Login error. SCR

Similar Questions

• Lookout 6.6 - login error: there is no security file

  I am trying to run the Lookout 6.6 evaluation. It loads fine, I get a message saying that it is running the evaluation version. I press OK to clear this box and opens a window to logon. It is completed with the default settings, Administator, local doman, no password. I click on login and it gives me the error that is in the subject line, there is no security file.

  I read here that the lookout.sec file does not exist in the System32 folder. In this case, I found it and it's there.

  I try different usernames, I took the .sec file and copied in various places: windows folder and the program root folder - obviously, there was no effect. I tried modifying the lookout.ini file to remove the log on information to see if it cleared (even deleted the file to see if it works), but does not. I also tried to reinstall the program, but there is no uninstall button - windows program removal tool may not even remove, change or repair the program. I ran the installation a couple of times as well.

  Anyone know what I can do?

   

  Here's what I'm running:

  (I bought this computer today)

  X 64-bit of Windows 7 Home Premium

  4 GB of ram

  hard drive 500 GB

  It is very minimal, because the entire computer is intended to do is run this program and replace the Lookout 5.0 computer was running (mobo got fried).

  -Let me know if you have any suggestions.

  Understand how to uninstall. After having done that and reinstall it seemed to work. Do not know why.

• Integration Facebook Login error

  error on line 9 in column 35: xmlParseEntityRef: no name

  This is the error I get, I've tried everything and can't seem to solve it. It appears just after I get my credentials, I'm under Flash builder 4.5.1 AS3.0 and GraphAPI_Mobile_1_7.swc. I have the Facebook application configuration, and I use the good APP_ID. This app is going on the BB Playbook with the updated facebook updated app. What I'm trying to do is to upload a picture on facebook, I pasted my code below, can someone help me or at least tell me what means this error? Thank you!!!

  public function fb_share(bmp:Bitmap, _stg:Stage){    stg = _stg;    img = bmp;    FacebookMobile.init(APP_ID, handleInit);}
  
  protected function handleInit(response:Object, fail:Object):void{    trace(response + + fail);    handleLogin(response, fail);}
  
  protected function handleLogin(response:Object, fail:Object):void{    if(response){        var values:Object = {message:'My photo caption', fileName:'FILE_NAME',image:img}        FacebookMobile.api('/me/photos', handleUploadComplete, values,'POST');                    } else         FacebookMobile.login(handleLogin, stg, ['user_photos', 'publish_stream']);    }}
  

  Good news! I may have found a solution, seems to work for me just need to teak my code a little.

  you will need to download the source of the graph api from here:

  http://code.Google.com/p/Facebook-ActionScript-API/downloads/detail?name=GraphAPI_Source_1_7.zip&can...

  Follow the instructions in comment 4 here:

  http://code.Google.com/p/Facebook-ActionScript-API/issues/detail?ID=353

  Then, you create the structure of your library so that all instructions from your import function.

  private message with your email address and I will send you mine zip upwards.

  Good luck!

• Admin Login error

  I get an error 404 login (this resource is not found). It is said this earlier problem was solved, but I am still unable to connect.

  This is a new site, the domain name to GoDaddy, but we have implemented A-Records this week to point to the BC. I was trying to find out if the domain has now made BC serveres and now I can not connect.

  I see that you added a record for the non - www of your domain is pointing to our IP we.

  However, you also have to create one for the version of your domain www.

  - http://screencast.com/t/6AKdionloxkR

  "If you want to use the external DNS service for your domain name, you must create a records for both the www and non www from your domain name and point them to the corresponding IP address of the system (based on the data center uses your site).

  "For the correct IP address to use, see IPS to use for updating DNS information."

  Once this is added, you should be able to access the admin on the field as usual.

