login screen Remote desktop showing on mac client connection


is there a way to prevent the display of the login screen, when connecting to a Remote Desktop client workstation? The connection is already arranged with a login, so now I need to identify 'twice'. First time with AutoConnect when you click on a workstation in Remote desktop and second manually when the other customer's screen opens. This was not in Yosemite, but appeared first in El Capitan and it's kind of annoying.

I use the old worgroupmanager to control the use of USB devices. It interacts with the login screen, too?

Is there a way I can avoid this login screen?

I have a machine that is the Mountain Lion, without Workgroupmanger, and this is the normal behavior without any login screen.

In fact, it was the Workgroup Manager. You need to disable the connection to local users only, which is enabled by default.

Tags: Servers and Enterprise Software

Similar Questions

  • Start the host lock screen remote desktop session

    Is it possible to call the lock of a host machine screen remote desktop without interfering with any active session on this host?

    The host machine might have been locked by someone who just walked away from him or the host computer can be used remotely by its regular users.

    But despite this, I would use it to run a remote session to my regular machine.


    Please contact Microsoft Community.

    I understand you are trying to call the remote desktop of the lock of a host machine screen. I suggest you post your question on scientists on TechNet.


    Hope this information helps.

  • Remote Desktop shows only not in system properties

    I'm trying to allow connections on a portable computer and connect via the internet on another.
    I've upgraded from vista Home Prem to Win 7 Home Prem 64 bit.
    I am using the MS. Remote Desktop feature  I read MS Help directions.  When I open the System Properties window and go to the Remote tab, I have the current text of Remote Assistance, but there is NO Remote Desktop block in the window.  It's just not there.  Same situation on another laptop that I have improved.  Help indicates that the feature is available in all versions.  Have not loaded all the features during installation, pourrais I be looking in the wrong place or it is not available in the NVA Home Prem?
    Can I access another computer remotely via the internet without this step?
    Also, how can I identify my full computer name (I prefer just using an IP address if possible)?  Not connected to a domain (just an internet connection and the Working Group), how can I find the remote computer?
    Thank you, Ken.

    I'm sorry, but Windows 7 Home Premium cannot accept office connections remotely on other computers.  This requires the complete edition or professional version.

    All versions of Windows 7 can connect to another computer using Remote Desktop connection.  That's what shows the help file.

    These programs allow Windows 7 Home Premium accepts connections remotely on other computers: TightVNC , TeamViewer , GoToMyPC .

    To use TightVNC, your computer must have an IP address or DNS name.  Dynamics of most of the ISP issue IP addresses, which can change at any time.  You can use a dynamic DNS service like DynDNS or No-IP to give your computer a DNS name.

  • Via hangs with masking welcome screen remote desktop connection all but the ORB start

    I have 2 computers to Windows 7. 1 a desktop computer and another is a laptop. I want to connect from the laptop to the desktop by using desktop remotely. Now, when I do, I find myself with the image of the Welcome screen that covers everything except for the ORB start. I also see my image of user if I press the Windows key on the keyboard of the laptop.

    If I close the Remote Desktop window and reconnect, everything works fine.

    What can I do to solve the problem?

    My solution was to reformat the computer and install Windows 7 64-bit edition.

  • Remote Desktop on Windows 7 Professional, connect to Windows XP SP3.


    I am trying to connect to a Win XP Home Edition SP3 computer laptop from a Win7 Pro on WLAN & Gigabit network. It always brings up this:

    Remote Desktop cannot connect to the remote computer to one of the following reasons:

    (1) remote access to the server is not enabled.

    (2) the remote computer is disabled.

    (3) the remote computer is not available on the network

    Make sure that the remote computer is turned on and connected to the network, and remote access is enabled.


    Windows XP Home Edition SP3 with RDP file Version: 6.0.6001.18589

    Windows 7 Professional with RDP Version: 6.1.7601.17514

    I also tried to download and install the latest RDP on the Microsoft Web site, and it starts to install goes up to 65% and then I get a popup saying:

    "Remote Desktop connection cannot be installed because your operating system already has a built-in version. See all programs\Accessories\Communications\Remote Desktop connections on your Start menu. »

    The Windows XP laptop has a wireless card, so I use a linksys WUSB100 V2. with my WRT610N Linkysys however Windows 7 is mostly on gigabit ethernet with router.

