Look at one/navigation in the portal of ReadyCLOUD does not
Tags: Netgear
Similar Questions
-
My roommate has downloaded a manual from LG Electronics cell phone in format .pdf (Adobe). The download is complete on Firefox. It double click on the download finished in the 'Download', its pc box became very slow and finally frozen. It is running Windows XP Media since 2004 / 2005.
When it tried to reboot, the following message appeared..."... isass.exe system error indicates an encountered or specified revision number is not one known by the service." Continues it's maybe a more recent revision, then the service is aware of... »
Then will continually attempt to restart. by a failure. Note the sequence of the events above are as accurate as the harshness.
Does this mean the registry is damaged?
Ran Iolo System Mechanic and has been able to run the tests in two (2). One of the physical drive and the other to the integrity of the partition. Nothing helps. A ran Norton recovery and found no errors. Performed a chkdsk /r and no mistake. Ran a chkdsk/p and found errors, but was not fixed. Any suggestions about where to start?
I would like to thank all those who helped in my installation of Windows 8 Preview of consumer. He didn't find any problems of incompatibility with Norton a few months back and HP support said that the hard drive has been ruined, and I had to buy one of them after receiving the disks to install Win 7 again. Instead, I have used Drive Scrubber from Iolo System Mechanic and installed Win 7 perfectly. I'm now back with Windows 8. ALL of you are awseome!
Donnie
Hello
Try to start in last know good confriguration pressing f8
-
Change default model navigation in the portal generator
Hello
I develop a portal 11.1.1.8 Webcenter portal using the portal generator. I created a new Navigation model. Now, I want to assign as the model of default navigation for the portal, I had created.
When I go to the link to Administration-> settings, Navigation is not editable. Other things like Page Template, Skins etc can be changed. Is there a way I can change the value by default model of Navigation for my portal?
According to the link here: http://docs.oracle.com/cd/E29542_01/doc.1111/e27603/portadv_admin.htm#CHDDEIIA
The navigation model for a particular site cannot be changed after creation. Instead, we can change the default Navigation model based on our needs.
-
I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.
Could you please include screenshots of the so-called issue?
-
Recently I have not been able to forward my iPhone 5S for message store. I've never had this problem before.
When I looked to what to do, I realize that The Call Forwarding icon does NOT appear in the status bar when I try to transfer calls. How can I fix this please?
It does not work using * 21 * + 6 * 41412 * 2 #.
< personal information under the direction of the host >
Call forwarding is a function of carrier. Contact your operator.
-
Trying to connect to one of the accounts on my computer and the message telling me "the group policy service does not have the journal on.» Access denied. " Can someone help me with this?
Hello
1. is the computer connected to a network domain?2 are you facing this problem into account administrator? Do you have other administrator accounts enabled in the computer?
3 did you changes to the computer before the show?
Method 1:
Check if you are able to start the computer in safe mode.Step 1: Safe Mode
Start your computer in safe mode and check the number.To start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeIf you are unable to boot into safe mode, please let us know.Step 2:
You run the system restore in Windows recovery environment?
If this isn't the case, I would say you can do a system restore to the Windows recovery environment. Follow the steps in the section provided.
I hope this helps! -
How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?
Like I can't pin, I keep it at the top of the page with scroll effect 0.
It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.
Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.
-
Change the source of entry with the Caps Lock key does not
It should be possible to change the input source with the Caps Lock key on macOS Sierra.
and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.
However, it does not lock shift still only works as long as CapsLock
I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.
I use only the default input source and have not installed and related programs to the keyboard or input source.
Can anyone help?
Thanks in advance.
Greetings slwsbl!
Thank you for using communities of Apple Support.
I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.
It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
Switch between input sources
To switch between input sources, do one of the following:
Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.
Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).
To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.
Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.
Best regards.
-
calendar for the week of jQuery does not work in the new version of firefox v42.0
Hello
Thanks for your reply.
IAM develop on the issue that iam facing knowledge, events on the calendar for the week of jquery does not work in firefox version iam 42.0 faced to the problem that iam unable to change back or delete nominations that are displayed.
For example if try clicking on one of the appointment generally a popup comes to change or to restore or remove the appointment but iam not getting that. But this feature does not work in lower versions of firefox (version 32.0 for example). Please check the jquery week calendar demo following URL looks like this:
http://robmonie.github.IO/jQuery-week-calendar/full_demo/weekcalendar_full_demo.htmlI've just rescheduled lunch 12:00-12:15, so it seems to work on 42 Firefox on Windows.
What is the latest version, where it has worked for you?
Have you tested Mode Firefox safe to rule out the possibility of an extension conflict? See: Firefox in Safe Mode troubleshooting questions.
-
My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?
They are only updated office or all updates?
For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx
then manually download and install the same.
If all updates, perhaps consider the following general tips-
Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.
Method 1: Save the Windows Update files
1. Click Start and type notepad in the box start the search.
2. click on Notepad in the list programs.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S
4. in Notepad, on the file menu, click Save as.
5. in the file type list, click all files.
6. in the file name box, type register.bat.
7. save the Register.bat file to your desktop.
8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
9. try to reinstall updates.http://support.Microsoft.com/kb/958053
See: method 1: save the Windows Update fileshttp://support.Microsoft.com/kb/326253
Method 5: Registry Windows Update engine fileshttp://support.Microsoft.com/kb/971058
How to reset the Windows Update components?Method 2: Download and install Windows Update agent
Windows Update Agent
How to get the latest version of the Windows Update Agent to help manage updates on a computer
http://support.Microsoft.com/kb/949104Information for network administrators about how to obtain the latest Windows Update Agent
http://support.Microsoft.com/kb/946928Click Start, click run, click Browse, navigate to the file you saved and click Open.
Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce
Click run.
Follow the steps to complete the wizard.
Important
To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.
Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.
Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.
D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)
TaurArian [MVP] 2005-2010 - Update Services
-
Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...
Hey James,.
I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks againOK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help! -
I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?
Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:
I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?
I would like to point out something that you may not realize: Windows 8
has two interfaces; the modern/Metro Interface (which may be all the)
you have looked at) and the traditional desktop Interface. You can use
one or both. This traditional desktop Interface is almost
identical to the interface of Windows 7. the biggest difference is that
There is no Orb start clicking to bring up the start menu.But note that you can get the ORB start by using one of the many
third-party programs, are free or very cheap (the classic interface
http://classicshell.sourceforge.NET/ and debut8 to
http://www.stardock.com/products/start8/; my personal preference is
Debut8, but they are both very good). And goes from an interface to
the other is very easy; There are several ways, but simply by pressing
the Windows key is perhaps the easiest.Just install one of these two and using the traditional desktop computer
interface may be a better choice for you than going to Windows 7.
I use Windows 8, almost exclusively with traditional workstations
the interface and with 8 Start installed. If you were to look at and use
my computer, you may have a hard time realizing that it is not
Windows 7.
I also recommend to read "how to make Windows 8 or 8.1 watch and.
Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
I can't address the issue with your games, except to say that
whenever you move to a new version of the operating system, some of
which is used to run on the former does not work on the new. And it's
much more likely with utilities and games with companies
applications. -
HI - we are trying to install the beta version (18) on a Windows 8 machine for one of our customers. But, the update of Windows does not allow that to happen. We changed the approach of updating to do not have the automatic updates. But that does not solve the problem. Any help is appreciated! I guess it's a pretty easy fix, but unfortunately I'm not Windows savvy these days.
Thank you!
Oh, it's not good advice. Uninstall the last update to Flash will not remove Flash of the system, and it will leave you with a vulnerable version, the Senior Flash Player. Install the player ActiveX for Win7 won't upgrade Flash Player component built into Internet Explorer, then the user will be still stuck with an outdated version and no beta version until they run windows update again.
We distribute a beta version for Internet Explorer on Windows 8 and over all because we do not have this distribution channel (it's the same reason that we do not have a beta of Chrome), and the binary of Win8 differ from those we publish for Windows 7. There is no effective way to do at the moment.
We talk to Microsoft to provide a mechanism for the distribution of beta versions and releases of extended support of Flash Player in Win8 + users, but these vehicles of distribution would have to come directly from Microsoft and we always talk just to this topic, so there is no solution in the short term.
If you want to evaluate beta versions on Win8 + you look essentially NPAPI on Firefox or PPAPI on the opera.
-
To start thunderbird, I click on the quick start on my toolbar icon, it highlights that if beginner, then a few seconds later, returns to the closed state. No e-mail window never appears on the screen. When I check the Task Manager, thunderbird does not appear in the list of running applications, but one or two processes show running on the Details tab (one first process by clicking on the icon, and then another if I right click and try to open one of the windows in option). I am running Windows 8.1. It worked well earlier in the day, so I have no idea what happened past. Restart the PC does not help the issue. How can I get the windows thunderbird appears on the screen again? If I can't, please send the instructions to backup all the associated email and address profile information so I did not lose anything... then uninstall and reinstall thunderbird and restore all the info related to my current profile. Thank you.
Thanks for the reply... still not sure what happened, but I ended up uninstalling and reinstalling bird t. Everything is back to normal after that. So your solution can work, but I don't have the chance to try it. My solution, but is not ideal, was effective and the problem was solved.
-
Craigslist 'Reply' and the buttons 'Add images' does not
Until a few weeks ago, I used Firefox with no problem when browsing and posting Craigslist ads. Recently, the 'Reply' button in the messages does not at all. Nothing happens when I click it. When I write ads, the button 'Add images' does not save when I click it. I had to go back using Internet Explorer when using Craigslist. Help, please! (If it helps, I had to post this question in Internet Explorer, as the button "Question" on the page does not work in Firefox).
Clear the cache and delete cookies only from Web sites that cause problems.
"Clear the Cache":
- Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
Maybe you are looking for
-
Re: Windows will not start on my old Satellite A50 - 105
Windows xp SP 2Marketing and toshiba screen comes on and then just a blinking cursor. Power and ctrl alt del and f12 produced 5 symbols.Various arrow keys highlights 5 symbols in turn. Pressing enter on 1 (hard drive?)Why windows won't start?
-
Please consider important!
-
Between in contact with vs 'My Contacts': what are they and how do I get rid of them.
In my Contacts (OS X 10.10.5, Contacts 9.0), I somehow ended up with FOUR groups under "iCloud": All the iCloud Contacts My Contacts Phone I don't explicitly consciously create these groups. Can someone explain the difference between them? AND can
-
How can I change/color/font size of tab independently controls?
How can I change/color/font size of tab independently controls? When I change one of these attributes, it applies to all the controls on the tab... Thanks for the help!
-
ProBook 650 G1 and IDT HD Audio driver
IDT HD Audio driver sp65138 driverpack install properly of SCCM with the task sequence. The speaker in the taskbar icon has a red x and says "no audio device is installed". Device Manager seems ok until you get in the properties for IDT that doesn't