Loop "getting address ip" WiFi

Similar Questions

• How to get address IP WiFi BlackBerry 10

  I want to get the WiFi ipv4 address in blackberry and write these codes that are referenced in others as below, it worked in my Dev Alpha C but I have no other devices to test.

  However, it doesn't seem to work in the Z10 or Q10.

  Is the interface of network, also called "bcm0" in the Z10 or Q10?

  Is someone knows it this problem?

  Thank you.

      foreach (const QNetworkInterface &interface, QNetworkInterface::allInterfaces()){
  
              qDebug() <<  "humanReadableName: " << interface.humanReadableName();
              //if(QString::compare(interface.humanReadableName(), "en0") == 0){
              if(QString::compare(interface.humanReadableName(), "bcm0") == 0){
                  foreach (const QNetworkAddressEntry &entry, interface.addressEntries()) {
                      if (entry.prefixLength() <= 32){
                          wifiIP = entry.ip().toString();
                          qDebug() << "IPv4: " << entry.ip().toString();
                          return true;
                      }
                      else
                          qDebug() << "IPv6: " << entry.ip().toString();
                  }
              }
          }
      return false;
  

  Oddly enough, I wrote this yesterday for an extension WebWorks

  Here's the skeleton code

      netstatus_interface_details_t *details;
  
      if(BPS_SUCCESS == netstatus_get_interface_details(NULL, &details)) {
          netstatus_ip_status_t nstatus = netstatus_interface_get_ip_status(details);
          netstatus_interface_type_t ntype = netstatus_interface_get_type(details);
          bool nisconnected = netstatus_interface_is_connected(details);
          bool nisup = netstatus_interface_is_up(details);
          const char* nname = netstatus_interface_get_name(details);
  
          int nipcnt = netstatus_interface_get_num_ip_addresses(details);
  
          for(int i=0; i
  I wrote cela for retooling as an extension that it collects all data simply and then throw it all away (I just saw in the debugger)
  Specifically, you need store IP addresses nipaddr gets in the loop, if nothing else
  A few above who are important pieces of info
  nisup - if the network device is active
  nisconnected - is it connected to a network
  nType - if you get a result WIFI (search netstatus_interface_type_t in dox for any possible return) you WiFi
  nStatus - connection info (look to the top of netstatus_ip_status_t for more details)
  There are three possible results
  The first runs aground (no network at all)
  The network ntype is not WIFI (also bad)
  The INVESTIGATION period gets collected and you can use it
  Note that you will have at least two survey periods while yu needs to work which is ipv4 and ipv6
  Personally I'll just regex them
  ^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$
  
  The above is easy to do in JavaScript and identifies an ip4
  Oh - ipv6 that comes up is the linux full log xxxx:xxxx:xxxx:xxxx % dev
  You can do a sanity check on the ssid but I ain't got that far yet (I don't need it)
  		   

• URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  bbmChatDB of public database;

  public static FileConnection fconnRead = null;
  public static String fileReadData = "";
  public static InputStream is = null;
  data Byte [] = null;
  DataInputStream is = null;

  Here is my code...

  I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  try {}

  FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

  If (fc.exists ()) {}

  Enumeration e = fc.list ();

  While (e.hasMoreElements ()) {}

  System.out.println ("files are:" + (String) e.nextElement ());

  play this file
  StringBuffer stringBuff = new StringBuffer();
  try {}
  System.out.println ("opening file")-;
  System.out.println ("file name is:" + (String) e.nextElement ());
  fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
  System.out.println ("data length")-;
  If (fconnRead.exists ()) {}
  is = fconnRead.openDataInputStream ();
  data = IOUtilities.streamToBytes (is);
  Ddd = new String string (data);
  fileReadData = ddd.toString ();
  System.out.println ("length of data:" + fileReadData.length ());
  System.out.println ("read data :" + fileReadData);

  }

  } catch (IOException ee) {}
  ee.printStackTrace ();
  System.out.println ("Exception in the read data :")
  + ee.getMessage ());
  }

  }
  }

  } catch (IOException e) {}

  e.printStackTrace ();
  }

  {Finally

  try {}
  If (is! = null) {}
  is. Close();
  }
  System.out.println ("is closed...");
  } catch (IOException e1) {}

  E1. PrintStackTrace();
  }

  If (fconnRead! = null) {}
  try {}
  fconnRead.close ();
  } catch (Exception e) {}
  System.out.println (try ());
  }

  }

  }

  You can recode this treatment so that it uses only:

  e.nextElement ())

  Once a loop iteration.

  Directly at the start saying something like:

  String fileName = e.nextElement ());

  and use fileName everywhere in your loop.

  Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable.  So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

  {} catch (Throwable t)

  t.printStackTrace ();

  System.out.println ("Eception exception:" + t.toString ());

  }

  I think your code is thrown an exception and you don't see it.

• How to get address Virtual Machine MAC on which vmware tools is not installed

  Hello

  I'm putting the MAC address of a virtual machine in a string. At first, I was using this script:

  strMACAddress = objVM.guest.net [0] .macAddress;

  But as indicated in the title, the vmware tools are not installed on the virtual machine. I found a similar position in vSphere Web Services SDK:

  http://communities.VMware.com/thread/254204

  In this post, it is specified to use the script VcVirtualEthernetCard() object. I'm new to Orchestrator and I do not understand how to make a "myVcVirtualEthernetCard" link to my virtual computer object 'objVM '.

  Example:

  IN: objVM (VcVirtualMachine)

  OUT: macAddress

  var myVcVirtualEthernetCard = new VcVirtualEthernetCard();

  macAddress var = myVcVirtualEthernetCard.macAddress;

  Thank you for your help.

