Log deactivation?

Similar Questions

• How can I get the error "Unable to start the service" on attempts to run administrative tools (including the Services application) when logged in as an administrator?

  A large number of menu selections is affected, including the 'computer management', 'Event Viewer', 'Services' and 'System Configuration'.
   
  I tried to clean a computer that was thus invaded by unwanted applications and the services that it was unusable.  I applied several sets of Windows updates until it has been fairly stable, then lightened through the Services application services, changing many services 'automatic' to 'enabled' or 'disabled '.  I suspect that some service necessary for the performance of the foregoing has been inadvertently stopped.  (None that he was '' strongly recommended '' or '' recommended '' do not turn off or the description seemed to make a requirement, but...)  I don't know how to confirm this theory, identify the missing service or reactivate a service without the Services application.

  I got lucky.  I called a local, independent computer store.  Their support staff (after confirming that I had an appropriate Windows license) told me that if the computer came with a disk for Installation of Windows Vista, there is probably a partition to start installation on the hard disk, I could get to with a special touch at the beginning of the start-up phase of the BIOS.  It flashed by so quickly that I missed my chance, so I put off the power while trying to boot Windows.  On my next attempt, I missed again (even if I managed to spot the key combination - F11).  But when he arrived at the start-up phase of Windows, he offered me a chance to run the system restore which was banned when I was logged in with an administrator account.  I had to go back a ways, but I found one who would start and was able to complete cleaning of the machine and make it to a usable state.
   
  Thanks to all who responded.
   
  Oh, and it seems (according to my conversation with the service of the local computer store) that my fatal mistake was by disabling the service allowing you to promote its own security.  Apparently an administrator account is not the rights needed to perform most administrative functions without it; If disabling the service gets you into a nearly unrecoverable state.  A hint of that in the description of the service, or even a total ban on deactivation, would be a good idea.
   
  -Kevin

• Background process untraceable on the event log service

  Hello

  I use a Windows 7 Enterprise system,

  ASUS X 99

  I7-5960 X

  GTX Titan

  This is a whole new system.

  Recently, the spinning wheel "working in the shadows" near the cursor doesn't disappear. I mean he will start a few seconds after the start and just stay there. It drove me crazy so I had to understand. I spent hours on the internet has tried many things. I have a little shrunken down, but still no solution. Here are some of the things I've done:

  (1) I went to Task Manager. I noticed that there is a constant use of the CPU by about 7% at all times. It is abnormal because idling all my other computers are still 0-1%. I went to the tab process to see what that was doing this. This is when things started to get interesting. There was no process using so much CPU. The system idle process will be 98-99%, but the CPU usage would be even at 7-8%.

  (2) I read on the internet a program called Explorer of progress, so I downloaded to see if it could track down. It's even more bizarre. The process exploring the use of the processor has 1-2%, as it should; While the Task Manager, it was still 7-8%!

  (3) many people suggested that this kind of thing can be linked to an infection by the virus. So I ran scans with Norton trial we had (also in safe mode), nothing. Then, I uninstalled, installed Malwarebytes, scanned and found nothing.

  (4) I checked the driver updates. I also completely uninstalled and reinstalled the graphics and USB drivers. No luck.

  (5) then, I did a clean boot (most of the services have been disabled) and voila! It was fine. So, he had to be linked to one of background services.

  (6) after a long trial and error, I reduced to a single service: Windows event log. The problem would not happen if I disabled this service of msconfig, then rebooted. However, I googled this service and it turns out that it's something quite essential for the operating system and I should not turn it off.

  So now, I hit a wall. I have absolutely no idea what to do (I'm considering an update of the BIOS but doubt strongly it would be useful). Before ask you, I don't know what preceded the problem. Many people use this computer and I don't know who started it. A clean installation of Windows is an option, but it would be a large number of deactivation/activation of the software is the last resort.

  I would appreciate help.

  Thank you.

  NO.

  You/we can be able to obtain more information by running a trace of performance windows recorder.  Instructions in the wiki below

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• Why! Why!... I bought for 1900 PLN! Cs6 ver.13 box ESD Photshop and :/ I can't after a an instalation and deactivation on an installed on another laptop and my laptop because

  Why! Why!... I bought for 1900 PLN! Cs6 ver.13 box ESD Photshop and :/ I can't after a an instalation and deactivation on a laptop I'cant instal on another and my computer laptop because its said that series is used on 2 computers and and Desact. new attempt does not work even after I try again clik try again... try again...!

