Loading only last image

Similar Questions

• Loading before the images (preloader question) images

  I have a .swf which is 83%, images and weighs about 4 MB.

  This large size, I decided I'd do a preloader, however, framework of the preloader will load only after images and other resources are loaded.

  Basically, the preloader will appear after 83% of the .swf is loaded, who leaves the white screen for a moment and then only display the preloader.

  In even simpler terms, I want to set the priority of loading something (a resource? a scene? a frame?), or only a single image to load, then let that govern loading the rest.

  Please report if you did not understand what I mean.

  Yet once, for each symbol (in your library) related to export, uncheck the export in frame 1.  then test.

• a table of images only the last image shows the index

  Hello world

  I try to index a table of images and all, but the last item gives me the error: "not an image."

  Here is a picture of the vi. The first loop load images and stores them in an indexed auto tunnel. Each diagnosis that I fell on this loop showed that all is well. The second loop must display the image stored in the tunnel sequence indexed auto, but it does not work. Instead, I got the error message that the 0 to n - 1 elements are not images, and only the last image is displayed.

  

  What I am doing wrong?

  Thanks for your help.

  and vi:

  Hello

  This VI has worked well for me with a contribution of 5 bmp files. You can check your input files?

• Loading GIF animations only first image

  GIF animations appear as still images. Animation load only after a right click and will image info.

  You have the image.animation_mode set to none as you can see in the list of system details.

  • image.animation_mode: no

  You need on the other (normal or once)

• Why when I backup after selection keep only last system only the old image image is maintained?

  Why when I backup after selection keep only last system only the old image image is maintained?

  Hello

  ·         What operating system is installed on the computer?

  ·         The computer is connected to the domain network?

  If you are using Windows 7 then you can try the steps mentioned below and check to see if they help.

  When you schedule a backup on your computer, all the backup files would be automatically and replaces the old backup data.

  You can follow these steps below to remove the system image backup.

  1. open the control panel (all items view).
  2. click on the backup and restore icon.
  3. as the backup, click on the link manage space.
  4. to select a backup location-
  NOTE: This is for which the backup of files the user is located in. If the backup location is already displayed, go to step 5.
  (A) under the backup location, click Browse.
  (B) go to the backup location and select it.
  (C) continue to step 5.
  5. under backup of user files, click View backups button.
  6. Select the period of backup that you want to remove, and then click Remove.

  See also:

  Learn more about the system image backup

  http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx

  Should what backup settings I use to maximize my disk space?

  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

• Load swf to the last image

  Hello

  I have several files SWF is meant to be read in order (like a book). I can load the previous swf file, but I need to go to the last image. Is this possible with the code that I have?

  lastPage2.addEventListener (MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_1);

  Import fl.display.ProLoader;

  var fl_ProLoader_1: ProLoader;

  var fl_ToLoad_1:Boolean = true;

  function fl_ClickToLoadUnloadSWF_1(event:MouseEvent):void

  {

  If (fl_ToLoad_1)

  {

  fl_ProLoader_1 = new ProLoader();

  fl_ProLoader_1.load (new URLRequest ("CEAS_I_1_16.swf"));

  addChild (fl_ProLoader_1);

  }

  on the other

  {

  fl_ProLoader_1.Unload ();

  removeChild (fl_ProLoader_1);

  fl_ProLoader_1 = null;

  }

  fl_ToLoad_3 =! fl_ToLoad_1;

  }

  It doesn't work at all, but I could find another code that you suggested on another thread: go to a specific external swf image

  It worked!

  var loadmod2:Loader;

  lastSection.addEventListener (MouseEvent.CLICK, loadlast);

  function loadlast(e:MouseEvent):void

  {

  {if(!loadmod2)}

  loadmod2 = new Loader();

  loadmod2.contentLoaderInfo.addEventListener (Event.Complete, loadCompleteF);

  }

  loadmod2. Load (new URLRequest ("CEAS_I_1_16.swf"));

  }

  function loadCompleteF(e:Event):void {}

  addChild (loadmod2);

  MovieClip (loadmod2.content), .gotoAndPlay (33);

  }

• My site, created using Dreamweaver cs6 shows only partial images. He worked until a few days ago when I updated Java and Firefox.

