Locking the exposure
Hello. I was just curious - is it possible to do a locking the exposure for the T3i when you work in manual mode? Or it works only in shutter/aperture priority? Thank you in advance!
I think that there is no locking the exposure in Manual Mode.
Tags: Canon Camera
Similar Questions
-
Lock the ring forever? IPhone 5 s
On the iphone how can 5, I lock the ringtone on ALWAYS ON and hard for my parents to the old person? It borders always buttons and settings without realizing it.
Sorry, but you can't. There is no way to restrict the parameters of 'sounds' or the switch settings mute / muffler side. Those who can always be changed by anyone who has access to the phone.
You can set the sound settings, so the external hardware buttons does not change the volume, and you can set the key "secret" for her less always vibrates. But these settings themselves are always accessible to anyone who has access to the device.
-
How to lock the v24 FF preference settings?
There are many questions and answers on the way to lock the preferences of FF, but the latest version I've seen discussed is v13! Lockdown procedures apply also to v24 and newer?
I don't see any lockPref in the config file and I am trying Firefox STIG.Thank you
Ray
@Piercerejr, I have answered the question that you have open in 983270/issues/983270 - keep the conversation he...
-
How to LOCK the search bar?
Does anyone know how to lock the search bar so that it does not disappear whenever I press CTRL-F?
Also any ideas on how I can get it to stop auto skin to the top of the page, or at the very least, a "ding", after reaching the bottom of the page?
Thank you
Hello Chaosdruid, This is the correct behavior, ctrl + f to open the search bar, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).
(If you are using an additional theme, place you in default theme.)
If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:
If Firefox is not running, you can start Firefox in Mode safe mode as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
Thank you
-
screen is locked automatically after a certain time of inactivity, but I want to do it manually and instantly, like on your old phone (I think it's menu + * or something).
Hi Quentin,.
To lock the screen, press the power button once.
Please use Firefox OS!
Kind regards
Michelle -
Pages cannot lock the object!
I've been using pages for a while and for some reason, recently, I can't lock or group objects. It is a reference image. The lock is disabled for some reason any.
This looks like an operation to exclude it. Select the remains and in the Layout tab, choose Object Placement under stay on the Page. Now, the lock button become available and actually locks the object.
Pages on OS X 10.11.4 v5.6.1.
-
Is it possible to lock the zoom once you change it?
I have 24 "display. When using Firefox, fullscreen, most of the website pages open with about 5 '' of empty space on each side. It's like I opened a page and it is supposed to fit on a screen 15 ''. I can change the Zoom, but since I can't lock the Zoom, I must do this for each page that I opened. It's more fun seen this big screen and sit 4 feet away.
The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the extension Default FullZoom Level:
https://addons.Mozilla.org/en-us/Firefox/addon/6965Or the NoSquint extension:
https://addons.Mozilla.org/en-us/Firefox/addon/2592/ -
I work for a company users 4000 + and I was tasked to deploy the latest version of Firefox. I need to lock the browser, home page of facility settings, disable auto updates, rename (for example Mozilla Firefox browser provided by companyname). I was able to do with firefox 3.x, but I can't seem to make it work with the version 7.0.1
The greprefs file no longer exists with the change using a ZIP archive omni.jar and you place a local file - settings.js in the defaults\pref instead.
You can use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.
Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.
pref("general.config.filename", "mozilla.cfg"); pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
-
I often switch from photo to video, etc by accident and don't notice it. I would appreciate a confirmation button when switching to avoid this problem. Does anyone else have this problem?
You can't lock the setting.
-
I'm trying to follow this: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
But it fails in the first command "astboot flash gpt.bin partition. I get
target reported max download size of 268435456 bytes
Send "partition" (32 KB)...
GOOD [ s 0.005]
written 'partition '...
(bootloader) Preflash validation failed
FAILED (remote failure)
Finish. total time: 0.142 sLooking around the Web, XDA and this forum, I found this: https://forums.lenovo.com/t5/MOTOROLA-Android-Developer/GUIDE-Osprey-BOOTLOADER-LOCK/td-p/3374644
But even once, when I write "fastboot oem begin lock" I get:
...
(bootloader) Please fully flash version signed before phone is locked!
GOOD [ s 0.022]
Finish. total time: 0.022 sSo I tried to put the ROM, but even once, I get the same errors.
I just want to lock it again. Can someone help me?
Thank you!
Oh! Now I got it!
So, just in case a person is confused, as if I was, here's how. First, find the right ROM. Then go into fastboot.
fastboot oem lock start
You will get the message that has the title "Please full flash version signed before locking the phone" (which should have been obvious I know, but I thought it was an error). However, after that this message that you Flash the ROM as you would. For me it was:
fastboot flash partition gpt.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.99
fastboot flash modem NO - HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdataTo finish the block I did
fastboot oem lock
And that's all!
-
iPod nano 7th gen locking the volume does not.
I set the volume limit lock, but it does not work, I can always change the volume manually even if I locked the volume limit. How to overcome this problem? I really need to set limit volume for my daughter.
I can always change the volume manually
The setting of the limit is the maximum volume. You can always change the volume manually.
-
How to lock the start of a clip to a specific bar
I'm working on a soundtrack to a movie, and like most people do this kind of work, I need to work with different tempos. I started with the clip, I placed so that the visual cue would correspond to 5 1 1 1 bar in my project of logic. Is where the music starts.
