Loading the content of the presentation.

Similar Questions

• Why Safary does not load the content of pages?

  Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.

  Sorry if my English is not good, I am a Brazilian who is still learning English

  Your English is very good!

  Redirects are usually due to adware or malware.

  Download the run MalwareBytes.

  It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.

• Loading the content of the old iPhone to new iPhone

  I was very disappointed when I tried to load the content from my old iPhone in my iPhone via iTunes. I received an error message saying something to the effect that my iPhone backup file was too old or obsolete. I had everything backed up my old iPhone an hour before. It would have saved me a lot of time if I could use this backup for my new iPhone. Very disappointing to have it loaded as a new iPhone (containing only the Apple iPhone applications.)

  Are you sure that you don't have a message indicating that the new phone could not use the old backup because the old backup contained a new version of the iOS the new phone has on it? You cannot restore a backup from a device running a newer iOS on a device with an older version of iOS on it. In this scenario, you must update the new phone to the latest version before you can use this backup.

• When you open a new window, it automatically loads the last content pop up (?) and I'm unable to type in the address bar or open a new tab in the new window.

  I don't know if they are technically pop-up windows (for example, if you perform a search on kayak.com, it will automatically open a new window of priceline.com with the search results), but that happens with Blocker on or off. Other examples are a little info to a financial site window or .edu, which opens a session is about to expire, or answer a FAQ (with the exception of the priceline example, these windows have an address bar or view a URL). In any case, once these windows are closed, if I try to open a new window, it will automatically load the content of this "pop-up". Whenever he does, I'm unable to type in the address bar or open a new tab in this window.

  How can I fix it? What I want is to open a new window which is empty, not load the previous contents.

  No, I just realized that I was holding Command-Shift-N rather than command-N

• Experienced Manager: unable to load the information of the element content of content.xml

  I use experience in tools and frameworks 3.1.2 handler.

  By browsing the content tree set up in my experience Manager application, I clicked on a content item to review the configuration. Although not explicitly made changes to this content, I clicked on another element of content to review its configuration, I received a pop-up message indicating the content item that I had been posted has been changed and you are prompted for me to ignore or cancel this action. Well instead of selecting an action, I closed the browser instead. Now, when I go back in the experienced Manager and try clicking on this same piece of content, I get a spinning hourglass for 10 seconds approximately and an error message appears stating...

  Could not load the content item information of http://www.mysite.com/IFCR/sites/MyEndecaAppName/content/Web/categories/pages/content.XML

  It seems that close the browser on a pending action to ignore or cancel the change may have corrupted this piece of content in some way, so that I can it display is no longer in the experienced Manager.

  Is it possible to 'Status' maintained by frameworks and tools 3.1.2 could have been damaged because of this simple action, and if so how can I do to fix this?

  Thank you!

  PROBLEM SOLVED

  This has proved to be a problem with the local browser caching! In Google Chrome, I just erased ALL my data in the browser history, and voila - I could access the item of previously inaccessible content without problem in the experience Manager.

• How to get the nodes size in the presenter content model

  Hi all

  I created a content model of presenter to display a list of content carousel with x of y (current number of total size).

  also I do not use af:carousel component used instead af:iterator.

  is it possible I can get number total i.e. nodes size outside a java bean.

  something like #{nodes.size} or nodes.length.

  Please suggest something which can fly running (i.e. performing edition of the model should be enough)

  Thank you

  -Yves

  Hi Yves,

  You should be able to use #{nodes.rowCount} to EL.

• Content model view presenter not showing the content of the data file for the contributor to Site Studio

  Hello

  I created a data file for contributor to the Site Studio (11.1.1.8.0) using my definition of the region RD_ONE_ELEMENT.

  Here is the XML of the contributor data file (DATA_ONE_ELEMENT.xml)

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  " < = xmlns:wcm wcm:root ' http://www.Stellent.com/WCM-data/NS/8.0.0 "version ="8.0.0.0"> "

  < wcm:element name = "TITLE" > This is the title... Successful. < / wcm:element >

  < / wcm:root >

  It's the definition of the region (RD_ONE_ELEMENT)

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < regionDefinition xmlns =" http://www.Oracle.com/SiteStudio/element/ "" "

  " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xsi: schemaLocation =" http://www.Oracle.com/SiteStudio/element/ http://www.oracle.com/sitestudio/ss_element_definition.xsd' > .

  elements <>

  < elementReference name = "TITLE" location = "ED_PLAIN_TEST" >

  < property name = "label" value = "TITLE" / >

  < property name = value "description" = "" / > "

  < / elementReference >

  < / items >

  < property name = value "description" = "" / > "