  Contact Adobe technical support via chat and ask them to reset your activations (not available on weekends)

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• CC doesn't keep saying im logged in too many computers, how can I disable the Win Vista?

  For starters, I have Win7 and Vista machine.  I installed CC at a time.  The Vista machine is mostly dead so I disabled everything on it.  We got a new machine of Win8 and I redownloaded CC to that.  Now everytime I open a program from Adobe on the machines of 7 or 8, Im always told Im logged on more than 2 computers already with the option to save out of machines now or try again.  I said to disconnect each machine and then I can get it.  but when I open a program on the other machine, I get the same thing.  So I tell myself that I have not properly disabled Vista machine somehow, or 'turn it off from all the machines' is not actually turning off vista and not really know what else to do.  How to do everything the machine Vista completely?  He works, for the most part, so any changes I have to do, I should be able to do

  Hi kellyjaye1,

  Please see the Ko: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

  Kind regards

  Romit Sinha

• Activation/deactivation

  I have two desktops and two laptops. I will install CC on two desktop computers for now, but when we travel I need to disable desktop computers and turn on laptop computers. I have installed PS CC and expected to find a "disable" in the Help menu entry, but it is not a (although I searched and found another discussion that indicates that there is). It then occurred to me that it was more logical that you would like to toggle through the App Manager, but I see no way to do it.

  How to handle this? There will be moments where I want in any combination of two of the four active both machines. I saw advice installation on a third computer would automatically turn off the first two, but that seems not only gross, that it would not help me at all if I wanted to only one of the two first disabled.

  Thank you.

  Aikane, you will find information on how to log activation, deactivation. Sign in, sign out | Adobe products - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

• How to disable the logging-alm? (disable alm.log)

  I'm runinng PS CS4 on Win XP.

  I was wondering why he was constantly high hard disk activity when PS CS4 is running. Sounds click, click, click all the time...

  I used sysinternals filemon to see what is happening here.

  I figured out that PS CS4 wrote permanently in a file named "alm.log" (c:\documents and settings\[username]\local\temp\alm.log).

  The beginning of the alm.log contains information (useful), but after a while PS CS4 wrote the following text in it:

  2009-09-11 09:29:15 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:15 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:15 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:15 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:16 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:16 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:17 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:17 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:17 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:17 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:18 [2860] ALM: _info_: disabling menu is activated
  2009-09-11 09:29:18 [2860] ALM: _info_: disabling menu is activated

  As you can see that it happens several times per second! Man, this really lame! Click, click, click

  How can I disable this?

  The only way I found out so far is to delete the entire folder c:\documents and settings\ [username] \local\temp\ before starting the PS CS4. When this path does not exist, PS CS4 does not alm.log and it seems that it isn't still trying to connect to something. It doesn't seem to bother PS CS4 that there is no alm.log and he seems to have no disadvantage of having no alm.log.

  Unfortunately, the temporary path is restored (I think by Windows?) each time the computer is restarted.

  The solution may be to use a startup script file to remove the path each time the system starts, but I'd be happy to find a better way...

  That means ist: "menu of deactivation is activated?

  mike_213 wrote:

  I was wondering why he was constantly high hard disk activity when PS CS4 is running. Sounds click, click, click all the time...

  I hope for your sake that he doesn't look like click click click, because it means that the hard drive is dying

• With kernel panic issues please help reading log files

  Whenever I plug a peripheral usb Arduino my mac crashes. Here is the log. I can't understand.

  _________________________

  Anonymous UUID: F337CFF1-4204-DF6D-2BD0-B6FDF3953966

  Mon 3 Oct 11:30:17 2016

  Panic report *.

  panic (the appellant 2 cpu 0xffffff801554186b): 'item 0xffffff9202993dee of vm area objects being released taken wrongly zone kalloc.16\n"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3789.1.32/osfmk/kern /zalloc.c:2664 '.