    I tried to run RDP on WLAN & ethernet both. No luck yet. Help, please...!

    P.S.: I need access to Windows XP laptop computer from my Win7 Pro laptop.

    Kind regards


    Thanks in advance!

    Hi PR@$#@NT,

    You can check if the following items to help you.

    Connect to another computer using Remote Desktop connection

    Configure the remote desktop on Windows 7 systems

    See also:

    How to use the Windows XP Professional Remote Desktop feature

  • Split screen / spilled desktop - monitor and Mac Book

    Hey, I'm trying to split my screen between my screen and my Macbook pro, so I can discover a desktop on my monitor screen and discovers another screen on my Macbook pro. Essentially, I want to be able to play movies while I'm working. So I have something to watch when I'm bored or need inspiration.

    Someone know how to do and can someone help me with this one.

    Thank you

    Hey there, Sammi,.

    Welcome to Apple Support communities.

    If I understand correctly, you want to know how to set up a continuous desktop computer that duration in your MacBook Pro and your external monitor rather than show the same image appears on both screens. Try to take a glance at the article below that describes the available display preferences and it will guide you in the process of setting up the extended desktop.

    OS x: how to use several displays with your Mac in Lion mountain and even before - Apple Support

    Take care.

  • Windows 7 or 8 shows the wireless client connected to the access point, but the wireless icon displays "no internet connection".

    I saw the same problem with a different providers wireless solution. When I've sniffed the air with OmniPeek and the network that the ap was conducting with WireShark, I see the arp for the gateway request going to the router, the router gateway response is sent to the suspect machine in the air, the acknowledgement of PC than the package but never fills the arp cache. I watched two arp responses in a vs work for lack of scenario, the two packages are the same.

    The only way I could solve it was to disable IP Helper (not start too) services, reboot the machine. I see 3 to 4 drops per day, but since the deactivation of this Service the machines with that I tested have not seen the question once again.

    IP Helper:
    Provides tunnel connectivity using technologies of transition IPv6 (6to4, ISATAP, Teredo, and Port Proxy) and IP-HTTPS. If this service is stopped, the computer will not have the benefits of improved connectivity offered by these technologies.

    Machines tested and fixed:

    Lenovo E540
    Lenovo W540
    Acer Aspire One
    Dell Latitude E6420

    Ip assistance service has been changed about 40 laptops, a dozen of which would fail in about an hour. So far, 0 out of the 40 saw the question since this change and reboot (reset is the key after disable it) laptops. It's been about 5 days.

    Any reason why disable this Service solves the problem? With it I can replicate the problem pretty quickly on a few different types of machines so it seems not to be driver or provider specific wireless network card. I checked through the Event Viewer logs, but nothing seems to be triggered during the show. Using the Troubleshooter or disconnect the wireless service will fix the problem for a short period only.


    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
    TechNet Forum

    Hope this information is useful.

  • Windows 7 computers not compatible Nap (for use with remote desktop gateway)

    I'm looking to implement gateway desktop remotely with NAP to enforce the integrity of the customer.

    I have gateway Remote Desktop works fine, the clients connect without problem. My problems started as soon as I implemented the NAP of the puzzle portion.

    I tried three different Windows 7 machines (two off the field) but I can't get an any of them to sign in, instead, I encounter the message "your computer cannot connect to the remote computer because your computer or device did not pass the network access Protection requirements defined by your network administrator." It seems that all the three machines are in fact considered non-compliant nap because they connect very well once I change to Non-compliant NAP network policy to allow full access. I even turned off all the policy settings in the Windows security SHV, but I still can connect, so it allows to confirm that my problem is with the machines showing non-compliant nap.

    Here are the steps that I took on the client:

    • Napclcfg.msc to enable the customer to RD gateway quarantine enforcement.
    • Services.msc to start the Network Access Protection Agent of service
    • Installed the certificate for Local computer > trusted root certification authorities

    I have read a number of results of research on this topic but nothing helped me to this day. Anyone know what could be my problem at hand?

    Thank you


    Hi Brad,

    Thanks for posting the request in Microsoft Community Forums.

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.


    Hope this information helps.

  • my remote desktop connection does not show the three options under DESK remotely

    my remote desktop connection does not show the three options under DESK remotely

    like that: -.

