false eventPhase = 2 status = 200]
completeHandler: athleticMaroon, colonialBlue, kellyGreen, charcoal, fullColor
chosen logo
ReferenceError: Error #1056: cannot create ivar String property.
at main_fla::MainTimeline/selectingLogo()
Review of results of release, I see it's clearly to load the data from the CSV file correctly, but what I think it does is important data as a single string, aka 'athleticMaroon, charcoal, colonialBlue, kellyGreen, fullColor' and push for shirtLiveIntense_btn_Colors:Array = new Array(). But, as I see the error selectingLogo(e:MouseEvent) service cannot treat the table because it contains a string of.
If I switch to shirtLiveIntense_btn_Colors.push (loader.data); with shirtLiveIntense_btn_Colors.push (charcoal, colonialBlue, kellyGreen, athleticMaroon, fullColor); everything works like a charm, but I need the table to assign dynamic in the CSV file data
Can anyone help to get imported CSV data to strings pushed a table accessible?
Thank you!

It is an error caused by:

var colorButtons:Array = this [e.currentTarget.name + "_Colors"];

for (var i: uint = 0; i

.Ivar colorButtons [i] = i;

colorButtons [i] .addEventListener (MouseEvent.CLICK, shirtColorOption);

}

your table is an array of strings. If you try to force these strings into objects on the timeline that contains your code, use array notation:

var colorButtons:Array = this [e.currentTarget.name + "_Colors"];

for (var i: uint = 0; i

This .ivar [colorButtons [i]] = i;

This [colorButtons [i]] .addEventListener (MouseEvent.CLICK, shirtColorOption);

}

1 reading coulumn .csv file and display its PSD

Hello

I have a .csv file that corresponds to the readings (all the 1 second) voltage.

I am able to read using LabView, I use Read spreadsheet take his exit (all lines) and then select the first column only, pass it to build a wave form and then, view the power spectral density.

Unfortunately, nothing is displayed.

Any ideas? The file only contains double numbers (for example 0.01234 etc.). There are 50 thousand lines.

Thanks in advance.

Hello

I solved the problem in unbundeling the signal out of the PSD, then take the subsignal of greatness and him alone, then wads of scale together.

Load a CSV file and access to variables

Similar Questions

Maybe you are looking for