When I reinstall El Capitan on a new drive, should I install device drivers?

Similar Questions

• Y560 with switchable graphics, what new driver should I install?

  There are 2 new drivers update for intel embedded graphics, one for the owner of KL2B and another for KL2/3 owner. I don't know what are the KL2B or KL2/3 means. which one should I install?

  Try the latest versions. If you have any problem with graphic cards, uninstall the drivers first, and then install the previous versions.

• I have CS5 drives that were installed on an old laptop which is dead. I would like to reinstall this product on a new computer. I installed the disks on my computer, but I can't activate the product. Can you help me get a new serial number?

  I have CS5 drives that were installed on an old laptop which is dead. I would like to reinstall this product on a new computer. I installed the disks on my computer, but I can't activate the product. Can you help me get a new serial number?

  As far as I know, Adobe won't give you a new serial number

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

• I started Windows 7 Windows 10 times Acrobat Reader updated to DC.  Now Acrobat Reader DC does not work and I can't reinstall.  The installer says newer version is already installed.  How can I fix it?

  I'm stuck in limbo.  I fell sick of the poor performance and constant crash of Windows 10 and back to Windows 7.  I was warned that I may have to reinstall some software and was pleasantly surprised when nothing seemed to miss.  Then I noticed that the new Acrobat Reader DC icon was just a white icon on the desktop.

  Of course, the reader does not open when I clicked it, then I went to uninstall and reinstall.  No go.  The uninstall program complained that he was unable to find the. MSI file in the path with the big ugly GUID in there.  I really care about the features of cloud of Document in any case, if I am I would like to install Acrobat Reader XI and finish with the DC version.  Again, no go.  The Setup program stops and a message that a newer version is already installed.

  Next, I tried to reinstall the CD think that Setup is trying to fix the Bjorked version on the disc.  No go.  Once again the installation program complained that a newer version is already installed and bailed out without doing something useful.

  So, I'm pretty damn good here because I can't go forward and I can't go back.  Windows 7 uninstall tool think I installed Acrobat Reader XI and when asked to uninstall it still trying to dive into the folder Acrobat Reader DC and can not find the MSI file he seeks even if lead by the nose.

  Setup of Acrobat Reader DC think that some superhuman drive versions are installed and will not install no matter how much I beg it.

  What should I do?

  Claudio,

  I have found cleaners and tried both version 4 and version 2 as Windows uninstall although I still have version 11 on my system, but could not uninstall it.  Even after using detergents and restarting, the installation of Acrobat Reader complained that it was a newer version of the PC alreadyon and came out of the installer.

  I finally decided to remove all records of Adobe in C:\ProgramData and that did the trick.  I was able to reinstall the version 11 player, and I think I'll stay with that after the nightmare of all clouds 'features' in Windows 10.

• I reinstalled Vista on a new hard drive and after installing the drivers Bluetooth, the icon will not be displayed in the control panel

  A few weeks ago my drive hard out crapped on me and I bought a new one. I installed Vista on it and thought that I installed all the drivers. Yesterday, I had to use my bluetooth and noticed that it has not been installed. After knowing that I need a patch for it, I was able to connect my phone to my computer. But now the icon is not in the control panel so that I could easily adjust settings or view paired devices. I can only adjust the settings of the icon in the bottom left of the taskbar. Whenever I try to view paired devices I get the icon of waiting and then nothing happens.

  Macuahuitl salvation,

  Ø what service pack is installed on your computer?

  If you don't have SP2 on your computer, you may not be able to see the icon in the control panel. Try to install SP2 on your computer and check the status.

  OR

  You can uninstall the device blue tooth from the Device Manager and restart the computer that will install the generic drivers, then check if the icon is listed in Control Panel.

  Please post back the result.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have vista 32-bit, he sees not my new drive hard hitachi, in device manager it shows that it works correctly?

  Why my expoler does not see my new drive hard when it is in the device as o.k. Manager.

  Look for the drive in computer management, it may need to assign a drive letter.

  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

• Lost keywords when they are copied photos to a new drive.

  I just copied about 500 GB of photos from an external hard drive to a WD MyCloud device so I could access it from multiple computers.  Imported all back in Lightroom, which took hours and hours to be able to build new insights Standard.  In the process seems to have lost all of my keywords.  All other metadata seems to have transferred pictures, but the key words are not there.  I'm not sure it's a matter of Lightroom, so if I need to approach this also please leave me know where.

  Thanks for any help on this.

  I use Lightroom 5.7

  HP desktop PC

  Windows 7

  In the future, to move the files in Lr (or place in the BONE and then move to Lr - if you are doing a great set with a common root..). i.e. do NOT re - import.

  PS - If you have recorded (xmp) metadata before re-entry, you have lost your key words. If you do not save the xmp metadata, Lr stores keywords in the catalog only and spread them when the photos are removed from the catalogue, i.e. If you re-import...

• Reinstall windows xp on the new drive

  Hi, I replaced my hard drive on a M55 desktop due to depletion of the room.

  I have my recovery CD to reinstall everything.

  I have all my files that I need backup on an external hard drive.

  A clean install would be best?

  Yes it should, (and probably faster than with an R & R).

• I found a new driver package Windows installed in my computer of Silicon Labs Software

  I don't know what it is for.  Can I remove it?