    Allow the connection of computers running any version of remote desktop
    That allow the connection of computers running Office remotely with authentication NLA

    Are you sure your market Win 7 Ultimate or Pro? If your running Win 7 Home Premium, you cannot use Remote Desktop host/server mode and you will not have these options.

    Go in Start > run and type winver at the prompt to find out what version of your race.

    If you are running Win 7 Home Premium or Starter watch TeamViewer as an alternative.


  • Apple Remote Desktop (3.8.5) on several network interfaces


    Running Office at distance between an iMac and a Mac mini, both running up-to-date El Capitan.  ARD version 3.8.5

    Both computers are on two networks, the WiFi network including the internet connection and is therefore "primary" and a wired machine-to-machine ethernet connection.  WiFi and ethernet are on separate subnets.

    In Didier, ARD 3.8.4, the Remote Desktop on the Mini app would announce (on Hello) as 'Active' wireless and wired interfaces, and from the iMac, I could choose who I want to use.  Usually the cables, connection gigabit ethernet to reduce network activity on WiFi.

    After these two machines 10.11.2 and ARD 3.8.5, update the Mini looks like 'Active' on the WiFi connection and 'offline' on the connection wired and is the remote desktop will not connect via the wire link. (no change with 10.11.3)

    I tried all combinations of options, I could think of to try to force the 3.8.5 on the Mini ARD announced as 'Active' on the wired connection.  Until beginning with no network connection, at all, on each machine, with all remote management and sharing turned off, re-boot both systems and leaving the disabled WiFi connection.  All to nothing does not.

    Paradoxically, file sharing works great!  It's just the Remote Desktop/screen sharing (Yes, I tried also, all possible combinations) will not announce or connect to the wired connection.

    When the two networks are active, sharing on the Mini preferences show the IP address for the primary network (WiFi) as well as the name (Nimitz.local) of the computer.  However, if the WiFi connection is not active there is no IP address displayed and the ".local" does not appear in the name of the computer.  It appears as just "Nimitz" not "Nimitz.local".

    I went through all the / library, folder ~ / Library, looking for whatever it is possibly connected to this issue.  I opened the files, checked the files, replaced the files and deleted the files without result.

    So my question is: how to do Remote Desktop or screen sharing to connect to the wired interface?  I'd rather not try and go back to Yosemite and ARD 3.8.4 if possible.

    Thank you for your patience!


    App for screen sharing, it must use the wired connection if you Set 1) Ethernet on your system of Viewer to be the first interface in system preferences-> network-> gear-> Service order icon set... and 2) to connect to the target by its IP Ethernet address. Remote Desktop is the MAC address of each computer and combines the addresses into a single entity. Most likely, the second computer that shows 'offline' is a file incomplete or dead. I would like to delete it. ARD promotes the address who has worked both previous. In theory, you can turn off WiFi and connect once via Ethernet and it will remain.

  • Addition of family XP Edition Remote Desktop Services

    I have a laptop with Windows XP - Home Edition.  I want remote access to this laptop to a Tablet using the Desktop Client remotely by Xtralogic, Inc.

    The presentation of the product Xtralogic said, "the following operating systems have remote desktop Services and can be connected using Xtralogic Remote Desktop Client without software additional server-side: Windows XP Professional, [other deleted for brevity]."

    Literature Xtralogic saye also expressly as Windows XP - Home is not Remote Desktop Services out of the box.

    My question is this: the necessary Remote Desktop Services software can be added separately to my laptop with XP Home?  How can it be acquired or bought?

    We can install the remote tool. Please visit this link.


    Kind regards
    Chauvet J.
  • Linksys WRT1900 AC comments account login screen works only on certain Android tablets

    I have the Linksys WRT1900 AC and always try to find problems with the existing material. For some reason, almost half of my Android tablets do work well with the guest accounts. For example, the Tablet sees the guest account of Linksys and links, however, I never see the login screen to enter the password "guest" in my setup, in fact, send and receive data. I'd rather do not yet have a password on the guest account, but when I tried that in the Linksys configuration it wouldn't let me have no password. So, I'm trying to find how to force the login screen appears to enter the password "guest" to complete the process to send/receive data.