  In the meantime, you can access by using the URL of the system until the two records has add correctly through your registration office.

  http://lancasterfarmlandtrust.BusinessCatalyst.com/Admin

  Kind regards

  -Sidney

  
  

• Facebook login error

  Suddenly, I get a Facebook connection error:

  "Facebook username or incorrect password. If you have recently changed your password, please enter the new password again now. »

  I made no changes to my Facebook account and my UID and PW work very well on the Web site. Back on the screen of the phone account does not help. I have no idea why this is happening or if it is related to the testing of the software. Everyone knows this?

  Thank you

  dcedte

  Restart the phone didn't help.

  I got running again by removing and re-adding to the account (on the phone). In the process, I lost the history of this account on the phone. Not what I would call a real solution, but it works again.

  dcedte

• Vista hangs after login, error event ID _

  Hello, I had a lot of trouble with the Vista machine for a few days. System boots, I have connection, I see the office, then after a three or four minutes, freeze current applications, then I can't do anything. Freezes even if I do not open all the apps. So I try Ctrl-Alt-Del, nothing seems more answer. So I have to hold down the power button to shut up down, then power, boot without failure. When in safe mode, system seems to work very well. I can access files, etc.

  I tried the method suggested to go to msconfig, turning off all services and startup items, then try to turn them back on a few at a time to try to isolate that one poses problems. Last week, I thought that I reduced to superfetch as the problem, so I disabled it, and my system has worked fine for a day, pc used for several hours, then turn it over to freeze problems.

  I also tried to go into safe mode event viewer, examine the mistakes and try to solve the problems. I do not have any progress.
  I copied the error: ID of event below. Can anyone provide assistance, advice or where to start?
  Thank you.
  ============================
  my system:
  Toshiba Satellite L305
  Pentium Dual-Core 2.0 GHz
  3.0 GB RAM
  32 bit OS
  Vista Home Premium, SP1

  ---------------------
  Event Viewer
  Errors
  Application errors, then the system errors

  =================================
  Log name: Application
  Source: Microsoft-Windows-EventSystem
  Date: 2009-10-26 22:56:46
  Event ID: 4609
  Task category: event system
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Internal system of events from COM + has detected what a bad code back during his treatment. HRESULT has c 8007043 line 45 of d:\vistasp1_gdr\com\complus\src\events\tier1\eventsystemobj.cpp. Contact the Services de Support technique Microsoft to report this error.

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:46
  Event ID: 3058
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The application cannot be initialized.

  Background: Windows Application

  Details:
  The metadata for the content index cannot be read. (0xc0041801)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:46
  Event ID: 3028
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Cannot initialize the Gatherer object.

  Background: Windows Application, catalog creates

  Details:
  The metadata for the content index cannot be read. (0xc0041801)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:46
  Event ID: 3029
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The plugin cannot be initialized.

  Background: Windows Application, catalog creates

  Details:
  Item was not found. (0 x 80070490)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:45
  Event ID: 3029
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The plugin cannot be initialized.

  Background: Windows Application, catalog creates

  Details:
  The metadata for the content index cannot be read. (0xc0041801)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:45
  Event ID: 9002
  Task category: Search Service
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The Windows Search Service cannot load the property store information.

  Background: Windows Application, catalog creates

  Details:
  0 x % 08 x (0xc0041800 - the content index cannot be read.)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:45
  Event ID: 7040
  Task category: Search Service
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The search service has detected data files corrupted in the index. The service tries to automatically correct this problem by rebuilding the index.

  Details:
  The metadata for the content index cannot be read. (0xc0041801)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:45
  Event ID: 9000
  Task category: Search Service
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The Windows Search Service cannot open the Jet property store.

  Details:
  The content index cannot be read. (0xc0041800)

  Log name: Application
  Source: ESENT
  Date: 2009-10-26 22:51:45
  Event ID: 454
  Task category: registration/recovery
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Windows Windows (2820): database recovery/restore failed with unexpected error - 255.

  Log name: Application
  Source: ESENT
  Date: 2009-10-26 22:51:44
  Event ID: 515
  Task category: registration/recovery
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Windows Windows (2820): database C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb: 5489 (0 x 00001571) Page check failed due to incompatibility of flush order dependency. This page should be rinsed before page 2331 (0x0000091b), but the last page empty instead first. Recovery/restore will fail with error - 255. If this condition persists then please restore it from a previous backup. This problem is probably due to a defective material 'lose' one or more colors on one or two of these pages in the past. For further assistance diagnosing the problem, contact your hardware vendor.

