Locate the screw example on different Windows computers

Similar Questions

• cannot locate the file to install silverlight, windows 7 64 bit, c:\6f4c8317905ddd8e80bc5f1b238f5ea2\

  Every time it says I need to update however windows update fails, silverlight site stand alone fails to Setup. Say Windows cannot locate the file, or can't access the Setup program. I've tried everything I know including UN-installing and cannot locate the file.

  Hi Dstek,

  This could be due to installation damaged the existing version of Silverlight on the computer. So, must uninstall completely from the computer and then try to reinstall.

  I suggest you refer to the Microsoft KB Article below, try the troubleshooting steps in it and see if that solves the problem.

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  Hope this solves the problem. Please get back to us with the result.

• Is it possible to find the MAC address in Microsoft Windows computers.

  Original title: help
  its possible find in microsoft net computers IP - MAC address, and where I need to write if I run to

  Hello

  Yes, the MAC address is present in every system that connects to the Internet and runs any version of Windows.

  MAC address stands for Media Access Control (MAC address) is a unique identifier assigned to the network interfaces for communications on the physical network segment.

  To find the MAC address on Windows XP computer try the steps below.

  (a) click the start menu button in the Windows taskbar.

  (b) click 'run... '. "in this menu.

  (c) type "cmd" in the text box that appears. A command prompt window launches on the desktop.

  (d) in the command window, type ' ipconfig/all'. The details are displayed for each of the network adapters on the computer. Computers installed with the software VPN or software emulation will have one or more virtual cards.

  (e) the "IP address" field contains the IP address of the network card.

  (f) the 'physical address' field contains the MAC address of the card.

• Where is the hyper Terminal option in Windows 7?

  Hyper Terminal Server in windows 7 Pro

  I'm not able to locate the hyper Terminal option under windows 7 Professional, please update on this issue.

  Hi, hyperterminal is not available in Windows 7, it was also not available under vista. It is possible to run hyperterminal, although it is NOT officially supported. If you have a Windows XP CD, look for hypertrm.ex_ and hypertrm.dl_. Copy it to your hard drive. Extract them using a program (I recommend 7zip) and place them in the same directory. Run the .exe will allow you to use hyperterminal. You can also view this Web page. social.answers.microsoft.com/Forums/en-US/w7programs/thread/938d4225-30cd-4db5-a0a0-bdeb9c439269

• Windows 8 100% use of the disc on 3 of my computers! Can not find a solution...

  Hello users of Windows 8.

  I'm running Windows 8 on 3 PCs (2 computers laptops, desktop 1) and I'm going to 100% usage of the disk on each of them. It started on one of my laptops, and then my desktop and now (started about 4 days ago) it happens also on my wife's cell phone. I have lived these forums and many others still looking for corrections of over and over again.

  I started having this problem at the beginning of 2013 on my Toshiba laptop. I waited patiently a correction (which is obviously never) until my office started having the same problem and I started to study the problem myself. I ran across countless people who have the same problem as I am. Some find corrections and some did not. Unfortunately have not yet found a solution to one of my computers running windows 8.

  My PC experience this problem at different times. My laptop experience this problem at startup, and which seems to be irregular intervals, throughout the use. My office has the problem, if I run a game or some programs (e.g. Microsoft Word, a CAD program, Firefox etc.).

  The problem that causes this on my desk is related to the SYSTEM in the Task Manager. I opened "Go to details" and he directs me to (NT Kernel System &) which in turn heading C:\Windows\System32\ntoskrnl.exe.

  The problem that causes this on my laptop is related to the SERVICE HOST: LOCAL SERVICE (usually restricted or sometimes without impersonation network). All lead me to a svchost.exe.

