Performance Scorecard 11.1.2.2 Login error

Similar Questions

• copy error: error 0 * 8007045D: the request could not be performed because of an i/o device error

  When copying the files, I get this error which is lower than
  an unexpected error prevents the operation.make a note of this error code, which might be useful if you get additional help to resolve this problem:
  error 0 * 8007045D: the request could not be performed because of an i/o device error
  filename DSc02828
  file type jpg
  size 3.27 mb
  updated the 09.11.2012
  try to jump again cancel
  Whats wrong here

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. don't you make changes on the computer before the show?
  2. where exactly you are trying to copy the file?

  Run check disk on the computer.
  a. click Start , and then typecmd.exe in the start search and then press ENTER.
  b. right-click on cmd.exe and clickrun as administrator.
  (c) in the command prompt, type the following command and press ENTER.
  Chkdsk /f
  Note: You may be prompted by a yes / no question. TypeYes and press ENTER.
  d. restart the computer so that the disk check starts. It will take about half an hour to complete the process of error checking. Do not restart the computer when the current disk check.
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  
  Summary the link:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272

  Just reply with the results. I'd be happy to help you further.

• Error message: the request could not be performed because of an i/o device error. (0x8007045D) while performing the backup does not back up Outlook

  Original title: Outlook backup problem

  I support my computer using an external hard drive.  "It does not backup Outlook, declaring: the request could not be performed because of an i/o device error. (0x8007045D).  What should I do?

  Hello

  1. How did you perform the backup? He used the Windows backup and restore functionality?
  2. you have any third-party backup software installed on your computer?
  3. have you done any software or hardware changes on your computer before this problem?
  
  To work on the issue, check the following link.
  
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  See also:
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  http://www.Microsoft.com/athome/Setup/backupdata.aspx
  Hope the information is useful.

• Save the 0x8078002A error code. The request could not be performed due to the i/o device error (0x8007045D).

  I tried to backup my C folder on a hard disk extrenal and received the following message:

  
  OT: Backup failed Windows7 0x8078002A error Code.
  Quote
  One of the files of backup could not be created (0x8078002A). The request could not be performed due to the i/o device error (0x8007045D).
  End of quote
  Can someone advise me?
  Nitin

  Hello

  Method 1
  Check the shadow copy Volume service in the services window. Use the following steps to check:

  a. Click Start and type services.msc in the search box

  b. Locate the Volume Shadow Copy service

  Make sure that the startup type is automatic. Steps to set the auto services

  a. Locate the service

  b. right-click on the service

  c. If the service is stopped and then starts the service

  d. Select Properties

  e. and in startup type, select automatic

  Method 2
  Try the steps listed in the link below: error message when you try to perform a full backup on a Windows Vista-based computer: "the request cannot be performed because of an i/o device error":http://support.microsoft.com/kb/952272 (for Windows 7)

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Drive HARD Ext cant allocated, it is said: the request could not be performed because of an i/o device error

  Hello world. IM new here.
  I would like to ask questions about the allocation of disk

  My drive HARD Ext (WD my passport) will not appear. so, I check in computer management, and my disk not allocated
  When I try to assigned by the following method
  It is said: the request could not be performed because of an i/o device error

  Please... is if everyone there a solution to this issue?

  I tried to update the firmware, WD Essential, WD utilities

  but this does not solve the problem...
  When I try to checkdisk in promptcomand but I don't know how to put it, because the drive isn't there...

  Please help me...

  Hello

  This error may be coming because of unavailable storage required for the motherboard drivers. You can follow the steps one by one, mentioned below and check if that helps.

  Method 1: Uninstall, and then reconnect the external hard drive. This method solves the problems where the currently loaded USB driver has become corrupt or unstable.

  1. Click Start, type Device Manager in the box Search
  2. Click Device Manager in the returned list.
  3. Click disk drives in the list of hardware
  4. Right click on the USB external hard drive with the question and click Uninstall.
  5. Once the hard drive is uninstalled, disconnect the USB cable.
  6. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  7. Look for the USB key in Windows Explorer

  Note: Connection of your USB external hard drive to a non powered USB hub can cause a lack of sufficient power to operate the external drive. Instead, plug it directly into your computer.