  < name dataProperty = 'metadata' > < / dataProperty >

  < name complexProperty = "switchregioncontent" >

  < property name = "createnewxml" value = "true" / >

  < property name = "createnewnative" value = "false" / >

  < property name = "choosemanaged" value = "true" / >

  < property name = "chooselocal" value = "false" / >

  < property name = "choosenone" value = "false" / >

  < valueList name = "createnewnativedoctypes" >

  < / valueList >

  < name complexProperty = "choosemanagedquerytext" >

  < property name = "corecontentonly" value = "false" / >

  < name dataProperty 'querytext' = > ((xWebsiteObjectType & lt; matches & gt;)) 'Data file') & lt; and & gt; (xRegionDefinition & lt; matches & gt; 'RD_ONE_ELEMENT')) & lt; or & gt; (xWebsiteObjectType & lt; matches & gt; 'Native 'Document') < / dataProperty >

  < / complexProperty >

  < name dataProperty = "defaultmetadata" > < / dataProperty >

  < / complexProperty >

  < / regionDefinition >

  In my portal, I added a Presenter content workflow. On the content tab, I put DATA_ONE_ELEMENT (one piece of content). On the model tab, I chose my Presenter content model.

  I had created a content model project Presenter DesignWebcenterSpaces (that I got from zip file - http://download.oracle.com/otndocs/tech/webcenter/files/DesignWebCenterSpaces_11.1.1.8.0.zip) here is the code:

  Here's the code for the view model:

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < = xmlns:jsp jsp:root ' http://Java.Sun.com/JSP/page "version ="2.1" "

  " xmlns =" http://xmlns.Oracle.com/WebCenter/content/templates "" "

  ' xmlns:af = ' http://xmlns.Oracle.com/ADF/faces/rich "> "

  < var dt:contentTemplateDef = "node" >

  < af:outputText value = "#{node.path}" id = "ot1" / > "

  < af:outputText value = "#{node.propertyMap ['RD_ONE_ELEMENT:TITLE'] .asTextHtml} '"

  ID = "ot2" / >

  < / dt:contentTemplateDef >

  < / jsp:root >

  The output I see on the Web page is as follows:

  / EXTASC/DATA_ONE_ELEMENT. XML

  I don't see any other texts. Which means, there is no output of:

  < af:outputText value = "#{node.propertyMap ['RD_ONE_ELEMENT:TITLE'] .asTextHtml} '"

  ID = "ot2" / >

  Can someone help me in this? I would like to see the value of my Web page TITLE.

  Hello.

  I am currently weapons... This is not normal, as is a common task.

  Sorry, but we do a general audit of the configuration before enabling the TRACE log levels because it should be a simple thing missing.

  Can you confirm that WebCenter content are activated as a result of components (UCM Console-> Administration-> server-> Component Manager Admin)? :

  - Studio site.

  -Site of Studio for external Application.

  -WebCenterConfigure

  -LinkManager

  -DBSearchContainsOpSupport

  
  

  In the case of be activated all (don't forget to restart UCM if you turn any component). Make sure that you have done as following steps:

  1. Log in to Content Server and open the Administration page.
  2. Select the Studio Site Administration, and then set the default Project Document information.
  3. Accept the default settings, and then click Update.
  4. Select the Studio Site Administration, and then to set Document information by default Active Web.
  5. Accept the default values and click Update

  Kind regards.

• Failed to load the metadata server using GET_DOC_METADATA_INFO content model?

  Hi all
  
  I create connection in Jdeveloper to the repository of content both are 11.1.1.6.0 version. I'm creating RIDC Socket type Socket.
  everything by testing the connection I get under Error.UCM runs in other ways machine come IP. trying to connect from my local Jdeveloper.
  
  Test failed:
  Failed to load the metadata server using GET_DOC_METADATA_INFO content model.
  Permission denied. Address ' XX. XX. XX. XX'(IP) is not an authorized remote socket address. (IP replaced by XX...)
  
  Why his error.do showing that I need to put any changes of the UCM let me know problem question
  
  Please give me an idea about this error and the solution for the same.
  
  
  Concerning
  Siva sery

  To eliminate the first manifesto, see this post: fail to connect to the content if server use 'web' for the RIDC socket type and check that the other IP is allowed, amongst, IPs (you can use a mask, or type it directly) - do not forget to restart the server after the change.

  If this does not help, test, if other services such as DOC_INFO_BY_NAME can be called via RIDC, or if they have the same problem.

• Export Audio Captivate, importing to 9 presenter does not load the published file.

  Hi all

  Quick back-story. We bought a subscription to Captive when they announced HTML5 support, but due to lack of devices supported, we also bought a subscription to the presenter who has a mobile app. Some of our content have been created using Captivate now these projects had voice over I had to export and rename audio files to associate with the correct slide. I went ahead and manually imported each individual audio file to the correct slide in the PowerPoint presentation.