  These are the things that I tried on my laptop and desktop:

  1. update of the BIOS (already had updated versions)
  2. Update ALL my drivers
  3. my AV (Avast!) uninstalled and reinstalled
  4. uninstalled my AV (^ ^ ^) and I tried to use MSE
  5. uninstalled all AVs and tried to start the PC
  6 installed all Windows updates
  7. no installed VirtualBox
  8 disabled indexing files on the C: drive
  9. set to High Performance power management (not worked but would have not left like this on my laptop in any case)
  10 disabled the automatic updates
  11. off fragmented my records
  12 optimization of disk turned off
  13 clean my registry with CCleaner
  14 erased all the options in the Indexing Options
  15 Ran SFC/Scannow in a high CMD
  16 set my virtual memory to a custom size (twice the size of physical memory)
  17 disabled some services others have said are causing the problem. Disabled services:
  A. WSearch (Windows Search)
  B. WMPNetworkSvc (Windows Media Player Network Sharing Service)
  C. Defragsvc
  D. PLA
  E. Sysmain (Superfetch - did not work, but still once, even if that were the case I am not leaving this off service)
  18 start in Safe Mode. (No difference)
  19 run "Repair my computer" from the disc of Windows 8
  20 re-installed Windows 8 on my laptop
  21. much more "patches" the list could go on and. Those who I think are relevant mentioned above

  Computers, on which I tried these are:

  My laptop (Toshiba Satellite C75D, stock)
  My office (Custom, Phenom XII 940 BE CPU, Mobo from ASUS m3a78-em, XFX AMD Radeon GPU HD, 6 GB of ram DDR2 7790)

  I have not tried one of these "Bugs" on my wife's cell phone:

  ASUS X501A

  Any help with this would be greatly appreciated.

  I would also like to know why Microsoft has not yet solved this problem. How many people must experience this problem before you decide to do something. I saw people having this problem dating all the way back for 2012. I saw hundreds if not thousands of people having this problem and trying to find patches online, so I guess that many, many more are not of or don't know they have it.

  As customers, what do we have to do? Menace of a petitions signed by restless customers ready to bombard the BBB complaints if nothing is done? I would absolutely describe Windows 8 with this question like a defective product. Is there anything we can do to listen to Microsoft?

  * Yes, you're right.
  I stopped the automatic updates and deleted everything located on: "X:\Windows\SoftwareDistribution\Download."
  He has become much better. Then I disabled the windows swap files. (using the TuneUp Utilities) and even better. and then stopped defragmentation automatic of all readers and also done the Clean Boot and now the problem has disappeared, and the PC flies! Better than ever.

  I hope that the problem will not return again.

  Never go around everything related to windows updates, as I pushed him suddenly a button to use windows update to install a driver and the PC has been locked again and killed at the use of the disc.

  Here this will help you guys :) *.

  Sorry I forgot to mention: D!

  I think so... This o.o. worked... All of a sudden when I deleted the folder... My machine stopped the 99%... Now remains at 1% oo *? ....

  If you'll notice, you did some update Windows or your pc must have... For example, updates could try to settle... When I deleted the folder it took like 10 minutes to remove.

  After waiting like 10 side my drive keeps 2%, it does not go when iddle!

  It's a nice solution, thanks a lot!

  your welcome my friend.

  If the problem is back once again, try to disable the "superfetch" and "prefetch". It's more important that deleting those files and has the greatest effect on performance.

  You can use this guide here:

  http://www.tekrevue.com/Tip/disable-SuperFetch-prefetch-Windows-8/

• TestStand deployment error - error: unable to locate all the screws saved subVIs because it lacks a Subvi

  Hello

  I am a systems and software engineer based in Vancouver. I developed a test system automated using 2013 LabVIEW and TestStand 2013 with custom operator interface.
  I encountered problem 'lack screw' which is kind of weird because I went to analyze the sequence for the TestStand Deployment Utility and TestStand sequence editor > files broadcast tab.
  But when I tried to build the installer and reach the point ' called distribution screw, it always throws an error saying "an error occurred trying to read the error of the screw, possible because the screws are not saved in the latest version of LabVIEW. Do you want to save any changes now? ". I tried both (that is to say Yes and no) for this option, but it has not solved the problem.