  Windows Update would only install a package of drivers for hardware that is located on your computer. Silicon Labs is a NASDAQ legitimate listed developer material even if not known directly to the components of the PC. However they produce some, for example the USB controllers.

  The situation is also confused by the different companies, they bought so it can now be labeled as SL when the material has a different name.

• Obtaining of S.M.A.R.T. error when you try to reinstall El Capitan

  Bought end of 2012

  Model: iMac 21,5 "

  Version: 10.11.4

  OS El Capitan

  Recently, I deleted the data on my hard drive in the hope of "reset" of the computer to its factory settings. Clear data wasn't a problem, but the reinstallation of the operating system has become a challenge. The computer is not very old, and it has worked very well before erasing the hard drive. But now, when I reinstall El Capitan, I get an error message that says: "this disc a S.M.A.R.T. errors. This drive has a hardware problem that is not repairable. Backup of data as much as possible and replace the drive. »

  I feel like the error message is incorrect because it appears only now after I erased the hard drive... I was wondering if anyone else has had this experience, and what tips or tricks you could give? Thank you very much.

  

  Why don't you have confidence the message?

  SMART is a system of industry standards designed to predict hard drive failure. SMART errors can be triggered at any time, indicate that the player is under-performing and will probably fail soon.

  It is not related to erase you the drive - the chances are that the INTELLIGENT warning appeared quickly when you use the drive normally. It * is * possible that a full erase of drives insisted on the drive that has highlighted (perhaps even accelerated) the problem, but it would have occurred as soon as look at it and the warning should be taken seriously - the drive is likely to fail quickly.

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• Can I install Windows XP on a new drive with the product key only?

  The hard drive on my HP desktop computer failed and died.  I don't have a recovery disk.  Can I reinstall windows XP on a new drive as Windows XP product key is located on the cover of PC.  If so, how?  Any suggestion please!

  With the procuct only key?  No, you cannot, the product key is just a combination of 25 alphanumeric characters, where the installation files will come from?   You will need to contact HP for a recovery disc.

  John

• I can't clean reinstall my version of vista because my cd/dvd drive is not installed in my bios boot priority. Please can you help me solve this problem?

  (cd ide) not installed in my bios boot

  I can't reinstall clean my version of vista because my cd/dvd drive is not installed in my bios boot priority please can you help solve this problem

  You added a new drive?

  All the drivers are up to date?

  Check the cables for loose connections.

  Is it possible for you to do the following to reload the original Windows installation files?

  Start > all programs

  Select Samsung

  Samsung Recovery Solution

  Select "full restoration".

  -or-

  Restart Windows and the Samsung logo starts pressing F4 to access the recovery screen

  This is a known problem in Samsung - see document - links products are not good

  http://support-US.Samsung.com/Cyber/Popup/iframe/pop_troubleshooting_fr.jsp?idx=43092&modelname=SV0411N&modelcode=

  It is Support Center of Samsung - Re: HDD no detect does not issue

  Click Troubleshoot utility (PS there is a pop up window)

  http://www.Samsung.com/global/business/HDD/

  Samsung also recommend OnTrack Disk Diagnostic. You can make a bootable floppy to advise data with this:

  http://buyonline.Ontrack.com/ecom/fr...file=DC500.exe

  And here is the other programs from Samsung. The creator of the Manager of disc is really of Ontrack and hosted by Samsung. It should work with any brand of hard drive.

  http://www.Samsung.com/Products/Hard...file/Sutil.exe
  http://www.Samsung.com/Products/Hard...Ile/SHDIAG.exe
  http://www.Samsung.com/Products/Hard...il_creator.exe
  http://www.Samsung.com/products/hard...DM_Creator.zip

  (Disk Manager link was not on the Samsung website with the exception of one who asked for the story of your life, but in trying different possibilities with links leading to other files, I finally found one that allowed a download without having to give everything and personal information.)

  ___Taken from the following thread - Elvandil response
  http://forums.techguy.org/all-other-software/254208-Samsung-HDD-utility.html
  
   

• How to install windows on the new drive?

  Hello

  I have a HP Pavilion dv7-3080, which came with Windows7. Now, I bought a 120 GB SSD. I tried to install Windows on the SSD by selecting Factory Reset. However, I get the message that the size of the hard drive has changed and that's why I can't use Factory Reset.

  Is there a way how can I use the Windows7 that came with my laptop and install this on my new drive!

  To my knowledge, I am not break everything right since Windows7 came with the laptop and was part of the price I paid for the laptop.

  Kind regards

  Sja785

  Hello:

  Partitions or recovery discs do not work on a smaller hard drive.

  You need to install a simplified version of windows 7 on your SSD. You will not break the laws or rules of license by using the product key on the bottom of the PC to activate the installation.

  However, if you can not read all 25 characters of the product key you are flat out of luck and will have to buy a new operating system.

  Here's how to make your own simple Windows 7 installation disc if you have not already.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• If I create an image of my windows 7 hard drive, should the new drive size match the old drive?

  I want to create a backup of my hard drive that has windows 7 on it.  Do I need a hard drive of the same size or can it be smaller?  I want to put the hard disk image is smaller but still would have enough space for all the data on my computer. Thanks for your help!

  Hello

  Welcome to the Microsoft community.

  I want to let you know that the free space on the new drive should be more than the size of the backup.

  Back up and restore: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Back-up-and-restore-frequently-asked-questions

  Let us know if you need assistance with any windows problem. We will be happy to help you.