Login ID

Similar Questions

• Login screen hangs

  Hello.  Since I upgraded to macOS Sierra, my early 2015 MacBook Pro freezes on the login screen.  I tried clean install, reinstall, SMC reset, reset the NVRAM.  Nothing seems to help.  I can finally drag the cursor to the button stop, but it takes a while.  Once it starts up again it is fine... until I have restart or stop again.  Any thoughts?  Thank you.

  Try to start in safe mode (hold down the key of the SIFT when starting) once or twice. The login screen freezes?

• After Malware that my login is disabled cannot start in safe mode

  Hi if anyone can help.

  A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!

  Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.

  So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.

  I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6

  I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!

  I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?

  If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!

  All suggestions welcome.

  Thanks, Ciaran

  

  How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.

  I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.

• Login screen of change in the Sierra

  I wish to have an image that is displayed when the connection. How can I do that. Photo of connection used to be located in the Caches folder but no more.

  Please do not suggest changing the wallpaper in the system preferences is not what I am referring is login screen image that I would like to replace.

  Any help appreciated.

  My image of login is in the folder Macintosh HD/Library/Caches, as it has always been.

  Check again.

• BONES of Sierra crashing to the LOGIN screen while using the service of mission control.

  After Sierra OS upgrade my MacBook Pro hangs on login screen every time I have used the function of mission control.

  Hey hernj103,

  Thank you for using communities of Apple Support. I can see your post after upgrading to Mac OS Sierra that reboots your MacBook Pro, if you use mission control. There could be a number of reasons that could cause this and I want to help you have a reliable working Mac, so I'm here to help! If you have not already done, you want to make sure that you have a backup of your data and you can use the option in the link below:

  Use Time Machine to back up or restore your Mac

  Once your data is secure, you'll want to test this function in Mode safe mode and see if you get the same effect. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. Also, it verifies your startup disk and trying to fix problems if necessary directory and delete font caches, hiding the kernel and other files of the system cache. The following link can show you how to start your MacBook Pro in Mode safe.

  Try safe mode if your Mac does not end commissioning

  If you continue to have problems after the safe boot mode, let know us and we can continue to solve the problems there.

  See you soon.

• Can I change the login email address?

  When I initially set up my Mac Pro, I used my google e-mail address as my internet cable connection.  Now, I want to change that, so I can use my mac address.  How can I change this initial login e-mail address?

  What do you mean by "my internet cable connection?

  Just where you connect on the Mac?

  Looks like you need to contact your cable provider to change.

• Black login screen

  When starting, a black login screen prevents my screen 4 K of login in. Computer must be stopped with force and restarted. Memory NVRAM/PRAM resetting has not helped.

  It seems that it is a problem with the mac and display negotiate the appropriate resolution.

  You can use the mac at all? After the reboot, does it work?

  It works with a different view?

  You can try to connect "blind"? It is possible that after a disconnection of the display and the figure of mac it. (Weird, I know; but it is not really difficult to connect even without the screen, if you know what position in the list, your account is just press the left or right arrow keys, enter, password, enter).

  Maybe better, if you have access to another mac, use the screen sharing feature to connect; then go to system-> Display Preferences and try to choose a frame that works.

• Login password

  My connection password is often not recognized, and I need to change to get it working again. I know it's just because I write it. I was told is a question of Mac OS X. I have a Mac OS X El Capitan 10.11.6.

  Thanks in advance!

  Never heard of such a problem - no, not recognizing the password of a user login didn't is not a thing of OS X.

  If you are unable to connect, how do you change the password? Using a second account? Restart of thd revovery partition?

  Use accented characters to other symbols your password? What is your language/keyboard layout?

  What I say coild occur is the BONE assuming a keyboard layout when you actually have a different

• Message starts with the iMessage login screen

  Mac OS X Sierra Message app starts with an iMessage login screen, however; When I get my good Apple ID and password, nothing happens.  When I enter incorrect information, it appears with a red warning text indicating that Apple & /or password ID are incorrect.

  How to past the login screen?  My information is correct, but the program will not always be in front of the login screen

  Hello

  He was working before you upgrade to the Sierra?

  No chance that your logic/mother Board has been replaced?

  This keeps the serial number of the Mac and is used to provide a specific connection of the device.

  Go to the Menu icon Apple and select about this Mac.

  Tab preview is to display the serial number.  (if this is not you must go to an Apple Store or the repairer so it will be again).

  Go to the menu icon Apple once again, but hold down the ALT key and select System Info.

  Open Hardware > network > locations

  The list on the right list en0 for one of your connections?

  On the old Mac en0 was Ethernet and Wi - Fi and Thunderbolt on newer Gets the following figures.

  There are some Mac without Ethernet en0 so can Wifi

  

  You can also look in Applications/Utilities and open the network utility and use the Info tab and fall down.

  

  Is missing the en0 then you need to remove some system side .plists and restart the Mac.