  This is part of the original error message displayed in the TestStand deployment utility:
  " ***************************
  Then the treatment live...
  Error: Cannot locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.
  The chain of calls to missing screws:
  1 - ATE_AccelerometerTest.vi
  2 - CreateAndMergeErrors.vi (missing)
  3 - LogControl_CheckForErrorSendUpdates.vi (missing)"

  All screw missing come from userlib.

  Actions performed:
  -File of sequence analyzed by using the TestStand Deployment Utility and TestStand sequence editor
  -Checked "search directories" include all the necessary files/dependencies.
  -Mass to compile the directory of the missing screws
  -Added all the necessary files and folders in the workspace file.

  The result is always the same function according to the actions performed.

  Debugging last I did earlier, is that I tried to find the sequence and steps missing screws as shown above (for example ATE_AccelerometerTest.vi)
  and I discovered that the measure appears to be an empty action step. This would be possible even if it has already passed the analysis?

  Other considerations include:

  I'm using sp1 2013 LabVIEW and TestStand 2013. We tried the building three 3 computers and we only managed once to a freshly installed comptuer.

  Hoping to hear from you soon.

  Kind regards

  Michael Panganiban
  Engineering systems and software
  www.Synovus.ca
  [email protected]

  Hi all

  We were able to solve the problem. First of all to note is that the release notes in 2013 TestStand is obsolete and we confirmed engineer OR Austin TestStand 2013 works very well with LabVIEW 2013 SP1.

  Second, we played option deployment TestStand that solved the problem. Attached are the pictures.

  We have activated just the 'delete unused Components VI'. It could be one of the libraries (lvlib) we have included in the compilation, but we've not thought of it again because we have checked that all the screws are working. It could also be something else that I think is very hard to find from information. However, if someone had the same problem, this could be useful.

  Again, we return to using 2013 TestStand and LabVIEW 2013 SP1.

  I appreciate all comments and feedbacks. Otherwise, you can close this request for assistance.

  Thank you.

  Kind regards

  Michael Panganiban

  Engineering systems and software

• I am a user of Picasa for a long time conversion to Lightroom.  I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox.  I'm able to share the LR catalog, but on the second system images can be found as s

  I am a user of Picasa for a long time conversion to Lightroom. I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox. I'm able to share the LR catalog, but on the second system images can be found as a prefix system DB files have different user names. Any ideas?

  At the point of Lightroom to another location for photos, follow these instructions:

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  Note: If the catalog is constantly being synchronized to DropBox, you will most likely follow these instructions whenever you open the catalog on another computer.

• How to locate the folder the user on Windows XP desktop?

  Original title: how to locate desktop on windows professional

  Recently, my computer crash with blue screen.  I downloaded the windows professional in a new folder on the same drive.  Now I'm trying to locate the desktop folder in previous

  Hi razasum,

  We recommend that you open the drive where you installed Windows, for example c :) and try the following steps:
  a. open the Documents and Settings folder.
  b. open the user folder and locate the desktop folder.

  If you are looking for a specific file or folder, and then try to search for it.
  See How to search for files and folders in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error - cannot locate the DNS server of comments when try to use the Windows XP Edition computer remotely family assistance.

  Original title: cannot locate the comments of my windows xp home dns server.