  Backtrace (2 CPU), Frame: Return address

  0xffffff9202823ba0: 0xffffff80154f748c

  0xffffff9202823c20: 0xffffff801554186b

  0xffffff9202823d00: 0xffffff8015a86fe6

  0xffffff9202823d20: 0xffffff7f9643d00a

  0xffffff9202823d70: 0xffffff7f9639600a

  0xffffff9202823d90: 0xffffff7f9639bf9d

  0xffffff9202823e10: 0xffffff8015ac00ba

  0xffffff9202823e80: 0xffffff7f9639b8dd

  0xffffff9202823ed0: 0xffffff7f963a07e1

  0xffffff9202823f10: 0xffffff7f963a053f

  0xffffff9202823f30: 0xffffff8015abd621

  0xffffff9202823f80: 0xffffff8015abcc06

  0xffffff9202823fb0: 0xffffff80154a6af7

  Extensions of core in backtrace:

  com.apple.iokit.IOUSBHostFamily (1.1) [6A671CD8-5527-3A10-8675-1421D158D7A7] @ ffff7f96365000-> 0xffffff7f963ccfff 0xff

  dependency: com.apple.driver.AppleBusPowerController (1.0) [DB526B45 - 1 A 45 - 3A 81 - A0C1-57F826CAD EDF]@0xffffff7f96358000]

  com.apple.iokit.IOUSBFamily (900.4.1) [8F6207EC-608D-373A-B35E-E6578202F58D] @ ffff7f96409000-> 0xffffff7f964a1fff 0xff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [731443D8-78D5-30C8-939A-1ED3E857CA22] @ 7f95d32000 0xffffff

  dependency: ffff7f96365000 @0xff com.apple.iokit.IOUSBHostFamily (1.1) [6A671CD8-5527-3A10-8675-1421D158D7A7]

  Corresponding to the current thread BSD process name: kernel_task

  Boot args: kext-dev-mode = 1

  Mac OS version:

  A 16, 323

  Kernel version:

  16.0.0 Darwin kernel version: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64

  Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD

  Slide kernel: 0 x 0000000015200000

  Text of core base: 0xffffff8015400000

  Text __HIB base: 0xffffff8015300000

  Name of system model: MacBookPro11, 5 (Mac-06F11F11946D27C5)

  Availability of the system in nanoseconds: 5562983687

  last load kext to 5127051852: com.apple.driver.ApplePlatformEnabler 2.7.0d0 (addr 0xffffff7f97b15000 size 28672)

  kexts responsible:

  com WCH.usbserial 1

  com Kaspersky.NKE 2.3.1a8

  com Kaspersky.kext.Klif 3.4.2a30

  com.apple.driver.ApplePlatformEnabler 2.7.0d0

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.13.60

  com.apple.driver.AppleHDAHardwareConfigDriver 276.26

  com.apple.driver.AppleUpstreamUserClient 3.6.4

  com.apple.driver.AppleHDA 276.26

  com.apple.kext.AMDFramebuffer 1.4.4

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleIntelHD5000Graphics 10.1.8

  com.apple.iokit.IOBluetoothSerialManager 5.0.0f18

  com.apple.AMDRadeonX4000 1.4.4

  com.apple.driver.AppleCameraInterface 5.57.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 5.0.0f18

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleMuxControl 3.13.60

  com.apple.kext.AMD7000Controller 1.4.4

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleIntelFramebufferAzul 10.1.8

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleBacklight 170.9.10

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.iokit.SCSITaskUserClient 394

  com.apple.driver.AppleUSBStorageCoexistentDriver 404.1.1

  com.apple.driver.AppleUSBCardReader 404.1.1

  com.apple.driver.AppleTopCaseHIDEventDriver 102

  com.apple.driver.AppleUSBTopCaseDriver 102

  com.apple.iokit.IOBluetoothUSBDFU 5.0.0f18

  com.apple.driver.CoreStorageFsck 540

  com.apple.iokit.IOAHCIBlockStorage 295.1.1

  com.apple.driver.AirPort.Brcm4360 1100.37.1a16

  com.apple.driver.AppleAHCIPort 326

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 39

  com Apple.filesystems.HFS.kext 366.1.1

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 5.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 5.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 171

