load a different image to the scene

Similar Questions

• When I go to file and download a picture that everything is fine, but when I go to the file again and try to load a second image makes the former disappear. Why?

  When I go to file and download a picture that everything is fine, but when I go to the file again and try to load a second image makes the former disappear. Why?

  From your description, I suspect that you have selected Open Documents as tabs in the Interface preferences section.

  Your first image doesn't go away, but is in tabs at the top of the images.

  If you prefer to see the images separately, uncheck the box of Documents open as tabs, as shown below

  

• How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene?

  How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene? There are buttons for other scenes in these images. The below works well until I got to the last frame of the scene, then he goes to the next scene and plays. How can I make one loop continuously.

  Stop();

  var: timer = new Timer (20000,0); / / <--

  timer.addEventListener (TimerEvent.TIMER, timerHandler);

  Timer.Start ();

  function timerHandler(event:TimerEvent):void {}

  this.nextFrame ();

  or if you want to jump for example 5 executives

  this.gotoAndStop(this.currentFrame+5);

  }

  Thanks for any help.

  If you want to stop your timer, use the stop() method:

  Timer.Stop ();

  PS when you use the adobe forums, please check the useful/correct, if there is.

• Permutation of loaded xml of Images for the elements in the scene?

  Hello!

  I have a quick question on xml loaded images.

  You can add/attach/swap images for the elements in your scene?

  I would like to manually animate a movieclip using the interpolation of keyframes and the movement. For example, to have a movieclip FLY! on the screen! lol but I want it to be one that has been dynamically loaded image.

  I can't find how to replace an image on a movieclip from a dynamically loaded image.
  Is it still possible?

  Thanks heaps for your time that you guys!

  If the original image is the only object in the movieclip, you can use removeChildAt (0) to get rid of it and use addChild (your_new_image) to replace it.

• How to change the gesture example application to load a different image after initial load

  The sample application 'Gesture' is a good start for me, since I want to load and display a picture full screen.

  However, my application needs to change the image that is displayed thereafter.

  I managed to load the new JPEG image via:

  ...

  io_stream_t * memory_stream = io_open (IO_MEM, IO_READ, num_jpeg_bytes, jpeg_bytes);

  RC = img_load (ilib, memory_stream, & legends, &img);)

  ...

  ... but the new image is not displayed on the screen.  I guess that's because the decode_setup function that is used to load the image when the IPL does not have to then change the image, but I don't know how it should be changed.

  I read:

  https://bdsc.webapps.BlackBerry.com/native/reference/com.QNX.doc.libimg.lib_ref/com.QNX.doc.libimg.l...

  ... but it does not tell me something I already know.

  I guess the question is this: If you load an image into a structure img_t, how can I take this img_t and update the screen to display the image full screen?

  Thank you!

  Daniel

  Hi Daniel,.

  The legend of decode_setup provided should load successfully all significant images in memory buffer rendering. However that alone does not display the image on the screen. You must call screen_post_window() after your call to img_load to make your changes in the visible rendering buffer.

  See:

  https://bdsc.webapps.BlackBerry.com/native/reference/com.QNX.doc.screen.lib_ref/topic/rscreen_post_w...

  For more information, or the main() function of the sample of actions for an example.

  Kind regards

  Jeff

• How can I change the logo in the Firefox brand to a different image on the topic: home page using CSS?

  I would like to insert my own image where the Firefox brand newspaper appears on the topic: homepage.
  I already use a custom CSS and cannot replace the content of the element "brandLogo". Any experience out there?

  #brandLogo {
    width: 0px !important;
    padding-left: 154px !important;
    background: url("file:///C:/Path%20to%20image/customlogo.png") !important;
  }

  • The fill value must be equal to the width of the new image.
  • If you use the Stylish extension, you can embed the image in the style by clicking on the Insert button, and then selecting data URI.

• How to open two different images at the same time to work on it together please?

  Please help, I am at a loss to open the two images at the same time to work together on them. can someone help please

  I suspect that, in this point of you familiar with the functionality of Photoshop, you may prefer the following:

  Choose Preferences > Interface > and uncheck open as tabs Documents

  Then, when you open two images they both will appear on the screen.

  At a later time, you may want to work with her alternate: the tabs option.