Now, I'm experimenting different tempos. Problem is: whenever I have change the tempo of the project, the film desynchronises, which is, I have to manually position the region video on the song from the movie so that my reference corresponds to 5 1 1 1 bar again. It becomes a nightmare since I created different alternatives, each with a different tempo.
I tried to create film markers or markers smpte-locked, and they work very well, because they stick to the time code, not on the bars, so whenever I change the tempo they keep in sync with the film. Remains the major problem remains: the beginning of the clip changes its position, so I have to manually synchronize in the top bar of my song (5 1 1 1).
What I would do is, lock the clip to a specific bar (in my case, 5, 1, 1, 1) so that whenever I change the tempo of the project my visual cue is in harmony with my first bar. Is this possible?
I looked around many forums and found many similar questions, all dating from 8 or 10 years, so it seems that it is something that has been around for some time and did not have a proper fix. Any help is appreciated!
FOUND A SOLUTION!
After digging a bit in the logic of the user manual, I found a solution. I'm posting it so that everyone who has had the same problem can find the answer here!
Under "Project settings", there is a tab called synchronization. There will find you:
Position bar: (1 1 1 1) plays to the SMPTE (00:00:00:00.00)
This is the default, and he said logical that the first bar must synchronize with the first frame of the SMPTE. So I changed it to the following:
Position bar: (5 1 1 1) plays to the SMPTE (01:00:15:11.49).
This is.
-
Problem with re - lock the bootloader
Hi can you please help me with the problem re - lock?
A summary of what has past.
After kitkat 4.4.3 GPS upgrade (from 4.4.2) stopped working, tried everything: reboot, airplane mode, clear the cache, factory reset, etc...) After these procedure, something bad happened and I was not able to start my Moto X, in the boot animation, it stops.
The search in the forum much, the only solution was unlock bootloader and RDS (fastboot) 4.4.2 - Brazil to the detail of the Motorola site.
After this Moto X was alive, but GPS still does not work, it detects the satellites, but their power level increases not (test GPS or GPS status app), when you change the precision, he complains that GPS should be on (but it's on).
So I wanted to send it to repair, because it seems question HW.
Now, I tried to re - lock the bootloader (according to the procedure of re - lock of motorola) but in the first command, I get the following message:
Explanation of the risks of unlocking the bootloader can be accessed hereand the terms legal can be found here.
In legal terms, he said, "the user understands and acknowledges that, because it can be difficult or impossible to know if or ohow a device has changed once its unlock code has been delivered to the user, Motorola disclaims any responsibility for any use of a device either, once he provided the unlock code for the device.»
Maybe someone here in the developer community can offer advice or suggestions... in the meantime, have you tried the convenience store?
-
My (waterproofed) ipod nano 4th generation has of worked until today, when after loading all the buttons are "locked" - when I turn it on I get the green light for a few seconds and then it flashes orange 3 times. He plays at a very low volume and none of the keys work. I tried to reset - no effect and restoring the factory settings nothing works. I guess that it is a software issue as it was working fine until I rebooted it today. If anyone has a solution I would be happy to hear about.
There is a locking button on the gen shuffle function 4. To lock the keys, press and hold the Play/Pause button for three seconds. The light flashes three times when it is locked. To unlock, do the same thing.
However, if you did a restore on the shuffle using iTunes, it would be completely reset, so it should not matter if the buttons were previously locked.
-
Hello. Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch. It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored. Thank you.
Hello
You can enable the detection of wrist as well as an access code and unlock it with the iPhone:
- On your iPhone, in the application of the watch, go to: My Watch (low left tab) > General > wrist Detection - this turns on.
- On your iPhone, in the application of the watch, go to: Watch My > Passcode > Passcode turn on (choose a Simple 4 digit access code or a longer).
- Also in the password settings screen, select Unlock with iPhone.
After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually or unlock your iPhone. Then, it will remain unlocked until you delete the monitoring of your wrist, when that it locks automatically.
You can also set your watch to the screen to reactivate automatically when you lift your wrist, even select what is displayed on the screen to wake up:
- On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
- Active screen Wake on revival of wrist, and;
- Choose if the watch should resume last activity or see the Face of the watch.
Maybe you are looking for
-
FF 38.0.1: what's on: drive and how to disable?
Just spent FF FF 38.0.1 37.0.2 and now on the right side of the location bar, there is a small icon on the page that opens the so-called topic: Reader. She only gives a very LARGE with large page for example Google, but for most of the pages it gives
-
How to bring back these important features? as far as I know firefox doesn't have to improve as I watched.
-
I installed an HP Photosmart C6280 all-in-One on a macbook pro with the Mountain Lion. The installation says it succeeded, but when I try to print I get a message indicating that the printer has not been installed correctly. It has an option to repai
-
ISATAP adapter is not working properly code 31
I have a Sony Vaio equipped of Vista Home Premium. Today, I noticed an asterisk on one of my devices, he said that Microsoft ISATAP Adapter is not working properly because Windows cannot load the drivers required for this device (Code 31). What is I
-
Curve of soaked blackBerry Smartphones and does not work - what can I do with it now?
I went swimming with my curve in my pocket, and naturally, he is now dead. What can I do with it? send somewhere for refurb? and no, I didn't have insurance, so please don't rub it!