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.DspFuncLib 276.26

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOSurface 152

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 5.0.0f18

  com.apple.iokit.IOBluetoothHostControllerTransport 5.0.0f18

  com.apple.iokit.IOBluetoothFamily 5.0.0f18

  com.apple.driver.AppleHDAController 276.26

  com.apple.iokit.IOHDAFamily 276.26

  com.apple.iokit.IOAudioFamily 205.11

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.IOPlatformPluginFamily 6.0.0d8

  com.apple.driver.AppleGraphicsControl 3.13.60

  com.apple.kext.AMDSupport 1.4.4

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.driver.AppleThunderboltDPOutAdapter 4.5.3

  com.apple.AppleGraphicsDeviceControl 3.13.60

  com.apple.iokit.IOAcceleratorFamily2 288.13

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOUSBMassStorageClass 4.0.4

  com.apple.iokit.IOSCSIBlockCommandsDevice 394

  com.apple.iokit.IOUSBMassStorageDriver 131.1.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 394

  com.apple.driver.AppleHIDKeyboard 197

  com.apple.driver.AppleMultitouchDriver 367,6

  com.apple.driver.AppleInputDeviceSupport 76.1

  com.apple.driver.usb.IOUSBHostHIDDevice 1.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.1

  com.apple.driver.CoreStorage 540

  com.apple.driver.AppleXsanScheme 3

  com.apple.iokit.IO80211Family 1200.12.2

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.driver.usb.AppleUSBXHCIPCI 1.1

  com.apple.driver.usb.AppleUSBXHCI 1.1

  com.apple.iokit.IOAHCIFamily 288

  com Apple.filesystems.HFS.Encodings.kext 1

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.driver.AppleThunderboltDPInAdapter 4.5.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.5.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.3

  com.apple.driver.AppleThunderboltNHI 4.1.3

  com.apple.iokit.IOThunderboltFamily 6.2.1

  com.apple.driver.usb.AppleUSBHostPacketFilter 1.0

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.1

  com.apple.driver.AppleUSBHostMergeProperties 1.1

  com.apple.driver.AppleBusPowerController 1.0

  com.apple.driver.AppleEFINVRAM 2.1

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 444

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 5.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 152), Broadcom BCM43xx 1.0 (7.21.171.10.1a16)

  Bluetooth: Version 5.0.0f18, 3 services, 17 machines, 1 incoming serial ports

  Bus crush: MacBook Pro, Apple Inc., 27.1

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533642465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533642465238412D50422020

  USB device: USB 3.0 Bus

  USB Device: Card reader

  USB device: Apple keyboard / Trackpad

  USB Device: USB Bluetooth host controller

  Serial ATA Device: APPLE SM0512G, GB 500,28 SSD

  Model: MacBookPro11, 5, MBP114.0172.B09 of BootROM, 4 processors, Intel Core i7, 2.5 GHz, 16 GB, MSC 2.30f2

  Network service: Wi - Fi, AirPort, en0

  Graphics card: AMD Radeon M370X, AMD Radeon M370X, PCIe, 2048 MB R9 R9

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Uninstall Kapersky. His tendency to interfere with the operation of the computer while offering little or no benefit.

  Uninstall Kapersky

• How was that I logging into your account?

  Hey! What is the * current? Why when I open the Apple support site I see these:

  What is going on? How was that I logging into your account? Is I hacked or what? Or it's matter of Apple? Help, please.

  < image edited by host to remove personal information >

  I've been there before. I came to this site and I was instantly connected as someone who recently signed. Someone helped me to produce a report to Apple.

• 5.2 Server postfix logging is more to /var/log/mail.log

  I would like to know if anyone else has this problem?

  After update macOS Sierra and Server 5.2, I get no message Postfix in /var/log/mail.log (aka SMTP Log).  I've never had a problem to see messages from postfix here before.  I defining all postfix mail log "info".

  I do not process messages greylisting Policy logging /var/log/mail.log.  Thus, the file seems to work in general.  But, no tricks postfix.

  Does anyone else have this problem?

  Same here, tried changing in debugging without result. Tried to change with the Terminal using serveradmin settings messaging or (I know you shouldn't do) editing the main.cf, also changed the com.apple.mail in the directory/etc/asl of notices info or debug nada!

  so, if anyone finds the solution? Please share

• IPhone 7 call log missing

  Hi, I noticed for the upgrade of iphone6 that now when I get a missed call that does not appear in the call logging so I have no idea its been missed. How can I get this working again?

  Hi there, ste_richards!

  Thank you for joining the communities Support from Apple! It seems that you are having problems with the app phone on your iPhone. I know how it is important to be sure you see what calls are missed at any time. First of all, don't forget when you look in the phone application when you are in the log of recent calls, choose ' All'. Then, check out this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone, then the general and reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords ready for iPhone upward starting.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Deleted process (agent cache_delete) producing an excessive logging

  I noticed on the Sierra that the demon of "deleted" system process produces about 500 messages in the syslog every second. Everyone knows this?

