The list of results in TS2013

Similar Questions

• The miniature display of the image in the list of results?

  Example of Image URL:

  https://fileserver/picture

  
  In short Studio 3.0, we are able to view a thumbnail of an image URL in the "list of results' components by setting the value of"set the URL of image preview for each record"to" ${imgURL} "in the section"display of Image ".

  However, short Studio 3.1, I am not able to make it work. Can anyone help? Thank you!

  Hey, Brett,.

  I managed to solve the problem. I need to set it as "{{imgURL}}" that will tell Studio is not to code a hyperlink setting. Cannot use '{imgURL}.

• Include as the value of the clause in the list of results

  I have several similar terms on the same column in my query. Is it possible to include the value of the clause type in the result set?

  For example

  SELECT * ADDR ADDRESS WHERE

  addr. Line LIKE '% 1% '.

  OR addr.line LIKE '% 2 '.

  OR addr.line LIKE '% 3% '.

  OR addr.line LIKE '% 4% ';

  The result set contains all the addresses including ONE, TWO, THREE, FOUR. Now, I would like to see the result defined as

  Address1ONE | ONE

  Address2TWO | TWO

  THREEaddr | THREE

  any clue?

  R

  Use CASE:

  SELECT addr.line,

  CASE

  WHEN addr.line LIKE '% 1% ' THEN 'ONE '.

  WHEN addr.line LIKE '% 2% ', THEN 'TWO '.

  WHEN addr.line LIKE '% 3% ' THEN 'THREE '.

  ELSE 'FOUR '.

  END

  The ADDRESS ADDR

  WHERE addr.line LIKE '% 1% '.

  OR addr.line LIKE '% 2 '.

  OR addr.line LIKE '% 3% '.

  OR addr.line LIKE '% 4% '.

  /

  SY.

• Go to the list of the results of the main sequence in my plugin...

  Hi guys,.

  OK, first post here, but I'm a little stuck. I am writing a plugin model to generate a custom HTML report (my requirement has a very specific layout for the report, which is not at all compatible with the html reports generated by teststand normally). Anyway. I generated all labview code, I want to make the report in the format I need, but I'm really bad at actually get information of teststand in a way that is easier.

  What I want to do is browse through the list of the results of the main sequence in the callback sequence DUT-Done of the sequence of pluging, which is stored in

  Parameters.MainSequenceResult.TS.SequenceCall.ResultList according to the documentation, but how can I really access it as a table I can go? All I have in my list of parameter is a reference to the parameters. MainSequenceResult, and for the life of me I can't work out what to call this knowledge actually just get it into a format that I can then use to browse in a loop "foreach" to get out of these settings.

  I'm on a windows machine and teststand 2014 7.

  Any help you could give would be really appreciated!

  J

  The list of top level result is: Parameters.MainSequenceResult.TS.SequenceCall.ResultList

  To find it, I dragged Parameters.MainSequenceResult in the Watch window to a breakpoint and developed it until I found the list of results.

  The ResultList is a PropertyObject which is an array of containers, so as the methods GetPropertyObjectByOffset and GetNumElements are going to work on that.

• XML format for the export of result set by the user

  Hello

  I would like to export my entire test sequence results in a new XML file. The format of the XML file is given and fixed.

  My first attempt was to create a LabView VI to export data in XML format.

  I read that there is no way to set the format with the standard version of LabView. But I have a suspicion that there is an upgrade so I can set the XML format by myself.

  Does anyone know what update I need?

  Or did someone knows how to export XML in a different way?

  Thanks for your help!

  You're right that the current implementation does not do.

  You have two options:

  1. create your own plugin that analyzes your resultlist and generates the XML file

  2. create something late MainSequence which analyses the resultlist and generates the XML file

  It depends on the scope of your project.  If there is one thing to type 1 and then option 2 would be easier.  If it's something, you use through multiple tests and then I'd go with Option 1.

  In both cases, you must go to analyze thorugh the results list and generate code for XML.  I recommend keeping the algorithm in TestStand to browse the resultlist.  It is much easier and simpler.  Simply create a sous-suite that does and pass the list of results.

  Kind regards

• Web App search results to display the TASK parallel library instead of the list view

  Is it possible to get the search results Web App to view a presentation BPD instead of the standard list view?

  If it is possible the call would go on the form or on the page of results? (currently, use the same results page for several web applications.

  Thank you!

  Not quite sure what your after.

  You can send the results of research to a custom page, I think you did that? This page can have its own model.

