looking for a quick convert cluster table tables N

Similar Questions

• Looking for a registered Converter PDF download site

  Previously, I was able to use the "convert to PDF" function on my Dell printer... now all of a sudden he wants to convert to OCF or something...

  Hello

  I suggest you to contact Dell support on this issue. In the meantime, you can consult this article and check that helps. Refer to create a PDF section.

  http://support.Dell.com/support/eDOCS/systems/V105/en/UG/d0e1878.html

   

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_341170&isLegacy=true

  If you are looking for the third-party PDF converter, you can try the search in the Web site, using one of your favorite search engine.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Upgrade RAM on a pavilion dv6 model 3111sa looking for a quick answer!

  As the post States im looking for new ramm to my HP pavilion dv6 model 3111sa

  I'm currently looking for this:

  http://www.Amazon.co.UK/Corsair-CMSO4GX3M1A1333C9-DDR3-laptop-memory/DP/B002YU83YO/ref=sr_1_1?s=comp...

  Could you tell me quickly if his support so I can buy it.

  Thanks in advance

  Hello

  It should work fine.

  Kind regards

  DP - K

• Mechanical locking action does not not for boolean within a cluster table

  I am currently on LabVIEW 2012.0f1 and I noticed that if you were to create a typedef of cluster that has a Boolean control with the mechanical action of the latch and then put the said cluster within a table, the Boolean value will act as a switch instead of a lock if read in a loop or an event structure.   Is this a bug or an expected behavior?  Whatever the answer, how can I get my desired action of a latch behavior?

  Thank you

  I don't think it's a bug.  It is consistent with a table.  If you put a button inside a table, you cannot set its mechanical action more.

  

• Look for the name of the table of choice in stock or manufacturing

  
  What is the name of the table in the inventory which is used to store information in list of choice?

  To make my question clear, here are the steps:

  (1) connect to Oracle EBS (R12) with responsibility for the inventory.

  2) go to settings

  (3) go in the research - you see the screen named "manufacturing research."

  4) click on your flashlight to select the value for the Type.

  (5) for example, select MTL_CONVERSION_TYPE - you'll see the Code values and columns meaning listed below:

  Meaning of the code

  1 specific item

  2 standard

  3 standard and specific item

  Question:

  What is the name of the table that contains the values above?

  Hello

  I finally found the name of the table. The name is "FND_LOOKUP_VALUES".

  Thank you

• How to convert a table 1 d of cluster of 5 items in a table of numbers 2D? (a graph historical data)

  Hello

  in my vi, I have an array with 5 slots displaying measurement data.

  The user must be able to record all the data in the history of the card at any time. (for example the user looks at the picture and something happens, then it based on a 'save' - button)

  I know that I can read the data in the history with a property node. This isn't the problem. The problem is, how to deal with the data? The type of history data is a table 1 d of cluster of 5 elements.

  I convert these data somehow in a 2 D-table of numbers or strings, so that I can easily save it to a text file.

  How to convert a table 1 d of cluster of 5 items in a table of numbers 2D?

  I use LabVIEW 7.1

  Johannes

  Hallo Johannes,

  the photo shows the trivial way:

  

• Quickly convert a length (m * n) table 1 d an m by n matrix 2D

  Hi all

  I'm looking for a way to speed up a particular step in a VI that I use. I have a table 1 d of length m * n I want to convert to a table 2d of dimensions m and n. currently I feed the table 1 d in a loop and use split 1 table d to cut the table 1 d in a piece of m in length and another piece with the rest, then each of these m-length pieces forms so a new row in another table. I do not know is not clear, so I attached the VI section that does this. The VI works fine, it's just slower I want. I'll regularly get a 1 d table which is 1024 * 8000 long and this code is certainly the step rate limiting. Is there something I can do to make it run faster?

  Thanks for taking a peek!

  For the context (although I doubt that this important to answer my question) m is called "Width of the sensor" and n "Num of shots." I'll send a play command in an array of photodiodes 1024 who report their recent measures "Number of shots". This output is like a painting 1-d, which is pixel1shot1, pixel2shot1, pixel3shot1... pixel1024shot1, pixel1shot2... etc and I would be like a 2d array that is pixel by shooting.

  There is a matrix function of reshaping on the table palette.

• Just looking for best way to do... 2 data joined tables

  looking for advice this.

  using oracle 11 g.

  I have data im going to use in a view to update TABLE1 monthly.im going to see all these data via php in a web page.

  I would like to add a few modifiable of table2 values who will join table1.

  -drop the table1 table:

  create table table1)

  number of value1,

  Number of value2,

  number of value3,

  Number of VALUE4,

  number of Value5

  );

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (1119,4,54,772,643);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (22,345,55,278,446);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (314,193,75,542,676);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (13,396,59,232,670);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (41,2003,505,232,7096);

  -select * from table1

  create the table2 table)

  VCLE NUMBER,

  NUMBER OF VERSION_NUM,

  COMMENTAIRES1 VARCHAR2 (50).

  comments2 varchar2 (50)

  );

  -select * from table2

  Vcle in table2 is a concatenation of value1, value2, value3 on table1.

