Mechanical locking action does not not for boolean within a cluster table

Similar Questions

• Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

  Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

  Hello JPMain,

  Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

  The backup of your iPhone, iPad and iPod touch

  Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

  Have a great day!

• Satelite P50-A-14F - Caps Lock key does not work

  Hi all

  My CAPS LOCK key does not work on my laptop series satellite P50-A-14F. Just realized while writing an email that does not work, so is more or less sudden. Nothing has been spilled on it. Here's what I've checked so far:

  -green light indicating that CAPS is LOCKED turn everything on by pressing the key on the keyboard of the screen
  -Keyboard backlight does not start when I press the button, but it works for the key itself when you press a button any.
  -try a clean boot but no results.

  Thanks a lot for your help.

  Hello

  > Just realized while writing an email that does not work, so is more or less sudden.

  Have you tested the button LOCKING of upper CASE using different software: Web browser, by word or any other editor?
  How about using the external keyboard?

  From my point of view, there are two possible malfunctions: either there is a problem with the software that you use or the internal keyboard works badly simply and in this case, the replacement of keyboard will solve the problem.

  You could test the external USB keyboard. In case the button LOCKING of UPPER USB external keyboard functions, then the internal keyboard needs to be replaced for sure.

• My touchpad lock / unlock does not work

  My touchpad lock / unlock does not work I am on windows 7 and I have hp 2000-2d04se, I tried to install different drivers, but I can't find the settings for locking and unlocking. I also tried to search the website and Q & A different but I coudnt solve the problem. Help, please.

  Hello

  I finally found the solution. I downloaded a different version of synaptics and it worked it is SP61030 I found it on the hp website. Its version is 16.3.9.0. Finally

  Thanks for trying to help

  Kind regards

• Keyboard shortcuts AND Actions does not

  Keyboard shortcuts 1 keys do not work (e, g.  "P" to scroll pen options, 'B' to scroll through brush options, etc...)

  The CNTL + and ALT + seems to work fine. In addition, when I hit 'P' or 'B' selects this option, it does not work through them (brush pencil to the replacement of the color to the mixer).

  I completely uninstalled PS especially remove any previous presets (that sucked) and re-installed Photoshop since I discovered it.

  In addition, actions does not correctly or the other. I have a copyright of metadata carried out screening. I had an action implemented to always update to preset on new or open documents. Given that I have re-installed PS, this script no longer works. I made a new model of metadata from 2016, has recorded a new action and implement the handler for scripts to run on the new and open. However, whenever it is running, the script that I have saved always reverts to "Feature of models" instead of pre-recorded format that is available.

  When I type 'P' or 'B', it selects this option, but does not work through them (brush pencil to the replacement of the color to the mixer).

  Go to edit-> preferences-> tools, "If you're on previous versions": Edit-> preferences-> General

  then Unckeck 'Key Shift tool Switch use'

  

• Shared action does not of course 7 to 9

  All,

  Is there any known issued with not shared actions convert Captivate 7 to 9?

  I'd build one to replay a slide from the start, but now that we've updated the action does not work... and I can not understand how to open it to see what I did in the first place.

  Help with this dilemma would be appreciated.

  v/r

  Jay

  Joint actions have been improved in CP8 compared to CP7, because the variables and literals have been added as parameters. This could be the cause of your problems.

  Recently, I explained two scenarios for slides of Replay, maybe this can help: BACK (slide) - Captivate blog button

• Recovery scenario - vote drive does not match the guid of cluster

  Hi all
  
  Think you can not start your guest virtual machines just because it has a corrupted root system.img image. And suppose that it contains 5 physical disk (which are all created by the model CARS) where ASM on them.
  What is the easier recovery of computers scneario virtual comments (RAC)?
  
  Can this be a plausible scenario to retrieve availability? (Assume that both of the RAC system images are corrupted and we do not prefer a level system rather than backup recovery / restore)
  
  1 create 2 RAC instances using the same details of networking and the hostname that is corrupt. -Use the new 5 different drives.
  2 stop the newly created instances. Place the disks for instances newly created using virtual machine Manager.
  3. Add the old records the image system is unable to be corrected, but ASM disks are still in use (since the newly created instances using VM manager.) for newly created instances.
  4. open the newly created instances
  
  We want that the DSO and CRS have been initialized and be opened without problem?
  
  When I try this script I get the error the cssd/crsd shows.
  
