Install Windows 7 on the same computer with different drives

Similar Questions

• I have re installed Windows vista on the same computer laptop and now its says product key is already in use.

  I had Windows vista on my laptop after 1 year I had to re install windows, but now its always tells me that the product key is already in use (I use the product key for the same computer laptop I installed previously on).

  Please tell me why this is happening as I am once again the installation on the same laptop.

  Thank you

  I see what is the problem.

  You have a corrupted Licnsing store-

  Please try the steps below to re-create the store with the correct data.

  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.

  You may need to enter your COA key and activate it.
  Once complete, run another report MGADiag and post back with the results

• install two copies of windows oem on the same computer

  Installation of two separate copies of OEM windows 7 on the same computer (an ultimate, a home premium, the two 64 bit) the problem is that I can't hide (do it completely unavailable - mask not only) the first installed OS of each from the second partition (identified as "oem partition") when it is started in the second operating system.

  I would like to do to use the ultimate as a main working OS operating system (be able to load up with various applications, databases of workers etc. etc., that once everything is loaded tends to emphasize the system a little (it does not as effectively as I would like).) I would then use the partition Home premium for latency sensitive things. boot between the two and other work is managed by linux (grub 2)

  the disks are defined as readers of ahci uefi (couple of ssd for boot/apps/pagefile)

  Is it still possible? (even with me having to buy the commercial versions of the os (non - oem), or microsoft is trying to wrest a sort of copy protection scheme

  the two disks (main) are set up as follows
  / dev/sda1 to fat32 (for gpt disks) startup (resized to 500 MB of 128)
  / dev/sda2 unknown ms reserved (this is set here as part of microsofts uefi partitioning installation sequence)
  / dev/sda3 ntfs first installation (7 ultimate) operating system

  dev/sdb1 unknown ms reserved (see above)
  dev/sdb2 ntfs second os install - he actually complains during installation that it cannot install on the partition, but he does it anyway

  Thanks in advance for any help

  I forgot to add the second installed operating system know the partition indicator 'hide '.

  Microsoft has never designed a version of Windows that can hide another version of Windows.  You will need to use a boot improved as Manager:

  http://www.terabyteunlimited.com/BootIt-bare-metal.htm

• If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  Yes, you should be able to reinstall, but if you can you should disable before resetting the machine.  Otherwise, if the two license activations were used and no reset you will need to contact Adobe Support by chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer?

  Packed HARD drive

  If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer? How the product key is affected? He still believes that I am still on the old HDD?

  If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer? How the product key is affected? He still believes that I am still on the old HDD?

  Yes.

  Not at all.

  N °

  If you have Windows 7 with an OEM license agreement (it came pre-installed on the computer is the most likely scenario for this, but you can buy OEM copies so) or you have a license to retail (upgrade or full version) - the way your question is worded is very specific - you * can * install Windows 7 costs/clean on this same system as much as you wish.  A new hard drive won't stop you activation - well that at some point, you need to activate by phone, as opposed to over the Internet.

  Now - if the motherboard is replaced and it's licensed OEM and replacement was not that of the OEM that probably set up your computer...  Then you have a problem.

  Unless you happen to have a license of Windows 7 retail sales, so it is not related to the computer (motherboard).

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How many times can I reinstall windows 7 on the same computer by using a product key?

  OT: Reinstall Windows 7.

  How many times can I reinstall windows 7 on the same computer by using a product key?

  How many times can I reinstall windows 7 on the same computer by using a product key?

  You can reinstall on the same computer as many times as you want.

  Eventually you may need to activate by using the telephone option.

  Concerning

• Download photoshop for free twice on the same computer with a different account?

  Download photoshop for free twice on the same computer with a different account?

  No, you can use the trial only once on a single computer.

  Concerning

  Hervé Khare

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• How many user take RDP at the same time with different user login ID in Server R2 2012

  How many user take RDP at the same time with different user login ID in Server R2 2012?

  How many user take RDP at the same time with different user login ID in Server 2008 R2?

