Locations database for 12.1.0.2 models?

Similar Questions

• How to keep the /var/db/locate.database locate to removable disk

  I just ran sudo /usr/libexec/locate.updatedb with two mounted external drives.  I think that when the command is then executed by the weekly update of system, and readers are not mounted, then the data of these drives will be deleted.  I guess I could copy /var/db/locate.database to a file for backup and then use the-d option to locate to search for a file.  But is there a better way to handle this?

  Maybe I should be using mdfind and mdutil to handle this, but I did not understand on external drives for either.

  Thanks for help.

  Boyd

  But is there a better way to handle this?

  Yes. Use a disk cataloging application. I'm sure you can find several in a web search. I don't have a specific recommendation.

• vWorkspace 8.0MR1 Powershell error - cannot locate permission for target

  I installed the version 8.0.306.0029 of the Powershell Module for vWorkspace and I see a problem with the New-QVWManagedApplication cmdlet. I have all the settings according to the wiki for the specified cmdlet, but he came back with the message below pointing to an issue with target. I couldn't find anything in the reference of the cmdlet on the objectives, so I don't know what I'm doing wrong.

  Here is the syntax I used and the result. I tried leaving a number of parameters but the same result.

  New-QVWManagedApplication-name 'Powershell Test' - SessionHost P14TS4-Path 'C:\Program may Explorer\iexplore.exe' - InitialWindowState normal vWorkspace - SeamlessWindowMode-Enabled $True - LoadBalancingSetting - SessionSharingEnabled $True - NotSpecified DisplayName 'Powershell Test' - close "vworkspace database.

  New-QVWManagedApplication: unable to locate permission for target [PN_PERM_TARGET_MANAGED_APPLICATIONS]
  [PN_PERM_ADD_APPS].
  On line: 1 char: 1
  + New-QVWManagedApplication-name P14TS4 - SessionHost "Powershell" Test - path C:\ «...
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: NotSpecified: (:)) [-QVWManagedApplication] new KeyNotFoundException)
  + FullyQualifiedErrorId: System.Collections.Generic.KeyNotFoundException, Quest.vWorkspace.PowerShell.Clients.NewQVWManagedApplicationCommand

  If it helps our environment is 8.0 since the launch with the gateway servers, IIS, management and broker 2012 with 2008R2 Session hosts. I installed PowerShell module on one of management with .net 4.0 and PowerShell 3 servers as required.

  Hello

  Dev did find something interesting in this newspaper.

  If you have access to SQL Management Studio, please access your pnadmin.dmdefinedpermissions and select the top1000 lines.

  If there is only a few permissions, please post a screenshot. Are there hundreds, batch export to CSV and then he will have to find a way to do this to me.

  Thank you, Andrew.

• Schema of database for the processing of the results

  Hi all

  I have a question on the results of teststep registration in the database. I use the generic recordset as my database for the recording of data.

  In my database (SQL Server), there are the following diagrams: dbo, dbtest1, dbtest2. I created all the tables of results (UUT_Result, Step_Result etc...) of the generic Recordset object in all schemas. Therefore, to display the results in the table of Step_Result, I specify the schema as well as the name of the table, for example SELECT * FROM dbtest1. Step_Result.

  Is there a way to tell Teststand to save the result in another schema (dbo, dbtest1, dbtest2) programmatically?

  Yours sincerely,

  chati

  Yes, the tool is easier to visualize what makes SQL. A user can access patterns as much as they have permission for. The problem is that, in order to specify the schema, you must assign the rating on your SQL commands. I don't know of an easy way to do this in Teststand.

  If you manually create the SQL commands is noted:

  [Database]. [Schema]. [Table]

  It is easier to implement multiple user names and to use the default schema to define.

  You can also have a database that is different for each category of journaling (and no need to use patterns at all).

  A lot of good information here:

  https://TechNet.Microsoft.com/en-us/library/dd283095 (v = sql.100) .aspx

• change of database for processing result

  Hello everyone,

  I have a question regarding the change of the use of the database for the processing of the result. My environment is 2014 Teststand, LabView 2014.