  -Cluster guid 9112ddc0824fefd5ff2b7f9f7be8f048 found in the voting disk does not match the guid a3eec66a2854ff0bffe784260856f92a cluster obtained from the profile of negotiators.
  -Found 0 files preconfigured voting but 1 vote files are required, endpoint in order to ensure the integrity of the data.
  
  What could be the easiest way of recovery of a virtual machine that has healthy ASM disks but image corrupt system?
  
  Thank you

  Hello

  you have a similar problem, trying to clone data bases with 11.2.
  The problem is that a cluster is identified uniquely, and this information is considered in the OCR and voting disks. So exactly these 2 should not be cloned.

  To achieve what you want, simply configure your system in this way, you have a diskgroup separated for OCR and vote (and ASM spfile), should not be restored in the case of szeanrio.
  Only all files in database in ASM will then be exchanged later.

  Then what you want is possible.
  However, I'm not sure that the RAC models have the ability to install the OCR and vote in a separate diskgroup.

  Concerning
  Sebastian

• Multiple actions does not not for DPS

  I created a box and a button. I attributed to two actions to this button:

  

  If I checked the two actions, it works fine in the preview in InDesign, but does not work on content Office Viewer and it doesn't work when downloaded on the iPad.

  If I uncheck a box, it works well in all scenarios. Any ideas.

  Some such actions obtained in another and go to the URL stop sequence. You can play a sound first and then move to a different State.

  I'm trying to convince the DPS team to enable AutoPlay for MSO buttons so that we could create longer sequences and develop effects.

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• NET Accounts, locking threshold does not change. Can anyone confirm if the Net Accounts command has been depreciated?

  I have recently updated our default domain password policy.  After that I updated the threshold of locking to 7 I ran the following command in PowerShell:

  Get-ADDefaultDomainPasswordPolicy

  This shows that the policy has been updated to reflect the change I made.  However, when I run the following:

  NET Accounts

  The threshold of locking does not show change.

  Can anyone confirm if the Net Accounts command has been depreciated?

  Thank you

  Emmanuella

  CrystalBall © SEZ...

  It is a forum for specific consumers. You will find appropriate support for Windows 7 in these forums of Pro-specifique to IT: https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

• Windows 8 disc locked; It does not start at the home screen, will not auto repair and doesn't give me access to safe mode

  Nightmare; perfectly working windows 7 64-bit configuration I upgraded (stupidly) to Windows 8 (it seems installing a 32-bit version for my troubles). I installed a driver for a having previously worked USB WiFi adapter (that is, it was working fine before the upgrade) and now it does not start. It says "irql less than equal", says his collection of information and restarts to a kind of repair mode, none of the options which work because he complains that the hard drive is locked. Any attempt to start in SafeMode (SHIFT + F8) fails, with mnode security options panel shows ever in service options. Really, a very incomplete piece of software - I should know better than to install version #1 what whatsoever.

  Suggestions for moving forward? No, I don't have a record of victory 8 because I updated my installation of windows 7 perfectly work in updating online.

  Simple repair that has worked for me.

  If you have a windows install disc (if you borrow 1 from a friend)

  run the disk at startup, press on f9 to choose cd rom as boot, press a key when it asks you,

  Let the disc to the refreshment of startup repair section, choose Advanced & go to the command prompt and type.

  Bootrec.exe

  Bootrec/fixmbr

  Bootrec.exe/fixboot

  Bootrec.exe/RebuildBcd

  When all this is over, it will show that your o/s and the reader don't worry if it shows as D instead of C, it is because the system resource use C at this point, it will ask you if you want to add this player to your startup type Y and your good to go, your old win 8 will draw upward as it did before spread the word.

• report interactive apex 5, pivot action does not display columns in the application developed on 4.2.6

  I just installed apex 5.01 on apex 4.2.6.

  When I want to use the pivot of the action on an interactive report developed on 4.2.6 the names of the columns does not appear.

  If I add a new column, it seems

  calculated columns displayed

  Thank you

  Hello

  The pivot must be enabled for these columns.  To do this, you can upgrade the application developed in 4.2.6 as follows:

  -Click on the application

  -Click utilities

  -Click on the Application upgrade

  -Activate the IR Pivot should appear.  Click on the number of candidate object

  -You can select some or all of the IRs to upgrade

  Kind regards

  Christina

• Advanced Scripts of Action does not not in the advanced Actions window

  I have no idea how or why it happened, but on some scripts that I applied to some buttons, when I click on the folder icon to open the script in the advance action window, the script does not load. It shows just blank like this (screenshot below). If I try to select it from the dropdown of existing shares, it does not load. If I try to make a new script again, it will work initially, but the same thing happens if I try to open it again. No idea how to solve this problem?

