load the brush bought together, but preferences close lightroom! How should I do?

Similar Questions

• Photoshop cs5 crashes on launch when loading the brushes

  Photoshop cs5 crashes on launch when loading the brushes.  I have to do a hard reboot and reset the preferences.  In the last 2 days I had to do it 3 times.  I have the latest drivers.  Here's my hardware.  I'm also under lightroom.  I don't have this problem after I installed the latest updates on the adobe Web site. Does anyone have information on a fix for this problem thank you very much for your time.

  Nancy Cuppy

  

  I guessed it was a later part of the process and loading brushes was just the last thing as shown.

  Could you send me a copy of this file corrupt brushes?  I would like to know how he could cause the launch to hang.

  ccox at adobe dot com.

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Hello, I would like to install items 13 on a new computer that I go to.  I bought elements 13 and installed on my old computer. my serial number is &lt; deleted by the moderator &gt;.  Sorry, but I cannot determine how to

  Hello, I would like to install items 13 on a new computer that I go to.  I bought elements 13 and installed on my old computer. my serial number is < deleted by the moderator >.  Sorry, but I cannot determine how to do from your download page. Thanks a lot, my email address is < deleted by the moderator >

  Reference: http://www.adobe.com/downloads/other-downloads.html

  I hope this helps.

  Concerning

  Megha Rawat

• Hello! I changed my credit card, and I'm trying to change the number of the account, here, too, but does not appear, how can I do this?

  Hello! I changed my credit card, and I'm trying to change the number of the account, here, too, but does not appear, how can I do this? Please answer me as fast as you can!

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

• Hello. I received the wrong product and need a refund. How should I proceed?

  Hello. I received the wrong product and need a refund. How should I proceed?

  its been 10 days

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Hello, is it possible to use the creative cloud on a chromebook? And how should I "install"? Thank you!

  Hello, is it possible to use the creative cloud on a chromebook? And how should I "install"? Thank you!

  No.... Mac or Windows only

  Well well, with the exception of a few mobile applications which I don't use

• Could not load the brushes

  I need to use the brushes of border and that they won't charge. They are in the folder/Applications/Adobe Illustrator CS6/Presets.localized/en_US/Brushes. I am a CC Subscriber.

  Carol,

  The following is a general list of things you can try when the question is not in a specific file (you tried/made some of them already). 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  (1) close Illy and open again.

  (2) restart the computer (you can do that up to 3 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Hello, I bought the plan of photography, but Photoshop and Lightroom appear as trial only. I have already disconnected and record creative cloud but the problem persists :(

  I had used a test of Lightroom, but then he expired. So yesterday, I bought the photograph that supposedly includes Photoshop and Lightroom, but Phosothop only gives me the option of trial and Lightroom will not work because it says that the trial has expired.

  

  And my account

  

  I see you have a subscription of photography under the same email that you use with the forums, but it has not been activated.

  To correct the hosts file by using the cleaning tool: -.

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

• Trying to load the plugin snippetRunner sample, but it does not load

  I tried to load the pluggin SniipetRunner sample and open Indesign.

  InDesign has successfully opened and shows other plugins in the plugin drop-down list but now SnippetRunner

  any idea?

  I had the same problem. The SnippetRunner are located under 'Window' in the menu bar. A screenshot can be seen here: 5 http://stackoverflow.com/questions/23214516/indesign-sdk-sample-plugin-not-working/2323971 23239715 #

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Just lost my C drive.  I have a card with the code on it, but do not know how it be reinstalled.

  Just lost my C drive.  I have a serial number of product code of the card, but do not know how to do this

  Download from Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Install and enter your serial number.

• Could not load the brushes to CS5

  I caanot get brushes left CS3 for my new CS5. I copy / participated in the CS5 Presets/brushes folder but they are not displayed in CS5 - anywhere. Just to test the problem I downloaded a new brush (abr), indicated as being for CS5, but copy, drag, what ever, it will not be displayed in CS5 drop the list either. I'm totally lost. Can someone help me.

  And I bet that you are running the 64-bit version of Photoshop (but using the paths of 32 bits).

• PSE7 can not load the NAVE in organizer but can change

  I installed the update ACR 5.5 so I can work with images of my new Nikon D300s in PSE7. However, I can't load images NAVE in the Organizer. Strange things is I can open them in the editor indicating that ACR very well.

  This happens usually when you do not remove the old plugin ACR in the folder of file formats.

  Rename the old plug-in will not work. Move the old plug-in to a subfolder of file formats does not work.

• How can you save dead MacBook using FireWire for iMac? I can view all the files on iMac, but don't know how to back up before, I reinstall MacBook.

  My MacBook Pro doesn't start then you want to erase and reinstall iOS. Before doing this I want to back up all my files. If I connect to imac via FireWire I can view all the files, but how can I save it it?

  If your MacBook will start in target disk Mode, follow the instructions on how to set up and use...

  Share files between two computers with target - Apple Support disk mode

  But you do not want to share files, just to save them. You can make a "clone", using disk utility. For cloning utility purposes use a program likeSuperDuper! or double clone.