  I need to be able to change the database used to store the result data programmatically. I use the simple example of the user interface provided by TestStand as a starting point to build the user interface. As I do this is by creating a global variable of station (StationGlobals.DBName) in the TestStand. The user can select its database via a combo box in the user interface. When users perform a sequence, Teststand asked to the user interface, the name of the database selected by the user (using UIMessage).

  It does not work like I wanted. It is better described the symptom using the following use cases:

  1. start the user interface

  2. choose a database (DB - A)

  3. run a sequence

  4. check the result data tables in DB - A. This works.

  5. choose another database (DB - B)

  6. run the same sequence

  7. check the result data tables in DB - B. They are not DB - B.

  8. check the result data tables in DB - A. They are in DB - A.

  It seems that the global variable of the station can be passed to the configuration database before you start to execute any order. The next event in the sequence, it does not take effect more.

  I wonder if I need to change a reminder to operate correctly.

  No idea why it behaves in this way? Here is a screenshot of my setup of database:

  Thanks in advance for any pointer.

  Yours,

  chati

  

  Hello Warren_Scott,

  apparently in my case, when I change the database between runs, I can simply turn off the option "Share Data Link between executions" in the result of treatment-> database option and it will work. Thanks for your suggestions.

  Yours,

  chati

• How to make a database for an application

  How to make a database for an application. I can create it outside somewhere in my computer and then copy it into the current folder? or is there a standard way?

  Yes you can do it outside if you wish, two programs I've used SQLite Browser and sqlitestudio two do work but sqlitestudio has more features and is the one I now use exclusively.

  There are many others, however, simply search for sqlite application in google.

• Error: "no physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).

  I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)

  "No physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.

  I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)

  Thanks for any help.

  I tried to disable everything in the bios... including the things I needed. No luck

  Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.

• A web application from merger can also run on Smartphones? So what of the database for mobile?

  Mr President.

  A web application from merger can also run on Smartphones? So what of the database for mobile?

  Concerning

  Any web application can run on smart phone because you access this browser so no need of database or application server on your mobile phone

  It's the same access to a Web site on mobile

  If you are talking about the mobile app

  check - http://www.oracle.com/technetwork/developer-tools/adf-mobile/overview/adfmobile-1917693.html

  Ashish

• The use of tables of database for authentication in the ADF

  Hello

  I need to use my user table in the database for authentication in ADF (adf 11.1.2).

  I have 3 categories: agent admin and user is unique, each has its own page, logging, the application checks the type of user and directs its jsf task or the page of the jsf page flow.

  I have a user with the type attribute table

  HOW CAN I MAKE THIS PRAYER.

  Hello

  See links below.

  Whatever Fusion Middleware: Tables database user to implement authentication in the ADF

  Java / Oracle SOA blog: the use of tables of database as in WebLogic authentication provider

• How can I make a database for my site (muse)?

  How can I make a database for my site (muse)?

  locking this post as it seems to be a double post

  How to create a base gives pour my website (muse)?

• Am about to buy DW.  2 quick questions before proceeding.  (1) can I associate a DW created an EXTERNAL SQL Express database for the read/write site?  Can be made safe?  (2) am plans to use Contribute to allow non-technical users to end dry change

  Am about to buy DW.  2 quick questions before proceeding.  (1) can I associate a DW created an EXTERNAL SQL Express database for the read/write site?  Can be made safe?  (2) am plans to use Contribute to allow non-technical end users EASILY change the sections of the web site.  Can this work?  Thank you.

  I would like some ideas.

  A CMS is the standard solution in the industry today. The most common environment is LAMP (LINUX, Apache, MySQL, PHP).

  Some of us to write custom CMS systems for a living. I concentrate on CMS for retirement centers. There are all kinds of solutions CMS available ranging from generalist, off-the-shelf CMS like WordPress, completely custom, with a lot of opportunities in the meantime.

• How to check the growth of the database for a database on ASM?