    I don't know if the problem is with the tablets, Android, the browser of the Tablet, or some other problem. Since each niece and nephew shows up with 2 or more phones and devices, I really want to understand why some show the login screen, and others do not (but reported 'connected'). Any help appreciated.


    Open a browser and access the internet so the login screen will come out. If the devices does not connect, try forgetting the network, and then connect again. There is no way to remove the password for the network of comments, it's for your own safety. To understand how network invited, click on the links below:

    How to manage the feature to access comments using the Smart Wi - Fi connection account of Linksys

    Network Guest frequently asked Questions


    Linksys technical support

  • Taskbar "won't go away" during Remote Desktop sessions more

    Hello.  A few weeks ago, I noticed my taskbar is more 'disappear' when I connect a desktop session remotely.  It's my phone, I always used to log in my work computer at home.  When I do that and going full-screen remote desktop, my taskbar to the laptop would be hiding and this would be my taskbar to work down as if I was sitting at my desk, normal work normally as I always knew, even when I used to use XP.

    A few weeks ago, I ran updates system and when I did, this behavior started (or stopped, depending on how you look at it).  I don't want to go through the pain of having to turn autohide on and off whenever I use my laptop to connect my system of work.

    Is there some sort of option maybe turned it while updating that I'm missing that would cause this happening now, and more importantly, that I come back to it back.

    Thanks in advance.

    I just fixed it.

    I don't know if there was an update that conflict, but I had to go to the properties of the remote desktop, make sure that it is set to "open like a normal window", click the Advanced tab and then select it to always run as an administrator.  That fixed it.

  • Maximize the remote desktop does not

    When I restore a session extended full-screen remote desktop now, he will not return to full screen.  Please see this screen cast.


    The work around is to edit the default.rdp with a text editor and set "screen mode id: i: 0. »

    Anyone else having this problem?

    Best regards, Mike DePouw

    Hey Mike,

    Try these 2 methods to get the full screen working in Windows 7.

    Method 1:

    a. start "Remote Desktop connection".

    b. click 'Options '.

    c. click on the "View" tab

    d. on "Display Configuration" settings, you can change the display of "Remote Desktop connection" by moving the slider of "small to large.

    e. moving the "slider" all the way to large, the display settings will automatically set in 'full screen '.

    Method 2:

    Use CTRL-ALT & Break to return to the screen in full-screen.

    For more information about the remote desktop connection it see below section of Windows Help.
    Remote Desktop connection: frequently asked questions

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Remote Desktop - conflict between the remote control and the host user?

    We set up Microsoft Remote Desktop on a Mac with a remote computer that is running Windows 7 Professional.

    What happens when:

    1. the remote user tries to connect to the Windows host computer while someone is working on it?

    2. a person is trying to work on the host computer, and the remote user is logged?

    Is the second locked user, is there a warning of the conflict, or is there another way that Remote Desktop manage such a conflict?

    DRM for any assistance you can provide.

    Stuart A. Forsyth

    E-mail address is removed from the privacy *.

    Hi Stuart,

    Thanks for posting your question on the forum of the Microsoft community.

    The question will be better suited to the audience of professionals on the TechNet forums.

    I would recommend posting your query in the TechNet forums.
    TechNet Forum

    For reference:

    Thank you

Maybe you are looking for

  • Integration of Siri Whatsapp...

    Hey people, is this work?   When I try Siri comes says "Whatsapp is not ready for me yet.  I thought it was available from launch?

  • Re: Portégé R700 - 15 p - cannot use the recovery on SSD 64 GB cd

    Hello I replaced my HARD drive to a low size of 64 GB SSD. Unfortunately I can not run the recovery cd, he stuck with the error "not enough space". I found that I got stuck when he tries to create the DATA partition (for storing the HDDRecovery) Any

  • Drop a Subvi with wired inputs

    Hi all Is it possible to file a Subvi on the block diagram and have all the (necessary) inputs automatically wired with constants. Vaguely, I remember reading how to do this in a previous post (possibly a nugget), but can't find any more. I think it

  • I get audio but not video, when I download 'wmv '.

    This is the case in my emails!

  • Uneven printing with the new cartridge

    I have a Color LaserJet 2605dn printer and have just replaced the magenta cartridge - previous leaked toner in the printer. The new cartridge does not print evenly.  It is the color at the center of the page, gradually fading to almost nothing on bot