Manufacturing of the simpler regions on a map of the world... looking for advice

Similar Questions

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• Using NAT, the host looking for viruses?

  After installing a virus (Avast) in Guest XP64 auditor in Vista 64 host and using NAT, I was wondering if the host has been looking for the virus before it past internet data to the customer?  This would make unnecessary the use of a virus checker in exercising of rose-> comments.  I doubt it, but it seems worth asking.  Thank you.

  of course not - it's just a simple NAT service - happening packages based on IPs - it does not inspect packages

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Whenever I boot, I get the messages looking for missing drivers - how can I get rid of them?

  Clean boot manager programs.  Now get the following messages-

  (1) c:\window\system32\mvmctray.dll lack of entry nvtaskbarinit
  (2) c:\window\system32\nrcpl.dll entry - nvstartup
  Already tried to clean using the registry Manager.

  Reinstall the drivers

  Those who seem to be Nvidia drivers.  If you have a card Nvidia GFX download and install the latest driver for your motherboard

• failure of the system, looking for answers

  Need help for the guys. Had a major failure of the system last week, and I'm a bit confused as to what happened and why I was unable to get free. I lost a bit of my confidence in Vsphere, and I'd like to renew that.

  A bit on the environment, esxi 5.0 U1, with servers HP Gen 8 3 node cluster running. HP P4500 SAN iscsi for vmfs data storage. ESXi is installed on HP's CF cards in servers. This cluster has been upward and running for about 6 months, not a single hiccup before that.

  Wednesday we have migrated 2 of our vm (SQL and progress) to this cluster 5.0 database, the virtual machine went on different hosts in the cluster. The virtual machine was running on a cluster 2 older nodes with esxi 4.1 U2. Machines migrated fine, fine tools updates, reboot, everything seemed fine.

  About 2 hours after that the migration, we started to receive calls that our Progress database is down, users could not connect. Then we started getting more calls, other machines were inaccessible. Glancing from vcenter I could see all the virtual machines in question were on the same host, and I was unable to open the console in vsphere for VMs on that host. The host showed he was connected, showed all the vm connected, but I could not open the console or the desktop remotely to one of the VMs on that host. I started studying, and of course this host fell all the SAN Iscsi network connections. The railways have shown dead. Ports of nic card viewed active, the switch ports showed activity, but the connections were down. I could always ping the address of management for the host however, and ports for vmotion were in place.

  At this point, I started to try and vmotion VMs on that host data base progress, he would not migrate, just sat at 8% prepare to migrate. I tried other virtual machines with the same result. I started to wonder why HA had not kicked, and why I couldn't move anything. At this stage the host started disconnecting from the cluster. I could always ping on the host, but vsphere showed as disconnected. I couldn't move my VM, and I couldn't go to the host via vcenter, via the vsphere client pointed directly to the host, or by using the DCUI.

  So I called VMware support, got an engineer on the line with me, and it became clear we were going to have to power cycle that host and crash all virtual machine running on it. It wasn't a very pleasant for me answer because this database of progress is our main production system, and I was afraid of corruption. We had no choice, so we did. When the host came back upward, fortunately the virtual machine came very well. VMware engineer digging in the newspapers and said that this was with a particular NIC card driver with known issues. He showed me the KB on this issue, and it seemed to be a known issue. We have updated these drivers on all hosts, and that's all.

  My problem with this is that, how is the cluster ran fine for 6 months without problem, and how come the redundant path to the SAN did not keep the connection active when with the path with the bad nic card driver failed? I have 2 different, with 2 NICs different paths for the Iscsi SAN. The other card had no known driver issue. Why both paths failed not just in cause of a driver on one of the cards problem? More worrying is also how is it that I could not immigrate anything, and why no HA kick in?

  Sorry for the novel here, but without all the details is not part of a story. My biggest concern, that's why I couldn't move anything? In the event of a host failure, what you're supposed to do in order to migrate the machines if they don't migrate via vsphere client? We were down for about 2.5 hours, and a lot of questions were thrown on me the senior management as to why my "system available, redundant high" took hours to retrieve...

  Guys here any ideas, thoughts on how I would have handled it differently, reasons why I should be confident everything is fine now?

  Thanks for your time

  Kevin

  trink408 wrote:

  Thanks Matt.

  I guess some of the problem is not completely understand how the HA or Vmotion. I was under the impression once that the virtual machine was not reachable HA wouldn't kick and move the virtual machine? The virtual machine was not to ping requests or accessible by the Office remotely. I couldn't get their power off or do anything through vcenter either.

