Logging correctable ECC reached - limit State

Similar Questions

• HP Photosmart 375 - Cycles with error messages, never reached 'ON' State

  My Photosmart 375 have not used in a while, usually during holidays to print family photos to send them home with relatives.

  This time, when I tried to power the 375, the led 'ON' never became green. Opportunities of couple I saw him turn amber. During this cycling process, I saw several error codes, but have not been able to find a reference to what they actually mean.

  'D 881 0958', '89010AAE', '8A272F28' and '0001027D '.

  I tried to connect the printer to the computer desktop, but given that the 375 never reaches the State 'on', it does not connect to the desktop. I went ahead a purchased as a new print cartridge, but I got the same results as before.

  I appreciate any help in getting this resolved, since I like the printer and won't declare his time of death again.

  Thanks, Mike

  The error codes you get point to a fatal mistake in the firmware of the printer. You can try to do a hard reset to clear the error. If this does not work, you will need to replace the printer.

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Correctable ECC should not flag DIMM Inoperable or gradient CSCuw44595

  Correctable ECC should not flag DIMM Inoperable or degraded: CSCuw44595

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCuw44595/?reffering_site...

  TAC engineer claims that the infrastructure AND blades must be migrated to 2.2.7 for this problem!

  Q. is it true, or just to have some infrastructure to 2.2.7?

  Walter,

  Your engineer is correct. You need to upgrade the two blade & infrastructure. Please read the following:

  http://www.Cisco.com/c/dam/en/us/products/collateral/servers-unified-com...

  "Note: for this change to be effective, both the infrastructure including UCS Manager UCS firmware and the firmware of the host should be at UCSM 2.2 (7), 3.1 (1), or newer.

  -AJ (TACS Cisco)

• How can I make button limit state when I click it? Help please

  Hi guys, I am new to writing code

  now I want to make macarons limit state until I click on another button, I made a menu drop-down

  Here is my code:

  concept1btn. Visible = false;

  concept2btn. Visible = false;

  concept3btn. Visible = false;

  concept4btn. Visible = false;

  concept5btn. Visible = false;

  concept6btn. Visible = false;

  this.addEventListener (MouseEvent.MOUSE_OVER, drop);

  this.addEventListener (MouseEvent.MOUSE_OUT, up);

  this.addEventListener (MouseEvent.MOUSE_DOWN, down);

  function drop(e:MouseEvent) { }

  
  

  concept1btn. Visible = true;

  concept2btn. Visible = true;

  concept3btn. Visible = true;

  concept4btn. Visible = true;

  concept5btn. Visible = true;

  concept6btn. Visible = true;

  }

  function up(e:MouseEvent) { }

  concept1btn. Visible = false;

  concept2btn. Visible = false;

  concept3btn. Visible = false;

  concept4btn. Visible = false;

  concept5btn. Visible = false;

  concept6btn. Visible = false;

  }

  function down(e:MouseEvent) { }

  concept1btn.upState = concept1btn.downState;

  concept1btn.overState = concept1btn.downState;

  What else should I add?

  }

  If you use the button symbol then you don't really have control over the State of the button. Which is controlled by the button symbol itself, the top, the more States out of service are built. In order to get "Lock" buttons, you will need to use a movieClip instead of a button and then use Actionscript to change how the button looks like the user. There are two ways to achieve this. Here is a link to a few different ways to do this that I wrote a few years "there are: Flash buttons lock "

  I hope this helps.

• How to re-enable the alert "maximum event log size is reached" Pop up

  How dose you reactivate the alert pop-up that appears when the event log is full? I used to get a popup alert informing me that the newspaper had reached its maximum. size is specified in Console of Managment computer that allows me to save and clear the log. Now, the log file fills up without notice.

  This can be solved by using a combination of the Microsoft KB articles.

