Successful with beeps start

Similar Questions

• Departure of superelevation for the S5 - 1140d HP Pavilion Slimline series but has 5 amberlight with beeps

  HP Pavilion Slimline series S5 - 1140d

  Windows 7

  No error message.
  Has been changing my CPU to a new location, after move when I tried, the monitor shows nothing, but the cpu fan is running, however, the light to the central unit began with blue, then changes to light amber with beeps for 5 times followed by a pause and then the beep and light orange continues for 5 times again. I tried out the RAM and putting the back but it's still the same. Someone has an idea is coz the materials have been damaged or loose? My CPU is probably 11 months + old you.

  CN, welcome to the forum.

  I suggest start by checking all the connections inside and out of the case.  It could be as simple as a loose connection.

  The beeps are called the BIOS beep codes.  Here's a guide to help you diagnose the problem:

  http://support.HP.com/us-en/document/bph07107

  There is a section at the bottom of the page that lists the Beep Codes for different brands of BIOS.

  If your problem is solved, please click "accept as a Solution.

• Z820 - button Power LED blinks 4 times (red) with beep... bad card (Quadro 4000) graphics?

  Hello

  My Z820 at the office is suddenly having a few hardware malfunction.

  When I turn on my machine, the PSU/system fans don't rev and the Power LED button flashes red with a beep 4 times.

  According to this page of troubleshooting, this indicates a faulty PSU on the new UEFI computers:

  HP desktop - computer does not start and emits a LED or a beep Code

  Section "code beep and LED descriptions.

  Get the exact model of LED as the example of "power failure".

  Then, I got a new power supply replacement. I still have the exact same model LED and beeps...

  So, I have drawn deeper and found that when I removed the Quadro 4000 card graphics and then put on my machine, the power button LED is lit in blue (led code ' computer-S0 (normal operation) "") and all the normal spin fans.

  The Quadro card seems to be the culprit...

  Unfortunately, I have no alternative graphic card laying to verify this around, I'm waiting for a replacement of the graphics card (via HP service) to arrive tomorrow.

  Is it possible that the power LED button code (4 times red with beep...) has nothing to do with a bad power supply and that my Quadro is bad?

  Dries

  Dry... that Z820 has been giving you headaches.

  Many fault codes have not changed since the previous workstatons.  I hit this series of beeps of error in the past, and often doesn't mean that the power supply itself is the cause.  It can be a hardware device to the bottom of the chain causing a power surge to power, triggering his "crowbar circuit: fault protection

  http://en.Wikipedia.org/wiki/crowbar _ (circuit)

  Here are the instructions to deal with this series of beeps of a previous HP xw technical and repair.  Note the number 2 in the troubleshooting instructions... usually you don't have to go down to 3, in my experience.  I think that you have already found the faulty unit:

  Loss of power.
  1. open the access panel and make sure that the power cable is properly
  connected to the system board.
  2. Locate the faulty device by removing all devices and then reinstalling one at a time
  until the workstation fails. Replace the device at the origin of the failure. Continue to add
  devices to make sure that everything works correctly.
  3. check the power supply feature.
  a. turn off the AC power.
  b. remove all cables internal power on the system board.
  c. connect the power supply.
  ● If the power supply fan turns and the BIST LED lights, then the
  power supply is good. Replace the motherboard.
  ● If the power supply fan does not turn or the BIST LED does not
  light up, replace the power supply.

• Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Hi Comintern,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

   

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Let us know the results.

• Is there anyone who can help me with Super Start

  I need assistance with Super Start. I checked the faqs and my problem is not covered.

  Great Start has a "backup" feature that allows you to export and import manually or via a "cloud" service
  http://www.enjoyfreeware.org/SuperStart/export-import

  There is also a folder named /superstart/ in the Firefox profile folder that contains various data files that are associated with Super Start. The file named sites.v1.json contains the data for the 'tiles' that are on the page "start". And there is a folder named snapshots with the images for the page tiles "start". Other files are in the folder / / superstart, but I know not what they are for - has in Super Start I've not used.
  https://support.Mozilla.org/en-us/KB/profiles-where-Firefox-stores-user-data

  There are also a bunch of about: config preferences for Super Start. I am a new user of Super Start, but do not have much experience with it. I installed only for having a "homepage" with tiles for 6 news sites I visit every day.

