looking for driver for xHCI hub root 0 (PCI 3.0 card) in Windows 7 Pro

Similar Questions

• Error - looking for help to recover or restore my data reading disk Windows 7

  My Windows 7 Pro machine restarts automatically while I had an open browser window (I didn't actually see it happen) but now I just see a message that says "a disk read error has occurred. Press Ctrl + Alt + Delete to restart» By pressing this key sequence does nothing. Just see a black screen with this message.

  I have booted from the CD of Installation Win 7 then went to repair. I tried to do a system restore, but no restore points could be found, so I chose the first option. No bones were listed in the list. A few diagnostic tests was performed and I looked at the details. The series of tests except the last System Volume has been altered. It says to reboot to see if that could fix the problem. Unfortunately, it does not and I still see the same black screen with the error message. BTW, as you know, I can't start in safe mode. Also restart on a Win 7 CD now is no longer gives me an option of just complete repair install. I tried to use this boot drive as one secondary drive on another machine to Win 7, but the OS tells me I need to format the disk before it can be used.

  I'm willing to put in the time to try to get the data restored on this boot drive, but don't know what I should try next. Reload the operating system completely wipe the file allocation table and make the data unrecoverable? Please notify.

  -darksquare

  Thanks for the help everyone. I was able to restore all my files to the best of my knowledge. Just a quick overview in case others are experiencing a similar problem:

  1 SSD with Win 7 wouldn't start. Message displayed "a disk read error has occurred. Press Ctrl + Alt + Delete to restart» I restarted the machine and went into the BIOS to check that the drive was detected, which it was.

  2. started to Win 7 install DVD and select the repair option. Ran chkdsk on the drive affected with FixMbr and FixBoot, BootRec. I tried to restart after each of these executables, but he led the original disc reads the message. Along the way, the error messages I received were that the System Volume was damaged and Windows cannot recover master file table.

  3 reinstalled Win 7 on a separate startup disk (HDD) and mounted the SSD corrupted as a slave drive. Win 7 brought a dialog box to reformat the SSD drive as the data seem to be unreadable. Has rejected the format option. At this point, I am unable to browse the files on the SSD via Explorer.

  4 pitted some tools part 3 the SSD which indicated that the partition table on the disk doesn't have the hexadecimal value of appropriate endpoint.

  5 Ran chkdsk /r. Finally, some luck. This process lasted several hours and repair the files of nearly 1 million. The reader become navigable via Explorer. The directory on the disk structure has been restored and files (so far I have not found the missing files).

  -darksquare

• Drive hard new Compaq 100 getting b Small Form Factor PC Windows 7 Pro error too small

  I have a Compaq 100 b compact PC running Windows 7 Pro and I am trying to replace the traditional hard drive with a Solid State hard drive due to an imminent disk failure error I get. After installing the new drive, I put the system restore disc in the drive and when it gave me the option to restore the drive to factory settings, I clicked 'Yes' I then get an error that says "the hard is smaller that the original disk in the computer, cannot continue.", or something very similar. Anyway, it gives me no options, only to leave the restaurant. What can I do about it?

  Hello:

  Recovery discs do not work on a smaller hard drive.

  This works...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Looking to download a 64-bit Microsoft Virtual PC version that works on Windows 7 Pro, 64-bit operating system.

  From what I've been able to 'collect', Microsoft Virtual PC may not be compatible with 64-bit operating systems, but if it is true, that I can't seem to find a version of downloadable copy of 32-bit that I can install on my HP Pro Book G3 450 who will install properly & appear in the "Programs and features" section of the control panel possibly listed as: "Windows Virtual PC.

  NOTE: my laptop operating system is: Windows 7 Pro, 64 bit.

  All the tips useful on this topic will be useful, & thanks, Chris Canfield.

  Microsoft provides two specific versions, Windows Virtual PC 32 and 64 bit for PC running Windows 7 32 or 64 bits respectively.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=3702

  You can use the 64-bit package to install and run 32 and 64-bit operating systems.

  Windows6. 1 KB958559 - x 64 - RefreshPkg.msu

  But you must install the package of law for your architecture.

• How to install the driver of usb hub root without keyboard and mouse?

  I uninstall the driver from root of WIN7 usb hub, then USB keyboard and USB mouse are any work stoppage. Who can tell me what I can to recover?
  I try to restart the computer and no PS/2 interface. Thank you.

  Solved the problem after I restart the computer.
  I found a few time-try is "hiberate", not power down...
  The press shortly power button works hiberate, I changed to growing long, and then restart the computer and the problem was solved.

