Sudden stops... no obvious cause
Hi guys
In the last two weeks my laptop Pavilion G6 2.5 year began to close (black screen) - apparently randomly, but usually when the battery is about 35%. I also lost the 'low battery' warning, and despite the changing settings and try a new profile if continued.
Initially suspected something in an update of Windows so I uninstalled and google it for any problem experienced with them. Nothing came, and after that the problem continued, I reinstalled.
Google proposed a problem of overheating or battery (via the HP support site). I ran the two suggestions battery checks and the result was "success." Calibration is not recommended.
I cleaned vacuuming the vents and checked the fan works properly and to make doubly sure I installed "Speedfan". Temperatures are in the range generally accepted - with a peak at about 55 C) but generally a little lower. There is no "hot spot" on the case of the computer and the battery itself is cool.
I'm playing with a new battery that I come to the conclusion that, despite the passing of tests, it may be in need of replacement. What do you think? Will he?
Thanks in advance.
Ramases.
Yes, you are right here too
When the capacity is reduced, but through<20-25% we="" usually="" replace="">20-25%>
But I guess that the substitute is good option now.
Yes, by calibration I meant for the current battery level is displayed.
£15 is a good deal. Also confirm if the voltage of the battery than you buy is the same as in the specifications referred to in the manual of your product.
Tags: Notebooks
Similar Questions
-
USB mouse and keyboard suddenly stopped working
My USB connected Microsoft USB Bluetooth mouse and keyboard suddenly stopped working today. After researching everything I could, I didall that I could find as a possible solution that has been:
- Update of the chipsets
- Uninstalling usb in Device Manager and reboot devices
- Updated via Device Manager, usb devices
- Reformatting and reinstalling Windows 7
- Stop, unplug and allow the card mother "reset".
- Try multiple ports
- There is no 'connect' button on my mouse so I can not sure try this
- Replace the batteries in my mouse
- Obviously both devices have been connected
- Updated the software for the mouse
I have tried literally everything I could think of or read previously and I am out of options. Oddly enough however, after reformatting and reinstalling windows, my USB storage device is found and is working, but the keyboard and mouse are not. Please don't bother not suggest anything I listed above, I obviously already tried and found no chance.
Update
I have solved my problem. For later use, if anyone has this problem and no other solution seems not work; That's what I did.I bought a USB 2 ports PCI card and installed in my computer, then go back to Windows XP. While my original front and rear USB ports still recognize a flash drive, they do not recognize the keyboard or USB mouse, make ports PCI card. I had also updated ALL the updates of windows on the site, not the auto update available on the desktop. Although I don't know the cause, I am certain that somewhere, something was is altered by the hardware or software, and my default USB ports do not recognize mouse or keyboards.
Another piece of knowledge in case anyone is interested; I use a card mother gigabyte s-series and my nvidia video card GeForce previously is no longer recognized in the port, it would cause my computer go into a State of hibernation and the monitor would go into "Analog Power Saving Mode". The only solution was to spend a friend with my video card. (Its graphics card is a GeForce 9800 GTX, mine was a GeForce 9800 GT. No reason why it should make a difference.) According to me, even if my computer is less than two years old, I was sold a bad mother. I read online cases in other forums for technical support of people having the same problem. Gigabyte motherboards stop random ports for no known reason.
-
Firefox suddenly stopped opening 'in a new window"when I ask-open"in a new tab"only
For the last two days, Firefox has suddenly stopped opening in a new window; Now, I can never have a window open at a time (even though she always let me open several tabs).
Tried everything down and rebooting not closing of course, but made no difference.
Don't have no knowledge of changing parameters - I changed or damaged something without knowing?
The only news I did recently, is download the add-on from the EPUB reader! Is there a link?Thanks a lot for your suggestions
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).
- Makes no changes on the start safe mode window.
See:
- Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
- Solve problems with plugins like Flash or Java to solve the common problems of Firefox
If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.
- Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
- Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
-
FN + F5 has suddenly stopped working on Satellite a series
A week ago my Fn + F5 shortcut suddenly stopped showing any alternative display. Now all I have is an option: LCD screen.
Since then, I tried everything I can think of: Boot with S-video cable connected
Updated to the latest NVidia Go drivers
Update Bios
(always fully patched on windows update)
There is no settings BIOS for S-video.I tried to force the external display in the NVidia control panel with no luck.
I noticed about a week there is a update from Toshiba came via windows update - update of the ACPI. I tried to roll back the driver and that didn't make any difference either. There is no option to uninstall this update, that I had to go into system and search for the item under system devices and reduce.I can only think that windows this or another day it was fact, that there are no other relevant updates. Just malicious tool updated.