  Method 2: Install the latest Windows updates.

  This method will install the latest drivers for your external hard drive USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  If your problem still exists, go to method 3.

  Method 3: Reinstall the USB controllers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. Click Start, type device in the area Manager Search , and then click Device Manager.
  2. Expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  3. When finished, restart your computer. Your USB controllers will automatically install.

  If your problem persists, go to method 4.

  Method 4: Disable USB selective suspend framework. This method prevents your power off USB external drive.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  If this does not resolve your issue, go to method 5.

  Method 5: Install the latest drivers for your motherboard chipset. This method updates the chipset of your motherboard drivers, so that your computer will use your external USB hard drive.

  1. See the documentation for your computer that will contain the name of the manufacturer of the motherboard.
  2. Visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
     (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)
  3. Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

  Please post with the State of the question.

• 0x8007045D error: the request cannot be performed because of an i/o device error

  I brought a new seagate hard drive I tried windows backup to the windows image. But I got error 0x8007045D error: the request could not be performed because of an i/o device error. I tried safe mode and clean boot state, but nothing works. I'm not able to access backup windows in safe mode. In the State of clean boot, I get the same error

  Hello

  Welcome to the Microsoft community.

  It seems that you are unable to run the Windows backup utility on the new external hard drive. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2 are you able to access the external hard drive? If it is detected by the computer?

  To resolve this problem, I suggest to refer to article and follow these steps:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  The article also applies to the Windows 7 operating system.

  Note: when running chkdsk on the drive hard if bad sectors are found, it tries to repair this sector and if all the available data may be lost.

  If you are always faced with the question, please answer and we will be happy to help you.

  Thank you.

• "Receive the error message" Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error. "

  Original title: Windows I/O device error?

  Hi all

  I'm Chinmaya and I use Windows 7 Ultimate.

  I have this error message.
  "Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error."

  whenever I try to copy songs to my PSP device. In fact, it started when I was copying a 16 GB file from a USB on my computer. One night before everything was fine. But now he's screwed. I tried several times, restore, backup start in safe mode and almost everything that has been mentioned in other responses from Microsoft. Another important thing, I was you know is

  Whenever I connect my camera to the computer, my computer is not responding. All possible suggestions... Please help :)

  Hello Chinmaya Sharma,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, looks like you have a problem with the Windows 7 error 0x8007045D error message: the request could not be performed because of an i/o device error

  Perform the disk check and check.

  Check a drive for errors (Windows 7)

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Answer to us if you are having problems with error e/s or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Errors running SQLIOSim - Simulator/o SQL - error: 0x8007045D error text: the request could not be performed because of an i/o device error. Description: failed to get the info from cache drive to C:\

  When we execute SQLIOSim on a Server Windows 2003 VM hosted on an ESX 3.01 or 3.5 server, you get the following messages:

  Error: 0x8007045D

  Text of the error: the request could not be performed because of an i/o device error.

  Description: Failed to get the info from cache drive to C:\

  Anyone know what is the cause or how to solve the problem (if it is a question)?

  Thank you

  Had the same error and found this blog:

  http://blogs.msdn.com/psssql/archive/2008/01/14/SQLIOSim-error-request-could-not-be-performed-unable-to-get-disk-cache-info.aspx

  It will be useful.

• Adapter ODI for Hyperion Performance Scorecard

  Hello
  
  I want to install the latest version of Hyperion Performance Scorecard and I was wondering if ODI has an adapter for direct integration?
  
  I used HAL 9.2 of HPS.
  
  Thank you

  Hello

  Please refer to the bottom of post

  Adapter ODI for hyperion performance scorecard

  There isn't any direct way to integrate HPS. You must use Scorecard Import / Export utility.

  I hope this helps.

  Kind regards

  Manmohan Sharma

• Hyperion Performance Scorecard. Is there a demo available database?

  You guys happen to know if there is a demo available database to test application Performance Scorecard?

  Since there is no specific dashboard group... all the foregoing.

• Equium A60-191: 'request could not be performed because of an i/o device error. "

  I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
  It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

  I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

  I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

  1. click on start
  2. right click on my computer
  3. Select manage from the menu that appears
  4. in the computer management window, select Device Manager
  5. in the right pane, click to expand IDE ATA/ATAPI controllers
  6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
  7. Select Properties
  8. in the Properties window, click the Advanced Settings tab
  9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
  10. click OK and exit all windows.