  Log name: Application
  Source: FSecure-FSecure-F-Secure Management Agent
  Date: 2009-10-26 22:51:41
  Event ID: 103
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  2 2009-10-26 22:51:41-04:00 jwrtosh JWRTOSH\joe F-Secure Management Agent
  Module F-Secure PSGB customer monitored by F-Secure Management Agent has stopped responding, or has ended. An attempt to restart will be made later. If you see this message frequently, contact the system administrator or reinstall the F-Secure products.

  Log name: Application
  Source: FSecure-FSecure-F-Secure Management Agent
  Date: 2009-10-26 22:51:31
  Event ID: 103
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  1 2009-10-26 22:51:31-04:00 jwrtosh JWRTOSH\joe F-Secure Management Agent
  Module F-Secure Anti-Virus Firewall Daemon controlled by F-Secure Management Agent has stopped responding, or has ended. An attempt to restart will be made later. If you see this message frequently, contact the system administrator or reinstall the F-Secure products.

  Log name: Application
  Source: Application error
  Date: 2009-10-26 21:17:21
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Failed application iexplore.exe, version 7.0.6001.18319, time stamp 0x4a966702, module SkypeIEPlugin.dll, version 3.3.0.3290, time stamp 0x4a02d40b, exception code 0xc0000005, offset error 0x00001f11, 0 x 534 process id, failed to start the application time 0x01ca56a337d4a63b.

  Log name: Application
  Source: FSecure-FSecure-F-Secure Management Agent
  Date: 2009-10-26 21:05:01
  Event ID: 103
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  1 2009-10-26 21:05:01-04:00 jwrtosh JWRTOSH\admin F-Secure Management Agent
  Module F-Secure Anti-Virus Firewall Daemon controlled by F-Secure Management Agent has stopped responding, or has ended. An attempt to restart will be made later. If you see this message frequently, contact the system administrator or reinstall the F-Secure products.

  ============================================

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:57:40
  Event ID: 7001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Network list Service service depends on the network location awareness service which failed to start because of the following error:
  The dependency service or group was able to start.

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:57:40
  Event ID: 7026
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The next (s) starting or starting system could not load:
  AFD
  DfsC
  F-Secure HIPS
  ESF
  FSFW
  jswpslwf
  NetBIOS
  NetBT
  nsiproxy
  PSched
  Rdbss
  Rdbss
  SMB
  spldr
  TDX
  Wanarpv6

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:57:21
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:
  {9E175B6D-F52A-11D8-B9A5-505054503030}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:47
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error "1068" attempting to start the service netprofm with arguments "" to start the server:
  {A47979D2-C419-11D9-A5B4-001185AD2B89}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:47
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error "1068" attempting to start the service netman with arguments "" to start the server:
  {BA126AD1-2166-11D1-B1D0-00805FC1270E}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:47
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error "1068" try to start the service fdPHost with arguments "" to start the server:
  {145B4335-FE2A-4927-A040-7C35AD3180EF}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:46
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error "1084" try to start the service EventSystem with arguments "" to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:39
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:
  {DD522ACC-F821-461A-A407-50B198B896DC}

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:51:54
  Event ID: 7031
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The Windows Search service ended in unexpected ways. It has done this 1 time. The following corrective action will be performed in 30000 milliseconds: restart the service.

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:51:54
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The Windows Search service stopped with the special service 2147749155 (0x80040D23) error.

  Log name: System
  Source: Microsoft-Windows-HttpEvent
  Date: 2009-10-26 22:50:50
  Event ID: 15016
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Failed to initialize the Security Kerberos for authentication package on the server side. The data field contains the error number.

