Logging of e-mail to the mail via tunnel server
I have problems to set up e-mail logging on an ASA 5510 to my system remotely. We are connected through the VPN site-to site.
I have the SMTP server defined on our server of mail on the main site, but traffic does not through the tunnel. I can remote into a machine installation remotely and successfully telnet to the mail server on port 25. It seems that just the ASA has problems. I can post my configuration, if necessary, but was hoping someone could point me in the right direction. Thank you in advance.
Rob Pettigrew
OK, so what happens is that when the asa remote sends the e-mail, it uses its external interface as the source ip address, but the location of the configured mail server on is an ip address private and traffic dones't are counted as valuable traffic to the vpn and the right package gets down.
If you have two options: -.
1 > give your e-mail server, a public ip address pay and place this ip address in asa remote for the mail server.
2 > do the origanating of traffic to the external ip address of the asa remote IP private adds the e-mail server as interesting traffic for vpn, so that it gets encrypted and properly routed.
Manish
Tags: Cisco Security
Similar Questions
-
Unable to send mail via exchange server with Version 38.0.1 - password problems
Last week, when my computer desktop auto-upgraded to 38.0.1, he lost the ability to send mail with SMTP. (It always returns an error message saying that the password is not recognized). I went around and with the administration of the server, and they are sure that the problem is on my end. All server settings are correct, according to the administration of the server and, in any case, I do not change them what has worked with earlier versions of this morning, I finally had to restart Thunderbird on my home computer. I tested the Version 31 immediately before restart - it worked. Then I tried the Version 38.0.1 immediately after the restart, - it did not work.
I have disabled the firewall on the computer, but it made no difference. Both computers running all Windows 64-bit both 8.1; they have two different firewalls.
I pasted in the troubleshooting information in Thunderbird below.
Thank you
The fApplication Basics
Name: Thunderbird Version: 38.0.1 User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:38.0) Gecko/20100101 Thunderbird/38.0.1 Profile Folder: Show Folder
(Local drive) Application Build ID: 20150608103712 Enabled Plugins: about:plugins Build Configuration: about:buildconfig Memory Use: about:memory
Mail and News Accounts account1: INCOMING: account1, , (imap) mail.okstate.edu:143, alwaysSTARTTLS, NTLM OUTGOING: smtp.okstate.edu:587, alwaysSTARTTLS, NTLM, true
account2: INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
Crash Reports
Extensions
Important Modified Preferences
Name: Value
accessibility.typeaheadfind.flashBar: 0 browser.cache.disk.capacity: 358400 browser.cache.disk.smart_size_cached_value: 358400 browser.cache.disk.smart_size.first_run: false browser.cache.disk.smart_size.use_old_max: false extensions.lastAppVersion: 38.0.1 font.internaluseonly.changed: true font.name.monospace.el: Consolas font.name.monospace.tr: Consolas font.name.monospace.x-baltic: Consolas font.name.monospace.x-central-euro: Consolas font.name.monospace.x-cyrillic: Consolas font.name.monospace.x-unicode: Consolas font.name.monospace.x-western: Consolas font.name.sans-serif.el: Calibri font.name.sans-serif.tr: Calibri font.name.sans-serif.x-baltic: Calibri font.name.sans-serif.x-central-euro: Calibri font.name.sans-serif.x-cyrillic: Calibri font.name.sans-serif.x-unicode: Calibri font.name.sans-serif.x-western: Calibri font.name.serif.el: Cambria font.name.serif.tr: Cambria font.name.serif.x-baltic: Cambria font.name.serif.x-central-euro: Cambria font.name.serif.x-cyrillic: Cambria font.name.serif.x-unicode: Cambria font.name.serif.x-western: Cambria font.size.fixed.el: 14 font.size.fixed.tr: 14 font.size.fixed.x-baltic: 14 font.size.fixed.x-central-euro: 14 font.size.fixed.x-cyrillic: 14 