  My site, created using Dreamweaver cs6 shows only partial images.
  He worked until a few days ago when I updated Java and Firefox.
  The URL is j - f - a.com.au

  The images are not entirely loading or do you have other problems?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  I noticed that some images show at the right end of the window and have set width: auto (right: 0px; width: auto) set the width according to the dimensions of the image (i.e. maintain proportions) and others fill the width full page.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• After closing a browser window and if I open a new browser window, the browser does not open by my home page in tools/options/commissioning, it loads the last page

  recently, at the opening of a new browser, all is using and closed my last session opens

  several widows will open and no matter what the tabs were opened by respective windows will open and not through tools/options/start/homepage

  It never happened until recently and nothing else seems to have changed or new programs etc has been loaded or changed

  You can remove the user.js, as it shouldn't be there unless you have created the file yourself.

  If you set the pref in this file then you'll lose open tabs if you need to restart Firefox after installing a new extension, as this is the main reason for the use of this preference.
  So remove the user.js file or at least this line if you want to continue to be reset possible other present prefs in the file each time you start Firefox.

  This file is read every time you start Firefox, so changes made to the Pref set via this file only last for the current session.

• How long does take to load know last good configuration?

  Waited about an hour. How long does take to load know last good configuration?

  It should not take more than he does start normally.  The Configuration of the property last known (LKGC) is a copy of the control set that was used last successfully start the machine, the boot is only considered successful once you log on to the computer.  When you connect successfully on the control set used to start the machine is copied on a numbered control (HKEY_LOCAL_MACHINE\SYSTEM\ControlSetnnn) the value and the value for LastKnownGood in the HKEY_LOCAL_MACHINE\SYSTEM\Select is updated to represent the LKGC.  Changes that you make after you log on is not registered in the LKGC.

  In general the LKGC is useful when installing hardware or drivers or when incorrectly configured services prevent Windows to start.  On an operational computer the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet represents this set of materials and services.  It may be useful:

  Information on the last series of well-known control

  What are control sets? What is CurrentControlSet?

  John

• Pavilion 17/F153NS-EN: the batery of my new laptop only lasts 2 hours

  Hello

  A few weeks ago, I bought a HP Pavilion 17-F153NS IN. I loaded 5 times since I got it but the batery only lasts 2 hours. A new mobile batery shouldn't last longer? I also have an older netbook lasts for about 5...

  Thanks for your help!

  17 inch, AMD processor screen... 2 hours is just. This tutorial can help. The big thing is to turn down the brightness of the screen. This old netbook has a screen 10 thumbs and a very low powered processor. Not really a fair comparison.

  http://support.HP.com/us-en/document/c01297640

• Lightroom CC freezes on loading the second image in the develop module

  I use Lightroom CC on Windows 10 (recently updated to Win7). When I start LR, I can only load an image in the develop module. When the attempt to load the second image, LR is just froze. I left on for an hour now.

  Here are the steps I've taken so far:

  • Restarted LR.
  • Restarted Windows
  • Uninstalled and reinstalled LR.
  • Run LR as administrator.

  None of these steps has made a difference.

  Manually disable the graphics processor in Lr

  1. Go to C:\Users\Username\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 6/CC Preferences.agprefs (Appdata is hidden folder)
  2. Right-click on the Preferences.agprefs from Lightroom 6 > open with Notepad
  3. Change the following line: useAutoBahn = true to the useAutoBahn next = false
  4. Save and close the file Lightroom 6 Preferences.agprefs
  5. Restart Lightroom CC/6.

  Related link: Adobe Photoshop Lightroom Help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  

  ~ Mohit

• Why the last image of the exported image sequence is sometimes black?

  I get sequences of images in Photoshop and then exporting them to a file mp4 video.  For some reason, Photoshop sometimes decides to put a black frame at the end of the video, no matter what I try settings.  Sometimes it leaves aside the black frame.  I can't understand why he did this.  If anyone knows how to get rid of this?  When I import the resulting sequences first, I need to change all the frames of black.  Not impossible to deal with, but it is kind of a pain.

