Similar Questions

• Could not complete your request because the smart object is not directly editable

  Well, I'm trying to simply remove a background but photoshop won't let me do. It comes up with the error:

  Could not complete your request because the smart object is not directly editable

  I read on the internet, saying that I should "rastize" my diaper. I googled rastize, but I couldn't find a good answer is that rastize. Also, I tried to translate rastize into my mother tongue, but it also says rastize. However, my photoshop is in Dutch. I couldn't find the option 'rastize '. What should I do? Here is a screenshot:

  https://postimg.org/image/enzf7mah3/

  Rasterization is to flatten just this particular layer. Since you are using is a smart object, you can double click top in the layer panel and edited directly, or you can rasterize it. It is always better to do a non-destructive editing, so you really need to use a layer mask to remove the background rather than delete it. However, the position of pixelation here is a layer in the menu:

  

• Save for precedent: the "Attachment" object does not exist in the previous version

  I'm trying to save a very simple VI from LabVIEW 2013 SP1 to LabVIEW 2009 but I get this strange error.  The VI contains only basic ex that are available in all versions of LabVIEW (shift logical AND Select,<=, u8). ="" when="" i="" try="" to="" save="" it="" for="" labview="" 2009,="" it="" gives="" me="" the="" following="">

  Missing object.  The "Attachment" object does not exist in the previous version.

  I thought first of all it had to do with being possessed by a lvclass, but even after that I removed the class (and unplugged from the lvclass) it always gives me this warning.

  When I try to open it with 2009, it will fail to load the schema-block (error 6).

  The next thing I tried was to copy the block diagram for a new VI and re - create the connector pane, but that doesn't change anything.

  Any ideas?

  Maybe "attachment" made reference to an attached comment (the arrow of a free label for an object on the diagram). I don't expect the presence of attached comments to cause a SFPed VI to not open, but it's the only thing I can think of. Try to remove any comment attached to your diagram and SFPing and see if that solved the problem.

• creating a restore point gives error 0 x 80042308: the specified object could not be found

  What is the specified object cannot be found - 0 x 80042308? trying to create a restore point in the protection system?

  a snapshot could not be created, please check "vss" and "spp" applications for more information event logs!

  Details: the specified object is not found! backup and restore system keeps giving me these messages!

  HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!

  Thank you!

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 3:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  It will be useful.

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• For a recent funeral where the mourners were mourners came from far and from all directions, I wanted to tag a photo of a card to send an email to allow them to find the crematorium (GPS was not an option for most!). This has resulted in

  For a recent funeral where the mourners were mourners came from far and from all directions, I wanted to tag a photo of a card to send an email to allow them to find the crematorium (GPS was not an option for most!). This has led many dotted lines of drawing and my usual 'technical fudge' draw a regular straight line then DAB the brush with the approximate background color at a regular interval would not be easy with the number of lines to draw. I look in vain for an option for me to do and was about to return to my "fudge" when I found the features of Style / dotted. Asked me if I wanted to replace the current Styles with those of dotted styles. Thas here no explanation of what he meant-Nevertheless, I selected Yes. My first line 'test' was off the card and several pixels wide I would have used - it was released as a sort of cross between an old 1960s DP Punch tape and an offset miniature piano keyboard. Clear and straight to the Styles/Reset Styles, I chose to replace the default style, thinking to be the inverse of the previous question. No luck - two months later, I can't yet draw a regular straight line. Outside re - install, how to return to where I was? I use Photoshop CS4 11.0 er

  Ianjalex

  On the tool Options bar, right click (Cmd + click on Mac, if I recall) button (far left) of the tool presets > reset all tools.

  You'd probably want to chart a path to achieve what you want (with dotted lines). Google or Bing "shot on way photoshop cs4" for more details.

• How can I find the dodge tool is not on the toolbar

  How can I find the dodge tool, is not on the toolbar

  Dodge and burn tools share the same space. You can click and wait a few seconds or right-click to open the passage to the outside the menu.

• Error determining responsible for image size: the loading object is not sufficiently loaded to provide this information.

  Hello

  I am trying to load and image and determine its dimension immediately after loading.  I use a Loader object and check the width when the object of the loader's contentLoaderInfo Event.COMPLETE event is triggered...

  myLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, onLoadComplete);

  Then:

  public void onLoadComplete(event:Event)

  {

  trace (myLoader.Width); 0

  trace (myLoader.contentLoaderInfo.Width); Error: The loading object is not sufficiently loaded to provide this information.

  }

  I tried something similar with the event of Event.INIT but same result.  Any ideas on the best way to solve this problem?