  If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

  Device 0: Primary IDE Channel
  Unit 1: Secondary IDE Channel

  Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

• Lookout 6.6 - login error: there is no security file

  I am trying to run the Lookout 6.6 evaluation. It loads fine, I get a message saying that it is running the evaluation version. I press OK to clear this box and opens a window to logon. It is completed with the default settings, Administator, local doman, no password. I click on login and it gives me the error that is in the subject line, there is no security file.

  I read here that the lookout.sec file does not exist in the System32 folder. In this case, I found it and it's there.

  I try different usernames, I took the .sec file and copied in various places: windows folder and the program root folder - obviously, there was no effect. I tried modifying the lookout.ini file to remove the log on information to see if it cleared (even deleted the file to see if it works), but does not. I also tried to reinstall the program, but there is no uninstall button - windows program removal tool may not even remove, change or repair the program. I ran the installation a couple of times as well.

  Anyone know what I can do?

   

  Here's what I'm running:

  (I bought this computer today)

  X 64-bit of Windows 7 Home Premium

  4 GB of ram

  hard drive 500 GB

  It is very minimal, because the entire computer is intended to do is run this program and replace the Lookout 5.0 computer was running (mobo got fried).

  -Let me know if you have any suggestions.

  Understand how to uninstall. After having done that and reinstall it seemed to work. Do not know why.

• Vista hangs after login, error event ID _

  Hello, I had a lot of trouble with the Vista machine for a few days. System boots, I have connection, I see the office, then after a three or four minutes, freeze current applications, then I can't do anything. Freezes even if I do not open all the apps. So I try Ctrl-Alt-Del, nothing seems more answer. So I have to hold down the power button to shut up down, then power, boot without failure. When in safe mode, system seems to work very well. I can access files, etc.

  I tried the method suggested to go to msconfig, turning off all services and startup items, then try to turn them back on a few at a time to try to isolate that one poses problems. Last week, I thought that I reduced to superfetch as the problem, so I disabled it, and my system has worked fine for a day, pc used for several hours, then turn it over to freeze problems.

  I also tried to go into safe mode event viewer, examine the mistakes and try to solve the problems. I do not have any progress.
  I copied the error: ID of event below. Can anyone provide assistance, advice or where to start?
  Thank you.
  ============================
  my system:
  Toshiba Satellite L305
  Pentium Dual-Core 2.0 GHz
  3.0 GB RAM
  32 bit OS
  Vista Home Premium, SP1

  ---------------------
  Event Viewer
  Errors
  Application errors, then the system errors

  =================================
  Log name: Application
  Source: Microsoft-Windows-EventSystem
  Date: 2009-10-26 22:56:46
  Event ID: 4609
  Task category: event system
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Internal system of events from COM + has detected what a bad code back during his treatment. HRESULT has c 8007043 line 45 of d:\vistasp1_gdr\com\complus\src\events\tier1\eventsystemobj.cpp. Contact the Services de Support technique Microsoft to report this error.

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:46
  Event ID: 3058
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The application cannot be initialized.

  Background: Windows Application

  Details:
  The metadata for the content index cannot be read. (0xc0041801)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:46
  Event ID: 3028
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Cannot initialize the Gatherer object.

  Background: Windows Application, catalog creates

  Details:
  The metadata for the content index cannot be read. (0xc0041801)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:46
  Event ID: 3029
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The plugin cannot be initialized.

  Background: Windows Application, catalog creates

  Details:
  Item was not found. (0 x 80070490)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:45
  Event ID: 3029
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The plugin cannot be initialized.

  Background: Windows Application, catalog creates

  Details:
  The metadata for the content index cannot be read. (0xc0041801)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:45
  Event ID: 9002
  Task category: Search Service
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The Windows Search Service cannot load the property store information.

  Background: Windows Application, catalog creates

  Details:
  0 x % 08 x (0xc0041800 - the content index cannot be read.)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:45
  Event ID: 7040
  Task category: Search Service
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The search service has detected data files corrupted in the index. The service tries to automatically correct this problem by rebuilding the index.