  So the end result is on the web page of all the values in table 1, unmodifiable, 2 reviews in table2 fields that can be changed. A user can change these fields, then they will save in table2 with the key of concatenation. the reason why I want to do like this, with a second table is because whenever a user changes these fields I want to insert again to occur in this table, not an update, which will add a trigger, I have a new version number. This sounds like a mistake to do it this way?

  The strategy of the concatenation is a mistake.

  Concatenation requires strings, then you would be conversion 3 numbers to strings to concatenate, then convert it to a number stored in table2.

  If I insert = 11-v1, v2 = 11, v3 = 11 then insert v1 = 1, v2 = 11, v3 = 111.  I generates the same Vcle and either corrupt your data or make it impossible to tell what row in table1 = 111111 Vcle should concern.

  A substitution used as primary key in table 1 key is a way to fix this design.

• Convert a table to a cluster of 4 elements array values 2D 2D double precision, or a table 1 d

  Y at - it an easy way to convert a 2D cluster table (4 elements each including a Boolean value and three numbers dbl) to a table 2D or 1 d of double precision values? I need to store my data in a text file to control a robot, I'm trying.

  Thank you.

  There are 1 million different ways to do it. The best thing to do would be to leave the data exactly as it is and simply use Flatten in XML format (search the palette). It accepts virtually any type of data, including a 2D cluster table as you described. He will spit human readable (although not necessarily nice) text that you can write to a text file. Then, read you data from the file and use Unflatten of XML to do the reverse.

  Or you can use a similar model to flatten your data in a 1 d of double table which you can then unflatten.

  

• Looking for table that contains line_id SB between promotional item and its elements of Get

  Hello!

  I'm looking for the table that contains the s.o. row between the advertising object and its elements Get ID after the modifier is applied to a sales order. In fact, I'm looking for a table that will show me that s.o. line_id _ is the promotional item and l.o. line_id _, _, _ are the elements of Get.

  Thanks in advance

  OE_PRICE_ADJUSTMENTS and OE_PRICE_ADJ_ASSOCS are the tables you are looking for.

  Thank you.

• You are looking for individual characters in table

  I want to search this inuputing a table or two, or three letters. If a string in one or more of these letters, I would like to know what channel it is.

  I tried this and is first time around works but but it grows reselts the search table every time. How to do a new search every time? Also, I am looking for the search results to get a more accurate result.

  var myArray:Array = new Array;

  implement a multidimensional array that contains data

  () myArray.push

  ["alligator", "ant", "bat", "bear", "beetle", "bird", "bored", "buffalo", "bug",

  'Rabbit', 'camel', 'cat', 'centapede', 'chicken', 'chicks', 'chipmunk', 'cow ',.

  "Crow", "deer", 'dogsbig', 'dogsmall', 'duck', 'elephant', 'fish', 'fox', 'frog ',.

  "Giraffe", "giraffebaby", "goat", "goatbaby", "gorilla", "Marmot", "hamster"

  "hippo", "horse", "Iguana", "Kangaroo", "kitten", "Lamb", "lion", "lizard."

  "monkey", "Butterfly", "mouse", "OWL", "pig", "pigeon", "Puppy," "raccoon", "rat."

  "rhino", "Rooster", "sheep", "skunk", "snake", "spider", "squirrel", 'star of the sea', 'Swan,'

  'Tiger', 'Toad', 'Turkey', 'Turtle', 'Walrus', 'whale', 'the Wolf', 'Zebra']);

  myArray.push (["beer", "coffee", "espresso", "juice", "soda", "tea", "water", "wine"]);

  Here we have set up some properties on the object array to contain the string of our research and our results

  myArray.myResults = [];

  search_btn.addEventListener (MouseEvent.CLICK, mouseHandler);

  function mouseHandler(event: MouseEvent): void

  {

  myArray.myTarget = input_txt.text;

  / / gives us now the word search

  myArray.forEach (multiSearch);

  //show results

  Print();

  }

  This is the function that does all the heavy lifting...

  multiSearch feature (element: *, index: int, array: Array)

  {

  see if we have a match in this table and in return pass its index

  for (var i: * in the element)

  {

  If (item [i] .indexOf (array.myTarget) >-1)

  {

  var tempArray:Array = array.myResults;

  tempArray.push ([index, i]);

  array.myResults = tempArray;

  }

  }

  }

  all code below is OPTIONAL... This is just to show our results

  in the output window in Flash to let you know it worked...

  var printArray:Array = myArray.myResults;

  var search: Array = new Array;

  function print (): void

  {

  for (var i: * in printArray)

  {

  ReSearch.push ([myArray [printArray [i] [0]] [printArray [i] [1]]]);

  }

  trace (ReSearch);

