Look at a cap out of Eclipse

Similar Questions

• Can someone please take a look at and point out the flaws in the chosen components.

  I'll buy components for the creation of 2 new machines to vsphere installation 5. The configurations of these are the following:
  Computer1:
  Core i5 2500
  ASUS P8H67-M PRO H67
  G.Skill Ripjaws - memory - 8 GB: 2 x 4 GB DIMM 240-pin - DDR3 - 1333 MHz
  2 TB WD SATA western digital Caviar Green
  Cooler Master Elite 370
  Corsair CMPSU - 600GS Gaming Series power supply SMPS 600W
  Samsung 22 X DVDRW desktop DVD writer internal
  Computer2:
  Core i7 2600
  ASUS Z68 P8Z68-V PRO
  G.Skill Ripjaws - memory - 8 GB: 2 x 4 GB DIMM 240-pin - DDR3 - 1333 MHz
  Seagate 1 TB Barracuda 7200.12 SATA 3 Gb/s
  Cooler Master Elite 430
  Corsair CMPSU - 600GS Gaming Series power supply SMPS 600W
  Both machines will be used for my study of vmware whitebox.
  Can someone please take a look at and point out the flaws in the chosen components.

  Please go through the link below

  http://www.VMware.com/resources/compatibility/search.php

  http://www.VMware.com/support/vsphere5/doc/vSphere-ESX-vCenter-Server-50-release-notes.html#beforeyoubegin

  Yours,

  Satya

• System.out.println () + Eclipse + Simulator

  I expected that System.out.println () would be exit in the Blackberry Simulator output Console, but I don't get anything in this window.  Y at - there a trick to getting the output here?

  Thanks in advance,

  You must attach the Simulator in debug mode. To do this simply right click on the project > Debug as > BlackBerry Simulator. That should fix the Simulator for the Eclipse JDE plugin and println (s) should now appear in the Console output for the Blackberry Simulator.

  To connect a device in debug mode, right-click on the project > Debug as > BlackBerry device. It attach the unit to the Eclipse JDE plugin and as above, println (s) should appear in the Console output for the Blackberry Simulator.

• I have a Canon T3i and when I take pictures in auto mode, all my pictures look a bit washed out.

  If I put my camera in P mode, put the balance of whites in the setting "100", of "disorder" (even in the Sun) ISO Picture style 'landscape', my photos look better, have more color saturation, more to my taste.  Guess my question is, is it possible to make the settings in automatic mode, to achieve the results in my pictures that I receive when you use the Mode "P"?  It seems to be the same for all the goals that I use, although usually use my Canon 18-55mm kit lens.   I took samples of the same scene in a car, then P mode and the difference is dramatic.  Is it possible to change the default settings in Automatic Mode for this problem?  And if not, why Cannon would set the default settings for these poor results?

  Because I gave up on Auto a very long time for the same reasons that you are having problems I don't know whether or not they have improved how it works. IF you get better results in PROGRAM mode (which you can also refine to be of even better results) then I think that it works as expected. I THINK Canon should not give buyers a DSLR the Auto setting. More first-time buyers spend a lot of time to earn the money to buy their first DSLR & think they can ignore learn them to use by choosing the Auto Mode. For me, it's a foolish gesture. Spend 10% of the time that it took to earn money by reading the manual & practicing things, he tries to explain.

  Another thing that can help is to look at a few times

  http://www.canonoutsideofauto.ca/

• Configuration of the Simulator with Eclipse

  HI -.

  I use version JDE 4.5 with the Eclipse editor. When I run the Simulator, Simulator of 8300

  turn on and I see my app.

  How to set up so that another Simulator is launched? I tried to look at some options, but

  It was not clear. I didn't see any documentation on this, but I could have missed the right one.

  If anyone has seen elsewhere, please point me in the right direction.

  There are .bat simulators subdirectory files. Their launch shows the right Simulator, so I need

  find out how Eclipse knows which Simulator to launch.

  Thank you

  Amod

  To view the documentation on that, click on the Help menu of Eclipse and choose summary help.  Then expand 'BlackBerry JDE plug-in for Eclipse Guide', expand 'Configuring the BlackBerry Smartphone Simulator' and then click 'Specify a BlackBerry Smartphone Simulator for a specific type of BlackBerry smartphone'.

• Flash Builder looks blurry on Macbook Pro with the retina display

  Hello

  Interface Builder Flash looks blurry on MacBook Pro with the retina display.