  Details:
  The metadata for the content index cannot be read. (0xc0041801)

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-26 22:51:45
  Event ID: 9000
  Task category: Search Service
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The Windows Search Service cannot open the Jet property store.

  Details:
  The content index cannot be read. (0xc0041800)

  Log name: Application
  Source: ESENT
  Date: 2009-10-26 22:51:45
  Event ID: 454
  Task category: registration/recovery
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Windows Windows (2820): database recovery/restore failed with unexpected error - 255.

  Log name: Application
  Source: ESENT
  Date: 2009-10-26 22:51:44
  Event ID: 515
  Task category: registration/recovery
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Windows Windows (2820): database C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb: 5489 (0 x 00001571) Page check failed due to incompatibility of flush order dependency. This page should be rinsed before page 2331 (0x0000091b), but the last page empty instead first. Recovery/restore will fail with error - 255. If this condition persists then please restore it from a previous backup. This problem is probably due to a defective material 'lose' one or more colors on one or two of these pages in the past. For further assistance diagnosing the problem, contact your hardware vendor.

  Log name: Application
  Source: FSecure-FSecure-F-Secure Management Agent
  Date: 2009-10-26 22:51:41
  Event ID: 103
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  2 2009-10-26 22:51:41-04:00 jwrtosh JWRTOSH\joe F-Secure Management Agent
  Module F-Secure PSGB customer monitored by F-Secure Management Agent has stopped responding, or has ended. An attempt to restart will be made later. If you see this message frequently, contact the system administrator or reinstall the F-Secure products.

  Log name: Application
  Source: FSecure-FSecure-F-Secure Management Agent
  Date: 2009-10-26 22:51:31
  Event ID: 103
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  1 2009-10-26 22:51:31-04:00 jwrtosh JWRTOSH\joe F-Secure Management Agent
  Module F-Secure Anti-Virus Firewall Daemon controlled by F-Secure Management Agent has stopped responding, or has ended. An attempt to restart will be made later. If you see this message frequently, contact the system administrator or reinstall the F-Secure products.

  Log name: Application
  Source: Application error
  Date: 2009-10-26 21:17:21
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Failed application iexplore.exe, version 7.0.6001.18319, time stamp 0x4a966702, module SkypeIEPlugin.dll, version 3.3.0.3290, time stamp 0x4a02d40b, exception code 0xc0000005, offset error 0x00001f11, 0 x 534 process id, failed to start the application time 0x01ca56a337d4a63b.

  Log name: Application
  Source: FSecure-FSecure-F-Secure Management Agent
  Date: 2009-10-26 21:05:01
  Event ID: 103
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  1 2009-10-26 21:05:01-04:00 jwrtosh JWRTOSH\admin F-Secure Management Agent
  Module F-Secure Anti-Virus Firewall Daemon controlled by F-Secure Management Agent has stopped responding, or has ended. An attempt to restart will be made later. If you see this message frequently, contact the system administrator or reinstall the F-Secure products.

  ============================================

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:57:40
  Event ID: 7001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Network list Service service depends on the network location awareness service which failed to start because of the following error:
  The dependency service or group was able to start.

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:57:40
  Event ID: 7026
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The next (s) starting or starting system could not load:
  AFD
  DfsC
  F-Secure HIPS
  ESF
  FSFW
  jswpslwf
  NetBIOS
  NetBT
  nsiproxy
  PSched
  Rdbss
  Rdbss
  SMB
  spldr
  TDX
  Wanarpv6

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:57:21
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:
  {9E175B6D-F52A-11D8-B9A5-505054503030}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:47
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error "1068" attempting to start the service netprofm with arguments "" to start the server:
  {A47979D2-C419-11D9-A5B4-001185AD2B89}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:47
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error "1068" attempting to start the service netman with arguments "" to start the server:
  {BA126AD1-2166-11D1-B1D0-00805FC1270E}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:47
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error "1068" try to start the service fdPHost with arguments "" to start the server:
  {145B4335-FE2A-4927-A040-7C35AD3180EF}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:46
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error "1084" try to start the service EventSystem with arguments "" to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2009-10-26 22:56:39
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:
  {DD522ACC-F821-461A-A407-50B198B896DC}

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:51:54
  Event ID: 7031
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The Windows Search service ended in unexpected ways. It has done this 1 time. The following corrective action will be performed in 30000 milliseconds: restart the service.