font.size.fixed.x-unicode: 14 font.size.fixed.x-western: 14 font.size.variable.el: 17 font.size.variable.tr: 17 font.size.variable.x-baltic: 17 font.size.variable.x-central-euro: 17 font.size.variable.x-cyrillic: 17 font.size.variable.x-unicode: 17 font.size.variable.x-western: 17 gfx.direct3d.last_used_feature_level_idx: 0 mail.openMessageBehavior.version: 1 mail.winsearch.firstRunDone: true mailnews.database.global.datastore.id: 07443412-ffcd-4d2f-998d-7cb7d9fb13f network.cookie.prefsMigrated: true network.predictor.cleaned-up: true places.database.lastMaintenance: 1434665793 places.history.expiration.transient_current_max_pages: 104858 plugin.importedState: true print.printer_Samsung_C460_Series.print_bgcolor: false print.printer_Samsung_C460_Series.print_bgimages: false print.printer_Samsung_C460_Series.print_colorspace: print.printer_Samsung_C460_Series.print_command: print.printer_Samsung_C460_Series.print_downloadfonts: false print.printer_Samsung_C460_Series.print_duplex: 219172716 print.printer_Samsung_C460_Series.print_edge_bottom: 0 print.printer_Samsung_C460_Series.print_edge_left: 0 print.printer_Samsung_C460_Series.print_edge_right: 0 print.printer_Samsung_C460_Series.print_edge_top: 0 print.printer_Samsung_C460_Series.print_evenpages: true print.printer_Samsung_C460_Series.print_footercenter: print.printer_Samsung_C460_Series.print_footerleft: &PT print.printer_Samsung_C460_Series.print_footerright: &D print.printer_Samsung_C460_Series.print_headercenter: print.printer_Samsung_C460_Series.print_headerleft: &T print.printer_Samsung_C460_Series.print_headerright: &U print.printer_Samsung_C460_Series.print_in_color: true print.printer_Samsung_C460_Series.print_margin_bottom: 0.5 print.printer_Samsung_C460_Series.print_margin_left: 0.5 print.printer_Samsung_C460_Series.print_margin_right: 0.5 print.printer_Samsung_C460_Series.print_margin_top: 0.5 print.printer_Samsung_C460_Series.print_oddpages: true print.printer_Samsung_C460_Series.print_orientation: 0 print.printer_Samsung_C460_Series.print_page_delay: 50 print.printer_Samsung_C460_Series.print_paper_data: 1 print.printer_Samsung_C460_Series.print_paper_height: 11.00 print.printer_Samsung_C460_Series.print_paper_name: print.printer_Samsung_C460_Series.print_paper_size_type: 0 print.printer_Samsung_C460_Series.print_paper_size_unit: 0 print.printer_Samsung_C460_Series.print_paper_width: 8.50 print.printer_Samsung_C460_Series.print_plex_name: print.printer_Samsung_C460_Series.print_resolution: 219172664 print.printer_Samsung_C460_Series.print_resolution_name: print.printer_Samsung_C460_Series.print_reversed: false print.printer_Samsung_C460_Series.print_scaling: 1.00 print.printer_Samsung_C460_Series.print_shrink_to_fit: true print.printer_Samsung_C460_Series.print_to_file: false print.printer_Samsung_C460_Series.print_unwriteable_margin_bottom: 0 print.printer_Samsung_C460_Series.print_unwriteable_margin_left: 0 print.printer_Samsung_C460_Series.print_unwriteable_margin_right: 0 print.printer_Samsung_C460_Series.print_unwriteable_margin_top: 0
Graphics
Adapter Description: Intel(R) HD Graphics 4000 Vendor ID: 0x8086 Device ID: 0x0166 Adapter RAM: Unknown Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32 Driver Version: 10.18.10.3621 Driver Date: 5-16-2014 Direct2D Enabled: true DirectWrite Enabled: true (6.3.9600.17795) ClearType Parameters: ClearType parameters not found WebGL Renderer: false GPU Accelerated Windows: 2/2 Direct3D 11
AzureCanvasBackend: direct2d 1.1 AzureSkiaAccelerated: 0 AzureFallbackCanvasBackend: cairo AzureContentBackend: direct2d 1.1
JavaScript
Incremental GC: 1
Accessibility
Activated: 1 Prevent Accessibility: 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.8 4.10.8
NSS 3.18.1 Basic ECC 3.18.1 Basic ECC
NSS Util 3.18.1 3.18.1
NSS SSL 3.18.1 Basic ECC 3.18.1 Basic ECC
NSS S/MIME 3.18.1 Basic ECC 3.18.1 Basic ECC
or set true network.auth.force - generic-ntlm-v1 (under preferences |) Advanced | General | Configuration editor)
-
Unable to send mail via SMTP Server authenticated using UTL_MAIL
Hello world...