  }

  I don't know what you're trying to do is very convenient, but for academic reasons here's one code that works and which is more effective based on the feature you sketched out:

  var myArray:Array = new Array;
  // set up a multidimensional array that contains some data
  myArray.push(["alligator", "ant", "bat", "bear", "beetle", "bird", "bore", "buffalo", "bug",
  "bunny", "camel", "cat", "centapede", "chicken", "chicks", "chipmunk", "cow",
  "crow", "deer", "dogsbig", "dogsmall", "duck", "elephant", "fish", "fox", "frog",
  "giraffe", "giraffebaby", "goat", "goatbaby", "gorilla", "groundhog", "hamster",
  "hippo", "horse", "iguana", "kangaroo", "kitten", "lamb", "lion", "lizard",
  "monkey", "moth", "mouse", "owl", "pig", "pigeon", "puppy", "raccoon", "rat",
  "rhino", "rooster", "sheep", "skunk", "snake", "spider", "squirrel", "starfish", "swan",
  "tiger", "toad", "turkey", "turtle", "walrus", "whale", "wolf", "zebra"]);
  
  myArray.push(["beer", "coffee", "espresso", "juice", "soda", "tea", "water", "wine"]);
  // here we set up some properties on the array object to hold our search string and our results
  myArray.myResults = [];
  
  search_btn.addEventListener(MouseEvent.CLICK, mouseHandler);
  
  function mouseHandler(e:MouseEvent):void {
       myArray.myTarget = input_txt.text;
       // reset search results
       myArray.myResults = [];
       // now we call the search
       myArray.forEach(multiSearch);
       //show results
       print();
  }
  
  // this is the function that does all the heavy lifting....
  function multiSearch(element:Array, index:int, array:Array) {
       // see if we have a match in this array and pass back its index
       for each(var value:String in element) {
            if (value.indexOf( array.myTarget) > -1 ) {
                 array.myResults.push(value);
            }
       }
  }
  
  function print():void {
       trace(myArray.myResults);
  }
  

• Can I convert a table to a partion in an array of partitoned quickly?

  Hello
  
  We have 2 tables, one is the transactions table, and the other is table to archive transaction.
  Both have the same columns and indexes, but transaction archive table is a partition table stood by transaction date.
  
  Each week, we need to move the data from the transactions table to archive the table, and he needs about 2 hours.
  (add the partition, then insert into the partition by select * transaction)
  
  Oracle has the function to convert a table to a partition to a partition table?
  (just like the opposite direction of the EXCHANGE PARTITION)
  
  Thank you
  
  ARO
  Patrick

  Oracle has the function to convert a table to a partition to a partition table?

  It seems that you want to move ALL the rows in the transaction table in the table to archive.

  Why not do
  a. Add an empty Partition
  b. remove unnecessary indexes on table txn (index who are not in the table to archive)
  c. Swap Partition: ALTER TABLE EXCHANGE PARTITION WITH TABLE newpartition archivetable txntable;
  d. create a new txntable that is empty
  e. create indexes if necessary

  PS: If really do you move all the lines from the operating table to the table to archive, it would be the REMOVAL of the operating table that would take the most time, undo and redo.

  Hemant K Collette

  Published by: Hemant K grapple on June 1st, 2010 16:34

• Writing to the cluster table

  We have an array of input we want to map where we use bundle according to the cluster name, the input array has some empty strings, and if there is no empty string between two indices values, so these values should get together at the same table and if there is an empty string before any string It must build new table of this value.

  I tried something but does not receive not correct logic to do so, below I enclose the vi with the expected results and the upcoming release.

  Thank you

  It becomes more easier if separate you the processing of the input of the Group of the cluster values table.

  See if the attachment does what you are looking for.

  Steve

• Convert 2d table in Jpeg format with intensity color ramp graphics

  I have a chart 2d of some size m x n I want to convert a jpg with the same resolution (IE, I want the jpg to have n x m pixels). I view this table 2d in a graph of intensity. I am currently using flatten pixmap to convert my table 2d in an image and then saving it as a jpg file. Unfortunately the colors don't come out like I want. If I try to use table of colors in the graph of the intensity of the colors come out correct, but erroneous values are associated with colors. I want the color scheme to match exactly what I see on the screen in the graph of the intensity of the jpg, but I want the full resolution of the 2d array.

  I've attached an example of what I'm doing. IntensityGraphColors.vi has a chart showing the table 2d with a color ramp special z-scale, this just vi takes the 2d table and the table of colors on the graph of the intensity and records them in a jpg of intensity. But when I save a jpg file colors come out different, as shown in test.jpg.

  Thanks for the help. I tried searching for similar questions, but could not find any solution that did what I wanted.

  Here is an example that goes from black to blue to white, which will tell you if all goes well in the right direction to do what you want with the entrance of "colors".

  Please note that the colors entry is ignored for the 24 bits of data.

• Table to convert 1 d of waveform (DBL); Convert the table to a 1 d of waveform (LDM)

  Hola a todos soy nuevo in LabVIEW asi os ruego patience, mi duda're basica y annoyingly, como hago para convert a table 1 d in una Forma Onda 'Waveform (DBL)', os editor una imagen y mi VI, Gracias.

  Hi all, I am new to using LabVIEW, so I beg you patience, my question is basic and simple, how to convert an array of 1 d in a waveform (DBL), thank you

  Table of index

  In my view, that the sound VI gives you a waveform for the right channel and one for the left.  For example, you may have to play with the index to determine which channel you want.