  The Console application uses a lot of CPU catching incoming messages. The launchd file is

  / System/Library/LaunchAgents/com. Apple.cache_delete.plist

  The process is

  /System/Library/PrivateFrameworks/CacheDelete.framework/deleted

  There are entries without end like this:

  by default, 22:16:00.029080 + 0100 deleted ENTRY, operation: CACHE_DELETE_PURGEABLE_OPERATION, serviceID: private >: < private info > com.apple.cache_delete demon

  by default, 22:16:00.029537 + 0100 deleted cache update for the service: private >, volume: private >, rises: private > com.apple.cache_delete demon

  default 22:16:00.029614 + 0100 deleted the amount of service information update: 0, serviceID: private >, volume: private >, emergency: 3 pushed: FALSE com.apple.cache_delete demon

  by default 22:16:00.030460 + 0100 deleted < private >: demon of com.apple.cache_delete for the end reminder

  default 22:16:00.030646 + 0100 sendNotification removed: FALSE com.apple.cache_delete demon

  by default, 22:16:00.030569 + 0100 deleted connection < private > demon of com.apple.cache_delete

  by default 22:16:00.037179 + 0100 deleted < private >: demon of com.apple.cache_delete for the end reminder

  by default, 22:16:00.038755 + 0100 deleted connection < private > demon of com.apple.cache_delete

  by default, 22:16:00.039119 + deleted 0100 finished calling plugIn beginUsing: for the NEST: 454

  by default 22:16:00.044106 + 0100 deleted < private >: ask successfully com.apple.cache_delete demon

  default 22:16:00.044272 + deleted 0100 < private > connection has been invalidated.    com Apple.cache_delete demon

  default 22:16:00.044411 + deleted 0100 < private > connection has been invalidated.    com Apple.cache_delete demon

  by default, 22:16:00.044539 + deleted 0100 shoot request for extension for the 454 pid

  by default 22:16:00.044783 + 0100 deleted < private > took 0,029310 seconds, returned: private > demon of com.apple.cache_delete

  by default 22:16:00.044966 + 0100 deleted < private >: < private updateInfo > demon of com.apple.cache_delete

  by default, 22:16:00.045105 + 0100 deleted ENTRY, operation: CACHE_DELETE_PURGEABLE_OPERATION, serviceID: private >: < private info > com.apple.cache_delete demon

  Solved the problem.

  Just delete ~/Library/Caches folder from another account and logged in.

• We went to MacOS Sierra of El Capitan and now have to log in twice, when we start the computer.

  We have upgraded to Mac OS Sierra of El Capitan, and now we have to log in twice, when we start the computer.

  How fix us this?

  Thank you...

  All the best...

  God bless...

  If you have activated the preferences-> Security-> FileVault system, then you must enter your password initially so that device drivers can decrypt your encrypted drive.  Once the system is running, you must then log into your account.

  They are really 2 separate activities that happen just to use the same password.

• I have 10 devices all under the same identity of apple my partner can see all my contacts, call logs and use of all other web internet devices. How can I change this, to keep my contacts and call log on my phone only?

  I have 10 devices all under the same identity of apple my partner can view all my contacts and call logs and vice versa.

  The device can also see all internet pages use the devices, but mine isn't... How to get our contacts and call the newspapers private their own device and how can I get to keep an eye on web pages using my children? So how do for my phone, the master device / hand who is in control of access for all, because it has my info from apple id and card credit on all devices.

  Stop sharing an ID first. They are not meant to be shared. Then set the sharing of family. Each individual should have their own code.

• Sierra - changes to files, Log and the impact to Time Machine

  Hello

  Updated for Sierra and have a minor but very annoying problem. I hope someone can help.

  In the Sierra before the SYSLOG command would print the system from the Console log. Time Machine executions have been recorded there. With a simple command-line grep "iMac com.apple.backupd" I could find all the Time Machine backups and see backup times and pass/fail status, when an error has occurred, the error type.

  Monitor the status of backup is critical for me.

  In the Sierra, the log files are completely different. I can't find where time machine stores its entries or what these entries look like.

  Anyone know how Sierra I accomplish the above? In a log file or elsewhere?

  Thank you

  Al

  See the response I posted here:

  http://superuser.com/questions/1126990/how-to-view-time-machine-log-in-MacOS-Sie rra/1127145 #1127145