  Here is the screenshot:

  http://i.imgur.com/qMmmu.png
  

  Enlarge the image in actual size and notice that the interface of Flash Builder looks blurry.

  Please solve this problem.

  Andrey

  I had the same problem - could not believe my eyes on how horrible and blurry Flash Builder looked on my new Macbook Pro w retina.  Through she had suffered since last week and have just discovered this work around that someone figured out for Eclipse that also works on Flash Builder (guess b/c it is built on Eclipse).  Here is the link to the bug report that shows the work around (thanks to Brad Hudgeons):

  https://bugs.Eclipse.org/bugs/show_bug.cgi?id=382972

  Here is a cut and paste from the bug report in the case of the above url is deleted:

  Here's the workaround:  Do "Show package contents" on the Eclipse.app.  Edit Contents/Info.plist.  Just above     Place this:  NSHighResolutionCapable 
  

  Instead of Eclipse, display the contents of the package on Adobe Flash Builder 4.6.app.   After you change the Info.plist file, go to the Adobe Flash Builder 4.6.app and reproduce.  It will create an Adobe Flash Builder 4.6 copy.app.  Delete your original Adobe Flash Builder 4.6 and rename the Adobe Flash Builder 4.6 Adobe Flash Builder 4.6.app copy.app.  Then launch Flash Builder - you should see the text which is much clearer.  The graphics on the user interface are still unclear but at least the text should be crispy.

• How can I fix the color washed out for border to start in Firefox (vs Chrome)?

  I created a web page with a very basic table and border-style: first. Attached picture shows three colors ('red', ' #2CC11F ' and ' #22A8D6 ') of this table, and how they appear on the Chrome vs. Firefox (right) (left).

  The image is a screenshot taken with Firefox and Chrome on the same monitor.

  I tried all combinations of the elements listed in the link here: (http://cameratico.com/guides/firefox-color-management/) and restarted Firefox, every time, but I can't quite simply that it displays only not this border of immediately without looking terrible and washed out.

  A solid border seems okay, if it has to do with the borders of departure specifically (and possibly on the tables specifically).

  So the problem is that Firefox is to choose shades that are too light compared to Chrome?

  I think that you will need to take direct control of the colors of different sides using borders United. For example:

  http://jsfiddle.NET/kr3gdzhd/

• WRT1900AC Caps of downstream of the Modem data cable to 36 Mbps?

  After that several months of fighting with Comcast that I was getting not my modem cable complete downstream speeds I was paying for, I found that when a computer connecting directly to a modem cable, I'm able to get more 150Mbps downstreatm, but when I connect my router to AC Linksys WRT 1900 between my cable modem and my computer These same download cap out at 36 Mbps speeds.  I use the latest version of the software and have no quality of Service that I am aware of running on ports WAN, LAN or WLAN.  Any ideas?

  Provider of Internet and the Modem Configurations
  What ISP Internet Modem MFR. and model # you have?

  Prioritization of media:
  Enable the prioritization of media
  Activate the Support WMM
  The maximum value that your ISP provides you with the value Downstream\Bandwidth. # x 1024 = # value to enter the area downstream.
  http://www.Linksys.com/us/support-article?articleNum=138353
  http://www.Linksys.com/us/support-article?articleNum=156271
  Unless required by your ISP IPv6 disable on slot Internet connections

• How to turn photos into this 'look '?

  How can I convert normal pictures in this "look"?

  

  Find out more about and experimenting, Duotone. And maybe trichromes.

  -OB

• Canon 600 d - should my blurry viewfinder without a purpose is fixed? I have the body of cam

  As says the topic, I have a Canon 600 d or Canon eos Rebel t3i and I'm worried because I can't find all the information in the user manual any where on the net about the question to know if I'd see a clear picture in the viewfinder of my camera when no lens is fixed.  I had enough $ buy the body of the camera until now and I don't have a goal, and I don't know anyone with a DSLR camera question on this subject.  Sorry, this may sound a stupid question - maybe I'm not supposed to be able to clearly see the images in the viewfinder without an AF lenses or another kind have the lens attached to the camera?  I just wanted to know for sure if this unit has a serious problem, before I go ahead and buy a goal for her.  Thanks in advance to anyone who has the time to clear this for me, if you would like more information about me ill will be happy to give let more just me know what you need.  Sorry I'm a super beginner when it comes to high-end cameras

  If my viewfinder cameras is not supposed to look that way without objective and this issue is not caused by the glass, then what else could be causing this problem?  Maybe I'm getting ahead.  I guess I'm just worried, that I have been ripped off when I bought this camera now.

