Logo of my 5s to return with a sense of matte

Similar Questions

• why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  Hi James,

  Let us know a few details about the issue.

  1. which operating system you have installed on the computer?

  2. what web browser do you use to open itv player?

  3. are you able to play other videos online on other sites?

  If you use Internet Explorer, then you follow these methods.

  Method 1:

  You can run the fix for video problems in Internet Explorer.

  Playing video files crashes or blocking Internet Explorer - Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/

  Method 2:

  You can also follow the steps in the following article and check.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings and Add-ons. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.

  Feel free to get back to us for other queries.

• How do you géreriez it? Repair returns with the even more serious problem

  I sent my Aspire S7 392 for repair of flickering of screen. She is not fixed and updated the BIOS. I fired. He returned with the "replaced LCD module. Now of good unit tests"BUT it has circular spots that appear and disappear when he touched the back of the upper part. I'm so frustrated. Without my computer for 4 weeks. Has started a new case, but I have no confidence in the will of Acer Fixez_ the.  Who to contact? Would ask you for replacement?

  Solar salvation,

  I know the screen is one of the best features of the S7-392 and I can understand the disappointment that you must have if you do not get the most out of it. Could you send me the following information in a private message and let me know how we can help?

  Name:

  Serial number:

  Phone number:

  E-mail address:

  Thank you
  Cory

• "the software you are installing has been Windows logo testing to verify its compatibility with Windows XP."

  so I try to install the new itunes 10 on windows xp and I get this error, "the software you are installing has not passed Windows logo testing to verify its compatibility with Windows XP." "Continue your installation of the software may impair or destabilize the right operating system, either immediately or in the future." Microsoft strongly recommends that you stop this installation vender now and contact software for software that has passed Windows Logo test. "then why I get this error? and what should I do so that he can stop? I want to say I've never had this happens in their first versions... more it says its compatible with xp. so, once again, microsoft... why I get this error?

  Hey, Yes, I find the problem. do not install the update from the apple software. installation of apple.com it won't give you the error when downloading it on their actual location.

• WINDOWS WITH OUTLOOK 13 8.1. MAIL server error RETURNED WITH MESSAGE 550.

  I USE WINDOWS 8.1 WITH OUTLOOK 13. MAIL server error RETURNED WITH MESSAGE 550. Please login to use this mail server. How can I do this?

  So that we can look into this further, please provide the affected email account and complements of NDR (or error), you received so that we can determine the cause of this problem. To do this, please follow the steps below:

  1 right click on the message to bounce on your Inbox.

  2 choose the option show message source on the menu drop-down. You will see a window containing the headers of e-mail messages and content.

  After doing so, to validate the source of the message with all components of the notification of non-delivery such as:

  > Final destination

  > Action

  > Status

  > Diagnostic code

• Return with incorrect serial number facility

  Try installing Acrobat X Pro to a new computer with window 8.1.

  With serial number of my products. Always returns with incorrect serial number.

  You probably may need to contact the Support from Adobe.  Sounds like a problem with the license, then you can try this KB: error of incorrect serial number

• AdobeUpdateServerSetupTool returned with the code: 1.

  I just ran the command:

  / Applications/utilities/Adobe\ Application\ Manager/CCP/utilities/AUSST/AdobeUpdateServerSetupTool - root = / Library/Server/Web/data/Sites/Default/AdobeUpdates - incremental

  on the server.

  He gave the following result

  Incremental synchronization is selected.

  Treaty on the elements of the 1077 1077.

  Error 1 points.

  AdobeUpdateServerSetupTool returned with the code: 1.

  For more information consult AdobeUpdateServerSetupTool.log to/Users/mutualmobile/Library/Logs.

  Any ideas what error code 1 mean?

  I guess this means that there are some errors. I posted another message on this forum

  http://forums.Adobe.com/thread/1394780

  Error 1 is probably for these errors listed in this thread.

  Basically, it does not matter this error message you get, just run the command again and I hope that it works fine the 2nd time.

  If this is not the case, try again until it works well at the 3rd time.

• Is there a workaround for the html files exported Muse return with precision when opened in DreamWeaver d

  Is there a work around for html files exported Muse return with precision when opened in DreamWeaver Design view?

  Take a look at this thread which should answer your query - http://forums.adobe.com/message/5231996.

  Thank you

  Vinayak

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• Updated ReadyNAS 316 OS, returned with the DNS error

  I've recently updated as well to my NAS 6.5.2 devices and since doing so, the VA started sending notifications, update attempts failed. When I investigated further, I discovered that none of the functions of the update seems to work. For example, when I click to search for updates to the NAS operating system rather than show 6.6.0 or tell me there is no update he insteads returns a DNS error. My network has not changed in any other respect. 2 devices still sync with eachother and all my users can still access their data in the two places for the more basic functions appear to be not affected. I have manually updated them to 6.6.0 OS but the OS DNS error update remains on this device. I noticed that at some point the AV definitions that update before the manual up-to-date operating system and now it seems to work (for the moment) very well. However, as I have already said, the error remains the update of the OS. Rather than report the status update I get a DNS error.

  Thoughts anyone?

