Unable to connect with RDP after you have configured the port forward

Similar Questions

• Computer laptop bluescreens with BUGCODE_USB_DRIVER after you have closed the lid

  My HP with Windows 7 X 64 laptop recently started giving the bluescreens with
  BUGCODE_USB_DRIVER immediately after I close the lid and open new, as well as when the computer tries to stop.
  I don't know what type of newspapers I can post to display more clearly the problem or where I can find them, guidance would be appreciated on this topic.

  Here are the specifications of my laptop: http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06b/321957-321957-3329744-64354-64354-5186811-5218648.html?dnr=1

  Hello

  Thanks for posting this question in the Microsoft Community.

  1. what security software is installed?

  2. don't you make changes to the computer before this problem?

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Logic ruined after you have configured the controller Akai. Time Machine will fix it?

  So I am using Komplete Kontrol for over a year. Problems of cero. I have a new MPK261 AKAI and proceeded to set up in the logic, following the instructions on the AKAI website for this (http://www.akaipro.com/kb/article/1600).

  I don't know what the * happened but the logic went crazy after that... the buttons on the controller to make each window I opened just flash and pop up intermittently.

  I'm not really try know what happened (doubt I'll ever find and the AKAI people do not react), my guess is these AKAI placed somehow in conflict with the settings of Komplete Kontrol, and I have replace the file com.apple.logic.pro.cs from the library > Preferences, which also could have been she.

  So, I just want to ask if using Time Machine to settle things a few days back will correct this? I've never used a time Machine (I have defined daily backups, but never had to use before), so I don't know if it will work.

  Thank you!

  Before going to the road Time Machine... (which I do not know the answer anyway)

  Try this:

  With the logic does not--

  Remove the 10 logic preferences file AND the areas of shared control file.

  (In your case, simply remove the control surfaces pref)

  In the Finder, choose go > go to folder from the menu.

  Type ~/Library/Preferences in the field 'go to folder '. (Note :) Type exactly-> ~/Library/Preferences)

  Press the Go button.

  Delete the file com.apple.logic10.plist from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the user manual Pro Logic for more details on how to do it. If you are having problems with a with Logic Pro control surface.

  then delete the file com.apple.logic.pro.cs from the Preferences folder.

  Next time you start logic will be rebuilt the default surface control file.

• After you have configured the AAU for the first time in the GUI, not able to access the console of the AAU

  Hi all

  I'm setting up cluster for WCC (University Complutense of MADRID and IPM) environment. I moved the cs folder in a shared location (cluster env), connected to the AAU console for the first time and on the page of any given configuration him shared location of path.

  The University Complutense of MADRID on node 1 server has started successfully, but not able to log in (get a 403 forbidden error)

  Save file entry: -.

  < 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < there is a failed to initialize at the start of the AAU. >

  < 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < could not start server "server" to the URL by default relative web root "cs".

  javax.servlet.ServletException: could not start a deployment of servers of IDC.

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  Truncated. check the log file full stacktrace

  Caused by: java.io.IOException: Oracle WebCenter content could not initialize inside the servlet environment.

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  Truncated. check the log file full stacktrace

  Caused by: intradoc.common.ServiceException:! csResourceUtilsFileIOError! csResourceUtilsFileReadError, activestate.hda

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:348)

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:191)

  at intradoc.resource.ResourceUtils.serializeDataBinder(ResourceUtils.java:64)

  at intradoc.server.ActiveState.serializeData(ActiveState.java:221)

  at intradoc.server.ActiveState.load(ActiveState.java:58)

  Truncated. check the log file full stacktrace

  Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone

  at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:373)

  at intradoc.serialize.DataBinderSerializer.receiveEx(DataBinderSerializer.java:550)

  at intradoc.data.DataSerializeUtils.receiveEx(DataSerializeUtils.java:87)

  at intradoc.data.DataBinder.receiveEx(DataBinder.java:2080)

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:327)

  Truncated. check the log file full stacktrace

  Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone

  at intradoc.common.IdcDateFormat.optimizeFormat(IdcDateFormat.java:692)

  at intradoc.common.IdcDateFormat.initEx(IdcDateFormat.java:291)

  at intradoc.common.IdcDateFormat.initWithDefaultTimezone(IdcDateFormat.java:187)

  at intradoc.common.IdcDateFormat.init(IdcDateFormat.java:151)

  at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:364)

  Truncated. check the log file stacktrac full

  Help, please.

  Kind regards

  Vipul

  Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone

  Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone

  Have what version of the WCC you installed?

  Do you have any specific time format located in ucm config.cfg? If so, then comment out him, and then start the server.

  You have the time zone set to GMT0? This can be checked from the activestate.hda file.