This leads me around the bend. If anyone has had this problem or knows how to solve? I can't watch anything on my TV more and I'd rather not a factory re - install.
Hello
Without clean OS install, it will be problematic to find out why this happen. We can only speculate here, but it's not easy to say with certainty what can be the problem. AFAIK more switch options are available if mobile recognizes that some external device is connected.
Obviously external peripheral is not recognized correctly.It will be interesting to know what model of laptop you have. Have you tried FN + F5 option and an external monitor connected to the VGA port?
-
I have a 2015 MacBook Pro retina with OS X Yosemite and email via cableone.net. The laptop suddenly stopped to receive new e-mail messages. I can send emails from her, but not receive. I have not changed my settings. I still get e-mails via my iPhone and iPad. Cableone could not help and said to contact Apple. Anyone know what can cause this and how to fix it? Thank you.
Can remove you the account and then restart the Mac and then add him back?
-
Qosmio F50-113: sudden stops
Hello
I have recently been having a problem with my laptop suddenly stops during the games. At first I had this problem while playing with a resolution of 1920 x 1080 on my TV 42 '' connected to the laptop via a HDMI cable. This caused me start playing at 1280 x 720, which seemed to work better, until he suddenly stopped today at this resolution.
The games I've had problems with 1920 x 1080 are:
StarCraft 2
League of Legends
Super Street Fighter IV: Arcade EditionToday, it stops at 1280 x 720, during the game The Elder Scrolls IV: Oblivion. Which kind of alarms me, considering the age of this game.
Help, please.
MVH
WoowookinsHello
Laptops automatically stops due to high temperatures.
Have you noticed a higher temperature? Game all devices such as GPU or CPU executed with the highest performance and create the heat dissipation which can raise the temperature so, possibly, it's reason for the unexpected shutdown of the bottom.
Usually, you must use the clean Toshiba graphics card drivers because these drivers supports thermal protection that allows to keep the temperature low
-
My laptop suddenly stopped opening my Hotmail emails. I can connect to Hotmail and records are regularly updated with new emails, but nothing happens when I try to read an email. The cursor will just highlight the particular word on what it is and do nothing. As far as I know, nothing else was done on my computer. This could be the cause?
original title: cannot open emails.Hello
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
my internet explores all of a sudden stops working then restarts, how can I fix
I recntly been havig IE suddenly stops working then restarts itself. My virus scans are clean and I have not downloaded anything new. Any ideas? I got 1blue screen with a view of crash dump.
Hello
Internet Explorer freezes or crashes
http://support.Microsoft.com/GP/ie_freezes_or_crashesTips for solving problems with Internet Explorer
http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-ExplorerWhen you start Internet Explorer, it opens, flashes and then closes immediately
http://support.Microsoft.com/kb/967896------------------------------------------
Several troubleshooting methods:
What antivirus/antispyware/security products do you have on the machine? Be one you have
EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
may cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look
right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
ask about it here.Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpHow to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlHow to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
For Vista:
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------------------
For Windows 7:
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlI hope this helps.
-
Capacity wireless suddenly stopped working after an update of Windows Vista.
Feature WiFi suddenly stopped working after a windows vista updated. Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices. It's as if someone pulled the unit and the antenna of the portable computer. I also downloaded the wireless drivers and Setup several times without success. Wireless device appears in the Device Manager page. The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum. Is it possible that the wireless device is broken? All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop. Either way, I have a Compaq Presario F700 laptop. All the options out there? Thank you
original title: can't find the wireless deviceHello again, Kathy,
More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.Look for something listed as network radio or wireless card and make sure that it is set to enable.The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk. -
My CD/DVD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start. I have uninstalled and still get this error. When I put a CD in nothing happens. It is not read. Any suggestions?
