Logon credentials failed timer code missing

Similar Questions

• Update for Windows XP (KB2567680) security has failed - error Code: 0 x 80070003

  Security update for Windows XP (KB2567680) failed - error Code: 0 x 80070003 I tried to install update 3 - 4 times but it continues to not be updated, can someone please tell me what to do.

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Some have had success with

  1. stop the service automatic updates, clear the contents of the DataStore and Download folders and restart the automatic updates service.
  Stop the automatic updates Service.
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click on stop.
  Click OK.

  2 remove the contents of the DataStore and Download files.
  Click Start, choose Run, in the run box, type %windir%\SoftwareDistribution
  Click OK.
  Delete the contents of the DataStore files so download

  3. start the Service automatic updates
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click Start.
  Click OK.

  This procedure will erase your history on the Windows Update Site.

• Vista Ultimate does not start: c:\windows\system32\ntkrnlpa.exe is corrupt failed error code = 0 x 2

  All of a sudden I started my laptop and Windows does not load.  I received a message "failed to nobulate".  I searched in the help forums and found that I could create a boot CD (because the OS came preinstalled on Dell INspiron 1720 laptop computer).  I tried to perform a Startup Repair 11 times.  The repair details show:

  Boot critical file c:\windows\system32\ntkrnlpa.exe is corrupt failed error code = 0 x 2

  I also tried to visit the advanced repair and selecting to restore from an earlier point in time, but I relieve error that no previous points are detected.

  Help, please!  I '; ve been against a week and need back up and going.  Thank you!

  Sue

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon

  Mick Murphy - Microsoft partner

• SMART short Self Test Failed - (error code: WHD16-8NR)

  Hi all

  I had my XPS L520X for 4 years and 2 months. I've never had a problem with its operation until last week. Randomly, it restarted and came with the PCI Realtek issue when it restarts.

  To cut a very long story short Fault find it which is going on, I reinstalled the entire operating system, including formatting of the hard drive.

  The problem of the laptop different freeze/crash and reboot with erros while doing normal tasks has not been resolved.

  I have run the Dell support center software and it shows the auto SMART test failed with the following code (error code: WHD16-8NR).

  Event log:

  Dell Support Center log file
  March 17, 2016 16:53:55
  Overall result: failed

  -------------------------------------------------------------------------------------------------------------------------------------------
  ST9750420AS [ATA:0:0\\?\ide#diskst9750420as___0005dem1#4&34e0611c&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b]}
  -------------------------------------------------------------------------------------------------------------------------------------------

  Seller: Seagate
  Model number: ST9750420AS
  Serial number: 6WS100EG
  Firmware revision: 0005DEM1
  Size: 698,6 GB
  Rotation speed: 7200 RPM
  Cache size: 16 MB
  Temperature: 43 c
  Physical sector size: 4 KB
  Logical sector size: 512 B
  Count of logical sector: 1465149168
  Supported standards: ATA8-ACS, ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
  Specification Version: Rev ATA8-ACS 4

  ----------------------------
  OS - C: [PARTITION:C\\.\C:\]
  ----------------------------

  File system: NTFS
  Volume serial number: 5087-8802
  Volume capacity: 679.00 GB
  Amount of free space: 568,63 GB
  Volume space used: 110,37 GB

  Test of the SMART State

  Test started - 17/03/2016 16:43:57
        
  Finished test:-17/03/2016 16:43:59
  Past

  Test of SMART thresholds

  Test started - 17/03/2016 16:43:59
        
  Finished test:-17/03/2016 16:44:01
  Past

  Targeted reading test

  Test started - 17/03/2016 16:44:01
        
  Finished test:-17/03/2016 16:44:05
  Past

  Try to search randomly

  Test started - 17/03/2016 16:44:05
        
  Finished test:-17/03/2016 16:44:54
  Past

  Funnel Seek Test

  Test started - 17/03/2016 16:44:54
        
  Finished test:-17/03/2016 16:46:14
  Past

  Short what SMART self-test

  Test started - 17/03/2016 16:46:14
        
  Error message:-17/03/2016 16:46:24
  The unit has reported the following State: the previous self-test completed having the read element of the test failed.
  Error message:-17/03/2016 16:46:25
  The first default LBA value is 121243744 and the failure occurred after that the device was working since 8792 hours under tension.
  Finished test:-17/03/2016 16:46:26
        Failed (error code: WHD16-8NR)

  Surface Scan Test

  Test started - 17/03/2016 16:46:26
        
  Finished test:-17/03/2016 16:47:25
  Past

  Surface Scan Test - 2

  Test started - 17/03/2016 16:47:25
        
  Finished test:-17/03/2016 16:48:58
  Past

  I also went in the BIOS BOOT MENU by pressing F12 at startup and ran diagnostics that seemed to have said everything going, however I saw a mistake, faliure in its process that was too fast for me to write the error.