  ================================

  All the error messages you have posted (most are related to research and are probably not part of this problem - some are related to DCOM which was caused by the initial error of the Service Control Manager won't start don't not because addictive has not started - but it does not say that (but it will be in the paper and I would like to know that) and you seem to have F-Secure Management Agent or something like) it as a secondary firewall that seems not to start but is no big deal if you have Windows Firewall upward and operation - this is a great product and does its job well - a secondary firewall is not really necessary but I guess that he can not hurt, if it works - although this could be the program which intrudes that Mcshane mentioned in his post - system freeze because he thinks (, there is violation of firewall, but I don't know which), the one that concerns me most is:

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:57:40
  Event ID: 7026
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The next (s) starting or starting system could not load:
  AFD
  DfsC
  F-Secure HIPS
  ESF
  FSFW
  jswpslwf
  NetBIOS
  NetBT
  nsiproxy
  PSched
  Rdbss
  Rdbss
  SMB
  spldr
  TDX
  Wanarpv6

  THIS could very easily cause your system will crash - in fact, I'm surprised, he started even with this error.  Did you get a lot of that or is it only once?  If you get a lot of them, this is a serious problem, we will have to address.

  Do you know when this problem started (it seems that you have a close time)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  This is not like a malware problem, but it can't hurt to check just to be on the safe side (and since we are almost out of options).  In Safe Mode with network (click several times F8 during the boot process) and try to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after you have completed all the scans.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Games for windows live fix 0x800705b4 login error

  Today when I tried to connect to Fable III of my computer, the circle of direct loading windows ran for several minutes (usually only takes a few seconds), then pop up with error 0x8000705b4.  I tried several times with the same result.  Check my game with Steam files and there was no problem there.  Support site for Windows Live is a not useful (when I chose my problem, she appeared with a page I asked 'Click here' that bring back to the previous page).
  Any ideas on how I can fix this?

  Hello

  As the problem that you experience with the connection of Windows live, it would be preferable to this post the Windows live solution Center for additional help.

  Windows Live Solution Center: http://windowslivehelp.com/

  Hope the information is useful.

• Browser BlackBerry facebook SDK login error

  I recently spent to use the SDK Blackberry facebook pot to using the source code of projects (excerpt from the tag that the pot was built in)

  .

  Since this switch, I've known browserfield problems:

  On a device, the load chart persists until I have regularized.

  On a simulator, I see:

  "Error calling content for.

  https://www.Facebook.com/dialog/OAuth?scope=user_about_me, user_activities, user_birthday, user_educati...

  Null error message. »

  where APPLICATION_ID is my correct application ID.

  The URL above will open fine in my PC and even on the browser Blackberry browser when stuck and I debugged for some time by the source of the facebook sdk and found that the earphone returngs browserfield "error: [URL]" when he tries to load the content.

  Has anyone seen similar behavior with the source SDK Blackberry code before?

  Unfortunately time did not allow me to analyse the sample with our tools or to implement the Blackberry eclipse for the trial or the other plugin.

  I went back to using the pot and put in place 2 draw up profiles for 5.0 + (including pot) and pre5.0 (does not include jar).

  Thank you

• IE Login error messages

  Related: basic troubleshooting. Hardware / Windows.

  When I open IE, I get these error messages:

  Script error

  An error has occurred in the script on this page.

  Do you want to continue running scripts on this page?

  If I click on YES or no... this message lights:

  Groove is blocked by Windows Firewall and cannot function properly.

  When I close this message... Here is this message:

  Welcome to Groove - Microsoft Office Groove

  Raphael Joseph Jr

  Ask for a password, then connect or cancel [I then CANCEL to access IE as I never activated Groove].

  Thank you.

  Hi Raphael,.

  Thanks for posting your question on the Microsoft Forum.

  I want more information, please answer the question below.

  1. you have installed Microsoft Office Groove?

  2. what version of Internet explorer that you are using?

  3. did you last changes made on your computer?

  This problem occurs because the HTML source of the Web page does not work with the script such as Microsoft Java Script or Microsoft Visual Basic script client-side.