  

  It looks like the corruption of the file. You're careful with naming of decisions and measures? Never use a name that has already been used for another object.

  If you copy an interactive object in a new project, the action in the annex is copied (at least if you're on CP8 or 9).  Normally slides copy and paste in a new project could help, only bit worried on the copy with the actions.

  Have you already restarted Captivate and maybe your system as well? Worth a try.

• Dynamic action does not not on the first attempt to load page. Work after refreshing the page

  4.2.1

  Hello

  I have a page with a list of selection Order_id and a display _item Product_name.  There is action dynamic PL/SQL that fills the element displayed when the order_id is changed. The problem is that when I opened the page for the first time, if I change the select order_id list, nothing happens. But if I refresh the page once, and then it starts work and the display_item is filled.

  No idea what could be the problem?

  Thank you

  Ryan

  ryansun wrote:

  On a more serious note,.

  1 when you load the page for the first time and try selecting the order_id, nothing don't be past, try refreshing the page once and you will see the option to display with the null value. What I do is. I have two tables

  Orders

  1

  2

  3

  Products

  1A

  2B

  2 Z

  3 C

  When I select the command 1, then since there is only one line of products, the displayed item will indicate A populous. If I select 2, since there are two product lines, I should see the list box.

  Doesn't seem to work and I'm sure, I'm doing something wrong.

  Difficult to be certain that as it appears that someone has been editing the page before you start watching (rather than copy the page experience their own copy). Your article P1_PRODUCT_NAME_DISPLAY he a point value / Expression 1 column = Expression 2 condition P1_HIDE_SHOW = 1 condition on that? Or any other condition of rendering?

  These conditions do not match the dynamic actions. They are applied only during the page see the transformation when the page is displayed first; When it is linked to another page; or after a branch to him. They are not applied dynamically during the activity of the user on the page. In this case, that the status is set to false when the page is rendered first, the same element does not exist in the page sent to the browser. If you want these items to appear conditionally because of the interaction with another user control, then you must initially return the elements and control their visibility using hide/show the dynamic actions.

• Confirm the dynamic action does not not as expected in the APEX 4.2.5

  This looks like a bug in APEX 4.2.5.  I have a page with a "Cancel" button that redirects to another page.  There is a dynamic action that fires on the button with a confirmation action and the text ' are you sure?  However, if the user selects OK or cancel in the confirmation dialog box makes no difference - the redirect is always performed.

  I found this question after the migration of a page that worked to 4.1.1-to-4.2.5.00.88 APEX and were also able to replicate on apex.oracle.com here:

  https://Apex.Oracle.com/pls/Apex/f?p=19896:2

  (Press the Cancel button in the top right of the page redirects to page 1, regardless of the user's response to confirm the popup.)

  I don't need someone to suggest the alternative code, I know how to build my own confirmation processing.  I want to just raise this as a bug as possible and see if there is a solution to make the dynamic action works as it should.

  NB I found this in the patch notes for 4.2.5.00.88 on a fix for a similar problem:

  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/Apex-425-patch-set-notes-2186274.html

  15984978

  Dynamic action front-Submit with a confirmation message does not

  Hi Tony,.

  I think the problem is that the action of the button is defined as 'Redirect page in this Application', but it must always be "defined by the dynamic Action" as soon as you have set dynamic actions 'click' to a button. Normally, which is automatically changed as soon as you create your first dynamic action of a button, and I just confirmed by creating a test button in your application that has been defined as «Redirect...» ». After that I created a dynamic action the action of the button is set to "defined by the dynamic Action.

  Is it possible that you have modified the action of the back button to «Reorient...» » ? The question why «redirect...» "does not work, it's that we cannot guarantee in what order the browser will process click on events defined with onclick in the tag button itself and those events attached as a click event handlers. This is why it is necessary that everything is defined as dynamic actions. Only in this case you will be able to cancel the treatment.

  Concerning

  Patrick

  Member of the APEX development team

  My Blog: http://www.inside-oracle-apex.com

  APEX Plug-Ins: http://apex.oracle.com/plugins

  Twitter: http://www.twitter.com/patrickwolf

  Post edited by: Patrick Wolf