  In a nutshell, my thought is that my hard drive has failed / is corrupted or is about to fail.

  My simple question is, do I need a new hard drive with the information I've provided?

  Thank you very much!

  To all those who read this topic:

  I rang Dell directly and they confirmed my hard drive needs to be replaced.

  8792 power over time, I think that its actually me good.

  Bravo and thanks for the reply ejn63

• First sends EDL with 'invalid time code format string.

  Follow the suggestions in this thread, I try to send a PCA of a first sequence to Speedgrade.

  When I try to import the Speedgrade JEL, I get this error message:

  

  ERROR

  At the time point is not valid. String (hours) invalid timecode format: '23813 + 20'

  in edition 1

  File: LR001 V 001C 2813 + 20 17 23815 + 0:00 1 + 37

  Line: 2

  I have rarely worked with EDL, but have read the guides Speedgrade and first. I must be missing something but can't tell what.  Here are the details of my project:

  I'm editing in 24 fps. Video files are generated in After Effects of DPX files. The time code is based on the DPX filenames, with the time corresponding to the number of laboratory Roll (so 11:00 11 Roll)

  I export an EDL in the CMX3600 format. I tried two settings by default and without audio. Same results. I even get the same result if I do a sequence of a single clip and try to export this EDL.

  I don't think it's a matter of Speedgrade, because that if I try to re - import EDL in first, it seems that all clips are a single long chassis.

  Any suggestions on what I might hurt would be greatly appreciated.

  Thank you

  Lev

  Figured it out. Creation of project settings must be defined on the display Format: timecode

  Lev

• Using film as a data type time codes?

  I work in the film, and I was hoping to use numbers to help me create quotes for a VFX project (based on cost per second). I tried to create a custom data type, and it works almost out of an important obstacle. -That, even if he is HOURS: MINUTES: seconds, DURING which it is not no matter what equivalent of FRAMES (which are usually 24, 25 or 30 depending on what video format you are working in).

  I use Adobe Premiere to export a list of lots of files under a CSV file, which are fine numbers. However, manipulate these data is - I would say - impossible without the support of the video time code. Anyone working on a solution for this? Or is there a suggestion feature to me link to forward this to the team of numbers?

  Thank you very much

  You can give your comments and suggestions to the numbers > provide comments numbers in your menu.

  But everything first, perhaps you could post more details of your problem, what your imported data looks like and what result you want.

  If the imported data includes a column for the frames I think you can convert that.  In all cases, the specifics would help.

  Wayne explains how to post a screenshot in this thing.

  SG

• Restore failed - error code = 0 x 241

  I'm trying to fix Acer Aspire 5552-7803 friend and ended up having to order a set of recovery disc for $20. The problem is that when I try to launch the restore of the default factory, he charges through the first two recovery disks, then on the third, I get an error message that says "restore failed - error code = 0 x 241 (WIMApplyImage impossible to apply the image: Windows cannot verify the digital signature for this file.). A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that could be... "The rest is obscured by the box and you can't scroll to read.

  I've read several posts that say they had the same problem, but have yet to find a real solution. I completely cleaned the disk and did a 'Clean' on diskpart with a Win7 repair disc. It is possible that the disc is damaged, but with the accounts that I have seen, I would not buy a new drive and then find out that the drive wasn't really the problem.

  I could really use some suggestions. Help, please.

  Thank you

  I think I finally found the problem. I tried to install an evaluation version of Windows 8 and got a slightly different, but the similar error message and google it. The first instance of the problem that I found was a solution, saying that the guy has discovered that he had a bad memory stick. I removed one and retried the recovery disks and it always failed. I swapped the memory stick and tried again, and now I'm almost finished with the full reload. I think that was the problem and I'm hopeful that we're back in business... Now to make shopping for memory.

• PING: transmit failed, error code 5.

  Hi chris,

  I also have similar problem like this.  my network connection is ok & its working fine, but I'm not able to ping giving following error

  C:\>ping 192.168.1.25

  Ping 192.168.1.25 with 32 bytes of data:
  PING: transmit failed, error code 5.
  PING: transmit failed, error code 5.
  PING: transmit failed, error code 5.
  PING: transmit failed, error code 5.