• Make a button in a movieClip takes you to a different image outside the movieClip? (AS2)

  I have a project, a clip that contains panoramic text and a button.

  Basically, the second image contains said film clip, the movieClip is panoramic of text, then the last image of the movieClip is a keyframe with a button inside. How can I do so by clicking on the 'next' button takes me to frame 3 of the project overall? Thank you!

  Assign the button an instance name (example uses 'btnName'), then in the timeline that it occupies, put the code so he can tell the main timeline to go to the next section...

  btnName.onRelease = function() {}

  _root.nextFrame ();  or _root.gotoAndStop (3);

  }

  If "_root" does not try to substitute "_level0."

• shows different images on the same chassis with half and full resolution

  In the same framework, don't know why I'm using half resolution or high resolution, the same show different picture frame

  sometimes half resolution shows the picture right on some frames, but sometimes not, and vice versa.

  for example.

  at 02:00 I put picture called "pic5" on the chassis, but full resolution shows the photo of "pic6", and although I use half of the resolution to see a preview, it shows "pic5.

  but at 03:00 I put picture called "pic4" on the chassis, full resolution shows the 'pic4' photo, but half resolution to preview, it shows "pic5.

  and while I'm making, it uses the result of full resolution

  I had used Edition > purge > all memory and hidden, to address this problem sometimes, but not everytime.

  How do I do with it?

  I had used edit > purge > all memory and hidden, to address this problem sometimes, but not everytime.

  How do I do with it?

  Well Yes, it is a cache problem. You should try to remove all your cache completely-> memory and disk cache preferences

  

• Disk partition makes it active so that I can boot from to load a different version of the OS

  Hello: first time using this forum. Here's my problem. I have a custom-made computer who use to allow me to duel boot into the operating system of my choice. I have recently had problems at the start where the start cycle automatically sends me to my windows 7 OS. He used to give me a choice, but is no longer made.  I've entered my Bios and set the boot drive to correct an and are even went to management in respect of the management and the computer discs has tried to set the active boot disk partition but it will not even give me a choice on which OS start at startup. It just keeps going to Windows 7. Here's a grab of the scree of my disk management.

  

  I know that that said 'no-limit' but this is my other OS. I need to somehow make it active so when starting it will give me the return option on which operating system to start.  Can someone help me on this?

  Free mini tool allows you to configure the space / partition active fairly easy

  http://www.partitionwizard.com/free-partition-manager.html

  The partition should probably show with Fat32.

  You might see if this bad update installed

  https://support.Microsoft.com/en-us/KB/3133977

• Loading only last image

  This code is the xml loading properly, filling the mainClipArray correctly, but adding only the last image of the scene.

  In my view, that he does not expect completeClipLoad() finish.  I tried to delete: nowhere from the function to see if in the meantime a return would, but not luck.

  Any ideas?

  CODE:

  var myXML:XML;
  var xmlLoader:URLLoader = new URLLoader();
  var mainClipArray:Array = [];
  var count: int = 0;
  var myLoader:Loader = new Loader();

  xmlLoader.load (new URLRequest ("portfolio.xml"));

  xmlLoader.addEventListener (Event.COMPLETE, completeXMLLoad);

  function completeXMLLoad(e:Event):void {}
  myXML = XML (e.target.data);
  var len:int = myXML.portfolio.unit.length ();
  for (var i: int = 0; i < len; i ++) {}
  counter = i;
  mainClipArray [i] = new pane();
  
  Load the small image
  var smallfilename = myXML.portfolio.unit [i].small.filename;
  
  myLoader.load (new URLRequest (smallfilename));
  myLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, completeClipLoad);
  
  mainClipArray [i] .x = i * 15;
  
  addChild (mainClipArray [i]);
  }
  }

  function completeClipLoad(e:Event):void {}
  trace ("inside");
  mainClipArray [counter] .addChild (myLoader);
  trace ("additional child");
  }

  Delay the progression will not help you if you still have a single charger.  I would say that you can move the var myLoader:Loader = new Loader(); line inside the loop so that you have a new instance of charger for each occurrence of loading, but then, you also have to set the completeClipLoad feature to use the event target (e.target) instead of 'telephone '.  But this still wouldn't resolve questions completely because you have this counter variable that will work as fast as the loop for, with the finish likely to loop before the first element is responsible... and since your completeClipLoad also made use of this variable, you will end up with only the last used pane object.