  This problem may occur for one or more of the following reasons:

  1. a problem exists in the HTML source of the Web page.
  Active scripting, ActiveX controls or Java programs are blocked on your computer or on the network.

  2. Internet Explorer or another program, such as antivirus programs or firewalls, can be configured to block Active scripting, ActiveX controls or Java programs.

  3. anti-virus software is configured to analyze your records "Temporary Internet Files" or "Downloaded Program Files".

  4. the engine script on your computer is damaged or outdated.

  5. Internet-related folders on your computer are damaged.

  6. your video card drivers are corrupted or outdated.

  7. the DirectX component on your computer is damaged or outdated.

  Alternatively, you can follow the steps described in the following Microsoft article.

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260/en-us

  I hope this will solve the problem otherwise let us know.

  Thank you.

• Performance Scorecard 11.1.2.2 Login error

  Hello;
  
  I have an error when entering the Performance Scorecard application with admin user exepcion who has no problem
  
  In the workspace is saved well.
  
  For the moment of choice in the go-> Applications-> Performance Scorecard workspace see this error:
  
  Performance Scorecard esta having problemas para procesar su solicitud. Póngase in contacto con el administrator of Performance Scorecard.
  Message: User account is not associated to a security role.
  
  With the admin user, I have all the operating functions. The problem is to enter another user to the admin.
  
  Providing shared Services is OK.
  
  If anyone has comments or a recommendation to solve the problem, I'll be very grateful.
  
  Version: Performance Scorecard 11.1.2.2
  BD: Oracle 11G
  
  Newspapers generated is as follows:
  