  Hello
  
  I have been using the following script to check the growth of the database (for DBs on file system):
  

  SELECT b.tsname tablespace_name ,
    MAX(b.used_size_mb) cur_used_size_mb ,
    ROUND(AVG(inc_used_size_mb),2)avg_increas_mb
  FROM
    (SELECT a.days,
      a.tsname ,
      used_size_mb ,
      used_size_mb - LAG (used_size_mb,1) OVER ( PARTITION BY a.tsname ORDER BY a.tsname,a.days) inc_used_size_mb
    FROM
      (SELECT TO_CHAR(sp.begin_interval_time,'MM-DD-YYYY') days ,
        ts.tsname ,
        MAX(ROUND((tsu.tablespace_usedsize* dt.block_size )/(1024*1024),2)) used_size_mb
      FROM dba_hist_tbspc_space_usage tsu ,
        dba_hist_tablespace_stat ts ,
        dba_hist_snapshot sp,
        dba_tablespaces dt
      WHERE tsu.tablespace_id    = ts.ts#
      AND tsu.snap_id            = sp.snap_id
      AND ts.tsname              = dt.tablespace_name
      AND sp.begin_interval_time > sysdate-7
      GROUP BY TO_CHAR(sp.begin_interval_time,'MM-DD-YYYY'),
        ts.tsname
      ORDER BY ts.tsname,
        days
      ) a
    ) b
  GROUP BY b.tsname
  ORDER BY b.tsname;

  And I think that he always gave me good results until I ran this script on a database (10.2.0.5) on ASM.
  
  Is it because the databases on the ASM are maintaied differently, OR do most proabbly there was no activity on this database in the last 7 days? I even ran this query for last 90/180 / day and it is me again after results:
  

  TABLESPACE_NAME                CUR_USED_SIZE_MB AVG_INCREAS_MB
  ------------------------------ ---------------- --------------
  SYSAUX                                   574.38            .36
  SYSTEM                                   514.69              0
  DATA                                    1593.25              0
  IDX                                         .06              0
  UNDOTBS1                                  69.06          -3.84
  USERS                                     96.13              0

  Thanks in advance!

  I have no reason to believe tablespaces under ASM are maintained differently, so the most likely explanation is the change in the activity of the DB.

  What is your AWR retention? The default value is 7 days, so if yours is set to the default value, and then by running the query for 90/180 days you would not give more information.

  If you want to get the output of your scripts, you may need to adjust the AWR retention and your tablespace SYSAUX respectively.

  If the DB is managed by Oracle Enterprise Manager (OEM), you can make tablespace forecast based on the measurements taken by the OEM. I did a presentation on this (NYOUG, VirtaThon) just now:
  http://iiotzov.files.WordPress.com/2011/08/iotzov_oem_repository.PDF
  http://iiotzov.files.WordPress.com/2012/05/OEM-repository-a-second-look.doc

  Lordane Iotzov

• How to check if the database for DRDA gateway is installed and configured.

  Hi all
  
  How can we check if the database for DRDA gateway is installed and configured.
  
  Our operating system is AIX 5 L 64 bit OS.
  RDBMS: 11.2.0.3
  
  Kind regards

  Duplicated
  How to check if the database for DRDA gateway is installed and configured.

  + - locked thread-+.

  Nicolas.

• How to connect to the database for all reports EN

  Hello
  
  I've developed 100 reports in the client of the production, test purpose that I moved
  test client. How can I connect to the database for all reports at once?
  
  Concerning
  Thaer

  Hi Thaer,

  You can connect to the connection of database for all reports through the workspace of HFM.

  Connect to the HFM area--> click--> Explorer, and click Tools--> click Manager of database and respective connections of Production Instance to the Instance of Test required information and that you will be able to connect to the Test database for all reports both change.

  Kind regards
  Srikanth

• How to create the database for setting up connection

  Hello
  I'm trying to pass on the values of the variables from a database instead of the usual .csv file. I need to connect to a database for this. When I try to connect to the Oracle XE (installed with the ATS) he invites me to put in the following:
  
  -SID
  -Service name
  -Alais
  
  I don't know what is the SID or Service name values.
  
  Concerning

  Hello

  -SID: XE
  -Name Service: even
  -Alais: what you want

  You must also put the host name somewhere (you can put localhost)

  JB