  Thank you!

  Moshe

  I think it's the answer to your question:

  trace(event.currentTarget.width);
  

• Colon, causing a "the requested object is not found on this server" error

  I have a Description field that is defined as a text box, its game to maintain up to 4000 characters and works perfectly, but if the user enters a colon: in the text and tries to save changes, or navigate to another page, we get a "the requested object was not found on this server" error. If I update the field through SQL, it updates very well.
  
  Please let know us in this moment test phase of the customer. Thank you, Laura

  When you close a thread and mark, you must assign points to correct answers...

  Thank you

  Tony Miller
  Webster, TX

• Find the function object DB with SQL Developer

  Hello to all, SQL developer 4.0.0.13 on Windows 7 64 bit version. I just started to use the function of object find DB. I type the name of the object in the worksheet, select the name of the object and press ALT + g pane, tab, palette, dialogbox binocular opens and shows me all the objects (and schema name) which are referred to as the selected text in the worksheet. When you click on the name of the object, the object opens twice in the object browser. Maybe I understood something wrong. I tried clicking on it once and twice, twice, I see two viewers object showing the same object. Also the pane, tab, palette, dialogbox binocular remains open after that. Is there a way I can hide/close this as soon as I click on the object. Thank you for your help in advance.

  the search panel will remain open until you hide/close it

  I'm not able to reproduce the problem of double-open - what type of object happens to, or she to what whether you click on?

  In addition, you are on an older version, you can upgrade to 4.0.2 because it could have been corrected in a 2 patch releases as your version debuted.

• Cannot delete alias if the referenced object does not exist

  My JavaScript does not alias in OSX when the referenced object no longer exists. The bug occurs on a network volume when the referenced object has been deleted or moved from another system. Do you have any idea how to remove/relpace this alias dead with JavaScript? Why it is not possible to remove an alias with a missing object? Thank you for helping me!

  myShortcut.remove ();

  

  Hmm. I have no problem removing broken aliases created in the Finder, but am not able to delete the symlinks broken on remote filesystems created with ln -s (or withile.createAlias ()f). Seems to be a bug for me, as the broken symbolic link can be deleted otherwise (in the Finder or with rm ). I guess you can use doScript() and an Applescript script:

  app.doScript('tell application "Finder" to delete POSIX file "' + myShortcut.fsName + '"', ScriptLanguage.APPLESCRIPT_LANGUAGE);
  

  Slow, however. You can use a 'do shell script' Applescript with rm but the multiple levels of bids and escape are a puzzle.

  Jeff

• Tab HP Web services to find the claim code is not found

  Hello

  I'm trying to implement HP ePrint on my printer HP Laserjet M1522nf connected to my home network. I am unable to find the claim code for my printer set up the device connected HP services.

  I entered the IP address on my web browser and entered the Printer Setup tab, but I can't find the web services tab or the printing page of information for the claim code.

  Please let me know how to find the claim code so that I could set up ePrint.

  Thank you

  Harish

  OK done judt this device is not ready for eprint.

  Please ignore my previous post.

• Find the ipod but do not know how to find the owner

  An ipod has been transformed into the lost where I work a few weeks ago. I want to find the owner because the L & F will be thrown in a week and it's more than a loss of pair of mittens or a thermos. Unfortunately I can't find the details of the owner because they turned on find my iPhone and ipod is now locked without the Apple ID. For some reason they have not picked despite having find my iphone turned on, so I think that they should not make the notification for one reason or another. I really want to find the owner, the case is pretty childish looking so I think that it belongs to a small child, if I contact the apple support they will help me? Is there a way I can contact the owner? I heard that apple doesn't do much to help, but I'd like to try.

  No. zero here or at Apple can help you to find the owner.

• Satellite L350-14F find the router but will not connect

  Hello

  I just bought a new laptop Satellite L350-14F, but I can't seem to connect to my connection wireless broadband.
  My roommate's laptop connects fine.

  The mine finds the network, asks for the WEP key but will not let me.

  I am running Windows Vista SP1.

  Can anyone help?

  Hmm. I recommend you to check the settings of the WLan router.
  If the MAC address filtering enabled and that your WLan MAC address was not included in MAC address filtering, then you would not be able to connect to the router.

  It would also be possible that you try to insert an incorrect encryption key

  Therefore, it would be desirable to disable all the security settings on the router and then try to establish the WiFi connection.
  If this would have functions, then you might reactivate the WLan security settings.

  By the way; Check if an update of the Wlan driver could also sometimes there is some compatibility problems between the Wlan router and Wlan card drivers.