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
detected external display suddenly stopped working - displays black screen
original title: detected external display suddenly stopped working
Hello
I have searched in several forums, but have not been able to completely solve this problem. It has been set provisionally and has not yet.This system I have:HP TouchSmart tx2 tablet pc with Windows Vista Service Pack 2 x 64-bit (Home Premium)AMD Turion (tm) X 2 Ultra Dual-Core Mobile ZM - 82, 2.2 GHzATI Radeon HD 3200 graphics cardI have been working for more than a year with a monitor flat screen Dell ST2310 external monitor and works very well with the setting "use external display only. From one minute to the next two screen went black so I forced a restart and again the same problem. I decided to manually disconnect the external monitor by unplugging the VGA cable from the laptop that turns on automatically to the main display as it would if I am disconnected display. When I connected the VGA cable again the same question in the two screens were entirely black. I unplugged once more the VGA cable if I could change the settings in Windows mobility. I plugged back in the VGA cable after changing the settings of "external display only" to 'mirror' devices and after playing for a bit, with the Windows Mobility Center, I had the external display to work again my regular settings: "external display only. This solution lasted a day and now works in the main screen and the external screen is completely black.I tried in vain to solutions:-Change VGA cables continues to experience the same issue.-Tested according to the specifications and Dell monitor Monitor works fine if the backlight is not the problem.-Records update for ATI Radeon HD 3200 graphics card and driver generic PnP Monitor and Dell ST2310.-Uninstalled ATI Catalyst Manager and re install now as AMD Vision Engine Control Center.-Checked AMD Vision Engine Control Center recognizes the connected external display.-Uninstalled the driver Dell ST2310 and re installed the driver.-On the screen settings have tried to extend the desktop on the external screen (second)Now, this is what's going on and don't know how to fix it:-Windows Mobility Center detects a monitor external, even when the VGA cable is disconnected.-When it detects the external display it sometimes detects it as DELL ST2310, sometimes as a generic Non - PnP monitor.-Sometimes under "Monitor" in the Device Manager, there are several monitors generic Non - PnP contained also the Dell ST2310 and generic PnP monitor.-When the external monitor is connected, the screen is completely black and does not work even after changing the settings Windows Mobility or Fn F4.Help!Hello
I also suggest you to update the BIOS. Visit the manufacturer for more information.
http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
WARNING:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
See also: http://h10010.www1.hp.com/ewfrf/wc/document?docname=c01881110&tmp_track_link=ot_recdoc/c00678157/en_us/c01881110/loc:4 & cc = us & dlc = en & lc = en & product = 352607 #N624
Thank you -
Wi - Fi and network suddenly stopped... Local only (Vista).
I basically solved my problem. I'm writing this in case someone else has this problem. (I was without any networking capability for about a month after a failure and request Windows update several uninstals due to a malfunction stopped responding - don't know if any of these are related?) The computer couldn't even * is * on the network.
First, I eliminated material as being the cause. My suspicion is that a firewall was still in force, even if I completely uninstalled my Antivirus and disabled the Windows Firewall already. Then I tried to disable the Base filtering engine (the "Services"), and * voila! * all returned. I immediately installed a temporary, caught up firewall on Windows Update and reinstalled my Antivirus. Everything's fine now, as long as I keep the Base filtering engine. Rebooting it stops all the networks again. I don't know if there are risks to let off, but for now, I'm happy.
******************************************************************
Sorry if it's verbose. I was no longer able to use networks of any type for about 3 weeks on my laptop Vista Home Basic. Are wired and wireless down (I use different routers to a cable and Wi - Fi), while my Office XP continues work as a champion using a router.
Everything had been working fine for a year or more until what all of a sudden stop.
I also can't connect to the network wirelessly at my school more (it is a laptop).
(Note that I am not currently under any additional firewall beyond the Windows Firewall).
Three concurrent problems occurred at the time of the failure which could be related.
(1) I tried an uninstall of the interface software LegoMindstorms NXT after a school project. Uninstalling shifted on for about an hour and has stopped responding. I did a system restore and repeated the uninstall.
(2) I noticed the 'auto-protect active"icon of Symantec AV was changed to"disabled", even if I was not disabled it and my license is up to date. In the settings menu, I unchecked and recontroler the auto-protect of selection, but it didn't fix it. I tried to uninstall it, and it stopped responding as well. I did a restore and another attempt to uninstall succeeded. Windows Firewall and defender will have to do for now. (I'll be reinstalling my AV soon and will get updates when I am able to connect again).
(3) I reviewed my recent Windows updates installed and found the last (KB982536) has a status marked "failed". I uninstalled that before that failed just to see if she had caused the next update not working, but it does not solve the problem.
* I tried several system restores, but none have set.
I also did the following:
tried another ethernet cable
* removed wired and wireless cards from the Device Manager, rebooted and (allowed them to reinstall)
* updated to the latest version of the NETWORK adapter driver by using my other computer (XP) and the copy of the USB
* sfc/scannow
* checking memory
* chkdsk
* netsh int ip reset
* netsh int ip reset c:\resetlog.txt
* netsh int Reinitialis
* netsh winsock reset
* netsh winsock reset catalog
* netsh interface tcp set global autotuninglevel = disabled
* ipconfig/flushdns
* nbstat - r
* nbstat - rr
* Microsoft Fixit "Dotnet" cleaning tool for Vista (copied from USB)
* Micorsoft Fixit "50357: cannot get an IP addy" (copied from USB) - has attempted but * is not * run
Tried to IPv6 without commitment, but has not helped - I finally put back it---------------------------------
Results of the ipconfig/all command
---------------------------------Windows IP configuration
Name of the host...: Ethos
Primary Dns suffix...:
Node... type: mixed
Active... IP routing: No.