  If they had no link usable storage, this seems possible.  HA simply does not address the failures of storage.  Not at all.  It IS possible to activate at the level of the VM HA, but it isn't on by default - must be activated on a per-VM basis.  You should read the book by Duncan Epping on this - it's the bible of the AH.

  So in case something happens with the connection of storage, you have really no way to vmotion anything right here, and your only option is to kill the host / VM running on it, and then migrate or leave HA move them?

  Fix.

  I didn't know that I wouldn't be able to vmotion virtual machine if the host has lost its connection to storage. The other hosts in the cluster saw storage.

  The source host is controlling these VMDK, as far as the other guests are concerned (they see a lock on the file) and when they ask the host if its still alive, he answers (because it has not powered the network lost or down, which are the failure mode THAT HA is designed to handle). So they take charge.

  The reason why it took so long was because I didn't kill the host with my concerns for the database. I was hoping that the VMware engineer may have a way to gracefully close things down. So he spent some time looking around and trying to determine what was going on. Ultimately we just power cycle the host, so I could have done much earlier, and if we are facing this again in the future, I would.

  As long as you follow the seller advised for more decent databases (keeping the transaction logs, etc.), don't have good backups, theres no real risk of data corruption.  VMware does not significantly change the i/o path, in order to have the same exposure than on a physical host.

  I still do not understand why the two paths were marked as dead and the host completely lost connection to the SAN, as well as to show finally disconnected in vcenter.

  Well the host went offline because it got stuck in an all-paths-down scenario, which is common for 5.0.  5.1 solves this problem a little.  I don't know why all roads fell, but I suspect that you have a misconfig somewhere... normally you expect at least 4 paths in a system set up correctly on the left.  Check with HP to ensure that you follow best practices.

  Maybe all the IP stack has been corrupted or something?

  Possible, of course, but unlikely.  Never heard before.

  I appreciate the help and the preview, I thought that the problem was a lack of understanding on my part and fully accept it.

  HA and vMotion are complex.  At least now you can go back to mgmt and tell them why he fell more (because it was a failure outside the scope of the software scenario) and may ask for money to build a proper SQL cluster.  Definitely recommend the book of Duncan Epping: http://www.amazon.com/VMware-vSphere-Clustering-Technical-Deepdive/dp/1463658133/ref=la_B002YJMRCY_1_2?ie=UTF8&qid=1363622697&sr=1-2

• Which past now and not days ago = > publication of text captions with anti-aliasing off the coast looking for really bad.

  I reported the bellows of text and I'd like to know if it happens to someone else.

  Concise problem statement:

  When you publish buttons with text or text with antialiasing off the coast, the result is very bad.

  Last project I cancelled 2 months ago and it seems good. But when I did a few changes yesterday and I published it again all the buttons and links that they looked very bad.

  I tried with different computers, where they have installed captivate and I have reproduced the bug how I show below and in any place of same problem.

  I can't show the client the changes because the evil look textfields.

  I tried to reinstall all the options, Captivate and install older versions of flash and nothing plugin, everything looks the same. Probably a windows update may cause the problem, I don't know.

  
  Steps to reproduce the bug:
  1. black background or dark color
  2. create the button and select Properties
  3. Select the text color color yellow or clear, size of large font (24-30) and transparent background
  4 publish

  Results: no text no embattled arround White halo, eat as the text. The part of the text is a bit fuzzy.

  Resemble the translucent color part of the text to produce somehow anti-aliasing is white in color.
  
  Expected results: the net image as html on browser text.

  Hi again

  Well, it give a try.

  Minimize all applications that you can see the desktop.

  Right click on the desktop, then select Properties.

  Click the appearance tab.

  Click on the effects button.

  You see an option called use the following method to smooth edges of screen fonts?

  If so, disable the option and click OK.

  Report back if you still have this option and, if so, if you erase it helps.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• The product key you have entered seems to be the software that was preinstalled on a device. Contact the manufacturer of the software device for recovery options

  my pc is dell

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• BlackBerry Smartphones how can I STOP the storm looking for new e-mail messages?

  I've had the storm for a few days now, and it's my first BB, so maybe it's why it looks like such a simple question.

  Here's the question: I created 3 accounts on the storm, and they work fine. However, when I'm at work or at home in front of a computer (which is most of the time) I am not interested in having the choice of the storm to the top of every email that I receive because I'm reading them on the computer and then I have to delete them on the storm. I would like to be able to check your email on the storm only when I want, but I can't seem to find the setting that will allow for this.