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:51:54
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The Windows Search service stopped with the special service 2147749155 (0x80040D23) error.

  Log name: System
  Source: Microsoft-Windows-HttpEvent
  Date: 2009-10-26 22:50:50
  Event ID: 15016
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  Failed to initialize the Security Kerberos for authentication package on the server side. The data field contains the error number.

  ================================

  All the error messages you have posted (most are related to research and are probably not part of this problem - some are related to DCOM which was caused by the initial error of the Service Control Manager won't start don't not because addictive has not started - but it does not say that (but it will be in the paper and I would like to know that) and you seem to have F-Secure Management Agent or something like) it as a secondary firewall that seems not to start but is no big deal if you have Windows Firewall upward and operation - this is a great product and does its job well - a secondary firewall is not really necessary but I guess that he can not hurt, if it works - although this could be the program which intrudes that Mcshane mentioned in his post - system freeze because he thinks (, there is violation of firewall, but I don't know which), the one that concerns me most is:

  Log name: System
  Source: Service Control Manager
  Date: 2009-10-26 22:57:40
  Event ID: 7026
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: JWRTOSH
  Description:
  The next (s) starting or starting system could not load:
  AFD
  DfsC
  F-Secure HIPS
  ESF
  FSFW
  jswpslwf
  NetBIOS
  NetBT
  nsiproxy
  PSched
  Rdbss
  Rdbss
  SMB
  spldr
  TDX
  Wanarpv6

  THIS could very easily cause your system will crash - in fact, I'm surprised, he started even with this error.  Did you get a lot of that or is it only once?  If you get a lot of them, this is a serious problem, we will have to address.

  Do you know when this problem started (it seems that you have a close time)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  This is not like a malware problem, but it can't hurt to check just to be on the safe side (and since we are almost out of options).  In Safe Mode with network (click several times F8 during the boot process) and try to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after you have completed all the scans.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• When you try to perform a system restore, I get an error saying: "an unspecified error occurred during system restore." (0 x 80070002)

  original title: System Restore problems

  Hi, I have problems, perform a system restore using windows 7. I get the message: "an unknown error occurred during system restore. (0 x 80070002). any help with this problem would be appreciated. Thank you very much.

  Hello

  This applies to vista, but use it for windows 7

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and issues of windows 7

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Integration Facebook Login error

  error on line 9 in column 35: xmlParseEntityRef: no name

  This is the error I get, I've tried everything and can't seem to solve it. It appears just after I get my credentials, I'm under Flash builder 4.5.1 AS3.0 and GraphAPI_Mobile_1_7.swc. I have the Facebook application configuration, and I use the good APP_ID. This app is going on the BB Playbook with the updated facebook updated app. What I'm trying to do is to upload a picture on facebook, I pasted my code below, can someone help me or at least tell me what means this error? Thank you!!!

  public function fb_share(bmp:Bitmap, _stg:Stage){    stg = _stg;    img = bmp;    FacebookMobile.init(APP_ID, handleInit);}
  
  protected function handleInit(response:Object, fail:Object):void{    trace(response + + fail);    handleLogin(response, fail);}
  
  protected function handleLogin(response:Object, fail:Object):void{    if(response){        var values:Object = {message:'My photo caption', fileName:'FILE_NAME',image:img}        FacebookMobile.api('/me/photos', handleUploadComplete, values,'POST');                    } else         FacebookMobile.login(handleLogin, stg, ['user_photos', 'publish_stream']);    }}
  

  Good news! I may have found a solution, seems to work for me just need to teak my code a little.

  you will need to download the source of the graph api from here:

  http://code.Google.com/p/Facebook-ActionScript-API/downloads/detail?name=GraphAPI_Source_1_7.zip&can...

  Follow the instructions in comment 4 here:

  http://code.Google.com/p/Facebook-ActionScript-API/issues/detail?ID=353

  Then, you create the structure of your library so that all instructions from your import function.

  private message with your email address and I will send you mine zip upwards.

  Good luck!