I tried to send an e-mail message using UTL_MAIL on Oracle 10 g (10.2.0.1.0), but get the error:
ORA-29279: permanent SMTP error: 550 must be authenticated
I have run utlmail.sql and prvtmail.plb connected in SYSDBA and set SMTP_OUT_SERVER.
We have recently changed our email provider and a new requires authentication for the outgoing SMTP server, where the message that I get, but so far I have not found something on how to send the user name password to the procedure of 'send', in documentation or in previous discussions or other resources.
Could someone help me solve this problem?
Thanks in advance.Not possible using UTL_MAIL, but if you roll your own using UTL_SMTP (which is what UTL_MAIL is written on the top) you can use the code fragment in Metalink Note 201639.1 to connect to a SMTP server using AUTH LOGIN.
-
I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text. I am told that this problem is because of the BING toolbar on my browser - is this correct?
original title: Messaging with the BING toolbar problemI suggest blind carbon copy yourself e-mails coming out in the future to check for other errors and if they happen then find a new Web hosting provider. They should have been aware of the conflicts, one would presume.
Steve
-
whenever I send a mail via Internet explore, the message fails to pass and I get a saying of window, that microsoft Outlook has stopped working and the system tries to the solution but in vain, no resolution, I need your support online
Hello
-Did you change on your computer due to which the question has begun?
-What operating system is installed on your computer?
-What version of Outlook and Internet Explorer are you using? -
I am not receiving emails to my original via the address via gmail. Previously, either about a week ago, I received the e-mail from my original address but now am not. Maybe a very simple solution, but as a complete technophobe I don't know where to turn! Any help appreciated. Thank you very much.
original title: loss of emailsTry to access the web interface and see if you can see all the messages from there. Otherwise, you may contact gmail to see if they can solve the problem.
Steve
-
How to set up in the process of report server 11g Linux for destype = mail
Currently, get the error when send the report as an e-mail attachment destype = mail. Is there something missed during the configuration of Mail Server?
REP-50159: distribution to destinations the report generated successfully but failed.
REP-50152: Destination ID ProfitLoss failed with the error an error occurred sending mail: null...
Compose the report via Oracle form with destype = mail, desformat = PDF and [email protected]
Log file: rwserver_diagnostic.log
[2012 05-13 T 17: 04:39.273 + 03:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50152] [oracle.reports.server] [tid: 16] [username: < anonymous >] [ecid: 0000JT6ULwsATOG6yz6iMG1Ffvn4000000, 1:18567] [APP: reports #11.1.2] REP-50152: an error occurred sending mail: null. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
at oracle.reports.server.MailService.send(MailService.java:588)
at oracle.reports.server.DesMail.sendFile(DesMail.java:186)
at oracle.reports.server.Destination.send(Destination.java:578)
at oracle.reports.server.JobObject.distribute(JobObject.java:2041)
at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2763)
at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:154)
at oracle.reports.server.EngineCommPOA._invoke(EngineCommPOA.java:94)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.performWork (ThreadPoolImpl.java:471)
to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.run (ThreadPoolImpl.java:500
]]
In order to print the report via Oracle form with destype = CACHE, desformat = PDF.
Mail server parameters are defined.
EM > reports Application Basic Configuration > settings of the e-mail server
Server port Mail Server Mail Server mail user name, password for the mail server key.
Environment:
Server-side:
Oracle Linux 5
Oracle Weblogic Server 10.3.6
Oracle Forms FMW and report 11.1.2
Configure: Current report server
Client side:
Window 7Now, reported problem is resolved, able to send report when destype = mail
Go to EM > Report Server > Admin > Advanced Configuration:
Add this topic "Reports Pluggable Destinations"New name of the Destination: mail
Class: oracle.reports.server.DesMail -
It started today. Before you start, I ran C Cleaner and also the cleaning comes with my computer program. I can access to groups, but no mail. I tried several times to enter my mail via Firefox today. I hate interest Explorer!
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
When I connect to Google mail via Firefox it redirects to my google calendar, why?
When I connect to Google mail via Firefox it redirects to my Google Calendar, why?
URL of affected sites
http://
http://www.google.com/support/Forum/p/gmail/thread?TID=7a0dfab01d9c52ca & hl = in suggests that this could be due to the add-on «Integrated Gmail»
-
To send e-mails via MAPI and not SMTPl
Hi all
Anyone have an example of LabVIEW e-mail via SMTP instead of MAPI Protocol? Our IT Department so requires.
