Logic ruined after you have configured the controller Akai. Time Machine will fix it?

Similar Questions

• Unable to connect with RDP after you have configured the port forward

  I have configured my router with port pushing forcefully with port 3389. Now when I try to rdp to the pc from outside I get the following error:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  1. remote access to the server is not enabled

  2. the remote computer is disabled

  3. the remote computer is not available on the network

  I checked that all these 3 does not apply to me. I was able to RDP pc (with the local ip address) from another pc in my network home but not from outside. Could someone help me please?

  Is the computer on which you want to connect with Remote Desktop [DRC], IE. the DRC, by using a host address static IP on your LAN? In the contrary case and the computer is restarted its possible its LAN IP address changed by denying any plan of port forwarding you set up in your router. Go to the site CanYouSeeMe and host DRC computer test.

  http://www.canyouseeme.org

  Also, when the connection to make sure that you really test from a client outside the DRC and does not use the public IP address of the router from a local computer on your local network.

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  Finally you are sure that the public IP address of the router has not changed? If you have a dynamic IP from your ISP, you can use a free as no - IP.com that maps a name to your public IP address. Call using the fully qualified domain name. Many routers support which is a free service like DynDNS for example. You can also download and install a small program on the host of the DRC. The program communicates with the No - IP or DynDNS servers on a regular basis. The server so you know what your current IP address and that map to your fully qualified domain name.

  http://www.no-IP.com/?utm_source=MSN&utm_medium=CPC&utm_term=no%20IP%20.com&utm_campaign=brand+MSN

  http://dyn.com/DNS/

• After you have configured the AAU for the first time in the GUI, not able to access the console of the AAU

  Hi all

  I'm setting up cluster for WCC (University Complutense of MADRID and IPM) environment. I moved the cs folder in a shared location (cluster env), connected to the AAU console for the first time and on the page of any given configuration him shared location of path.

  The University Complutense of MADRID on node 1 server has started successfully, but not able to log in (get a 403 forbidden error)

  Save file entry: -.

  < 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < there is a failed to initialize at the start of the AAU. >

  < 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < could not start server "server" to the URL by default relative web root "cs".

  javax.servlet.ServletException: could not start a deployment of servers of IDC.

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  Truncated. check the log file full stacktrace

  Caused by: java.io.IOException: Oracle WebCenter content could not initialize inside the servlet environment.

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  Truncated. check the log file full stacktrace

  Caused by: intradoc.common.ServiceException:! csResourceUtilsFileIOError! csResourceUtilsFileReadError, activestate.hda

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:348)

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:191)

  at intradoc.resource.ResourceUtils.serializeDataBinder(ResourceUtils.java:64)

  at intradoc.server.ActiveState.serializeData(ActiveState.java:221)

  at intradoc.server.ActiveState.load(ActiveState.java:58)

  Truncated. check the log file full stacktrace

  Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone

  at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:373)

  at intradoc.serialize.DataBinderSerializer.receiveEx(DataBinderSerializer.java:550)

  at intradoc.data.DataSerializeUtils.receiveEx(DataSerializeUtils.java:87)

  at intradoc.data.DataBinder.receiveEx(DataBinder.java:2080)

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:327)

  Truncated. check the log file full stacktrace

  Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone

  at intradoc.common.IdcDateFormat.optimizeFormat(IdcDateFormat.java:692)

  at intradoc.common.IdcDateFormat.initEx(IdcDateFormat.java:291)

  at intradoc.common.IdcDateFormat.initWithDefaultTimezone(IdcDateFormat.java:187)

  at intradoc.common.IdcDateFormat.init(IdcDateFormat.java:151)

  at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:364)

  Truncated. check the log file stacktrac full

  Help, please.

  Kind regards

  Vipul

  Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone

  Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone

  Have what version of the WCC you installed?

  Do you have any specific time format located in ucm config.cfg? If so, then comment out him, and then start the server.

  You have the time zone set to GMT0? This can be checked from the activestate.hda file.

  Try the following solution to replace the zone on all had file on /ucm/cs

  Perl-e ' s/tGMT0/report/g;' -pi.save $(trouver /ucm/cs-type f)

• How can I keep old emails to download after you have configured the address

  I just install a professional e-mail address on thunderbird but don't need the 7000 + old emails to download from the server
  How can I avoid this?

  If it's gmail, visit their Web site and search for the function 'recent '.