  1. use the "Circumvention" of MSKB843021 (http://support.microsoft.com/kb/843021/en-us)

  2. use registry edit of MSKB243625 (http://support.microsoft.com/kb/243625/en-us

  Although these two KB articles are for different versions of Microsoft Windows Desktop operating systems

  Return WXP SP2 and W2k, I tested successfully on a computer that is running Windows XP SP3 home edition in a VMware Workstation7 environment.

• Limit State

  Hey,.

  is it possible to improve the status limit of 20 in Flash Catalyst?

  Best regards

  Lol that is a strict limit. The only solution in Flash Catalyst is to nest your elements within other components (each component can have 20 States). In Flash Builder, you can code in addition to limit (or convert your drawing in a programming model).

  Chris

• 20... best limit State practice for CF 5.5

  After reading last messages, I am aware of the limit of 20 State within the app. That said, there is such a thing as the 'best practice' to increase the number of States? With the help of Flash Pro is not an option. Thanks and much appreciated.

  You have to look at grouping that you design in custom components to get around the limit of 20 State, or you may have to introduce the actual code to the Flash Builder project.

  Chris

• SQL log file grows to limit, but it can be narrowed and used space is listed as 1%.

  Hello.

  3 guests ESXi 5.1.0 1463097 in a cluster.

  MS SQL 2008 R2 server (SQL Server 10.50.2500) on a Standard VM MS Windows 2008 R2 server.

  VIM_SQLEXP instance name

  Name of the comic: VIM_VCDB.

  Recovery mode: Simple

  DB 1 MB, unrestricted growth. Current database size: 3887MB

  Log growth of 10%, limited to 4 GB maximum size after shrink this morning BUT 2MB

  Every morning the logfile has run nearly full but the VMware VirtualCenter Server service runs and I can start the vSphere Client. I know not if I do not shrink the log, the service will stop later today or tomorrow.

  I studied and followed

  Determine where growth occurs in the VMware vCenter Server (1028356) database.

  SQL Server recovery mode affect the Transaction log space required (1001046)

  Troubleshooting of transaction logs on a Microsoft SQL database server (1003980)

  but I do not see any table more than many. I see that VPX_EVENT has increased about 28 MB at night, but nothing else seems alarming.

  Any ideas what it could be?

  Best regards

  Peter Lageri Rasch

  Denmark

  Hello

  Some time ago I had a similar situation as you.

  I recommend you to check this carefully, it might be useful:

  Troubleshooting when the vcenter db transaction log is full (MS SQL server 2005 express)

  Best regards

  Pablo

• XP, re - install works but can not reach active state

  Hello. I have two computers - 1 desktop and 1 laptop with genuine COA for Windows XP and Windows XP Home Edition. They run Ubuntu Linux for the last year or two, but now I want to reload XP on them. However, the WGA download does not work and now the key associated with the laptop is "invalid". Anyone can shed light on what do I do here?

  You need to install from the original installation media provided with each computer. Key codes work with specific versions and are not interhangeable... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Activation reached limit

  Hello

  Here's my problem, I changed my computer and reinstalled my software first element 11 and photoshop elements 11 on this one.

  I have to disconnect the licenses on my old computer but I don't have access to this topic (the hard drive is broken).

  How can I do?

  Thank you for your help.

  Hi Nicolas, you can try to activate now on the new machine. You should not have more problems during Activation.

• Log / Trace results from Scripts that are run with Run (@) statement.

  Hello

  Oracle10g (R1)

  I used to run large number of scripts to a user of single script file execute statement i.e. "SQL > @/ path/script_file_name.sql '.
  But I can't trace on how statements executed successfully and how much get failed.
  Is there anyway I can / trace log the execution of all statements in this case?

