Remote Desktop - conflict between the remote control and the host user?

Similar Questions

• What is the most important difference between 3D Picture control and controlling the display of Simulator

  I want to create a simulation of 3D on the front panel, and I see that we can use a 3D image control or a display of Simulator control. It seems that each of them can be used at the same position. What is the most important difference between 3D Picture control and display of Simulator?

  Hi sfh1,

  You are right, I found examples of Robotics that use 3D photo control and display Simulator control to display a scene 3D on the front panel. After further research, it seems that control the display of Simulator adds additional features compared to the 3D picture control. The control displays Simulator allows the user to right-click control during execution and change the background color, draw fashion, draw contact, view the ID of robot, display sensor data, suspension of service Simulator and reset service Simulator.

  More in depth on these options and the display of control Simulator can be found here:

  http://zone.NI.com/reference/en-XX/help/372983D-01/lvrobogsm/robo_controls_concepts/

  If you would like more information on the picture here 3D control is another resource:

  http://www.NI.com/white-paper/3170/en/#toc2

  Kind regards

• Conflicts between the 'Éléments' and 'CC '.

  When installing CC, I came across serious problems. The German support he blames to my network, but this was not true. My admin has discovered that there is a conflict between 'Photoshop Elements' and CC. As a precaution, we also uninstalled 'First 11 Elements'. After the installation of CC has worked well.

  There is of course no need to have 'Éléments' as well as 'CC Photoshop"on a single computer, but for my a few videos YouPorn 'Premiere Elements' was quite enough. Anyone know if it is possible to reinstall 'First Elements 11' on the same computer with 'Photoshop CC' and "Lightroom CC"?

  Thank you and best regards.

  Normally, there is no conflict between different adobe products and versions (except acrobat).

• LabView RT versionconflict between the host and target

  Hello everyone,

  for my diploma, I work with a compact system in rio (cRIO-9074) with two I/O-modules. After some research, I created a small project which includes an fpga - and a host vi. I wanted to test my project, so I've compiled the fpga vi and you want to run the host-vi. But then I got an error that said that the versions of the software LabView real-time between the host PC and target (is the cRIO-controller meant?) are different.

  As a solution, I was told to check versions and reinstall the software Real Time using MAX. Now my problem is that I don't know where I can check the version and/or how I can solve the problem to get the project running.

  I added the errorwindow (in German) as an attachment.

  I hope you can help me.

  Better subject.

  Schu3

  MAX is measurement and Automation explore National Instruments.  Open, then expand "remote systems".  You should see your cRIO system.  Expand and you will see 'software' in the list.  Right-click on it and choose to install the software.  That will open a window that will allow you to select what software and what version to install on the cRIO.  Install the version of LabVIEW that matches the one that you use for development.

• Difference between the hosts and virtual machines

  Happy new year!

  I guess that's a stupid question, but I don't know the answer to it.

  I created pools from VM. Some jobs in the pool are hosts and some virtual machines. What is the difference between the hosts and virtual machines. I thought I could only create virtual machines, but I guess I could create hosts as well. -What happened?

  Thanks for your help.

  where does say desktops are hosts?  A host is usually referring to an ESXi server.  A virtual machine is just the guest OS running on the host computer.  A pool is a group of VMs that can extend over several hosts.

  Gunnar

• How to configure the network between the host (Windows 8) and Guest (Linux)

  Hello

  I am trying to configure network between the host (Windows 8) and Guest (Linux). Guest on VMware Workstation 8.

  Using this network, I want to configure putty so that I can access comments linux to a PuTTY that is installed on the host (Windows 8).

  Thank you.

  Abdul

  To obtain external access to comments (access the guest from the host), you must configure the IP static within the guest (Linux) as below and restart the network (service network restart)

  eth0 is a dynamic IP (DHCP) to get wireless internet access

  eth1 is a static IP address

  

  

• Workstation 9 - slow network performance between the host and guest

  I am running windows 8 on the host and installed by 9 trial. Then installed windows 8.1 as a comment system.

  I'm a slow, very slow network between the two.

  If I send files to and from the computer with another guest, transfers are normal, but if I try the same files between the host and the guest, they are really slow.

  I use a bridge connection.

  I read elseware to disable the following on the guest card:

  Large Send Offload v2 (IPv4)

  Large Send Offload v2 (IPv6)

  But that did not help.

  Thoughts?

  Maybe then try Hyper-v, it help you better.

  report this incident to Vmware if you can

  Concerning

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• Disable communication between the host and the virtual machine

  I have VM Server 2.0 and one of the virtual machines has the same name as the server and even if the virtual computer is connected to the host only network it generates the Windows error message: duplicate names exist on the network.

  is there a way to disable communication between the host and the virtual machines? I just need a virtual network that is isolated from my network complete and host also.

  Thank you.

  The GUI Server2 is not to choose the other unused vmnets.  Then edit your file VMX use a different vmnet of 0, 1 or 8.  (which are bridged, host-only and NAT)

  Thus, for example, if your VMX has a line that says:

  Ethernet0.VNET = "VMNet0.

  change to:

  Ethernet0.VNET = "VMNet2.

  (This assumes that you have not used the network Editor to fill the vmnet2 either).

• How to disable the sharing of files between the host and guest XP PRO?

  Hello my setup is:

  Host of XP PRO and XP PRO comments using NAT.

