Long-awaited problem, really need help.

Similar Questions

• I really need HELP! I received the nugel.exe virus on my laptop and I really missed the whole system! PLEASE HELP ME SOLVE THIS!

  I really need HELP! I received the nugel.exe virus on my laptop. I have Windows XP and I was reading how to remove it. They told me to go to click on the Start button in it, then click on run. type msconfig and on the Startup tab, uncheck everything that ends with TSSD. Well, none of which ended in TSSD was there, so I was told everything that had an UNKNOWN manufacturer in buttons SERVICES and STARTUP uncheck. I restarted my computer and the NELSON was always there.  Then suddenly my computer shut down on its own and restarted with a screen that says now "Windows didn't start because the following file is missing or corrupt: \system32\hal.dll .» Please reinstall a copy of the above file. "Does anyone know how to do this? I feel that I've dealt with the virus stupid for days and I'm going crazy! Can someone please help me solve what I did wrong? PLEASE, I BEG YOU!

  Hi ehaze64,

  Looks like you have made incorrect changes in system configuration utility.

  See the Microsoft articles below to solve the problem by installing the recovery console and use the Bootcfg.exe tool to rebuild the Boot.ini file.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

   

   

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

   

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PLZ I REALLY NEED HELP!

  Please someone help me, when I go to 192.168.2.1, this appears and I can't connect to the internet.

  Type of connection: State of PPPoE connection: Internet connection IP address: 0.0.0.0 subnet mask: 0.0.0.0 default gateway: 0.0.0.0 DNS1: DNS2: DNS3: MTU: 1492

  Can someone help me please, I really need help, parents are really crazy, and they think it's my fault.

  Is this a good solution? I went to 192.168.0.1 and changed a bridged network connection. Then I connected back the WRT150N router on my computer and the modem and everything works fine now, even some of my fixation with my ISP disconnection problems! The only problem is, my internet is slow, it used to be 1500 Mbps download speed and now it's down around 800-900.

  I mainly use a bridged network share. Would it not slow? And this correction will be permanent?

• Really need help (presario v3828au)

  Hello

  recently I formatted my laptop using the xp disc, no cause of recovery partition, I don't have... now I got a problem to get the drivers for my laptop... I have check the driver download driver software HP but n all drivers are not included on this page...

  Hopefully, someone can help me get all the drivers... I really need help bcause im a beginner... My laptop is Compaq Presario V3828au...

  Thank you..

  Mariza in the post above you just gives driver to it.

  It's a Broadcom Wireless card (with BCM1395 chip).

  If this driver does not work, try this and present one.

  So finally a work of shpuld to 100%.

  Message edited by Daniel_Potyrala on 05/17/2009 15:28

• Hello. Really need help.

  I'm doing a game right now. When you finished with success the current level, it should unlock the next level.  I've been Googling since this morning and tried to use SharedObject, but it does not solve my problem. I really need help please! Can someone please give me an idea on how I can do this? >. < Thank you.
  

  It depends on how you load your levels.

  If you attach an event listener to Buttonbs who are in charge of your level, you may

  Add sth. as

  function init (): void {}

  var maxLevels:int = int (showCookie ());

  var totalLevels:int = 4

  say it returns '2 '.

  for (var i: int = 1; i<>

  If (i<>

  getChildByname("level"+i).visible = true;

  }

  else {}

  getChildByname("level"+i).visible = false;

  }

  }

  }

  and in your MouseEvent.CLICK, startLevel you add all the buttons

  you write sth. as

  function startLevel(e:MouseEvent):void {}

  var levelLoader:Loader = new Loader();

  levelLoader.load (new URLRequest ("level" + e.currentTarget.name.substr (5.1) + ".swf");)

  }

• I have the windows product key sticker, but some of them are deleted. I really need help to send a photo to show him what it's like.

  Original title: product key

  Hello

  I have the windows product key sticker, but some of them are deleted. I really need help if I can send a photo to show him what it's like. I formatted my laptop and he asks the authentic copy. I really need help coz 2 days left to activate.

  Thanks in advance

  Best regards

  You can extend the activation period of 30 days by running slmgr /rearm since the Admin command prompt.

  Then take a picture of your COA sticker with your phone, blow as large as possible to try to detect all the characters input for Activation.  You can also use a magnifying glass.