  Thank you

  Hello

  As others have said, you can create a master script like the example below:

  WHENEVER OSERROR EXIT 1;
  WHENEVER SQLERROR EXIT 1;
  SET ECHO ON
  SET DEFINE OFF
  SET FEEDBACK ON
  SET TIME ON
  SPOOL ScriptMaster.log
  @script1.sql
  @script2.sql
  @script3.sql
  @script4.sql
  spool off
  quit;
  

  See you soon

  Legatti

• Activation limit reached for adobe photoshop elements

  I get the error 'Reached limit of Activation for Adobe Photoshop Elements'

  I went through 2 hard drives on the same computer.  I can't disable my install previous, because operating systems it had installed no longer exist.  2 hard drive crashes.  How can I disable my old computers when they no longer exist?

  You need to contact Adobe technical support by chat or phone.  They manage the deactivation (s).  Here is a link that you can use to connect with the cat.

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• SIZE OF THE REDO LOG FILE

  
  Hello

  I got an error message when I add me new group. log files I searched and found the answer on the form. Ago 4 M minimum size of 11 g R2 log file size.

  My question is why a log file size depends on DB_BLOCK_SIZE? This parameter is set to the component structures of memory that create an instance when a log file is an operating system file that depend on the version of the OS not DB_BLOCK_SIZE.

  Thank you.

  
  SQL > alter database add logfile group 4 'c:\app\asif\oradata\employee\redo04.log' size 1 m;
  alter database add logfile group 4 'c:\app\asif\oradata\employee\redo04.log' size 1 m
  *
  ERROR on line 1:
  ORA-00336: 2048 blocks the size of the log file is minimum lower than 8192 blocks

  
  SQL > show parameter db_block_size

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  Whole DB_BLOCK_SIZE 8192
  SQL >

  You are assuming that the redo log block size is the same as the database block size. This is not correct.

  The error indicates that 8192 is the minimum number of blocks of a redo log file. The documentation states that the minimum size is 4 M. For example, you can deduct your redo log block size is 512 bytes.

  Here's some more information about the size of redo log, the documentation block.

  Unlike the database block size, which can always be between 2 K and 32 K, redo log default files to a block size that is equal to the size of physical sector of the disk. Historically, it is usually 512 bytes (512 b).

  Some new large disks offer 4K sizes byte (4K) to increase sector efficiency improved format and ECC capabilities. Most of the Oracle database platforms are able to detect this bigger sector size. The database then automatically creates files redo log with a block size of 4 K of these discs.

• Scripts CPL to limit simultaneous users

  I want to configure a CPL script that will limit the number of concurrent users, based on the records in the Zone.

  Someone has it before completed or is it an example of script that I need to write

  Hi Peter,.

  If I understand correctly, you must limit the number of simultaneous calls in VCS and you intend to do by using the cpl is my understanding correct?

  If so, unfortunately, as I mentioned before in another thread, VCS provides no mechanism for counting the number of active calls and then to limit the calls after reaching a certain value. You need something out of the box to get your need, maybe a policy server custom call external, as I suggested in the other thread, will actually take a peek:

  https://supportforums.Cisco.com/message/4010381#4010381

  I see you really need to have a few VCS feature that allows to limit the number of concurrent calls, maybe something applied to a particular rule of subarea or research. As VCS does not provide this feature at the moment, I suggest you go ahead and make a feature request. Contact your Cisco representative, it can help you with this question.

  I also suggest a 'method is not perfect' to control the number of concurrent calls based on the limitation of bandwidth, it's the only thing you have in VCS inbox, itself:

  https://supportforums.Cisco.com/message/4004704#4004704

  I hope this helps

  Concerning

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• Item change of line at the registration terminal State

  Hello community!

  Any of you know if there is a way to change the line in terminal condition of registration information? Suppose that the user forgot to job information about the package entry in a contract file or the budget is there a way for the Admin to correct the info field in the record?

  Thank you for your help.

  Amir

  Hello

  Unfortunately once the record reached terminal state you cannot change the line items. However you can use Reverse Auto Fill BP another to change the values. I don't know if Work Package is one of the fields that you can use to reverse Auto Fill well. Since it updates the spreadsheet, it would be not available for population auto reverse.