  We have all two windows xp home, only difference, I can say is in the exception of firewall computers comments tab, there is no box remote assistance to check or uncheck.
  whenever we try I get it's message. Could not locate dns comments.
  something terribly simple became simply terrible.
  Thank you

  THANKS A LOT FOR YOUR CONTINUOUS SUPPORT. USING WINDOWS MESSENGER AND ACTIVATE THE REMOTE ASSISTANCE, AFTER FLUSHING DNS CACHE, WE HAD NO CONNECTION PROBLEM. ALTHOUGH STAY CONNECTED WAS A PROBLEM. NOW IDENTIFIED AS THE NETWORK ADAPTER ITSELF IS DEFECTIVE. I WAS ABLE TO SOLVE MOST OF THE QUESTIONS ON MY FATHER'S COMPUTER, IMPOSSIBLE WITHOUT YOUR TUTALIDGE. SO I HUMBLY GIVE THANKS TO PEOPLE LIKE YOU WHO UNSELFISSLY GIVE THEIR TIME. I AM OF COURSE SPENT ON CREDIT TO MY FATHER AND OTHERS SO THAT THEY TOO WILL SHARE THIS EXPERIENCE WITH OTHERS. AT THE PRESENT TIME, HE HAPPILY TALKS TO FRIENDS IN THE OLD COUNTRY IN THIS ONE. HIS 'SOCIAL' NETWORK ONCE MORE ALIVE WITH OLD FRIENDS. Thank you very much.
  RON

• Whenever I type a research investigating all the search box, I click on a link any takes me into a different window, so I wanted to

  Hello

  I use Internet Explorer 8. Whenever I type a research investigate the entire area of research I get the normal lists of links to my request. Any link I click on / access to I always get a different window, so I tried. I get the yellow pages, new search sites, ads for better service, the domain information. Just a huge amount of ads. The only way I can avoid this problem is to type the address of the link actually in my address bar. I'm sure I have a virus, but so far have been unable to remove or to find it. Does anyone have any suggestions as to a solution to this problem?

  Thank you all in advance for any help for this situation.

  Thank you

  Tim O would be

  * original title - search problem - Virus *.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. Please confirm that you have all installed McAfee Antivirus and Avira AntiVir and Microsoft Security Essentials (MSE) & loading at startup.

  [I am surprised as same Windows Update works with three installed antivirus applications!]

  2. has your McAfee subscription expired EVER (if only for a day or two) since you have owned this computer?

  3. when (dates about) were installed MSE and Avira AntiVir?

  4. had the pre-installed McAfee trial free period already expired by the time you bought your first McAfee subscription?

  4B. do you (a) AND free trial preinstalled McAfee uninstall THEN b download/run the McAfee Consumer products removal tool & restart (c) BEFORE you installed your first purchased McAfee application (for example, McAfee VirusScan)?

  5. is Firefox, Chrome or any other alternative browser installed?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; Advanced SystemCare. AVG PC TuneUp. PCTools optimizer; CCleaner)?

  7 is a brand new computer or used when you acquired?

  8. Finally, is this the same computer as in this thread more early of yours? -Online http://answers.microsoft.com/thread/6bf9e802-bbb2-4aa3-b15a-02b67fa7816e

• Where to get the authentec fingerprint drivers for various computers laptops hp that supports the functionality of the biometric device in windows 7?

  Hello

  We build a Windows 7 SOE for a large company that takes care of many models of computers laptops hp. Each of these laptops comes with a fingerprint reader, and we would like to use the built in support of fingerprint (biometric devices) reader that is running windows 7. The models that we support are as follows:

  • HP 6910P
  • HP 6930p
  • HP 8510w
  • HP 8530w

  We tried using the drivers of fingerprint Authentec (aes2501a) on the hp website, but after the installation, the biometric device option is not in windows 7. We contacted HP about this and they said that we must use the driver coming from windows update before this option appears. After installing the driver from windows update, the option of the biometric device seemed that hp said. Therefore, because of the way that our SOE is built, we demand that the executable that is identical to that on windows update. Anyone know where we can find packages both x 64 and x 86 for this device driver, which are the same as those found when you go to update windows on these machines running windows 7? Let me know if you need any clarification.

  Thank you

  Hi Mustapha ETS.