  Otherwise, and I guess that it is IMAP, he's just doing what it is supposed to do; show you what is on the server. Your best choice is to go to the website of the provider of messaging, place messages you don't need to see their own records and not to subscribe to those folders in Thunderbird.

  If it's POP, a new account in Thunderbird does not know what you have seen before, so just of gets it everything. Beware, it will almost certainly move all messages from the server to the client, then don't start immediately remove things. The 'other files' technique described for IMAP should work here too, as POP sees no folders on the server other than the Inbox.

• the WAN connection becomes too slow after you have configured the VPN (Site Site)

  Hello

  I have two branches connected via WAN (MPLS) connection using two 2921 routers.the connection is 2 M.

  I set up a VPN between these two sites, but after the connection has become very slow.

  y at - it something I can do to speed up the speed of connection.

  VPN proposals are:

  Proposals of the phase 1: 3DES, pre-shared,.

  Phase 2 proposals: esp-3des esp-sha-hmac

  I don't think that lower levels of security proposals will add a lot to the speed...

  Hi Marc,

  one thing you should definitely is a hardware encryption go if you do not already tht, it also reduces the load on your cpu

  You can try other things is play with mtu, according to your line mtu and what applications are mainly used. try setting the mtu of at least 60 odd bytes lower than the mtu and also sometimes server line recommended mtu settings like server many have obligation to mtu to 1300 or 1400, if that's not it can cause a lot of re transmissions, you can also try fragmentation before encryption

  http://www.Cisco.com/en/us/docs/interfaces_modules/services_modules/VSPA/configuration/guide/ivmvpnb.PDF

• After you have uninstalled the trial version, Installation Manager will let me install my paid versions.

  I used to have a trial version of CS6 Master Collection that I uninstalled when she came running and then took advantage of designer Cloud student deiscount. Now, I'm trying to install the applications that I need, Illustrator, Indesign and Photoshop, but for all applications which I have already had a trial version, Installation Manager tells me there is an existing installation (even if they were all uninstalled and my uninstall program to remove all traces of applications) and now the Installation Manager will not let me install applications...

  On a side note, I'll say it's nice that Adobe does not all customer support the weekend either, their programs seem you easier to use illegally and then use legitimately.

  -I thank you in advance for any help you can provide!

  Run the vacuum cleaner: http://www.adobe.com/support/contact/cscleanertool.html

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Forums CWMS drop after you have entered the code meeting

  Hi all

  We have webex 2.6.1.45.B - AE, call out of work, but a drop after you have entered the code-meeting... Work of DTMF.

  may be, because: you are using a trial version of the Cisco WebEx meeting server which expires in 32 days. Buy licenses to host for your system to avoid the limitation of access host?

  or someone has an idea?

  Thank you very much!

  Hello

  This problem is caused by a bad configuration of the integration of CUCM with CWMS.

  Make sure you check you SIP Trunks and SIP configuration on CUCM routing model.

  Make sure that your points in routing SIP Trunk SIP of Point Application model.

  Make sure that the Partition configured in routing SIP model belongs to a CSS that is configured in the LoadBalancing SIP trunk under:

  1. change of itinerary calling search space

  2 outside dialogue see calling search space

  Also, refer to this post to understand why the model of routing SIP and Application Point SIP trunks are used: https://supportforums.cisco.com/discussion/12879351/cucm-and-cwms-call-routing

  In addition, this guide to the official reference documentation: http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_6/Planning_Guide/Planning_Guide/Planning_Guide_chapter_0101.html

  I hope this will help.

  -Dejan

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  try to enter

  43061481

• HP 4500 Envy: How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  I don't want to receive the email confirmation of the printer - how do I disable it?

  Hello

  Please sign in to your account connected HP

  b click my account

  b click on Notifications.

  (c) uncheck the e-mail notifications

  d save change

  Kind regards.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed the ripple 0.9.4.1 I can't find a way laucnhing it

  After you have installed the ripple 0.9.4.1 I can't find a way laucnhing, there is no program menu icons, not on desctop... nowhere.

  What is the way of how correct installation?

  I installed it on the D drive instead of c... but it's okay

  PS. anyone can fix version on the main site, it says 0.9.1 but actual installed version is 0.9.4.1, it confuses everything team.

  Open chrome.

  In Explorer, navigate to:

  C:\Program Motion\Ripple 0.9.4.1\ search

  Drag ripple_ui.crx chrome.

  Basically, see here:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_getting_started/Use_the_Ripple_emulator_C...

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.