• looking for a HP Pavilion p7-1045-compatible graphics card

  Hello, is there good compatible with my HP Pavilion p7-1045 graphics cards? last time I installed a graphics card (which was a 750 GTX), the computer freezes at the blue HP screen and starts to beep 5 times only and turns off. power was not a problem, since I managed has replaced my power of 250w with a 600w.

  then there all graphics cards right? my budget is about $150 (in Canadian dollars). Thanks in advance

  You are right.  The VBIOS hybrid will work with a standard BIOS and UEFI.  However, the length of the card is 9.84 ".  I am not sure that it will not go in the space provided with good air circulation.  You can make a model of the size of the card to see if it will fit.  I would like to apprceciate hear the result.

• I need help for any moment of recovery and re-setting updated to Windows 7 Pro home

  MY HARD drive crashed.  I don't know where to find my code to use the Express upgrade to return to Windows 7 Professional that I had already purchased Home Premium Online.  Any help?  The support of the Web site has been less than helpful.  I spent $99 on it, I want to just return.

  The product key must have been sent to you. If you had registered with a Windows Live ID account for your purchase, you should be able to recover the product key.

  Sign in to your account with your Windows Live ID (if you have it when the PIN has been entered) to access your product key, you can check your email for the confirmation e-mail you received when the PIN has been consumed to access your product key.

  3 contact support if you have any questions: www.windows7.com/getkeysupport.

  Why should I use my Windows Live account or create a new one?

  Using your existing Windows Live account, or create a new account will give you access to your key product at any time online in the future. It is important to use an account and a password which you are familiar with to allow you to get easy access to your information and to receive the confirmation e-mail which will include your product key.

  Will send me you a confirmation email with my product key?

  Yes. An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.

  What happens if I lose my product key?

  If you lose your product key, you can return to www.windows7.com/getkey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  Once you have recovered your product key, reactivate your license of Windows 7 Home Premium, then repeat the Express upgrade.

  First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

• Looking for the installation package "AcroPro.msi" - my computer says it is already installed, but I can't find or enforce

  I am looking for the installation package 'AcroPro.msi ".  I had already installed Acrobat Pro XI, but he seems to have disappeared, although the computer says it is installed.  Where can I find this installation package?

  I use Acrobat Pro to save documents as pdf files, mainly tax statements and the documents provided to clients

  Hi Billström,

  What was the Acrobat version installed on your machine.

  You can visit this link to download the version of Acrobat you have: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  If you have windows, click Start > in the search box, type Adobe Acrobat and wait and see if you have Acrobat that are listed there, or you can visit \Adobe\Acrobat 11.0\Acrobat C:\Program Files (x 86) and search for "Acrobat.exe" or "Acrobat". He should be here if you have already installed Acrobat.

  Kind regards

  Ajlan Huda.

• HP 250 G5: upgrade Windows 7 Pro for Windows 10 Pro with HP 250 G5

  I bought the cell phone following the Friday (19/08):
  http://store.HP.com/UKStore/merch/product.aspx?ID=ECC_BUNDLE_6082661&opt=&SEL=NTB

  I see from the description that it is said:
  "Windows 7 Professional 64 (license and includes support for Windows 10 64 Pro).

  And further explained:

  "This system is preinstalled with Windows 7 Professional software and also comes with a license and support for Windows 10 Pro software. You can only use a version of the Windows software at a time. Switching between versions you need to uninstall a version and install the other version. You must back up all the data (files, photos, etc.) before you uninstall and install operating systems to avoid the loss of your data. »

  However, I received no media with the laptop. I know there is a guide on creating your own Windows 10 courses to http://support.hp.com/us-en/document/c04876361 installation media, but as it is an upgrade to Windows 7 Pro for Windows 10 Pro, and we are now outside the free upgrade window, I want to check if those who are indeed the right way ahead.

  Thanks for your help!

  You should have received the Windows 10 Pro media as described on the auction site. This media can be in a plastic bag that came with the computer. Please go through all the material supplied with the computer. If you are unable to find the Windows 10 media, please contact HP Customer Support in your region for assistance.