  The module itself for the search results:

  {module_webappsresults, bkp, resultsPerPage, hideEmptyMessage, rowLength, sort}

  They are key elements where bkp being true means that search results will use the backup of the web application on the main list.

  If you apply the rule of custom template by adding a space and a model = "PATHTOFILE", you can specify the search results to use a custom template.

  http://helpx.Adobe.com/business-catalyst/partner/using-custom-templates-modules.html

  None of this is what your after?

• Set the number of results per page in a static list

  Hello
  
  I use Sitestudio 10 gR 4. If I use a dynamic list item, I can set the number of results per page. Is it also possible, if I use a static list?
  
  Thank you
  Brahim

  With any list, you can create another element and ask the contributor to enter the number of items to display. Then, in your region model do use list data and this other element to display only x number of items in the data list.

• I uninstalled norton sec., but it always appear in the list when I press start. as a result, I can't install kasperky, what can I do?

  I uninstalled norton sec., but it is still present on the list when I press start. so, I can't install kasperky dry what can do to remedy this?

  Hello

  Download and run the norton removal tool

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  If you then still problems contact norton

• Link to shift + click on the Google search result

  How can I open new tab/windows by link shift + click on the Google search results?

  It is the way in which Firefox opens the link.

  My current setting is Ctrl + click opens a new tab in a new background tab, shift + click opens the link on the same page.

  Firefox 40.0.3 Windows XP

  For the Google site, you can set preferences on the Google page via the top gear icon to the right of the results, click this button to open the list of menu and select search parameters.

  • http://www.Google.com/preferences?hl=en

  Where results open: Open search results in a new browser window.
  

  Google settings are stored in a PREF cookie on your computer, you must create an exception to allow him to keep cookies for Google to save settings, otherwise you will have to repeat.

• On my old e-mail account I could insert a list of addresses by putting the list name in the to: my new email account will not accept the list names. How can I fix th

  My old Thunderbird e-mail account has been with Time Warner,
  SC. RR.com. my new second account) is with AT & T, ATT.net.

  In my old account I could give a name to a list of multiple e-mail accounts, put the name of lists at the BBC: and send email to everyone on the list.
  My new account will not accept the name of a list. He insists on the format of a single e-mail account. I tried to create a new list after closing the old account and open the new one, but the results were the same.

  How to make 'list' to work on my new ATT account?

  I'm glad to hear that your problem has been resolved, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

  Please contact the Mozilla Support!

• Downloaded new itunes now iPod not recognized. Uninstalled and reinstalled. No sign of the driver on the list of devices iPod win 10. Tried the other fixes - what do I do now?

  With the help of Windows 10. Downloaded latest version of iTunes (should have been better). Now iPod Nano not recognized. Tried to uninstall and reinstall iTunes without result. Check the list of device driver - no sign of the iPod device driver. Read various tips listed here, but nothing seems to work. How can I get the driver?

  Douglas

  The 'driver' is here.  It is part of the installation of iTunes.  When you connect it, the iPod screen indicates it is connected, by showing 'do not disconnect' or 'Connected' or another indication that there is a data connection with the computer?  If it shows that the battery symbol, there may be another problem that requires no software and 'drivers '.

  If the iPod has a data connection (but he does not appear in iTunes), you can use the procedure to completely uninstall iTunes and associated software components.  Can you only uninstall iTunes.  It's the Apple procedure, listing the components uninstall and uninstall specific order

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  After you have uninstalled all parts of the installation of iTunes, download and reinstall the latest version available

  https://www.Apple.com/iTunes/

• column of file missing in the bookmarks search results

  In the library of all bookmarks page, when you search for bookmarks, the returned list does not record information. When I find dead links, I would go to this bookmark folder to see if there are any more stale bookmarks that are. I guess that more people use tags as the folders and subfolders to sort their bookmarks? For example, under Science, I have astronomy, physics, etc.

  column of file missing in the bookmarks search results

  Install the "Show Parent folder" and (also useful) extensions "Go Parent Folder" for what you want, you want to really read the knowledge base article.

