Looking for advice on my lab with ESXi 5 free

Similar Questions

• HP ENVY 700-230ea desktop: looking for advice to update for my HP ENVY 700-230ea desktop computer

  Hi all

  looking for advice to update for my 2 year old want 700-230ea descktop

  thought in the following way

  Replace the boot wth drive a fast SSD

  Doubling of the Ram of 16 MB to 32 MB

  Add a better graphics card.

  Just struggling to find compatibel points, so everyone has any idea, what type of memory should I watch so that its compatibility with the existing 2, 8 meg sticks

  SSDS seem to be a source of confusion that mine field that I should look for use as boot drive.

  Graphics card will be limited to what the power supply can turn off, someone knows what it supports current graphics cards go.

  Thanks for any help on this.

  @Paul80, welcome to the forum.

  Here's memory and SSD who are recommended by Crucial memory.  They make great products for OEM computers.  You have to open the case and check of installed memory brand.  Then contact the Crucial Tech Support to see if their memory will be compatible.  The main problem with the addition of memory, it's buy the memory that is compatible with existing modules.

  The best way to install the SSD, it's letting the existing connected HARD disk as it came from the factory.  Connect the SSD drive to another SATA port on the motherboard.  Install the cloning software that you will use on the HARD drive.  Open and select the SSD as target disk.  Once the SSD is cloned, disconnect the HARD drive and start.  The start of shoul for the SSD system.

  As for a video, here is a card that has very good reviews.  Read the reviews to see what users have to say about it.  It should work well with your power supply unit (PSU).

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• You are looking for a new graphics card with 1 GB of memory for Satellite Pro A10

  I am looking for a new video card with 1 GB of memory, preference but is RIMM memory ram in my office, but has a different type of memory in the description of the video cards.

  Is it important at all, the video card would work always?
  Thanks 1million
  Stephen

  I put t know exactly what you want to do, but I assume that you need this card for an upgrade.
  New bad guy! Laptop graphics cards are often fixed on the motherboard and cannot be deleted!
  In addition, you must know that the mobile graphics cards are simply different and you can't compare these chips with adapters for desktop PCs.

  Best regards

• any download of software, I'm looking for the full version of adobe photoshop professional free download

  I'm looking for the full version of adobe photoshop professional free download, no trial key required... can someone help me? I have windows7 installed in my computer

  AFAIK he didn't is not a "full version" of the PS for free.  There are trials but yolu can get the Adobe ones.

  We certainly cannot help you circumvent the licenses.

• Looking for advice for a new user to vmware

  Hi all

  Looking for a help and advice for a rookie to vmware

  We have just purchsed 3 x DL380 G8 each with 8 x 1 TB HARD drive no storage shared, and we are currently approved for most part more packs 2 x.

  What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host. I'd like to reproduce our exchange 2010 essentially server but that is currently on the phyiscal material and I would need to first do a P2V conversion. I also read a few negative articles on running exchange on a virtual computer.

  I had read a little and looks like FT is outside the quetsion because of having not shared storage in place and there is also the limitation of 1vcpu. So I was wondering where to start really. For any tips, pointers, etc. will be very much appreciated.

  Thanks in advance for any help.

  Welcome to the communities...

  As you use Essentials Plus, you can order vSphere Storage Appliance you can use a shared storage. Make sure that the hardware is compatiable with vSA (http://blogs.vmware.com/vsphere/2012/12/major-hcl-changes-for-the-vsphere-storage-appliance-vsa.html)

  What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host

  vSphere HA done for you if you are eligible.

• Looking for advice of vector drawing tablet

  Hi all

  I use CS4 for awhile now (to most of my free time) and have gotten quite into drawing cartoon versions of friends, family, etc. I work just from photographs in the past and have generally used Illustrator to achieve this.

  My results up to now look like this: http://crockstarlimited.com/blog/about/ (sorry, these are the only examples that I have online at the moment). I asked about how to improve my technique for this, and so my question is double:

  1. anyone who has used a drawing tablet (like this: http://www.amazon.com/Wacom-UPTZ431W-Intuos-3-Digital-Writing/dp/B001NANLOI)? If so, do you have recommendations on what to look for or who is particularly good?

  2. does anyone have advice for this style of drawing?

  know how to use Photoshop instead of Illustrator?

  Thanks much for any help you can provide!

  Crock

  Illustrator by far. You have much more control over your drawing in a vector program. Changes are easier. You can still import the PS more later to add effects. All digital illustrators I never contracted with that worked in artificial intelligence without exception. The main file is always vector they can bring an image in PS for some added effects. But the top of the line illustrators can do incredible effects in artificial intelligence without ever entering Psalm

• Manufacturing of the simpler regions on a map of the world... looking for advice

  Hello, I use a card world that initially came is Wikimedia: http://commons.wikimedia.org/wiki/File:BlankMap - World - Microstates.svg or istockphoto, I don't remember which exactly but they are both built in the same way - where each country in a general field is grouped.

  I want to associate groups of different countries in the regions, as in the example of Asia in the image attached to this issue. Countries have thin lines as borders, what I'm looking for the easiest way to delete and merge into a single plan.

  This will finally on the web as an image vector interactive mouseover (have not yet decided on flash or javascript, canvas, svg, vml), so removing the extra points are essential in the size of the file and maintainability.   Advice will be greatly appreciated.

  Thank you

  Court

  (PS: I had actually posted a similar question before, but this card seems to me does not make the process explained to me previously.)  Since each country has it's own/track of the border, I can't use the Scout to solve)

  I still don't see your image after, but one thing you might want to check before you apply the pathfinder is to see if the accident vascular cerebral/sketch of the country has been extended to a path and if so, make sure that you also select those with the forms of the country. I came across some images of stock vector map, which is the case. If this isn't the case, and your forms simply do not match very well, a quick way to get rid of all the borders remain unwanted would choose the resulting shape you created using Pathfinder and selecting the brush of Blog (assuming you have CS4) with her has the same color as the fill color of the shape you want and just painted on gaps. It would be much faster to try to remove it with the pen tool.

  Larry,

  The OP is looking to reduce the number of control points in the image.

• HP 280GI: I am looking for a firewire which works with mirror of HP280GI PC Tower. Help, please

  I'm looking for a FIREWIRE port for my new HP280GI OFFICE. Please update me

  Deredman, welcome to the forum.

  Here is a card that should work with your computer.  It requires a vacant PCI Express x 1 slot on the motherboard.

  Here is the computer Service and Maintenance Guide .  It shows available on P. 1.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Just bought a Nikon D7200 camera.  Had a D7100.  With the help of ElemenD7200.  I can't go to 14 items because I have Windows Vista... platform not supported by Vista.  Looking for something to 'trigger' me with a new computer due to the fact that Vist

  Just bought a Nikon D7200 camera.  Had a D7100.  11 of the components support the camera.  Using of 11 items, the D7200 will not import the RAW files.  I can't go to 14 items because I have Windows Vista... 14 platform not supported by Vista.  Looking for something for me to 'trigger' with a new computer due to the fact that Vista can not do a bunch of stuff, so I ordered one with 14 elements.  @ I understand that 14 elements does support the Nikon D7200 because it comes with Camera Raw 9.1.   Is this correct?

  Yes PSE13 or PSE14 will support the D7200

• Student looking for advice

  I am the proud new owner of Adobe Production Premium and want everything to work as easily as possible. I hunted around for some and found a few recommendations, but many of them are simply not practical for my situation and budget. My hope is that members of the forum can help me understand what my options are.

  Material

  So, what I have for the material is not the greatest, but it was also good that a deal I could get at a price I could afford:

  Dell XPS 15 with an i7-740qm (1.7 GHz up to 2.9 with mode)

  6 GB of RAM (I'm sure that of 1300)

  NVIDIA GT 435M

  600 GB 7200 RPM HARD drive

  (750 GB 5400 RPM HARD drive (external USB 2.0) - not very useful for video editing, I know )-I don't know how I ended up dating Best Buy this one. I knew from the beginning that I would like something more quickly. Moment of weakness I guess.

  As a note, the XPS 15 has 2 USB 3.0 ports and one of these ports eSATA/USB combo. So here's my connection options.

  Budget

  Basically, my budget is as "as good as I can get while being affordable as possible." I'm willing to spend as much as I need to have the experience of a workflow that is usable. If people could give me an idea of what I might get to vary spending varies between $100 and $1000 would be great.

  I can't spend a lot, but I'd rather spend a little more to buy something that would work well, as opposed to the bare minimum expenditures and get something that barely works.

  What I'm working with

  Mostly 1080 p AVCHD from Panasonic hmc150. I know that can be a bit much for my system, but a guy can hope, right? I peut (but not too likely, especially if I have to spend more than I was expecting for the edition of solutions) buy my own camera and use it. In this case, it would almost certainly be a (T3i/T2i) DSLR, which as I understand it got too difficult to work with codecs.

  I use my system to edit video, create effects visuals (more or less complex, including the 3D compositing) and live action, as well as all other tasks related to the creation of films and videos.

  I'm looking for

  At this point, I can't not realistic look at the purchase of another computer. As I use a laptop, there is not much I can do to upgrade options either. So, I hope that what I have is it usable. If what I absolutely will not work, I guess I'll have to consider shooting in 720 or * shudder * SD .
  What I'm looking for so is hard drives. How do I absolutely need, what I should get, and how do I configure my system/Adobe to better use the readers I have and would need to get?
  Experience up to now
  I tried a few test footage with my setup current (all on the internal drive) and comes to the conclusion that I should probably make something. It seems that as soon as I start to do anything After related Effects or add simply no effect whatsoever, my system starts badly. It makes me wonder how can my school of aging of the Mac Pro with pitiful amounts of old dated pretty processors and RAM manage working with the same images in FCP. In this case the film is stored on the server of the institution, that I don't know the technical details.
  So, apologies for the post of ginormous and sincere hope that someone (s) can help me understand this stuff.
  Thank you very much!