  How many user take RDP at the same time with different user login ID in Server 2012 starndard?

  How many user take RDP at the same time with different user login ID in Server 2008 standard?

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• Flash CS4 can be installed and run on the same computer as Flash CS3?

  I will be able to install Flash CS4 and keep Flash CS3? I can run both at the same time on the same computer?
  
  I have several projects I want to maintain that in Flash CS3 for various reasons. If I have to put in place a separate computer to develop in CS4, I would like to know in advance.
  
  Thanks in advance.

  You should be able to. CS4 install in a separate Directory of CS4. I currently have a system running suite CS3 and Flash 8 and InDesign CS2 web! From time to time, the system is confused between Flash 8 and Flash CS3 to open when you click on a FLA file in Windows Explorer by default. But apart from that, there is no issue.

  I intend to get CS4 and still keep Flash 8 and CS3, simply because I've been working with people around the world who don't bother to upgrade.

• Want 5530: Install 5530 want twice on same PC with different printer profiles

  Running Windows 7 Pro.  I want to install my 5530 printer like the first time with the name of the printer that includes 1 side printed and it default profile 1 side printed.   I would then like to install this same printer a second time, but with a name that indicates 2-sided with his descriptive default on 2 sides.  The first install the Panel very well.  However, the software will let me install a second time.  It stops in the process where I tell it to connect via USB.

  I can install it using the Win7 "Add a printer", but nothing will be printed on it.  It seems to use a port USB, for example USB006, where the printer software creates a "printer virtual port xxxx".

  1. How can I install the 5530 desire a second time on the same PC with this own printer profile?

  2. in the "Devices and printers" Win7, it sort of just "copy" the first instance/profile of the printer to a second instance if I can just change the profile?

  Hello

  Devices and printers, click Add printer and select a local printer.

  Select the LPT1 port, and then click Next.

  Select HP or Hewlett-Packard in the manufacturer list, then the HP Envy 5530 in the printer list, and then complete the wizard.

  Once you have finished, right-click the existing copy of the 5530 (the one created by the HP software) and select printer properties.

  The tab of Ports to take note of the selected channel and close the window.

  Right-click the newly added copy and select printer properties, select the same port as configured for the original printer and press OK.

  You can set each printer as required and name it accordingly.

  Kind regards

  Shlomi

• Resettlement and Vista OEM activation on the same machine with different Hd.

  I have hard disk problems and was wanting to know if I can reinstall Vista OEM with the same key, the system I built a few months ago, which apparently needs a new HD, all the rest is original. I have heard, a person cannot change the motherboard, but the beautiful la belle fille girl to MSoft, told me on the phone I couldn't change anything. Now I'm afraid to buy the necessary hd.

  Thank you

  Any help much appreciated.

  You can change the hard drive and reinstall your OEM licensed Vista on the same computer.

  You may need to reactivate.

  If you have problems with Activation:

  Try this and take the Option phone hang for a real person explain to the:

  http://www.Microsoft.com/Windows/Windows-Vista/quick-start/activation-FAQ.aspx

  FAQ of activation to the. link above

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person. mm

  See you soon.

  Mick Murphy - Microsoft partner

• Branch to the same page with different session variables

  Hello guys,.

  Is there a way that allows to create a branch that redirect to the same page with a different set of values for session variables. Or is it an effective way to add the buttons after that moves through the consecutive records in the pre and oracle apex.

  hope someone can help me.

  Kind regards.

  -shashikahk-

  is there a way to add the following buttons and pre

  If you create a form using the wizard pages, Apex will automatically create these buttons in some cases (as in a master form / retail).

  Create a master page / detail demo so you can see how it works. Apex creates a pre-rendering process:

  Get the value of the primary key next or previous

  Some of the hidden objects, such as Pxx_ROWID_NEXT.

  And two buttons: GET_PREVIOUS_ROWID and GET_NEXT_ROWID

  (if you do not use rowid as the primary key, another name will be generated).