  My problem now is when I publish the PowerPoint (2007) with 9 to present project does not charge that he has just the rotation he arrow. For some reason any the project works in "Preview" mode, but not when it is published. Is there a way to find the path where are stored the cache preview files?

  Any help would be greatly appreciated.

  Hi Jerry,

  Please check the following settings:

  GoTo Adobe Presenter > quiz > Manage > Reporting

  Make sure that AICC is not enabled.

  If the AICC report is enabled, it will not play in Destop mode.  Please disable the AiCC.

  If this isn't the case then plase share you sample file for me to [email protected] and will try to solve your problem as soon as possible.

  Thank you

  Sunil

  Adobe Presenter Engg team

• In the html content of dps, it has a url link to a pdf file. When click on url to load the pdf file, the zoom does not work

  I load html content in an application of dps.

  In the html page, there is a url to a pdf file. When I click on the url, the page loads a pdf file.

  Here's the question: is able to zoom in pdf?

  It's difficult because I can zoom in the first html page, but when I load a pdf file, zoom effect does not work.

  Please let me know if this is a way to make the pdf was able to zoom in.

  Thank you

  Post edited by: monsteryu

  No, this is not possible.

  Neil

• Load the content problem (address)

  Hey
  
  I hope you can help me...
  
  I created a site in Flex 4 that load the content of a database. Site but fine...
  
  the address is: http://coldhawaiispotguide.com
  
  But if I type the address with "www".
  
  Example: http://www.coldhawaiispotguide.com
  
  The site failed to load content?
  
  Are there some who have an explanation for this problem?
  
  Thank you
  
  Troels

  Flash security both URLS are not equivalent and therefore a security boundary

  will be in effect.  You can use a crossdomain.xml file to manage different

  ways to express the URL if you do not find a way to make them all use the

  exact same domain name.

• How to load the contents of a layer as a selection in photoshop CS4

  Hello

  In photoshop cs4 when I ctrl-click on a layer thumbnail in the layers panel, photoshop select any layer not its content.  How to load the contents of a layer as a selection in photoshop cs4?

  Thank you

  to load the contents of the layer as a selection, you go to the Panel layers and Ctrl + click on the RGB.

• How to make ffx actually load the content of all the tabs from last session

  As of recently, when I restart ffx, all tabs from last session are open, but not charged. I want that they all load immediately, rather than load it only when I concentrate on each tab.

  Is this possible?

  Thank you

  -)

  Options - > general

  clear - don't load the tabs until you have chosen

  This 'case' is active only if show my windows and tabs from last time is on it. If it is grey and inactive, you have an installed extension which is related session restore and pref is overridden in the Options. Take a look at downtown in this extension that pref or a similar preference.

• Could not load the widget in the library Adobe Muse, the system presents 'importer error library, format 295 of the emergency room. Check if a later version of Muse. I have the latest version of Muse, tell me, how to download a widget?

  Unable to load the widget in Adobe Muse librarySystem Watch "error importing libraryemergency room format 295 . Check If a later version of Muse. I have the latest version of Muse tell me How to upload a widget?

  This error means that the widget you want to use in your version of Muse is not compatible with the Muse CC 7.4.

  There is 2 option for you.

  1. upgrading to a 64-bit system so that this latest version of Muse can be installed on your machine so that the widget can be installed.

  2. contact the developer of the widget to check if they can provide you with a widget that is compatible with the Muse CC 7.4.

  looking at the widget, I think that you want to add a video by Muse. You can also try the suggestions in the link below that allow you to add videos of codes.

  How to integrate a mp4 video in my muse site.

  Kind regards

  Vivek

• Flash Player stops, loading the content after 2nd LoadMovieNum called?

  I'm having a problem to test a swf file in Chrome and Mozilla. I'm using Flash Player 18.0.0.29.

  What is supposed to happen is: page loads Web-> Swf poster-> click on a button that loads a new swf via LoadMovieNum-> click another button to load the next swf via loadMovieNum. At this stage does not load the last swf.

  Details:

  The SWF seems to load in its HTML on a server and it keeps loading SWF as they are called, all simply not locally.

  I have a few hundred of them on the remote server, they seem to agree, but fail if I controlled the local copies.

  Unfortunately, there is a controller to access the server and I can not test the new work there. Haven't really needed during the last 5 years.

  VSP has also fails if I drop the local copies on a local browser, so it doesn't seem to be a problem with the html container.

  Could this be a bug or security with the new player restrictions?

  This seems to be fixed in the next update of flash player which is currently still in beta.

• Error "cannot load the user's profile.

  user profiles

  Due to a system restore after doing this process when I tried to connect, I get a message "Unable to load the user profile" help please!

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner