Long the woes of the time, my head hurts.

Similar Questions

• long the time loop

  Hello

  I want to run the loop for a long time in my application.  If I do it in a few seconds I get a warning message like "Script of this film do flash player to run slowly. you want to cancel the script. " How to overcome this. Please tel me how to overcome this.

  Kind regards

  Kelifaoui has

  file - > settings-> flash-> Script Date tab limited publication (change this)

• How can I configure Time Capsule 3 to and Motorola NVG589 to access the Time Capsule backup drive?

  I have ATT Uverse service and am ok with the performance of the WiFi of the NVG589. I want to configure my Time Capsule 3 to extend the network and be able to access the drive for backups Time Machine. I think I am following the steps in Airport utility, but once installation is complete I can find is no longer the time Capsule.

  I want to configure my Time Capsule 3 to extend the network

  The time Capsule cannot "extend" the network Uverse using a wireless connection, if that's maybe what you're trying to do. The time Capsule can only wireless "extend" the signal of another router from Apple.

  The Capsule can be configured to extend the network to Uverse if it is connected permanently... anytime... to the Uverse router using a connection through wired Ethernet cable.

  Please specify on what you're trying to accomplish, so that we can provide the correct steps.

• clock in the notifications box no longer displays the date beneith the time

  Series HP Pavilion HPE h8 - 1360t running Win 7

  When I ran Setup and decided that I needed to install the software, I notice that the date is now displayed in the tray under the era.  I was happy that I is no longer my clock application to display the date.

  Now that I've installed all the updates and my usual software, the clock in the notification area displays only the time.  The date seems to have disappeared.

  I don't know what I've done or installed to make it disappear.  I can't find a way to recover.

  Is there a software switch somewhere that turns on the display of the date of the clock?

  Normally, the 'taskbar' are a height of 'one'... the time is displayed. If you unlocked the "taskbar" and stretch up to a height of 'two'... the time, day and date will be displayed. Thereafter, be sure to lock the taskbar to prevent change.

  Please send Bravo

• Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  You should take a look at your startup programs and decide what is really necessary and what is nothing more than useless clutter. There is nothing wrong with the startup programs, some may be really useful or even necessary for your personal needs. But keep in mind that many programs build to start when you start the computer and that most of them must not start when the computer starts, all they do is slow down your boot time and clutter of things when you're trying to solve problems, and some are downright harmful!

  I mean, have you really need things like real Planner and Gadwin Print Screen running all the time? These programs will run very well, even if they are not started automatically every time that you start the computer. Go to these programs and change/disable their boot option. Some may be difficult to kill for public assistance services can be useful when you try to control startup programs. Try CodeStuff Starter, it's safe and easy to use, I think you'll like it, download it here:

  http://CodeStuff.tripod.com/products_starter.html>

  Use AutoRuns to check axis start, Richard:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

  Use Cclenar-> tools-> start

  http://www.CCleaner.com/download/builds.aspx>

  I can't tell you what to keep, startup items it is a personal preference, but pretty well all the startup items indicated by CodeStuff Starter are safe to disable, and changes are easy to reverse if you change your mind. Searches for items it shows you and decide whether or not these things are really useful or necessary. Some programs will be started at startup without your knowledge and over time, that list can expand to include useless parasites, part of good computer maintenance includes regular control of these startup items and the removal of the unnecessary.

  Suggest that you first spread malware as the cause of the problem by following these steps:

  I. - delete your temporary files

  Clean the system (compensation to all temp/tmp folders and included all the content offline, the tif browser, delete the cookies of compensation.)

  Do a disk cleanup. Click the Start button. in the search box, type disk cleanupand then in the list of results, click Disk Cleanup. Better and easier to use - ccleaner.

  Download the basic version (slim) via

  http://www.Piriform.com/CCleaner/builds>

  The basic version (slim) does not contain the toolbar disgusted

  DO NOT USE ANY cleaning of the advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.

  Reset

  II. - have your system scanned as a result of security/antivirus installed.

  III. - download, install, update and run both of these tools to a-squared free scans:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  UTC/GMT is 18:16 on Wednesday, January 18, 2012

• How the taskbar to view the Long format of Date and time? I know that I can click to see, but I want it appear constantly.

  Can someone guide me through these steps.

  1. right click on the bar of tasks then UN -lock the taskbar if there is a tick against this setting.

  2 place your cursor on the top edge of the taskbar until it turns into a two-headed arrow, and then click on & made drag as if you were dragging the edge of any window.  By making the taskbar more fat, you will see the format switch to a view of three lines: hour, day of the week, short date.  This is the best that this point can do on its own, so I don't think it will satisfy you.

  3 you can then upgrade by clicking on the time in the taskbar, click on change date & time..., Date & time tab, click change date, time, Date & settings dialog box, click on change the calendar settings, in the entry for the short date format, enter what you want as DD MMMM yyyy then OK OK, OK, OK.  The taskbar happily modified displays short date in the format.

  4 you can easily try then reset then using the reverse procedure, if you decide that the display of three lines is worse than any date not having do not at all.

• If Im pretty well shut down all my freelance work now that my job is very time consuming so I need is no longer the creative suite on my laptop, but my wife who is a teacher, he needs. We want to take advantage of the lower prices for teachers and studen

  If Im pretty well shut down all my freelance work now that my job is very time consuming so I need is no longer the creative suite on my laptop, but my wife who is a teacher, he needs. We want to take advantage of the lower prices for students and teachers are so I remove all and close my account and start a new account etc. under my married name?

  Hi Jason,

  You can contact Adobe sales.

  Contact us | Adobe

  It could be useful!

  Rayyan

• I heard that we might try Lightroom for free for 30 days, once I wanted to try it but the download was so long that at the time he was downloading I changed my mind and stopped the download and delete each 'part' of the application. Now, I want to try it

  I heard that we might try Lightroom for free for 30 days, once I wanted to try it but the download was so long that at the time he was downloading I changed my mind and stopped the download and delete each 'part' of the application. I now want to try it finally but it says I can she... Is it possible to understand? I don't want it before trying it...

  Please check: software Adobe to trial has expired at the beginning

• Why is my mail account crashes all the time.

  My e-mail account on my Mac seems to hang a lot more recent.  Do not know why.  I did not change my account.  I get a message from crash to re - open and all is good for a little while until I get the same message again.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• EBS 12 - closer to the time it takes to merge of tablespace

  Good evening!

  Guys, I have detected a hint of fragmentation of 6.58 in a tablespace of our test EBS server.

  They asked me to try to recover the disk space, so initially I want to execute a statement "ALTER TABLESPACE COALESCE nom_tablespace" on this tablespace.

  This is the scenario:

  OS: RHEL 5.7 x86_64

  Oracle EBS: 12.1.3

  Oracle database: 11.1.0.7.0

  Processors: 8

  RAM: 16 GB

  The memory allocated to Oracle DB: 8GB

  Tablespace to coalesce.

  Total size: 384GB

  Used tablespace space: 372,9 GB

  Free space: 11.1 GB

  According to your own experience, how long could merge this tablespace? I have to communicate an approximate time of how long the process at the head of our Department before proceeding.

  Thanks in advance!

  Good afternoon!

  Sorry for the absence.

  I made a clone of our test EBS server and run the statement "ALTER TABLESPACE nom_tablespace COALESCE", surprisingly the process finished 5-7 seconds later.

  Then I read about this behavior, and the answer comes from the Oracle DB documentation:

  «Free coalescence extends is not necessary for locally managed tablespaces.»

  I questioned the tablespace, it is managed locally. So, for me, it was a good lesson.

  After this discovery, I proceeded to reorganize the storage space.

  Thanks for your advice!

• change the time format in general properties

  Morning all,

  This may seem like just me being pedantic, but I was wondering if...

  We can change the settings of the time displayed on the Properties tab, under general from seconds to minutes and seconds?

  In addition, also change it in the calendar when we choose for the option display "specific time"?

  Or should I try to get by in my head (which could take longer!)

  
  Concerning

  Dave

  No, you cannot change the settings for time in minutes and seconds.

  In about 10 years, creating eLearning with Captivate I don't remember a single instance where I wanted more than a few minutes on a single slide.  My modules are usually less than 7-10 minutes

  If you encounter situations where you slide that are always long for several minutes, then your modules should get too long (in my opinion).

  Perhaps you should consider Pierce your project across multiple slides.

• Quick way to assign the IDs table header cells to data?

  Acrobat X (10.1.9)

  For the accessibility of tables with complex headers, is there a quick way to assign the ID of the header cells to data associated with them?  I have not found a way faster than go to one cell at a time.

  All tags already have an ID, this question is how quickly assign the ID of header cells to all data cells in a row or a column.

  Better yet, is there a function or plugin that looks like to a table column and line and automatically assigns the headers for all data cells?

  I used the Table Inspector in Acrobat and several years of the CommonLook plug-in version. Both allow you to set several properties for all the cells in a selection. And they act as if they fortunately put header IDs for multiple cells, but after clicking OK and watch the cell properties, TI is not set for any of them, and CL only sets it to the first cell that has been selected.

  I prepare a PDF file of scientific reports for Section 508 compliance. Often, they are hundreds of pages long and got the results of large tables. Some clients insist on complex headers. Cell by cell is surprisingly long.

  I am running the latest version of CommonLook and manages to assign very well identification tags.  You can select multiple cells and assign them to a header.  You can also select the same cells and assign them to another heading using "Append". This will add the new header, without deleting the header already assigned.  In earlier versions Append has not worked for me.   That's what you need, if you have complex tables for a long time.  If you get the latest version and this isn't the case call Technical Support, as the plugin does not work correctly.  The Touch Up reading order tool does not.

  I sometimes create a white/hidden text for the header text that spans several columns and then create individual to keep them, but I wouldn't rely on it for long tables or use it as my main method. It's a pretty quick solution in some cases - or if your author likes to let in line 1, column 1 white, you can create your own invisible header for the screen reader.  But it is too difficult to verify, and not the best route to follow. Also the hidden text is considered a no-no by some as it is supposed to be a drop out / drop behind or mistake to layout.

• Show only the time and a red relief

  My watch does not show the clock face. If I press the bottom button, it will display the time and a symbol of red light.

  Hello

  Your watch has a low battery charge level and entered into mode of power reserve.

  This mode displays only the time when you press the side button, in order to keep this service as long as possible.

  You will need to exit this mode, press and hold the side button. However, you need to charge your watch first. Allow up to 2.5 hours for a full charge.

  More information:

  With the help of power reserve - Apple Support

• How to change the time to capture batch?

  I have pictures of a trip holiday in Asia, taken with an iPhone 5s and a DSLR.

  The iPhone has the date / time correct.

  But unfortunately we forgot to change the time of the DSLR at local time too.

  So I started a task time consuming to sort photos by events into albums and then manually move the DSLR photos to the right position, as long as it can be guessed the content of the photos.

  I found the script of leonie change of lot with iPhoto, but I don't have iPhoto.

  Is it another clever way do, maybe with some kind of extension?

  Concerning

  You might have used a smart album to separate the photos in your library by camera model:

  File > new Smart album, and then use the rule of 'model camera's... ».

  But unfortunately we forgot to change the time of the DSLR at local time too.

  To pass the time of photos from your digital SLR to the local time, select all the photos in your album (or smart albums) and then use the command in Photos in the Image menu "Image > setting Date and Time.  In the Panel that opens, set the time zone to the location where you took photos.

• Why should I is no longer the option 'Guest' in the Sierra calendars?

  After the upgrade to Sierra, I see is no longer the 'Guests' in the calendar option, nor can I change the date and time information.  I can add "Guests" of the iPhone and the show up on the calendar of the Sierra, but I can't edit, add guests, or change the time.

  I checked that I am still connected to iCloud that I continue to receive the prompt and acceptances.

  Thank you

  Jim

  Solved the problem. Disconnected iCloud (told to keep the calendar, etc. on this Mac). Signed back into account iCloud and everything is "good"!

  Jim