  Adobe Photoshop Version: 2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532 x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: AMD CPU Family: 15, model: 10, Stepping: 0 with MMX, entire SSE, SSE, SSE2, SSE3 FP

  Physical processor count: 6

  Processor speed: 3200 MHz

  Built-in memory: 8191 MB

  Free memory: 4507 MB

  Memory available to Photoshop: 7154 MB

  Memory used by Photoshop: 70%

  Graphics card: NVIDIA GeForce GTX 470 (with the latest driver Version 347.88)

  Adobe Bridge 6.1.0.116 x 64

  Use, file-> open and checking the box 'Sequence of Image', I am loading a sequence of JPGs I've cropped in Photoshop (using a script to automate this process), and I specify 23.976 fps. I checked all the JPG files, and they are OK. I play the animation in Photoshop, and it looks good.  I then export the movie using the file-> export-> made video, I use Adobe Media Encoder, h.264 format, high quality, 1920 x 1080 (the original document size), 23.976 fps.  It automatically selects the zone selection to export work.  That seems correct.  In a sequence of images of N, it is said that it will export images 0 to N-1, which I think is OK if it indexes starting at 0 and not 1.  I tried to export (frames) checked, and the result is the same.  The last image is black.  I also tried to change the work area to remove the last image and the last frame of the rendered video is so dark, but the last image of the sequence, I opened is missing.  I checked the image sequence that was exported with the area of complete work (or frameworks) selected and all managers are there - with just a framework black, added at the end, which is certainly not in the work area.

  No error message.

  I checked the help, also I tried searching the forums, but I don't know what I'm doing wrong.

  The problem has been around on and off for a few years.  He had disappeared with CC, but now he's back, even though I'm not aware of what I'm doing differently.

• Is there a possibility to import ONLY RAW images via Organizer and let the jpeg on the camera?

  When I import the images from the camera (Olympus MDGS Em-1): can I import only RAW images in the Organizer?

  Hope for help I am not very savvy sorry English.

  TXS

  Alexandra

  Alexandra,

  The downloader of elements module does not provide an option to filter the files imported by their type (jpg or raw). You can filter only the videos photos. I'm agree it would be an asset!

  What you can do instead:

  -use your operating system (Explorer / finder) to import files to your computer via your card reader: you can order your files to import extension (jpg, CR2, NEF,...) and select the raw files. Then use the function "Import" elements to import from "Files and folders" (which "registers" files in the catalog).

  - Or you can use the download of standard element and remove JPEG files later. Not very elegant, but it works.

  - Or you can use the function "Import" elements and choose in "Files and folders" instead of card reader or the camera, then go to the card reader. The card reader is considered to be a separate drive. You can select only the raws in the import dialog box by setting the order of the files in the file (CR2, NEF...) instead of file name extension. You select the first item, then shift click the last one. Only the raws are selected. Now, pay attention to have the box 'Copy' the o files. Otherwise, the elements would consider your photos on a removable drive. The photo files will be copied to your computer in a special subfolder 'photo of removable drives.

• Last image of each sequence has Magenta Rectangle

  So on the last image in any order I do in the first, I get this:

  

  Is there a way to turn this off, or is it just a mistake? I only had this problem since update PP 2014.

  More photos by reference:

  

  the second to last image (above)

  

  Last image (above)

  It seems to repeat the last image and put this magenta rectangle on the side of her.

  Thank you!

  It's the new indicator of 'end of the sequence', it was black in the previous version. Please send a feature request to Adobe to get rid of him.

• AutoPlay and if stop at the last image does not not on android Tablet

  I'm trying to use folio Builder to make a portfolio for my work and post it on my Nexus 7 Andorid tablet.  The opening page is a video that should stop on the last image.  After reading many articles, it seems that only iOS is able to use these features, and it won't work on android.  Are there workarounds?

  In early February, we will have our new native Viewer available in large pre-release Android, and you will be able to compile a version using this new application that supports the stop on the last image. Until then, no, there is no work around.

  Neil