  Try the following solution to replace the zone on all had file on /ucm/cs

  Perl-e ' s/tGMT0/report/g;' -pi.save $(trouver /ucm/cs-type f)

• How can I keep old emails to download after you have configured the address

  I just install a professional e-mail address on thunderbird but don't need the 7000 + old emails to download from the server
  How can I avoid this?

  If it's gmail, visit their Web site and search for the function 'recent '.

  Otherwise, and I guess that it is IMAP, he's just doing what it is supposed to do; show you what is on the server. Your best choice is to go to the website of the provider of messaging, place messages you don't need to see their own records and not to subscribe to those folders in Thunderbird.

  If it's POP, a new account in Thunderbird does not know what you have seen before, so just of gets it everything. Beware, it will almost certainly move all messages from the server to the client, then don't start immediately remove things. The 'other files' technique described for IMAP should work here too, as POP sees no folders on the server other than the Inbox.

• the WAN connection becomes too slow after you have configured the VPN (Site Site)

  Hello

  I have two branches connected via WAN (MPLS) connection using two 2921 routers.the connection is 2 M.

  I set up a VPN between these two sites, but after the connection has become very slow.

  y at - it something I can do to speed up the speed of connection.

  VPN proposals are:

  Proposals of the phase 1: 3DES, pre-shared,.

  Phase 2 proposals: esp-3des esp-sha-hmac

  I don't think that lower levels of security proposals will add a lot to the speed...

  Hi Marc,

  one thing you should definitely is a hardware encryption go if you do not already tht, it also reduces the load on your cpu

  You can try other things is play with mtu, according to your line mtu and what applications are mainly used. try setting the mtu of at least 60 odd bytes lower than the mtu and also sometimes server line recommended mtu settings like server many have obligation to mtu to 1300 or 1400, if that's not it can cause a lot of re transmissions, you can also try fragmentation before encryption

  http://www.Cisco.com/en/us/docs/interfaces_modules/services_modules/VSPA/configuration/guide/ivmvpnb.PDF

• Any update on the problems with Safari after you have installed the new update?

  Any update from Apple. How long this problem will be resolved?

  What is the problem?

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• should I connect to internet to install after you have entered the serial number

  should I connect to internet to install after you have entered the serial number

  Serial number for which program?

  You need an internet connection as well as your serial number will register and activate your program

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• Hi people! Can someone advise me something in Lightroom please CC.  When I export files once after you have finished the adjustments etc. and I click 'Save with the previous' - how to find where it was recorded, if I forgot the last folder saved to?

  Can someone advise me something in Lightroom please CC. When I export files once after you have finished the adjustments etc. and I click 'Save with the previous' - how to find where it was recorded, if I forgot the last folder saved to?

  I guess you mean "Export with previous. If so, open the export page. It will be defined as "precedent".

• I signed up for try Adobe Captivate in my Adobe account. After you have reinstalled the verson of the trial with my Adobe account, he tells me there are days 00 for me to try the product. Why?

  After you have uninstalled the trial version of Captivate on our shared computer, I signed up for try Adobe Captivate in my Adobe account. After the relocation of the trial version with my account it tells me there is 00days for me to try the product. Why?

  If it is to be installed on the same machine that will explain why assuming you already exhausted the trial with the original installation.

• APEX does not open after you have created the new Oracle listening port

  Hi guys,.
  
  I had to re register Oracle listener using "lsnrctl start". A new listening port has been created and I am able to connect user Apex by PL/SQL Developer. Port 8080 is open.
  But if I try to open the application APEX of URL (http://localhost: 8080/apex/f? p = :::) 4550:1:0 its not opening not.) It was working fine until yesterday.
  I use Oracle XE 11 g and APEX 4.2
  
  C:\Windows\System32 > sqlplus sys as sysdba
  
  SQL * more: Production of liberation 11.2.0.2.0 kills may 7 22:21:18-2013
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
  
  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
  
  GETHTTPPORT
  -----------
  8080
  
  SQL >
  
  so I do not know why APEX does not URL. What I have to put something at the TOP after you have created the new listening port. Can you please help?
  
  Kind regards
  Marie Claire
  
  Published by: 1004608 on May 7, 2013 14:40

  Link to your thread to listen would have helped: Oracle XE 11g with Apex No problem of Listener (ORA-12541: listener TNS:no)

  It seems that your listener uses the static instance via the listener.ora file registration and missing entries for the http service. Edit your listener.ora (F:\Apex_Installed\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora) file and add the following entries in the listener.ora file DESCRIPTION_LIST. Then, restart the listenerer.

  (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW)
  )
  

• HP 4500 Envy: How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  I don't want to receive the email confirmation of the printer - how do I disable it?

  Hello

  Please sign in to your account connected HP

  b click my account

  b click on Notifications.

  (c) uncheck the e-mail notifications

  d save change

  Kind regards.