Active... proxy WINS: No.Ethernet connection to the Local network card:
The connection-specific DNS suffix. :
Description...: Realtek RTL8139/810 x Family Fast Ethernet NIC
Physical address.... : 00-16-D4-A5-9B-7E
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::815e:ad3e:e462:4e77% 17 (Preferred)
Autoconfiguration IPv4 address. . : 169.254.78.119 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
DHCPv6 IOOKING...: 452990676
DHCPv6 DUID customer...: 00-01-00-01-0D-71-D8-8B-00-16-D4-A5-9B-7E
DNS servers: fec0:0:0:ffff:1 1%
FEC0:0:0:FFFF:2 1%
FEC0:0:0:FFFF:3 1%
NetBIOS over TCP/IP...: enabledWireless Network Connection 2 wireless LAN adapter:
The connection-specific DNS suffix. :
... Description: Broadcom 802. 11b / g WLAN #2
Physical address.... : 00-1A-73-0F-EB-C9
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::2e:baf9:726c:defb % 15 (Preferred)
Autoconfiguration IPv4 address. . : 169.254.222.251 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
DHCPv6 IOOKING...: 268442227
DHCPv6 DUID customer...: 00-01-00-01-0D-71-D8-8B-00-16-D4-A5-9B-7E
DNS servers: fec0:0:0:ffff:1 1%
FEC0:0:0:FFFF:2 1%
FEC0:0:0:FFFF:3 1%
NetBIOS over TCP/IP...: enabledCard tunnel Local Area Connection * 6:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {6A632B82-93D2-45ED-8829-3B6C5DF2C50F}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 7:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 02-00-54-55-4E-01
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 9:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {5ECD7A6B-D36C-4179-9928-D56EFA36F365}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 10:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Card 6TO4
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 11:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft 6to4 adapt #2
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 12:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft 6to4 adapt #3
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes---------------------------------
(An upgrade to Windows 7 can solve the problem, but this isn't an option I will consider for now.)
Your settings do not look correct to me. There is no default gateway (which alone explains why you can't connect). Good number of other entries look right either (they are different, that I'm used to seeing).
I suggest you remove all your network connections (remove them all) and start from scratch. Configuration of the LAN connection, and when you get this work then set up the internet connection and get this to work. Do not re - install connections, you do not need more (it seems that you have a good number of people). You have tried to repair these connections and there may be something wrong with them which cannot be repaired (they can be corrupted or some type of conflict or other). Starting with a network connection fees registration with nothing (not wired or wireless) and do everything as if it was a new machine can solve the problem. Make sure you know the correct settings before deleting the current connections (and make sure that they are correct even if you need to contact your ISP for confirmation).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
CD player is suddenly stop working
my cd player is suddenly stop working and I found there is no driver cd/dvd ROM in my it's Manager device missing what to do? any help
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Windows 7 screen saver has suddenly stopped working
Recently, the screen saver on my laptop (Sony Vaio Z model VPCZ119GX with 6 GB of ram and a core i7 processor) has stopped working. He has always worked in the past, but suddenly (as of mid-June 2010) stopped it. None of the Windows 7 default screensavers work (for example to mystify, ribbons, etc.), nor fact Windows live Gallery screen saver.
I am running Windows 7 Professional x 64. If I go to preview, I can see the screen saver, but it does not start after a period of inactivity. I reduced the timeout to 1 minute and I tried both require a password and no password and neither work. I do not use a wireless mouse (I have read other posts that a mouse without a wire could cause this problem) and I have fixed via the USB port. I went in the Manager of peripheral and done so that devices that have power management options have been disabled. I checked my task manager and I don't notice anything out of the norm running in background.
Here's the interesting part. If I connect to the hidden administrator account screen saver works perfectly. If I create a new user account screen saver still does not work. Something prevents the screen saver works in the created user accounts, but works perfectly under the administrator account. What could cause this problem? How to solve this problem?
Another interesting information. The same problem exists on a friends Lenovo T400s under Windows 7 Ultimate. His screen saver has worked a few days ago (week of June 21) but suddenly stopped as well. A windows update may have caused this problem?