  vtmb760 wrote:

  As says the topic, I have a Canon 600 d or Canon eos Rebel t3i and I'm worried because I can't find all the information in the user manual any where on the net about the question to know if I'd see a clear picture in the viewfinder of my camera when no lens is fixed.  I had enough $ buy the body of the camera until now and I don't have a goal, and I don't know anyone with a DSLR camera question on this subject.  Sorry, this may sound a stupid question - maybe I'm not supposed to be able to clearly see the images in the viewfinder without an AF lenses or another kind have the lens attached to the camera?  I just wanted to know for sure if this unit has a serious problem, before I go ahead and buy a goal for her.  Thanks in advance to anyone who has the time to clear this for me, if you would like more information about me ill will be happy to give let more just me know what you need.  Sorry I'm a super beginner when it comes to high-end cameras

  If my viewfinder cameras is not supposed to look that way without objective and this issue is not caused by the glass, then what else could be causing this problem?  Maybe I'm getting ahead.  I guess I'm just worried, that I have been ripped off when I bought this camera now.

  You won't see anything through the viewfinder of any SLR (i.e. the T3i, obviously) without a lens mounted. In fact, you should never take the body Cap out of the unit except to mount a lens. Leaving off the coast is a good way to attract the dust on the mirror or the sensor.

• GPS returns for speed and longitude 0.0

  I get 0.0 for the speed (except NaN invalid) and longitude.  Latitude and journey to return a valid number. It's on a Torch 9810 OS7 but the app is defined for the OS6.  Look in the console attached through Eclipse,

  public class LocationListener implements javax.microedition.location.LocationListener{
  
      private static long lastFix = 0l;
      private static Object lock = new Object();
  
      public void locationUpdated(LocationProvider provider, Location location) {
          try {
              BlackBerryLocation loc = (BlackBerryLocation) location;
              double longitude = 0d;
              double latitude = 0d;
              if (loc.getQualifiedCoordinates() != null) {
                  longitude = loc.getQualifiedCoordinates().getLongitude();
                  latitude = loc.getQualifiedCoordinates().getLatitude();
              }
              float speed = loc.getSpeed();
              float course = loc.getCourse();
              setLastFix(loc.getTimestamp());
              GPSLocation gps = new GPSLocation(longitude, latitude, speed, course, (loc.getTimestamp() == 0l ? System.currentTimeMillis() : loc.getTimestamp()));
              gps.setValid(loc.isValid());
              gps.setStatus(loc.getStatus());
              gps.setError(loc.getError());
              gps.print();
              App.addToPool(gps);
          } catch (Exception e) {
              e.printStackTrace();
          }
      }
  
      public void providerStateChanged(LocationProvider provider, int newState) {
          if (newState == LocationProvider.TEMPORARILY_UNAVAILABLE) {
              provider.reset();
              provider.setLocationListener(null, 0, 0, 0);
          }
          App.setupGpsPolling();
      }
  
      public static void setLastFix(long lastFix) {
          synchronized (lock) {
              if (lastFix != 0l)
                  LocationListener.lastFix = lastFix;
          }
      }
  
      public static long getLastFix() {
          synchronized (lock) {
              return lastFix;
          }
      }
  
  }
  
  public class GPSLocation {
      ......
      public void print() {
          StringBuffer sb = new StringBuffer();
          sb.append("longitude: " + getLongitude()).append("\r\n");
          sb.append("latitude: " + getLatitude()).append("\r\n");
          sb.append("speed: " + getSpeed()).append("\r\n");
          sb.append("course: " + getCourse()).append("\r\n");
          sb.append("ts: " + getTimestamp()).append("\r\n");
          sb.append("stat: " + getStatus()).append("\r\n");
          sb.append("err: " + getError()).append("\r\n");
          sb.append("valid: " + isValid()).append("\r\n");
          System.out.println(sb.toString());
      }
      ......
  }
  

  I don't understand.  Do works that way.

             QualifiedCoordinates coor = location.getQualifiedCoordinates();
              if (coor != null) {
                  longitude = coor.getLongitude();
                  latitude = coor.getLatitude();
                  }
  

• Error in creating the Service for the Service of Bussiness name

  Hi friends
  I create a custom for Service of Bussiness Service program that is used to download data from spotbilling to the BCC. The CM_Sbm_Upload service program consists of ID programs CIPBSEGP, CIPMMRDP, CIPTSATP com. When I give it to the bussiness service I get the error message
  
  Service missing metainfo for "CM_SBM_UPLOAD."
  
  
  pls help me solve this problem.
  