  Before installing Windows 10, please make your restore media Windows 7 Pro.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Audio SR.___No after new hard drive and reboot with windows vista pro form xp in hp slimline s7727c.

  have a hp pavilion slimline s7727c. hard Dr failed. Puy in identical new WD3200aajs old. reinstalled xp pro OS instead of vista home. everything works well after update driver nvidia to the system. a realtek HD AC97 audio when new. with controller audio generic SDO installed. have tried all drivers realtek has unsuccessfully, have now no audio and the system recognizes only not the controller is installed on the card. is there a solution? as a now-defunct windows driver or file which has been in the vista system that caused his work? looking for a solution. No PCI spare parts, only a slit, which contains card Tel/fax. Thanks for the help. Bill Huff Sr

  Hi billhuffsr,

  Run the patch from the link below: diagnose and automatically repair audio playback problems:http://support.microsoft.com/gp/no_sound

  Also, try the steps from the link below: how to fix sound problems in Windows XP:http://support.microsoft.com/kb/307918

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You are looking for the driver for «Toshiba Multimedia Center Audio/Hub» floppy

  Hi all

  I'm currently looking for driver for my Toshiba Center Multimedia Audio Hub, because I lost the installation disc.

  Can someone tell me where to find the driver? Or everyone is nice enough to load the driver disk?

  Thanks in advance.

  Hi firefox123,

  Go to the driver download section: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  Then select:

  Options--> Office based accessories--> Multimedia Center--> OS independent

  Best regards

  Maurice

• Please recommend what to look for in an external drive for my Macbook Pro

  I don't have a lot of data, but I'm a writer and want a back up of novels and photos and photo projects. Can someone knowledgeable tell me what to look for in an external drive? I said to get one with a fan, but have seen highly recommended to those without a fan.

  Thanks in advance,

  NanaCA

  If portability is a requirement, such as this storage drives will do:

  http://eShop.MacSales.com/shop/FireWire/on-the-go

  If the HARD disk will live on the desktop all the time, your choice increases.  Here are a few more examples (and there are more):

  http://eShop.MacSales.com/shop/FireWire/EliteALmini/eSATA-FW800-FW400-USB

  http://eShop.MacSales.com/shop/FireWire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  The fans are not always essential if the design of the enclosure is made correctly.

  There are many publishers and other options are available, but OWC is a good seller with excellent customer support.

  Note that anything that is stored on a disk external HARD must also be safeguarded if the data has the value.

  Ciao.

• You are looking for an internal DVD drive for a Satellite Pro A40

  Hello

  I'm looking for an internal DVD burner for a model Satellite Pro A40 2.88 Celeron with a currently installed CD-RW/DVD-Rom. My mother is the owner of this laptop and I want to upgrade the drive for her.

  Does anyone here know of any number of model of the DVD-RW/CD-RW/DVD-Rom that is compatible with this model.

  I want the drive to function as a DVD-Rom/CD-RW also because I do not want to lose these features. Swap the bezel above if necessary isn't a problem for me.

  Thank you

  Hello
  For this particular model, I could not find another A40 Pro which has a DVD - RW, only DVD ROM. I also suggest to buy an external DVD - RW writer because an internal hard drive will cost much more. Probably triple what external there. External, you can find for about 50 but internal will cost at least about 90 more taxes. I'm sure it is internal that correspond to this machine, but at the moment I don't have the time to research each compatible model search of the car, it's why I suggest an external drive. I hope this helps.

• Looking for a CD/DVD drive used for satellite 1700

  Hello
  I'm looking for a CD/DVD used maximum 24 x 8 x speed, speed, 5.25 inches for the computer player satellite phone S1700-500.

  If anyone has it or knows where to find one, please contact me!

  Thank you
  Mark

  Hi Mark

  This kind of things you can find on a market online like ebay. You will find a large number of hardware components used. Before you buy something check exactly which components work well with your laptop.

  And now the final question. How you want to do this 5.25 inch drive working correctly with your S1700?

• Driver cd-rw/DVD-ROM looking for a satellite Pro 2100

  Hello

  I'm looking for the driver for the cd-rw/DVD-ROM
  I installed XP Professional
  I'm enregistred the Toshiba site and download all the drivers I
  can to my laptop
  but I don't have the driver for the cd-rw/DVD-ROM

  Default xp installed this driver
  Toshiba DVD - ROM SD-C2502 V1313
  but just do dvdrom and I can't use the CD - RW
  Could you please help to have the driver
  I downloaded all the drivers for the toshiba support site
  But no nothing no driver for cd-rw/DVD-ROM

  HI Ab,

  There is no special driver for the optical drive of your computer laptop just the drivers Microsoft standard supplied with the XP operating system.

  Make sure you have the "Enable CD writing on this drive" box checked for your optical drive. You can check this by selecting my computer then right click on the optical drive, select properties and then click the recording tab.

  Kind regards