  Sorting and rearranging bookmarks - Firefox (and in collaboration with bookmarks)
  http://KB.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

  • SortPlaces
    sorts ALL of your bookmarks in 3 to 6 seconds, suggesting we do not do automatic sorting
    https://addons.Mozilla.org/en-us/Firefox/addon/SortPlaces/
  • Go Parent folder
    Locate the folder of bookmarks to a bookmark in the bookmarks search results
    https://addons.Mozilla.org/en-us/Firefox/addon/go-parent-folder/
  • View the Parent folder
    Adds a column to the library list ('Ctrl + Shift + B' > View menu)
    https://addons.Mozilla.org/en-us/Firefox/addon/show-parent-folder/

  For more information about the extensions I use, see
  
  http://dmcritchie.MVPs.org/Firefox/Firefox.htm#ext_table
  For more information on keywords shortcuts, see
  
  http://dmcritchie.MVPs.org/Firefox/KWS.htm

  If it solves your problem, please mark it as resolved.

• Mail OS 10.11.4 shows not contained in the list of the mailbox

  Hi, since I have updated my MBP (early 2011) to OS X version 10.11.4 display the folders in the list of the mailbox is empty (see example below). I tried to find a solution and did a search on the Internet, but with no recourse yet. How to solve this problem?
  

  Please stop Mail. Force quit if necessary.

  Back up all data before proceeding.

  If you use OS X 10.11 ("El Capitan") or version later, triple - click anywhere in the line below on this page to select:

  ~/Library/Mail/V3/MailData

  If you use an older version of Mac OS X, use this line:

  ~/Library/Mail/V2/MailData

  Copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to folder

  in the menu bar. Paste in the box that opens by pressing Command + V, then press return.

  A file window opens. In it he must be files with names as follows:

  Index of the envelope

  ExternalUpdates.storedata

  Move these files to the desktop, leaving the window open. Other files in the folder can have names more long that begin as above. Move these files, if any, in the trash.

  Mail recovery. It should invite you to re - import your messages. You can get a warning that the index is corrupted and that Mail must quit smoking. Click OK. Generally speaking, the process takes a few minutes, but this can take hours if you have gigantic mailboxes. In this case, you will be able to speed things up temporarily by adding your file to the list of personal information protection in the Spotlight preferences pane. Remove it when Mail has finished importing.

  If the import operation stalls or fails with an error message, quit Mail, delete the two new index files (maintenance of the original that you moved to the desktop) and try again. According to several reports, the second attempt can succeed if one does not.

  Test. If Mail now works as expected, you can delete the files that you moved to the desktop. If not, post your results.

• By clicking on the Google search results within a framework gives white screen

  Back to this story is that I use Firefox and I use a simple frames home page where my fave links (ebay, craigslist links primarily) are on the left of the screen frame and google opens up on top of the right frame. When I do a google search, it does what it does and gives me his search results. Normally, when I click on one of the Google results the rest left image and the right will go to the link I clicked on. Not today, if. All I get is a blank screen and in the status bar. The left frame is still there. In this case on 2 computers. That is to say, doesn't have a problem. Is Google? Firefox? Or a combination of both?

  Here is the code for my main frames page. I don't need to register a 2nd.

  1 htm

  This has happened

  Don't know how many times

  == May 25th, 2010

  Try to clear your cache and cookies.

  1. Open the Tools menu, then select clear recent history...
  2. In the time range to clear: drop-down menu, select all.
  3. Click the arrow next to Details to display the list of items that can be cleared.
  4. Select Cookies and Cache.
  5. Click clear now.

• Retrieve the list of available control values IOName/IVILogicalName

  Is it possible to programmatically retrieve a list of all values of an IOName control (or more precisely IVILogicalName in this case)? I refer to the list of values that appears when you click the arrow on the menu drop-down control. For example, if I set the control to NO-SCOPE (IVI select class-> IviScope-> niScope) from the drop-down list shows only the names of the bodies that are present (for example, "PXI2Slot6"), including the sessions 'duplicate' (e.g. ' PXI2Slot6 (1) ").

  
  I can get the value currently selected control quite easily, but I would like to get a list of all available values. Is this possible? Values are just there in the control as surely there must be a way to access.

  My goal here is to find a way to recover all sessions IVI and then close them. If there is another way to do this, I'd be happy to hear it.

  Some related posts, I found:
  https://forums.NI.com/T5/instrument-control-GPIB-serial/close-all-open-IVI-sessions/TD-p/1752560
  https://forums.NI.com/T5/Digital-Multimeters-DMMs-and/what-is-the-proper-way-to-close-all-open-Sessi...

  DropDownList (with VI active scripting)

  I use it to find niDMM you can modify it to work with niSCOPE by changing the

  IVI of the results matrix class

  

  I use this for VISA