Finally, I have not tested this, but it seems that hibernate/sleep has also stopped working. Unfortunately, I sleep/hibernation activate after 4 or 5 hours and I can't say for sure 100% that I let the computer idle for this period of time, but I could have sworn that I have.
I think screensaver and put into hibernation / sleep are all affected by the activities of intelligence and something is causing the machine to think that this is not idle. But under the Admin account, it works very well. I spent hours trying to understand this point, but without success. I have even restored to the point of thinking older restoration that something could happen, but it does not solve the problem either.
Help, please!
Brian
briboynyc and dougfulcher
I am so happy that I found this forum. About 6 weeks ago, I lost my screen saver on our computer brand new with windows 7. I was on the phone with HP in India twice and finally they decided to take back me to the factory restore thinking that it was because of our backup files in windows XP. Repeat all. I backed up all my files, and then we started again from the beginning. It's the same thing. We packed up the computer and returned to the store, a new computer and started all over for the third time. Last night is the same thing. I was really frustrated and thought maybe it was a little problem with windows 7 so decided to get on the microsoft Web site to see if I could communicate with someone from Microsoft. That's when I discovered this forum and started reading everything. When I read the answer of dougfulcher, he mentioned magic jack running in the background. We disconnected magic jack and that solved the problem immediately. I am really grateful and only wish I had discovered it before that I lived all this computer return and restoration. Everything seems to work very well. I hope this helps someone else.
-
HP Photosmart 5510e printer has suddenly stopped printing correctly
Original title: fault printer
Hello
I have a HP Photosmart 5510e printer that has suddenly stopped printing correctly because the black ink is not getting through. I did everything possible troubleshooting I can and replaced all the cartridges for new ones, but nothing helped. When I did a report print quality he had no black ink on it at all. This leads me to think that there may be a blockage between the cartridge and print head. Any ideas?
You might want to try this: failure of black ink Photosmart 5510 e-All in one series
Using cartridges HP no also could cause this kind of problem. Otherwise, it is usually a sign that the printhead is kaput, impossible to replace this printer print head if the printer is also kaput, on the garbage heap, it will! That's how it is with printers, you can either pay in advance for a printer expensive hard and has lower cost of Ink/toner replacement or you can buy a cheap and pay through the nose for ink replacement and in a year or two to mix the printer all out with the trash.
John
-
Original title: Windows Media Center has suddenly stopped being able to see tuners.
I am running Windows Media Center and have a 6 Ceton infinitv tuner connected to my network. Since a few weeks things have worked very well. Now suddenly after installing a faster wifi adapter, I get messages such as unable to find tuner or all tuners are busy... who don't feel like I can always go to the tuner by Explorer or chrome, by typing the address of it and it arises but also shows that it is set on the channels that I am no longer watching. Any ideas on why WMC is suddenly acting when the only thing I did was install an a6200 netgear adapter, nothing has changed.
Hi Eviln,
Please contact Microsoft Community. I understand that you have a problem with the TV Tuner card, I will surely help you solve this problem.
This problem might have occurred because of these reasons:
1 conflict between third-party applications.
2 driver corrupted or obsolete.
3. wrong settings.Try the steps listed here:
Method 1:
I suggest you perform a clean boot and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135/en-usNote: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.
Method 2:
If the problem persists, I suggest you to download and install the latest driver for TV Tuner card on the manufacturer's Web site and check if it helps.http://cetoncorp.com/product-support/
Method 3:
If the problem persists, you can see the steps in the following article and check if it helps.Watch TV in Windows Media Center: frequently asked questions
See the article for more information.
Get help for your TV tuner
http://Windows.Microsoft.com/en-in/Windows7/get-help-for-your-TV-tunerHope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
Maybe you are looking for
-
Received notice that my account is closed by Apple
I received an email "We notice that you do not use your iTunes account because a long time so we're abligate to close your account in accordance with our policy, including your email i-cloud also." Is it a scam? I buy via iTunes almost every month.
-
When I try to print anything on the Web, only the left part of the page will print, nothing in the middle right of the page display. It presents this when you preview before printing. I tried taking OFF reduced to fit and it still does not show the r
-
can I do my phone have a code number 5 or 6?
-
W520 light by fingerprint reader
I just got a new ThinkPad W520 to replace my W510 and notice that I can't turn on with the fingerprint reader. My mark leads W510 is green when I opened the lid and not lit the W520. I can log on to Windows by using the fingerprint on the W520 reader
-
Dynamically add cases to the other structure
Hi guys I have a simple ordering application. This ordering application now has only 4 basic commands and their corresponding enterprise value. But as we test the Council we want to send some arbitrators order and if this command works basically 'sav