  (self-adjusting)' ERROR com.hyperion.pmd.hps.actions.HPSAction services.configuration - com.hyperion.pmd.hps.session.NoHPSSecurityRoleException: user account is not associated with a security role
  (self-adjusting)' WARN com.hyperion.pmd.hps.session.LoginHelper infrastructure.communication.servlet - there is no UserSessionInfo in the session: weblogic.servlet.internal.session.MemorySessionData@31748dc
  Name = jsp_builder_EmployeeSetup.jsp
  Wire-45 WARN com.hyperion.pmd.hps.model.authorization.CASUserAccountSynchronizer services.authorizationService.accessControl - problem in obtaining corresponding to the [rceballos] user roles, does not affect synchronized user accounts.
  (self-adjusting)' ERROR com.hyperion.pmd.hps.actions.HPSAction services.configuration - com.hyperion.pmd.hps.session.NoHPSSecurityRoleException: user account is not associated with a security role
  (self-adjusting)' WARN com.hyperion.pmd.hps.session.LoginHelper infrastructure.communication.servlet - there is no UserSessionInfo in the session: weblogic.servlet.internal.session.MemorySessionData@207d4b5
  (self-adjusting)' ERROR com.hyperion.pmd.hps.model.ReverseRelationshipsContainer$ InnerReverseRelationshipsContainer infrastructure.database.sql.queries - impossible to get the associated end [< com.hyperion.pmd.hps.model.PrimaryKey@fffaff4a: object id = 327861, Version number = < not yet initialized >, B.O. class = com.hyperion.pmd.hps.model.authorization.UserAccount > 70z9.-1.56ltuh]
  relationship [< < com.hyperion.pmd.hps.persistence.castor.jdo.authorization.UserAccountEmployeeRelationshipJDO@169d8ee - 327867: primary key = < com.hyperion.pmd.hps.model.PrimaryKey@fffaff44: object id = 327867, Version = < not yet initialized > number, B.O. class = com.hyperion.pmd.hps.model.authorization.UserAccountEmployeeRelationship > 70zf.-1.-mmqj9d >: definition of relationship = < com.hyperion.pmd.hps.model.RelationshipDefinition@217cefb: name = employee user account, associate relationship class name = com.hyperion.pmd.hps.model.authorization.UserAccount, Associated class name = com.hyperion.pmd.hps.model.Employee, Type = 1, name = com.hyperion.pmd.hps.model.authorization.UserAccountEmployeeRelationship class of relationship, is composite = false >] [, associate (de) soundtrack = < com.hyperion.pmd.hps.model.PrimaryKey @ fffaff4a: object id = 327861, Version number = < not yet initialized >, B.O. class = com.hyperion.pmd.hps.model.authorization.UserAccount > 70z9.-1.56ltuh, unrestored associated () soundtrack primary key = < com.hyperion.pmd.hps.model.PrimaryKey@ffffee1c: id of the object = 4579, Version number = < not yet initialized >, B.O. class = com.hyperion.pmd.hps.model.Employee > 3j7.-1.382rb6 >]
  using the persistence of the soundtrack: com.hyperion.pmd.hps.persistence.castor.ReadOnlyBusinessObjectPersistence
  java.lang.Exception
  to com.hyperion.pmd.hps.model.ReverseRelationshipsContainer$ InnerReverseRelationshipsContainer.fetchReverseRelationships (ReverseRelationshipsContainer.java:162)
  to com.hyperion.pmd.hps.model.ReverseRelationshipsContainer$ InnerReverseRelationshipsContainer.getRelationships (ReverseRelationshipsContainer.java:60)
  at com.hyperion.pmd.hps.model.RelationshipContainerBase.getRelationships(RelationshipContainerBase.java:178)
  at com.hyperion.pmd.hps.model.BusinessObjectImpl.getOneToManyReverseRelated(BusinessObjectImpl.java:1270)
  at com.hyperion.pmd.hps.model.Employee.getAssociatedUserAccounts(Employee.java:689)
  at com.hyperion.pmd.hps.model.authorization.EmployeeUserAccountSynchronizer.synchronize(EmployeeUserAccountSynchronizer.java:89)
  at com.hyperion.pmd.hps.actions.AdminSynchronizeAction.performAction(AdminSynchronizeAction.java:51)
  at com.hyperion.pmd.hps.actions.HPSAction.perform(HPSAction.java:104)
  at com.hyperion.pmd.hps.actions.HPSAction.execute(HPSAction.java:73)
  at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
  at org.apache.portals.bridges.struts.PortletRequestProcessor.process(PortletRequestProcessor.java:52)
  at com.hyperion.pmd.hps.servlet.HPSRequestProcessor.process(HPSRequestProcessor.java:458)
  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
  at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at com.hyperion.pmd.hps.servlet.RequestCharacterEncodingFilter.doFilter(RequestCharacterEncodingFilter.java:34)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at com.hyperion.pmd.hps.servlet.PictureCacheFilter.doFilter(PictureCacheFilter.java:40)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at com.hyperion.pmd.hps.servlet.GZIPFilter.doFilter(GZIPFilter.java:56)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  
  Thank you
  
  Pedro

  >

  (self-adjusting)' ERROR com.hyperion.pmd.hps.actions.HPSAction services.configuration - com.hyperion.pmd.hps.session.NoHPSSecurityRoleException: user account is not associated with a security role

  1. go on HSS,.
  2. expand Applications,
  3. right click on Performance Scorecard,
  4 assign a security,
  5. Select the user, and to give a corresponding role that you gave in HSS. (As you update, you put in service user for HPS, otherwise do it as soon as, otherwise, you will not be able to see the user here)

  See you soon...!
  Rahul S.

• Workspace Login error

  Hi team,
  
  When connect us to the workspace page, we see this kinf of the message to come:
  
  The specified start-up document does not exist in the directory, select a new doc to start on the preference of the general tab.
  
  I just went in the General Startup tab and set a different application, now I wa able to connect to the application, but I see a different error message.
  
  Cannot find a runing hot 6800 port local server analysis please check your server and reporintg connection string and confirm that this server is in place.
  
  URI: http://epm.***.***.com/raframework/browse/dyn
  
  Code:-3
  
  Description: An error occurred the result from the process server.
  