  I saw some information to remove all these

  

  Note the path bar across the bottom.

  Simply remove the Airport (WiFi), one maybe.

  If they did not work, then after that the appeal of Apple process is lengthy to explain.

  (you can get blocked by devices and this requires the server reset on your Apple ID on a single device)

  

  21:42 Thursday; September 22, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• How can we use iCloud password for the Sierra login account?

  Hello world

  How can we, iCloud password used for login user account Sierra?

  Kind regards

  Abdelaal

  Mine got to the last step of the download and request for administrator password I knew, I had. I went through all of the passwords, I've never used (had to hack attempts) and one of them worked after pressing 'Unlock' Have no idea why this worked, but it is now installing.

• Try to connect to my yahoo on Safari takes me in a continuous loop to the login page. It works very well with Firefix.

  Try to connect to my Yahoo on Safari brings back me in a continuous loop to the login page. My registration using Firefox works fine.

  IM using ios10 on an iPhone 6 s

• The apple logo appears after login and suddenly return. Is this normal?

  The flow rate is:

  1. connection of the screen and choose user login
  2. Enter the password and press the arrow to open a session
  3. under the password field progress bar
  4. abrupt jump page logo apple with progress bar
  5. the successful connection and jumping suddenly seems to normal desktop page

  Is it normal to see the screen of the logo apple here, because previous OSX login did not have it and the connection process is faster.

  Hi Tommy,.

  You have 2 FileVault enabled on your machine to encrypt your drive? If so, which is why you see the progress bar after you enter your password.

  With FileVault2 enabled the recovery partitition machine to manage the connection at startup then normally starts after the successful login.

• iMac returns to the login screen once logged on 10.11.6 version

  After you install the update for El Capitan 10.11.6 my iMac (21.5 "mid-2010) returns to just login screen after I connect.  The disc is fine and the permissions are correct.  I can start safe mode and connect without problems.  Any ideas?

  Greetings JPfromFairfield,

  Thanks for your post. I see that your Mac goes back to the login screen after you connected. You mentioned that you have done to ensure that the disc is fine and the permissions are good. Those who are very advanced. I know how much I rely on my Mac so I'll be more than happy to help.

  With your computer is able to start properly in Mode safe, this indicates that there may be a third-party service that is causing problems. I have some articles for you to check.

  OS X El Capitan: If you have problems with startup items

  OS X El Capitan: login users & groups preferences pane items

  You can remove all items start and the login items, and then test to see if you can boot normally, if you can, you can add one item at a time and continue his tests to see how the origin of the problem.

  Take care!

• Login screen

  I just upgraded to El Capitan in Sierra. My screen in El Capitan had a solid blue background. After the upgrade to my login Sierra, wallpaper is a fuzzy mountain scene. Why is this? How come back it blue? Thank you.

  Open system preferences > desktop and screensaver and select the Desktop tab.

  You can select a picture of office from there.

• How to you turn off the user invited on the login screen?

  How do disable you the guest user account on the login screen?

  Basically, I have a brand new Macbook, but can't for the life of me figure out how to get rid of the guest user account.

  Summary:

  • MacBook 2016
  • El Capitan 10.11.6
  • FileVault is enabled
  • Find my Mac is disabled
  • Comments User in users and groups is set to Off

  Tried the following from another forum:

  1. make sure that 'find my Mac' and guest user are disabled, restart;

  2. check if the system integrity Protection is enabled or disabled by running: csrutil status to the Terminal.

  3 if she says ' Protection of the integrity of system status: activated. "go to 4.1.

  4. If not, only 4.4 and 4.7;

  4.1 restart in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.2 go in "utilities > Terminal" and run the command: csrutil disable.

  4.3 restart;

  4.4 open the Terminal and run: sudo touch /System/Library/PrivateFrameworks/EFILogin.framework/Resources/EFIResourceBuild er.bundle/Contents/Resources, this will force the update of the connection EFI;

  4.5 reboot (again) in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.6 go in "utilities > Terminal" and run the command: Activate csrutil;

  4.7 reboot and it's fixed!

  4.8 re activate 'Find my Mac' as you wish.

  • FileVault is enabled

  You cannot disable the Guest user. This is especially in the case where you cannot unlock your hard drive. It provides a limited capacity of Safari so that you can access the services of help on the internet.

• I can't login my account on my Mac Pro iCloud (2012, 10.11.6).) More no Message, FaceTime, etc.. What is going on?

  It just happened one day. No more messages on my Mac Pro.

  Lately, it's been a divide between my iPad and iPhone as well. The iPad seems more reliable. What is going on?

  1. Open Keychain Access (located in/Applications/Utilities).
  2. In the Keychain Access menu, choose Preferences.
  3. Click general, and then click Reset my default keychain.
  4. Enter your iCloud account login password.
  5. Quit Keychain Access, and then restart your computer.