  How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

  In the comments

  I tried to disable simple file sharing in folder options and uninstall

  File sharing and printing of LAN properties but can always see and have access to the

  Organizing actions of folder...

  Help please!

  Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• Lack of communication between the host computers

  Hello

  We have a small installation demo (2 x ESXi5.1 build 799733 hosts) of vCloud Director 5.1.1868405 running build and meet a strange communication with the VMS problem when they sit on different hosts.

  That we have tested with several organizations and different types of OS etc and the behavior is the same, an example would be that if one of the VMS is a Web server of the site can be displayed if from VMs on the same host, however when you separate guests cannot view the Web site. Virtual machines can ping each other wherever they are.

  I hope someone here can help point me in the right direction to solve this

  Thank you

  Marc

  Looks like your pool of network is down.  If you are using a paralytic, routed Org or Org... isolated network looks that transport between the two does not work.

  If virtual machines are on one of these network types and on the same host, it works.  If they are on different hosts, it fails.

  Is what kind of network pool?  VCNI, VXLAN etc.?

  Make sure that the physical network is actually configured to transport data.  for example, VCNI uses a VLAN and MTU to 1524 (suggested min) for transportation between the hosts.  However, you need to configure it on the fabric of network (switch, etc.).

  VXLAN has its own requirements, but it has a way to test the virtual wire.

• Sharing data between the host computer stores in different groups.

  I read in several places that sharing of data warehouses between the host in different groups is possible, but I don't get the warm and fuzzies when the hosts are different versions.

  vCenter is 4.1

  Group Alpha is 4.0 vmfs 3.33

  Bravo of cluster is 4.1 vmfs 3.46

  My goal is to move the virtual machines that meet the specific criteria of group Alpha for Cluster Bravo then the availability of flowing freely between clusters.

  The only concern I have is when adding Cluster Bravo to the same host of 3PAR alpha value of Cluster sharing all the data store, Cluster Bravo will try to reformat to vmfs 3.46 break Cluster Alpha to see the virtual machines stored in the warehouses of shared data?  I don't want to present the old warehouses of data to the new cluster only break from old cluster.

  Hello vmsjsn

  ESX/ESXi 4.X supports all versions of VMFS file system.

  Using your example of Alpha and Bravo. Kudos to will write more Alpha. you will be able to cross all hosts on the shared storage.

• Qosmio x 300-remote control and the console above the keyboard do not work

  Sorry for my bad English...

  I have a new Qosmio x 300-11 L and the problem is my remote control doesn t work. What can I make it work again? And the console above the keyboard doesn t too much work.
  Thanks for help

  Sascha

  Have you installed Windows yourself? Some drivers Toshiba important may be missing.

  Do you have XP or Vista?

• Tecra 750: Question on the infrared remote control and TV

  Hello

  I wonder if anyone can help. I have an old Tecra 750 which I use as a sound system to play my MP3 collection. It has an infrared detector on it and I was wondering if it is possible to use this to receive a TV remote control IR, so I can use a remote control to navigate through my audio files. Does anyone know how or where I could find how? Y at - it a freeware to help maybe? Is it still possible?

  Thank you!

  Hello

  The computer uses infrared IRDA, and it is not compatible with the type of infra-red used by normal remote controls.

  You could get an external infrared remote control which must be plugged into the USB port.

• Remote Desktop connection between my Windows 7 and a new friends Windows 8.1

  Hello. My friend just got his first computer and is completely lost. She has absolutely no experience with a computer and a computerphobe of full tilt. We are 400 miles away and tried to help him by phone with little luck. To make things worse, I think that someone in which she rose to set his computer did not understand 8.1 either. I've been computing for a long time and have studied 8.1 and feel comfortable with it. But I never configured before remote connection and am unsure of certain things.

  First the operating environment:

  My computer: Inspiron 560 s under Windows 7 Home Premium.

  I'm on a home using Netgear network. I'm not using a wifi connection.

  His new computer: desktop HP Pavilion Slimline model 300-413 running Windows 8.1.

  I'm not sure of its network connections.

  Note: I use this to 8.1 as a guide (the link opens the guide for Windows 7...? But I use the guide for 8.1)... http://Windows.Microsoft.com/en-us/Windows/Remote-Desktop-connection-FAQ#1TC=Windows-8

  I think I can happen by steps 1.a. to 1.e. without any difficulty.

  Now the questions:

  1. in step 1.e.1. regarding 'Locations', I don't know what are the options it will present with or should I tell him to choose?

  2. to step 2.b. on the 'system', I know that she must see 'Computer name' and 'Working group', but I'm not sure what she's going to see in which area '? This does not appear on my version of Windows 7.

  3. If I can talk to him through this, she will be able to watch what I'm doing on his monitor?

  Please keep in mind that it is a perfect beginner so no instructions to its end should be as simple as possible, and I am new to 8.1 and uncertain as to what exactly she will see during the installation.

  She told me yesterday that she is so frustrated that she's almost ready to throw it all in the street and forget it. So any help and advice would be greatly appreciated. Thank you.

  Mark

  We can help you help questions.  Frankly McAafee exhale is a good thing IMHO.  I would never use it for multiple reasons

  It can remove using this program to uninstall McAfee and use Microsoft Security essentials

  McAffe often contributes to BSOD

  
  

  I remove and replace it with Microsoft Security Essentials

  
  

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  http://www.Microsoft.com/security_essentials/