  Edited by: Hkag October 28, 2012 22:41

  If you get an error on the 6800 port, it means generally that GSM service does not work which fits in the framework & Reporting.
  If make sure that services of the RAF run, could be worth raise them and check the logs for Reporting and analysis.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• First Web Client Login error - DRM 11.1.2.1

  Hi all
  
  I installed and configured DEM 11.1.2.1 on a Windows Server 2008 computer on a SQL 2008 R2 SQL database.
  
  I have successfully started the service and after repointing of the IIS to the correct directory structure (was originally wwwroot) customer web page loads.
  
  I try to connect using the admin user and configuration of password in configuration steps and I get the following error:
  
  The server returned an error: DRM-63017: Session does not exist
  
  I get what that means really, but without success so far, someone can help?
  
  See you soon
  Aaron

  Hi all

  There is a power supply that did the trick for me! (#13810554)

  Best regards
  MWI

• EPMA on Linux - 86 "awb.appcontainer" Login error

  Hi all
  
  After I installed Hyperion planning more on system linux-86. I can connect to sharedservice, easconsole, and work space well so that you have a problem to connect to EPMA.
  
  http:// < WebServer >: 19091/AWB.
  
  
  Error Msg
  -----------
  "awb.appcontainer" eror
  
  com.hyperion.awb.web.common.DimensionServiceException
  -----------
  
  Someone here could give me some advice?
  
  Kind regards
  Chelsea

  There are still components of EPMA that needs to be on the windows server, take a look at the support matrix - http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Login error

  Can someone help a newbie. I'm pretty much exhausted on this one.
  Thanks in advance,
  Mathew
  
  
  
  
  
  SQL > g_username_txt VARIABLE VARCHAR2 (16);
  SQL > g_password VARIABLE VARCHAR2 (16)
  SQL > g_check VARCHAR2 VARIABLE (7)
  SQL >
  SQL > START
  2: g_username_txt: = 'rat55;
  3: g_password: = 'kile ';
  4 END;
  7 m
  
  PL/SQL procedure successfully completed.
  
  SQL > CREATE OR REPLACE PROCEDURE member_ck_sp
  2 (p_username IN VARCHAR2,
  3 p_password IN OUT VARCHAR2,
  4 p_check OUT VARCHAR2)
  5 EAST
  6 p_check: = 'VALID ';
  7 lv_username_txt bb_shopper.username % TYPE;
  8 lv_password_txt bb_shopper.password%TYPE.
  BEGIN 9
  10. SELECT username, password
  11. lv_username_txt, lv_password_txt
  12 FROM bb_shopper
  13 WHERE lv_username_txt = p_username
  14 AND lv_password_txt = p_password;
  15 p_password: = 'Welcome'. lv_username_txt;
  16 EXCEPTION
  17. WHEN NO_DATA_FOUND THEN
  18 p_check: = 'INVALID ';
  END 19;
  20.
  
  CAUTION: Procedure created with compilation errors.
  
  SQL > show error
  Errors in PROCEDURE MEMBER_CK_SP:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  6/10 PLS-00103: encountered the symbol "=" when expecting one of the
  Next:
  constant exception < an ID >
  < a between double quote delimited identifiers > double Ref table Fedya
  char time timestamp interval date binary national character
  NCHAR
  The symbol '< identifier >' has been substituted for "=" continue.

  Hello

  Line 6:

  p_check := 'VALID';
  

  in the DECLARE section, but this is not a statement. (p_check is an argument, she is already declared).

  Move this line 3 lines down, after BEGIN.

• Windows Mail - login error

  Mail from windows a dialog box open request verification of user name and password. Now, Windows Mail will not work without it. I have never had this box before and never had e-mail before connect you. I don't know the user name and password. What should I do next.

  Hello

  Server of your e-mail provider may have a glitch so check with them.

  If necessary try a system restore to before, it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  ------------------------------------------

  You will need to check your settings.

  Most email providers have online instructions to set up Windows Mail. Your provider is
  everything after the @ in your e-mail address. So, if your address ends with @domail.net your
  provider would be domaine.net. In addition the email provider is also their ISP.

  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

  A guide to setting up Windows Mail beginner
  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.