64 bit
WIndows 7
Outlook 2010
LabVIEW 2015 sp1
Thank you!
Pete
My apologies I forgot to include the link. Must be a Friday. You can go there.
https://decibel.NI.com/content/docs/doc-16862
I hope it will work for you.
Best,
Doug
-
Outlook Express problems
I can't send or receive e-mails via Outlook Express.
I can access through my ISP webmail.
In short and in laymans terms (I'm not a tech wiz) the automatic link between my ISP and Outlook Express does not work.
I also lost all my emails in the Inbox.
I run a Windows XP Home Edition.
Any suggestions would be greatly appreciated.
Search for interference antivirus (see www.oehelp.com/OETips.aspx#3). Then go to file | Identities and establish a new identity. Add your email account and see if it works very well. If so, you can go to file | Import | Messages to bring them from the old identity.
Then, if you lost messages, check the trash and the message of the old identity store bak files that are backups of dbx files that you can retrieve (see point 2 on the page above). If there is no bak file, then my DBXpress program (www.oehelp.com/DBXpress/) has an excerpt from disc feature that will analyze the entire hard drive for messages and if they are still there, it will recover them.
Steve
-
I can't send or receive e-mails via my Outlook Express. 0x800ccc19 error code
Can't send or receive emails,
For two days, I can't send or receive e-mails via my Outlook Express.The message is:A time-out occurred during communication with the server. (Account: Mail.comcast.net, POP server: 0x800ccc19 error number, "mail.comcast.net").Comcast told me to contact Microsoft. Phone holders want me $59.00 load!Not cool - I'm networking for a job!Can anyone help?the error 0x800ccc19 treats a file corrupted or damaged in windows, try to repair outlook express, it it fails to solve your problem, uninstall and reinstall, make sure to save your emails first.
Hope this helps,-Ray -
11g - send a mail via Scheduler
Hi guys,.
I am trying to send mail via the Scheduler using 10g api, in 10 g allows us to get the tcdataprovider instance
dataProvider = getDataBase() tcDataProvider;
but when I tried to use the same thing that it did not work so I tried
tcDataProvider dataProvider = (tcDataProvider) Platform.getOperationalDS ();
sendMail tcEmailNotificationUtil = new tcEmailNotificationUtil (dataProvider);
While compling, he didn't show me the error but after that got deployment can not mount OIMDatasource to the data provider.
Gurus how do we get dataProvider in the Task Scheduler in 11g
is there a 11g api that does the same thing
Concerns
VMRetested and it's
XLDatabase.getInstance().getDatabase()
I'm on 11.1.1.5.
-
38.0.1 updated to does not allow me to log into G-mail. I know that my user name and password, cookies are enabled and clear history information. I am able to Safari.
Thank you. I could sign G-mail in Mode safe, so I "refreshed" Firefox and that took care of him. Appreciate your quick response and helpful instructions.
-
My hard drive on my IMac has only been replaced and now when I log in Lightroom it asks the serial number. I bought LR3 years and upgraded to 4 via the web. I have original in my LR3 product code number but not the serial number for my LR4. How can I get that?
If you have purchased lr4 where registered with adobe, consult your Adobe ID account - using the same adobe id for purchase / register.
Maybe you are looking for
-
What terminal uses El Capitan is bash?
Hello everyone. I know that Mac OS is UNIX-based. I also used Linux and I found that the terminal in El Capitan is Kind ' a bash? Am I wrong? Can someone tell me what are the differences between a bash on Linux and here?I did not had the time to expl
-
iCloud drive is empty but its says, full!
Hello Apple My iCloud (5 GB) says its full. When I try to make any Document or whatever in this document, the iCloud drive said: ' full - please delete something! ». my details are 2.7 GB FREE! I had No backup iPhone or everything that is done in the
-
DeskJet 2135:2135 works only on mac
Hello, I just bought my first hp and the mac does not prinding nothing.
-
Satellite A80 - a few questions about system restore
Hello world I had a satellite A80, but I got no recovery disk, so my questions are the following: 1: How to get this drive?2: is it possible that this drive is hidden somewhere on my computer (hidden partition)3: How to restore the system? Thanks & r
-
So I had problems with my computer and I was wondering how I would go to reformat my computer to a new State without losing the drivers. I had to reinstall windows XP once already and had a new start, but I need something to a restore point then I we