  A friend today got the same problem after the update of the firmware.

  Try turning off IPv6 support on your network interfaces.

  It has resolved the issue.

• I ran a hard drive diagnostic and she returned with CODE RETURN fail 7

  My computer crashed, trying everything I ran a "hard drive Diagnostics' and she came back with MAXTOR 6y160m0-fail return code 7.

  Does mean my HDD id no good?

  http://www.ihatedell.NET/forum/phpBB3/viewtopic.php?f=8&t=7798

  According to above it is.

• Bad HTTP response returned with status code: 404 at low level sample push inititator

  Hello, I have installed low level sample push inititator in my localhost, everything is OK but when I try send a single message push, the server return

  "Bad HTTP response with the status code returned: 404."

  Can someone help me, please

  

  What is the URL used (Please replace your CPID with ' x)?

• sfc scannow, returns with corrupted files.

  I've posted this before, but I'm having a problem yet.

  I found where I can put my laptop a (Asus K54C) back to the factory settings. Type just F9 at reboot, and it takes two clicks to reinstall a cliché of the BINGO OOTB (out of the box).

  It's just the updates that I need to reinstall. One must initially be corrupted as KB3022345 fact files. I just uninstalled and when he went to reinstall I hid it. Did another scan and it was resolved.

  I was told that with my laptop Asus web storage can cause the sfc show too corrupt files but I uninstalled but it always shows file corrupt after another scan.

  Can someone tell me what could be the cause. I also had the Explorer automatically downloaded 11 and there are a lot of new programs it such as 'live mesh window' in Arabic, Greek and other languages, etc. which wasn't there before...

  Informati... lol

  I think that the updates have been removed from the system by windows automatically with a new update because they are no longer there.

  I read that the corrupted files were not actually corrupt at all. When the new update came, he addresses this problem. My pc of partners has the file as uninstalled and then hidden to avoid the conflict, as it did, but we never really needed to do, but anyone would appear in it when their pc tell them that it's corrupted.

  I installed the preview for windows 10 insider and most corrupt steps have returned. The laptop runs like a machine new, very impressed so far.

  Thanks for your reply.

• LOV property for the 'return' with pragmatic value

  Hi gurus,

  I use

  Forms [64 Bit] Version 11.1.2.2.0 (Production)

  Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production

  With the options of partitioning, OLAP, advanced analytics and Real Application Testing

  How can I set property LOV to return the value of a column with pragmatism.

  

  We're going on the basis of a State, I want Field2 value in any other column we will say that it is Control.attribute3

  Dear Sir

  You cannot change the name of checking back to a LOV. Instead, you can return the value of a dummy control, and then you can assign the value to different controls depending on the condition.

  I hope this helps.

  Manu.

• REST base BSF calls returns with SOAP envelope Addressing WSA namespaces

  We expose the OSB (sampleREST) Proxy service as a RESTful service that accepts requests HTTP (GET, POST etc.).
  For the HTTP GET method, the proxy service called BPEL process synchronous Composite SOA (HelloWorldProject).
  
  The HelloWorldProject is a simple synchronous BPEL process that returns the response in the form of "Namaste, < < nom_entree > >.
  
  OSB HTTP GET request:
  
  http:// < < hostname > >: < < port > > / sampleREST/proxy/sampleREST
  
  Answer:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  " < processResponse xmlns =" http://xmlns.Oracle.com/MySOAApplication/HelloWorldProject/HelloWorldBPEL "xmlns:env =" http://schemas.xmlsoap.org/soap/envelope/ "xmlns:wsa =" http://www.w3.org/2005/08/Addressing "> "
  < result > Namaste, nanan < / result >
  < / processResponse >
  
  Description of the problem:
  
  In response, there are 3 namespaces,
  ( 1) xmlns = "http://xmlns.oracle.com/MySOAApplication/HelloWorldProject/HelloWorldBPEL"(ce n'est PAS le problème) "
  ( 2) xmlns:env = 'http://schemas.xmlsoap.org/soap/envelope/"(c'est le problème) "
  ( 3) xmlns:wsa = 'http://www.w3.org/2005/08/addressing"(c'est le problème) "
  
  For a response from REST, we expect the CORRECT answer
  
  [Envelope response soap CONTAINER AND wsa address namaspaces]
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  " < processResponse xmlns =" http://xmlns.Oracle.com/MySOAApplication/HelloWorldProject/HelloWorldBPEL "> "
  < result > Namaste, nanan < / result >
  < / processResponse >
  
  I downloaded the Code from the OSB project.
  
  How do I get the answer REMAINS without SOAP ENVELOPE and NAMES ADDRESSING WSA namespaces?
  
  Thank you very much
  Nagaraj donna
  + 91-7387483335

  Hi all

  ATLAST, Oracle has provided a fix for this problem. I had raised SR with MOS.

  PFB the SR details to download the fix for this bug fix.

  Calls for expressions of OSB with SOAP and envelope WSA dealing of namespaces (Doc ID 1635230.1) is STILL based

  I hope this helps.

  Many thanks to all for your continued support and suggestions.

  Thank you very much

  Nagaraj donna

  + 91-7387483335