• How to move the "blue bar" with the start option and the clock and icons of a vertical__position on the left side of the screen to the bottom of the screen... has this before happen__once, can't remember what to do.

  How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen.  It's happened before and I forgot how to move.

  Hello pookprec

  Here's how to do it

  .

• Office restarts itself when it is stopped with the start menu and the power button.

  Original title: stop problem

  My office will restart itself when it is stopped with the start menu and the power button. I went to the start menu task bar to ensure that the setting was correct.

  Hello

  1. Press (Windows key) + R and type "regedit" and press enter.

  Find the following key:

  Geographical area: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  3. double-click on "PowerdownAfterShutdown.

  Then,
  Change it to '0' if it is '1' OR
  Change it to '1' if it is '0 '.

  And press ENTER.

  Then reboot andtry to stop.

  If this does not work, make sure that you change the value in regedit back to what she was original

  Try this one:

  Put the laptop to sleep then let it restart itself. Then run command prompt and

  Enter 'powercfg - lastwake. It should give you the description of what caused the alarm.

• Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

  Original title: battery

  When the battery dies on Windows 7 Home premium, what makes the look of the laptop screen as to everyone with the same computer? (IE black, dim and then black, dim and white and then black, Sun & blue, etc.)
  And you always get the "Windows did not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally)" Note?

  It could be a hardware problem, so it is best to contact DELL or a local technician if the problem persists.

  As a work around, I suggest to update the drivers of the computer display and check if it makes a difference.

  Download the drivers from http://www.dell.com/support/drivers/us/en/19/Product/latitude-e6410

• Backup did not complete successfully with an error code 0 x 80070001

  The original thread title: backup error

  My first full backup did not complete successfully with an error code 0 x 80070001, what can be done to fix it?

  See link below and check your libraries. Are there any that you don't need? Do not create? This happened to me also and I got a library quick text that I didn't need, or created, and it's the same question. Note: The error number right could not be the same, so do not let alone to sway you.
   
  Backup Windows error (0 x 80070002) when adding custom libraries
  http://cogitation-rumination.blogspot.com/2009/12/Windows-backup-error-0x80070002-when.html
   
   

• Why can't I just move on with windows7 starter to windows 8, my computer is only 9 months since purchest?

  Why can't I just move on with windows7 starter to windows 8, my computer is only 9 months since purchest?

  So it will not uninstall then install my programs, or what, then another question is the offer for $14.99, that's what I was watching and I filled a free upgrade and probably has not been fully tested for this upgrade, he said I would be able to get the upgrade, but there is no decrease in my emails guess still in work. While {s it improves just $ 40 million that I should wait for a version pro or ultimate?

  And what will happen to my saved files?

  and I'll be able to restore to the factory with warranty setting and I can use my series to my computer for the upgrade?

  NOW please if you don't know it please tell me I would like to know some facts and since there is so much development, in my view, the pro version is yet to come, so...

  Windows 7 Starter is not eligible for the offer of $14.99.  Only Windows 7 Home Basic, Home Premium, Professional and Ultimate. If you must upgrade to Windows 8, then you have to wait on the upgrade $ 39.99 for Windows 8 Pro that will become available October 26, 2012.

  The upgrade will allow you to keep your applications, personal files and settings.

  Yes, it should be able to restore the factory State, but always backup before making changes on your computer like installing an operating system:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

• I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Friday, October 19, 2012 19:03:30 + 0000, * address email is removed from the privacy * wrote:

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Two points:

  1. it is unlikely that your current installation would work if
  you have changed motherboards. You need to reinstall itself.

  2 but you cannot use your current copy of Windows if you change
  motherboards, not even if reinstall you it cleanly. The largest
  disadvantage of an OEM version, is that its license it binds permanently
  the first computer, it is installed on and Microsoft believes that
  If you change the motherboards, another computer. It can never
  legally be moved to another computer, sold or transferred (except with)
  the original computer). If the computer dies or is stolen, your
  license dies with him.