  Thanks and greetings
  Jean Jacques

  Hello

  I have the same error during my development of a maintenance of page service.
  Please check if the cm.jar is correctly deployed in your splservice.ear and also all other deployment directories.
  You can find them in the window out of eclipse after executing the script "Deploy CM".

  When the cm.jar is deployed, check if the annotations are correct.

  My annotations are which looks like this:

  /**
   * Perform Batch Add.
   *
   * @PageMaintenance (secured = false, service = CMIMDIMP,
   *      body = @DataElement (contents = { @DataField (name = CM_SIMULATION)
   *                  , @DataField (name = XML_REQUEST)}),
   *      actions = { "change"
   *            , "read"},
   *      modules = { "foundation"})
   */
  

  To connect to a Service on Page, you must first create a service program and the name of 'service' of the service program must be
  the name of the annotation of service you specified in your Page Maintenance Service, in my case "CMIMDIMP".

  There are no validation when registering the issuance of service, validation occurs when you save the business.

  BTW. JD - gui.exe allows you to decompile the file cm.jar, but you will not see the annotations!
  I use 7 - zip to view the ear file.

• deploy the ear - invalid file file

  Hello
  I'm trying to deploy an ear file using ANT wldeploy tasks.
  
  The file contains
  -ejb (jar separate customer interfaces)
  -jpa persistence
  -webapp.
  
  The application server is 10.3.3
  
  Can I deploy the ear via eclipse with no problem on my local server.
  
  When I try and publish/deploy on a remote server I get an error [caused by: weblogic.deployment.EnvironmentException: duplicate units of persistence with name...]
  
  That's why agrees it to depoy via ant match. This method fails even on my local server. Say the (ear) file is not valid.
  It seems that the action "publish" in eclipse is making changes on the ear that the simple file-> export-> does not ear in eclipse.
  
  I then tried to pack the environment in the structure of directories of split (so far, I used just the standard eclipse - projects java/j2ee configuration).
  This attempt failed at the wlappc stage. ArrayIndexOutofRange exception.
  
  Any ideas?
  
  Thank you
  Michael

  Thanks for this stacktrace, it helps a lot.

  It seems that WLS is certainly see both persistence.xml files and reports the error.

  Caused by: weblogic.deployment.EnvironmentException: duplicate units of persistence with the name myapp_persistence in the field of myapp application.

  Then it is to point out the locations of the PUs in double, is to see (it's very useful diagnostics, I have not seen this before):

  First location of CENTRAL unit: file:/var/opt/oracle/middleware/user_projects/domains/ecm_domain/servers/AdminServer/tmp/_WL_user/myapp/upzgei_/lib/myapp_persistence.jar_.
  Second place Pu: file:/var/opt/oracle/middleware/user_projects/domains/ecm_domain/servers/AdminServer/tmp/_WL_user/myapp/upzgei_/APP-INF/lib/myapp_persistence.jar_

  For me, it looks like the packaging step in Eclipse, is updated the same module in two separate places within the file EAR - one being the standard Java EE 5 app library directory (/ lib) and the second being the application owner WLS directory library (/ APP-INF/lib).

  Look at how you have your setup of library/project in Eclipse dependencies - WLS fully supports the standard directory/lib to Java EE 5, so you can put some bookstores application level, you want to share between the modules of your application in there and be confident that it will work - so that you only have a single present myapp_persistence.jar in the EAR file.

  Hope that helps.

  see you soon
  -steve-

• History of music - it back please!

  Hey guys,.

  After completing the web und community support, I have to admit that I can't find an approach to return to the history of music which was very useful for me.

  Basically, there is enough space to implement this convenient feature, but it seems that Apple just got rid of him. Thus, Apple - please, bring back the history of music!

  Or is it simply a method that I have not discovered? All the ideas around?

  Thank you very much for your help!

  Hello, take a look at this article out-the-ios-10-music-app.html http://www.macworld.com/article/3120438/ios/ask-the-itunes-guy-your-questions-ab

• Folder iTunes playlist gone

  I have updated itunes (12.4.2.4) last week on 20 July. However, he had to wait until the last days when I noticed that two of my playlist files favorite are rising and disappeared. I looked around and figured out how to import a playlist of music old .xml. Even after doing this, with a library of playlist of the month of May this year, these two specific folders have always disappeared, even though I've had them for years. Anyone had similar problems? Help! Thank you.

  This article is for you If you see not your entire library after you update iTunes on your Mac or PC - Apple Support