  If you can not use the key to product then you will need to either the order of the restoration of the factory of the manufacturer of your PC media, or if you have a C:\windows.old folder you can try to reinstall the factory to SLP activation file.  However we do not support this so you will need to search on your own.

• Hi, I really need help... I can't find any broadcasting EBU-100/75, test your 1 KhZ, etc... I m going to do 15 masters short for Swedish broadcasting channel at night. -haha! and I can't find anything inside the first... I m I'm blind! Help, please! Vanle

  Hi, I really need help... I can't find any broadcasting EBU-100/75, test your 1 KhZ, etc... I m going to do 15 masters short for Swedish broadcasting channel at night. -haha! and I can't find anything inside the first... I m I'm blind! Help, please! Paris looks Jokum

  Bay3Bob - you are great! Thanxxx :-)

• Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  800-833-6687 (the only one from 05:00 - 19:00 PST, Monday to Friday day US).

  Phone support | Orders, returns, exchanges
  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Hello, I'm testing creative cloud, I really need help to know which module to install to create simple web pages

  Hello, I'm testing creative cloud, I really need help to know which module to install to create simple web pages

  Hi Cyril,.

  It depends on what you want to do. If you have experience with coding, you can download Dreamweaver to create Web sites by using the two code + design of knowledge.

  With Muse, you can design beautiful Web pages and Muse will generate the code for you.

  I hope this helps!

  -Emily

• Bluetooth problem on my new laptop HP Pavilion G series and really need help!

  I recently bought my new laptop and yesterday when trying to send a picture from my phone to it, files have not been sent, even though she said the phone and the laptop were connected, he mentioned something about Image push, but I am new to HP, so I'm not aware of what exactly is and desperately need help Please could someone help me with this, I would really appreciate that I could not yet send the file via bluetooth. Thanks in advance!

  D3,

  You said,

  "bluetooth device has not been successfully installed.

  You said,

  ""photo from my phone it it was settled, but it says ' unable to connect ' "." "

  I'm a little confused by what you say, but I do not understand 'unable to connect '.

  • It's time to go back to information I sent you and go through the installation program.
  • You can also use the HP connection manager to help you get the job done.

  Here is the Connection Manager software.  Download and install it.  Your computer already has the software, it's going to tell if the package will install...

  HP sp54945 V4.1.25.1 Connection Manager

  Once the software is installed...

  And you want to use the HP Connection Manager software.

  • Make sure that your wireless network is enabled,
  • Then look in your taskbar for your Connection Manager icon and
  • Double-click to start

  If you do not see the icon in the taskbar, you can do the following:

  Start > search / type "HP connect" >

  Click on 'Hp connection manager' when you see it in the start list

  This is a HP Connection Manager Help file.

  The document explains how to use the software to connect your Bluetooth devices (and wireless):

  Connecting to a network with the 4.x connection manager

  Good luck!

  ----------------------------------------------------------------------------------------------------------------

  When you appreciate the effort...

         Please click on the Star Bravo on the left to tell "thank you"! ""

      Is it solved? Make it easier for other people to find the answer:

  Please Mark my Post 'accept as Solution' to say "Yes!"

  Remember: the more information, help, best you , you can receive.

  Always include: (Notebook) product number , printer - model number ,.

  Operating system and a Description of the error

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• I really need help serious to import again

  OK, I'll start by saying Iam a newbie total and complete this field.  I have made a few small projects first and again but nothing advanced so far.

  Here's what I did

  • I use CS04 Suite
  • I built a first project using video AVCHD which is long (about) 2.5 hours
  • I exported the final project using SOUL to the H.264 format so I could import into Encore
  • The file is 16 GB in size

  I try to import the file as an asset in again to create the menus, I need to create 2 images in still, a DVD image and 1 Image Blueray.  I'm doing the image of the DVD at this time.  Still allows the import, shows the video in the list of assets, but my hard drive works like crazy for three hours now, I can't drag it to the timeline, if I click right I can not even access the setting of transcode the file, my system is very slow.  It almost seems that it is pre-transcodage but I don't see any progress anywhere bar.