  WD Scorpio Black 500 GB 7200 RPM 16 MB cache car has an EXCELLENT overview of the result of Newegg users and a 5 years wtty. ; It costs $69.99. (I would recommend only)

  With regard to your external drive 5400 RPM, Yes, it would be great for backups.

  Jim

• If you are looking for how to encrypt PDF with certificate

  Hello

  I'm looking for any documentation that explains clearly how encrypt/decrypt; in my case:

  -a person does PDF (with her small hands and Acrobat 9 Pro) and to quantify;

  -the document is attached to a Microsoft Sharepoint Portal;

  -users who have the certificate on this computer can read.

  The idea is to secure the documents inside the area and when the users come back home with a key player that contains an encrypted PDF file, they cannot read.

  I tried in several ways: using AD local certificate made with Acrobat, but even on the same computer with different user profiles, I can encrypt, but not decrypt.

  Any help would be appreciated.

  Please tell me if I am not clear, my English is bad, but my wife is beautiful.

  See Chapter 15 in this doc http://learn.adobe.com/wiki/download/attachments/52658564/acrobat_reader_security_9x.pdf?v ersion = 1

  Of

  http://learn.Adobe.com/wiki/display/security/document+library

• You are looking for advice or suggestions: Vmware View 4 lab on workstation 7.

  Hi guys,.

  I want to build a new laboratory virtualized on a new desktop that I ordered.  I especially want to us to do tests and the growth of knowledge on Vmware View.  I have a desktop HP on order with an i7-930 processor and 16 GB of RAM.  I also have a 7 of my cert VCP 4 Workstation license.

  I already know how build a virtualized ESX environment and allow the MV nested within this environment.  My lesson plans are to build two ESX 4 virtual machines, a VM vCenter, a virtual shared storage as a storage device and a server VMware View connection.   I think there should be enough resources on this box to have a work environment (although maybe slow).  I plan only to have two virtual desktops (XP).  I don't need virtual machines to do something more than it is, run and be able to communicate with them with PCoIP XP.

  I was hoping someone else might have already tried this and had no additional details.  If this isn't the case, I'd love to hear any suggestions.  I intend to document this lab and I'll be happy to share this document with everyone when I'm done...

  Best regards

  Rick

  I have implemented this on a laptop several times. Laptops have 8 GB of memory and it was barely enough to make it usable. ; Your 16 GB of system memory and faster CPU will give you much more room to breathe

  Tip: I cut about 20% of the CPU usage on the ESX host nested running under Workstation 7 on Dell D830 computers laptops with processors T7250 in manually choosing the type of VT for ESX hosts nested rather than leave the setting at the default of Automatic.

  Also, if it is not necessary to VMotion, you could get a super-quick card Flash or SSD and point that flash all the temp, swap files and VSWP files. SSD. Someone has recently published an article on the difference in speed - Google and you will see what kind of speed increase you could get out your configuration if you are willing to spend that kind of money for quick storage.

  Datto

• Almost done with my first vid. Looking for advice on the ending credits...

  What I would do for my closing credits, before the band title turnover is to introduce viewers each actor with a 3-4 sec clip their main role in the film without sound (except the background music) and then pause the clip for a few seconds, all text rolls with their name. Not sure if I explained myself well enough, but of course at this point I won't have a problem cutting the clips of the film to be placed at the end, with no background noise (under music). What I can't understand is how pause the video at some point while the music audio is still rolling and then be able to overlay text next to the actor. Thanks in advance.

  Steve

  I think it's more effective.

• Looking for advice on the problem of stylesheet to inline (with IE).

  I use the following CSS online in my articles multiselect attribute of the form element to HTML - use: style = "height: 274px; width: 300px; " -to lock the size of the element and keep him autosizing.
  
  I found that this element is not correctly displayed in IE unless the "height: 274px;" is removed from the CSS line. I can't remove that firefox does not correctly without him.
  
  It seems not that I can refer to stylesheet classes (class = ' MyClass') since the attributes of elements of HTML form to a list item multiple selection (using different style sheets for IE versus non - IE
  
  + < link rel = "stylesheet" href = "" #APP_IMAGES #styles.css "type =" text/css"> +"
  + <!-[if IE] > +.
  + < link rel = "stylesheet" href = "" #APP_IMAGES #styles_IE.css "type =" text/css"/ > +"
  + <! [endif]--> +.
  
  in my def page).
  
  Maybe someone has any ideas how I can fix it?
  
  Thank you!
  
  Paul

  I have to close for the day now.

  What I said was:

  >
  I have in fact was to add the following in the HTML of the page header:

  
  >

  followed by adjustments to specify different lists.

  AND

  >
  I set the width of the lists on the setting of the attributes of the HTML Form element:

  style = "width: 300px;"
  >

  SO:

  <style type="text/css" >
  ...
  </style>
  

  go to header HTML of the page parameter

  and:

  style="width:300px;"
  

  go to setting attributes of the Form HTML of the element element

  Andy