  Step 1: Locate the stand-alone file by inserting the device model number
  a. visit http://catalog.update.microsoft.com/v7/site/Home.aspx
  in the search box, enter the model number of the perimeter search of the driver.
  c. download the right driver for your windows and install it successfully on all computers.

  Note: If there is no available stand-alone file, I'm afraid you'll have to visit update of Windows on all computers and the installation of the update done or contact the device manufacturer to obtain the driver.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot locate the folder my pictures after I installed/upgraded to windows 7 Ultimate

  I recently updated my Vista to Window 7 Ultimate program. Before that, I had copied all my files, including images on a USB drive. Once Windows 7 had insow bee can I had lost a folder of photos. How can I get it back?

  I tried to open the folder called 'window photy Gallery', I received the following message is displayed:
  [Window title]

  Location is not available

  [Content]

  C:\Program Files\Windows photo library made reference to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to a different location.

  [OK].
  My Tel No:
  Please help
  Kind regards.
  Smail

  Hello

  Windows Photo Gallery is a program that displays all the images that are located in the folder images C:\Users\your utilisateur\Mes . This program does not store the photos.

  Search the hard disk to a folder named Windows.old. This folder will contain the personal data of the previous installation of Vista .

  Open the Windows.old folder, navigate to the pictures utilisateur\Mes Users\your folder. You should see all of the Vista installation in this folder.

  Copy or move pictures to the my pictures folder in the new folder of Windows 7 .

  Let us know if you have any other questions.

  Concerning

• Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?

  Cannot install network printer on Windows 7.  Detects the printer then it says cannot locate the driver.  All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions?  How can I fix it?
  Windows Server 2008 network.  Printers have ip addresses. Install the drivers from the Print Manager.  /Terminal Server Workgroup installation.

  It's the same situation with XP.  The print driver names must match.  If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer.  This is just my assumption, please correct me if this isn't the case.

  The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Cannot tracert from Windows computers/servers given that the firewall Upgrade

  I upgraded my PIX to version 7.0. (1) 5 and since the upgrade I can do any road route from windows computers, even if the rules never changed in the firewall. I can make roads trace my 3750 switches but from what I've read they use different protocols anyway.

  Here's the statement I have in my PIX515E

  any any icmp silverside

  Do not have that on all interfaces.

  Any help will be much appreciated.

  Thank you

  Aaron

  Hi, I just recently read the discussions of support and to install simply a PIX with version 7.0 code you need to change the default policy that maps the PIX built under version 7, illustrated below, it worked for me in my installation.

  Policy-map global_policy

  default inspection class

  inspect the icmp error

  Kind regards

  Andrew.

• Install Windows 7 on the same computer with different drives

  I plan on building my first computer soon and I want to run Windows 7 Home Premium.  If I install this version of Windows 7 and that I update the processor or hard drive later, I'll be able to install it again? http://www.Amazon.com/Windows-premium-64bit-System-Builder/DP/B004Q0PT3I/ref=sr_1_1?ie=UTF8&QID=1348592929&SR=8-1&keywords=Windows+7+Home+Premium

  One of the comments said that Windows 7 is is only related to the motherboard, if I want to get a couple more opinions.  Thank you!

  Upgrading the hard drive won't be a problem. Simply create a backup of the Image the old drive and restore to the new drive.

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  A step by step guide on the use of Acronis True Image Home 2011.
  http://www.PAGESTART.com/acronisnewharddrive01.html

  How to pass windows 7 hard disk nine or greater using the backup and restore of Windows 7
  http://www.PAGESTART.com/win7bckuprstrnhd072610.html

  How to pass Windows 7 on a larger hard drive
  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  ==============================================

  Change the CPU may require a different motherboard, so if you change just the CPU using the same motherboard, you may need to reactivate over the telephone.

  However a "of System Builder (OEM) version of Windows 7 is related to the first motherboard install you it, so if this CPU upgrade also requires a different motherboard / new then the Integrator version will be more usable (will activate not)."

  ==============================================

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com