  • Is still just importantly the file?
  • I am doing this correctly?
  • Should I break to the top of the video into smaller files? Can I create several Projectes first to do this?
  • If I wait long enough will he be ok?

  I have 6 days to finish this project... I really need your help!

  A hard disk will not work well for the SD video and certainly not for HD video

  A link with a lot of ideas on the computer to install http://forums.adobe.com/thread/436215?tstart=0
  And even more discussion material http://forums.adobe.com/community/premiere/hardware_forum
  Including this message about 3 possible builds http://forums.adobe.com/thread/598040?tstart=0

  You need at LEAST 2 hard drives, one for OS and software and all data... and a lot of people use a 3rd drive for temporary files "scratch."

  These are separate, physical hard drives... NEVER of partitions on a disk

  Work through all the steps (ideas) at the http://ppro.wikia.com/wiki/Troubleshooting
  If your problem is not solved after following all the steps, report accurately the requested in the section, the questions at the end of the troubleshooting link... especially the codec used... See Question 1

  You have already given the type of file... all the other information is good also

• Fs9 not opening - identified problem but need help repair

  I want to thank you in advance for your time. I am trying to install and play flight sim 2004 on windows 7 - a x 64 sys - and when I open fs9.exe splash screen or anything really fails to display.

  I think that is the problem, is that there is no record of FS9, under the %appdata%\Windows\ that basically, I need help trying to solve. Is there anything I can download to replace this file? Or am I just looking in the wrong place.

  Also, I installed it in a different directory, not the directory Program Files (x 86) but rather just C:\FlightSim\

  Hi Jordan,.

  The game does not appear to be installed according to the description of your problem.

  I suggest you log in as administrator or right click on fs9.exe file and run as administrator.

  I think that this is precisely the reason why the FS9 folder does not appear in c:\users\explore \appdata\local\Microsoft\windows\game.

  If this does not work, I suggest that you look into other aspects as well. Follow the steps below.

  Method 1:

  Update display drivers . The flash on the screen could also be because the display drivers are not updated. I would recommend you visit the manufacturer, download and install the latest display drivers for windows 7.

  Method 2:

  I suggest to disable UAC and then try to install the game.

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.

  Method 3:

  Temporarily disable all security software and try to install.
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, then I suggest that you post the question in the Microsoft Flight Simulator Games Forum for further assistance.

  http://www.fsinsider.com/

  FOR INFO:

  Flight Simulator 2004: Known video issues
  http://support.Microsoft.com/kb/823628

  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I really need help for after effects cs5

  Can someone help me with this please. My once effects cs5 gives me this problem it hangs on initialization of the engine type. I wasn't like this last year but this year it appeared this way please help I have a major project of College ends please . I've updated to the latest version but problem still appear. I have also uninstall and used clean Script / utility but still no change. If someone out there could me sitting with this problem God bless

  You have a "bad". Remove all the fonts which you do not currently need and added recently, then try again. If necessary, remove all the fonts down to only the default fonts of operating system, and then selectively add additional fonts only when you really need it.

  Mylenium

• BlackBerry Smartphone Bold 9790 problem! Need help

  So almost a year ago, I bought a 9790 "BOLD" of Blackberry. The last two months it should automatically restart all the time. Overtime, it would get worse and worse. He would get to the point where, whenever I would call or send a message, it would be turned off. Yesterday, it was on the morning and off around 9. He lit once around 11, then it does not turn on the rest of the day. I have notes on my phone that are very important to me, and it no longer turns. Sometimes things would turn that plugged while, but once disconnected, it would be turned off. Now, plugged or not it lights. Sometimes the red lights, as it usually did when it restarts on its own. I tried to unplug battery and tried different ways to make it work, just long enough to send the notes which are important for me, for my email or something.
  
  I need help make at least on for a couple of minutes, or in order to get my notes in a safe spot.
  The notes are saved on my SD card? In which case I could just take off and get them?
  Please help me

  Have you tried to replace the battery?

  Only the media (pictures, videos, etc.) are stored on the SD card. Everything is stored on the device. That's why you should make backups using Desktop software and/or activate BB Protect.

• Hey I really need help

  hey I really need your help, I lost my "square transform" all about objects, I can´t turn them more Please someone help me!

  

  Erick,

  How about Ctrl / Cmd + Shift + B?