  If you want to control the load order and keep the code in one place (the other suggestions offered above the code inside the component could also be a viable approach), a better strategy is to use a loop set rather than a loop for example, where a single load step at a time and the completion of a loading triggers the next to begin.  Something like (it's just a hierarchical form)...

  counter = 0;

  imgArray;

  function completeXMLLoad(e:Event):void {}
  ... / / treat all the XML in the imgAray

  loadSmallImage(); Start by just loading the first image

  }

  function loadSmallImage() {}

  creating instance of charger

  assign the load complete listener

  load imgArray [meter]

  }

  function loadComplete(e:Event) {}

  process the image in a new pane

  incrementing counter

  If the counter is < imgarray.length="" -=""> loadSmallImage().

  }

• My desktop image has another image in the Center, I can't delete, XP Home Edition

  Image of the desktop has a different image in the Center, I can't delete, XP Home Edition

  Hello

  1 have had modifications made to your computer before the problem occurred?

  2 are you facing this problem that when you set a particular background or with any other images?

  3 is the image pre-installed Windows XP, or you have downloaded the image of a place?

  4. what happens when you try to change the desktop wallpaper. you get the error message?

  I suggest to follow the article below troubleshooting steps and check to see if that fixes the problem on your computer.

  To change your wallpaper

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_desktop_background.mspx?mfr=true

  I hope this information helps. Please get back to us if you have any other questions on this subject.

• How can I add (gather) two different images into a single image?

  Well, I'm creating a HTML element / CSS Web site. I have two logos that I need to add to the header areas of the Web page. I thought that creating a chart would contribute to this question. I want to be able to add two different images (logos) into a finished product. However, I am having some difficult understand how to combine two different images on the same workspace (tab).  The images would be out there with text in the middle of the space. I would use the 2015 Photoshop, does anyone have and ideas?

  If it was me I open one of the images then go to Image--> the canvas size.  Then expand TI (relative check) of several (12) inches in width and height (choose to anchor the part you want to stay where he is.)

  Open another image and drag it in the first.  Or select all and then copy / paste If you wish, you can you should now have two images in the same file/tab.  Everyone should be on different layers.  Use the move tool to position them how you want.

  Finally go to Image > Trim and leave the default values.  He must cut off all the excess.  Save in any format you want.

  I hope this helps.

• Need for a 'real' for Muse jQuery widget that can handle different images:

  relaxation: a small thumbnail image (1:1) and the 'real' image: more grand (course) and size/shape different example 2:3.

  Where can I get this widget?

  I've tried different widgets musegrid Te - but they can't manage two different image as the 'classic' lokesh/lightbox2 · light therapy device GitHub...

  Thanks a lot for your help!

  Bernhard

  You can get close to this effect by using the built-in slideshow widget.

  Set the options for full screen and Lightbox mode.

  Temporarily make the thumbnails big and square.

  Select all the thumbnails, and then select object > adjustment > fit content proportionally.

  Limitations of this approach include:

  You can caress or round the corners of the thumbnails (assuming that they have mixed proportions) since the stroke or rounded will appear on the square frame thumbnail is able to breast, rather than the image itself.

  You cannot crop the thumbnail contrary to the image of heroes. Again because the frame is big and square, and the image is fit inside (in order to activate thumbnails with different reports l / h).

  I'm not aware of any Muse of third party widget which would get as close to the exact effect you want to achieve.

• Green Spry menu bar. -problem adding list-image in the menu bar container

  Can anyone help - after searching the Web failure

  I want to add a single image (such as bullet points) in front of the text in a menu bar.

  And to make it a bit more 'difficult': different images for the menu outermost bars and identical images in the submenu bar - like this:

  [pic1] CLUBS

  [pic2] XXXX

  [pic2] AAAA

  [pic3] RESULTS

  [pic4] FIXTURES

  Thanks in advance for the solutions
  (perhaps also make the Spry menu?)

  Georg

  • http://www.croquet.at/img/navi-left/hoop_blue.gif "> Clubs"

    • http://www.croquet.at/img/center/bullet_ball.gif"> Salzburg.
    • http://www.croquet.at/img/center/bullet_ball.gif"> Wien.
    • http://www.croquet.at/img/center/bullet_ball.gif"> Wolkersdorf.

    Nancy O.