  Ken Blake, Microsoft MVP

• Just installed my full version of Creative Suite Premium of CS3Production on my new desktop PC with success with one exception.

  Just installed my Creative Suite CS3 Production Premium full version on my new desktop PC with success with one exception.

  Despite the choice of language = English at all stages, the bridge has loaded in Japanese, including all dropdowns.

  How to return to English please.

  Keith M.

  Hi keithm.

  Choose Edition > Preferences (Windows) or Adobe Bridge > Preferences (Mac OS), and then click Advanced. Keyboard shortcut: CTRL + K

  Do one or both of the following: choose a language in the language menu to display menus, options, and tool tips in that language. ...

  Click OK and restart Adobe Bridge.

  

  Related link: Bridge help | The Adobe Bridge workspace

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Someone at - he had success with ConfigurationAddMachine?

  I was unable to get the internal interface ConfigurationAddMachine method to work for me.  Hoping someone out there might have a glimpse of what I might hurt.

  I use Java interfaces generated from the internal WSDL.

  My code looks like:

  int configId = soapProxy.configurationCreateEx (workspaceConfigName, 'description');

  int templateId = soapProxy.getTemplateByName ("32EN-WXPSP3") .getTemplates () .get (0) getId();

  int machineId = soapProxy.configurationAddMachine (configId, templateId, machineName, 'description', 0, 0, null, 1);

  The first two calls complete successfully with the expected results, but the third always results in an error message of "Object Reference not set to an instance of an object", which is not useful enough to direct me towards my problem.

  I'm a little unsure of the correct value for the last parameter, the API refers to it as ip_assignment_type, which exist nowhere else in the API.  I have tried several different int unchanged values in the result.  I thought it's maybe the ordinal value of SOAPIPMode, but if that were the case it seems they would have just done as the type.  We have only a single network, "Default virtual Machine", which uses a static Pool of IP, and I just want to create models of machines that use that.  Someone at - it had any luck with this?

  We use Lab Manager 4.

  Thank you

  Todd

  You mean that if I want to get marked correct, I answer actually work?

  I run the following code in my lab LM4 and it worked.

      protected void soapInvoker(LabManagerX0020SOAPX0020InterfaceSoap proxy) {
          manditoryAttribute(destinationConfig,"destinationConfig");
  
          int configID = proxy.configurationCreateEx(destinationConfig, "description");
          ArrayOfTemplate template = proxy.getTemplateByName("win2k8R2_x64_Virgin");
          int templateID = -1;
          if (template!=null) {
              templateID = template.getTemplates().get(0).getId();
          }
  
           proxy.configurationAddMachine(configID,templateID,"Name","description",0,0,"192.168.0.20", 0);
  
          configurationInfo(destinationConfig);
      }
  }
  

  I enclose the XML of the interaction as an attachment

  .

• IMP db every success with warnings

  Looking for options to fix those or I can ignore them? What would be the side effect if I drop/cascade users and rerun imp once growing tablespace TS_PUBLIC size or I shouldn't do? and just difficulty warnings little or even just ignore them?
  
  Most of the tables (I'd say 95%) & there data imported successfully after full imp, db size is around 80GB, import completed successfully with warnings, which is less...
  
  
  
  IMP-00017: statement failed with error ORACLE 1659:
  "CREATE TABLE"CA_QUERY_1"
  «ABLESPACE «TS_PUBLIC»»
  
  IMP-00041: WARNING: object created with compilation warnings
  ' CREATE THE FORCE 'ADMIN' VIEW. ". CHECK_EXTENTS_V ".
  
  IMP-00041: WARNING: object created with compilation warnings
  "CREATE TRIGGER MT1758. MEDDRA_MT1758_THE_SYN_UPD ".

  DBA2011 wrote:
  Thank you, advice to confirm that all the imp and all data has correctly applied in the new db, before giving it to the customer?

  Review the LOG file.

• HP desktop computer starts but with beeps instead!

  Desktop HP does not start. Sounds 4 beeps with power light blinks red w / each beep.  Help!

  Hello:

  This beep code means that your power supply has failed. If your PC is under warranty, please contact HP support.

  If she is no longer under warranty, you will need to either buy a new power supply, or a new PC.

  Paul