  A little help, please!

  Thanks in advance,

  -M.

  I have a similar situation as you and there is a way to stop the emails any time. Go to the full menu and open the installation folder. Open here the e-mail configuration. Your email accounts will appear in the upper part. Highlight the one you want to temporarily stop and pop the menu and select filters. There are two options. Foward messages on device and do not forward messages. Do not transfer the right choice. They then record at the bottom. You can create a shortcut on the home screen moving the installation of e-mail folder if you can access this option quickly on a daily basis.

  I hope this helps.

• I lost the toolbar, looking for a way to eliminate the preview pane below the list of emails.

  To try to eliminate the preview pane (which I don't like), I accidentally removed the toolbar at the top. Since he's gone, I can't get the 'tools' option, and so I would like to restore it. How?

  Press Alt or F10 to restore the menu bar.

  Press F8 to toggle the message pane. There is no such thing as a "preview pane".

• In FF 7.0.1 the new tab on the band on tabs disappeared after clicking on the icon of the tab group button and try to return, I'm looking for advice on how to get the new tab to reappear on the Strip to tabs.

  In Windows Vista, FF 7.0.1 I've selected the button tab group to try out it. However, when I chose the button group of tabs to close this point of view, the button tab in the strip of the tab no longer appears. I'm a request for assistance to restore the button new tab (the sign '+' on the subject) on the tabs to the right of the tabs open tape.

  You can find the button new tab showing as a '+' on the tab bar.

  You can open the window customize and drag the button new tab that indicates that a sign plus bar tabs on another toolbar and it will become a regular tools like the new button bar button tab you have in versions of Firefox 3.
  
  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

  If you can not find the new button tab then click the button 'Restore Default Set' in the window customize.

  If you would like the button tab at the right end of the tab bar, then place a flexible space to the left of it.

• Safari does not display the images (looked for fix, tried many things, can't find one that works)

  Hello

  My safari will display all the images, for example Google Logo, image profile of everyone here and much more.

  So I was wondering how I can fix this problem?

  Either way, I have 3 accounts on my computer, works on the other two, but not mine.

  Thank you!!!

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Menu "develop" will appear in the Safari menu bar.

  Click 'Expand' in the menu bar and make sure that 'Disable the Images' is not enabled.

• Looking for advice on navigation in the TestStand API.

  I use TestStand for a few months now (self-taught using a LV architect with experience of the TS) and I think I will do certain things programmatically at run time and finished watching the massive array of properties/methods, etc. and ask yourself who are the properties/methods that will allow me to do what I have in mind.  Is there something fundamental missing in learning to understand which path to take to get down to the specific class and property/method interests me?

  For example, at the moment I am trigger some additional operations on the process model in addition to running the main client generated when you enter Test DUT. I would like to be able to programmatically from within TS itself, or more probably of LabVIEW or hide these tabs when running... I guess it's possible.  I know that executions can be set initially hidden but a search for 20 minutes of the API not immediately revealed magical items to let me do this programmatically.

  Hey, smoke,

  The ApplicationMgr TestStand is located within the TestStand UI control server. To access the Application Manager, you first need to action a step ActiveX (because it is an ActiveX control) and RunState.Engine.GetInteralOption (InternalOption_ApplicationManager), you get a Manager Application object.

  Example:

  "Select the Module tab then under Automation server" NI TestStand XXXX UI controls (Ver X.X)

  The object reference"RunState.Engine.GetInteralOption (InternalOption_ApplicationManager)

  Class object' ApplicationMgr (IApplicationMgr)

  Get the property executions

  Which returns an object reference and class performances, thus, create a variable(Local,FileGlobal,etc) of object reference to use to retrieve the properties of the Application Manager.

  Also note that to get the individual properties of your Application Manager object you won't be ActiveX measures for the properties you want.

  I hope this helps.

• Join the link looking for 1 person not edge com.

  I was given a link to return to and every time I use it, a different person appears instead of the person I want. How to get in touch with who I had before.

  It is not possible.  To give you the absolute best possible answer you are routed to the first available person and details of your will automatically appear on their screen.  This is known as a system of ACD (automatic call distribution, these days used for phone/email/chat and even tweets from roads these days).

• Whatever the sysbol looking for TV stand for?

  I had the cache memory/HD/wireless off today to do a little cleaning. According to me, that there is a space for a 2nd HD. I also noticed a space that looks like a PCIe card slot which has a picture of a TV below? What can be put there? A TV tuner card?

  Thank you!

  Exactly