  Ping statistics for 10.22.22.1:
  Packets: Sent = 4, received = 0, lost = 4 (100% loss),

  C:\ >

  And disconnect it from the network showing connection

  error display:-connection stetus: unknown "the dependency service or group could start.

  When I go to start 'network location awareness' serivece in error 1073741288.

  In all this I have network surfing condition smoothly. but not able to connect to the local network % showing ping disconnect on the taskbar.

  Help me please to this problem...

  Patricia

  Hello Patricia,

  Thanks for posting your question on the Forum of responses of Micrsoft.

  I don't know exactly the question that your question was separated from the previous thread.

  What you ping? Another computer on your network? You are in a domain environment?
  Are all the computers on your network, Windows Vista or Windows XP?

  One thing, you can check to go in the registry.

  1. open the Start Menu > run and type regedit and press the Enter key

  2. navigate to the following location
  HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Lsa
  3. Locate the restrictanonymous key

  4. double-click on the key, set the value to 0 and press OK
  5. exit the registry and restart your computer for the changes to take effect.

  If please reply back and let us know if this helps with your error.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

  Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

  them, but the update continues to fail.  Any help would be appreciated.

  Hello

  Perform the steps from the link below and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Hope this information helps.

• Last update of security to explore failed with code C 8007371

  Original title:

  8007371c

  Last update of security to explore failed with code 8007371 c. A ran Microsift Fixit. Still having the same problem. What to do next? Thank you!

  Hello

  1. What is the description of the software update (KB number)?
  2. Are what "Microsoft Fixit" you referring?

  You can try the steps from the following link and check if it works:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know if it helps!

• Windows Update failed, error code 646. Microsoft fix - it has not corrected, error code 0 x 80040154

  Update for microsoft works failed, error code 646.  I tried microsoft fix - it for windows update got error code 0 x 80040154, context: high

  See: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/error-code-80040154-windows-vista-home/5088695c-c534-41c5-bdac-518713506875

• "Restore failed, error Code 1117

  I'm doing a system restore on a gateway nv 79 with the backup disc, I did when the computer was purchased.  I get all the way up to 86 percent brand and get "restore failed, error Code 1117, not able to perform due to an i/o error."  I can get nowhere excpet the F2 screen, so I don't know what the problem

  Hello

  ·        You did changes to the computer before the show?

  ·        You are able to boot to the desktop in normal mode?

  Method 1: If you are not able to boot to the desktop in normal mode then I suggest to start in safe mode with command prompt and run the disk check to the following address:

  CHKDSK X: /R

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Reference: Startup options (including safe mode) advanced

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: follow the instructions from the link to fix the problem:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• User files Service does not have this logon user failed to load profile and MS Office programs won't load

  I have two problems which I think are related.

  Please note that my OS is Vista Home Premium

  1. when I disabledUAC, I can load the MS Office programs successfully in both of my administrator accounts.

  2 when I have this OPTION enabled, I can load the administrator account that was installed when I reinstalled Vista.

  The other Admin account comes up with a message "the file of user Service has not this logon user failed to load the profile.

  In addition, when I have UAC turned on I can't open any of my MS Office programs, such as MS Word: "Microsoft Word has not been installed for the current user. Please run Setup to install the application.

  When I turn off UAC, I can access my second Admin account, and I can open MS Office programs in both accounts.

  I tried the MS Fixit tool, run checkdsk and sfc/scannow, restarted my computer and threw a brick at her.

  Your advice is appreciated,

  Hasiel1234

  Hi hasiel1234,

  1. what Microsoft fixit tool ran on the computer?

  2. the problem only occurs with Microsoft word application?

  3. using the Microsoft office 2002 application?

  We do not recommend disabling user (UAC) on the computer access control because it prevents unauthorized computer changes.

  I suggest that you enable the user (UAC) on the computer access control and try the steps and check them off below if it helps.

  Method 1

  See the link below and try the steps mentioned them, check if it works.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Method 2

  See the below Microsoft article and try the steps mentioned, check if it works.

  Error message "Microsoft Word has not been installed for the current user" in Word 2002

  http://support.Microsoft.com/kb/322206

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Security Essentials installation failed, error Code: 0 x 80070643

  Security Essentials installation failed, error Code: 0 x 80070643

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installing and upgrading Microsoft Security Essentials program.

  They will help you in the Forum above.

  See you soon.

  Mick Murphy - Microsoft partner