  Kind regards

  Fred

  Hello!

  You can browse the table config.hardware.device of the virtual machine:

  IN: vm (Vc:VirtualMachine)

  DEPARTURES: Macaddresses (Array/string)

  //initialize macAddresses array (to make a push() possible later)
  macAddresses = new Array();
  var deviceArray = vm.config.hardware.device;
  if (!deviceArray) throw "Error getting hardware config array of VM";
      System.debug("deviceArray: " + deviceArray);
  //loop through array, find NICs and retrieve there MACs
  for (var i in deviceArray) {
      var currentDevice = deviceArray.pop();
      if (currentDevice) {
          System.debug("currentDevice: " + currentDevice);
          if (currentDevice instanceof VcVirtualE1000 ||
              currentDevice instanceof VcVirtualPCNet32 ||
              currentDevice instanceof VcVirtualVmxnet ||
              currentDevice instanceof VcVirtualVmxnet2 ||
              currentDevice instanceof VcVirtualVmxnet) {
                  System.debug("found network card on " + currentDevice);
                  macAddresses.push(currentDevice.macAddress) ;
          }
      }
  }
  

  Please let me know if it works for you, or if you need more information :-)

  Kind regards

  Joerg

• Laptop HP 15-g075nr: can not get the Qualcomm WIFI driver to install

  I went to the HP site, had the site determine my type of laptop, then downloaded the Qualcomm Atheros QCA9000 driver and installed.  After installation, Device Manager still listed under OTHER and when I say update the network device driver, it says that it cannot find a driver for the device.

  How can I get a device driver that I can use to get WiFi running?

  P.S. I have installed hundreds of device drivers, so I know not how, it is just the fact that one on your web site does not work with my laptop.

  P.S.S. The wifi computers worked with windows 8, but I reinstalled windows 7, 64 bit.

  Hello:

  That's why the Atheros driver does not work, and the parts list said even your model with the Atheros card, that's why I there no question.  In addition, also, I assume that you checked the model of wireless card that your laptop when running on W8.1.

  Here are links to the drivers you need...

  Wireless: the RTL8188EE wireless card does not come with bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_141169_1 & swEnvOid = 4058

  Card reader:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7241980 & sw_lang =

• Get address BT paired device

  Hi all

  I would like to get the address of BT of the device (client), that is currently connected to my applet on phone BlackBerry (server). Is it possible to get it?

  I'm using JDE 4.3.0.

  I register server SPP.

  Open a port for listening to incoming connections.
  _port = new BluetoothSerialPort ("My PSP connection", BluetoothSerialPort.BAUD_115200, BluetoothSerialPort.DATA_FORMAT_PARITY_NONE |) BluetoothSerialPort.DATA_FORMAT_STOP_BITS_1 | BluetoothSerialPort.DATA_FORMAT_DATA_BITS_8, BluetoothSerialPort.FLOW_CONTROL_NONE, 1024, 1024, this);
  _deviceName = 'unknown ';

  I have the BT from the PC connection to the registered port 'my PSP connection '.

  So I'm trying to get the address of BT in this way:

  Info [] BluetoothSerialPortInfo = _port.getSerialPortInfo ();
  System.out.println ("Connected to device" + info [0] .getDeviceName () + info [0] .getDeviceAddress ());

  When I want to print the result I ArrayIndexOutBoundsException

  On a pop-up debug I can see correct _port._remoteAddress of the customer of BT, but I don't know how to get access to this method.

  Everyone has expiernce in this case?

  Thanks in advance

  Chris

  With the help of DiscoveryAgent.retrieveDevices (), retrieve all devices being cached, you can then call RemoteDevice.getBluetoothAddress ().  This can be done as part of any application.

• How to get address email used by the phone

  Hi guys.

  Can I do an API that would take the email address used by the BB Phone
  You know Wizard Installation BB configuration of e-mail.
  I try to get the email address for this configuration.

  Is this possible?
  If so, please share your knowledge.

  Thank you.

  Download the full book, get the servicerecords, get the serviceconfiguration for each record and check if it has a mailaddress (getEmailAddress())
  the first is the address of the device is registered to.

• Get the available WiFi

  I am able to set up an example of code that returns all the available wifi using the:

  http://supportforums.BlackBerry.com/T5/Java-development/scanning-WiFi-network-in-app/TD-p/1676063

  But according to the guidelines of the API (http://www.blackberry.com/developers/docs/7.1.0api/ (class HotspotClientRegistry)), two things I noticed:

  1 user Interaction is needed so that we can install the hotspot client

  2. only unsecured WiFI networks will be returned as a result.

  Issues related to the:

  1. How can I avoid the intervention of the user?

  2. How can return us all networks wifi (included guarantees as well)

  I'm not aware of any other API or workaround to get what you want.  The answers to your questions, as I know, are:

  (1) NO.

  (2) you can't.

  This question, or a very similar has been asked before and the answer's always been Blackberry do not provide a way to connect to any network without the participation of users.  BlackBerry, I think that this is a security feature.  Search the Forum if you want more.

  Sorry I can't be more helpful.

• Computers with static IP address, get addresses (169.254) APIPA

  There are several posts on my network configured with static IP addresses. To go to sleep or restart (warm), they will get an APIPA 169.254.x.x. address I found that there are three ways to solve this case temporarily:

  1. Shut the computer down (cold) and back on the power.
  2. Disable and re-enable the adapter.
  3. Disconnect and reconnect the network cable.

  I had some success with affecting the NETWORK 100 Mbit/s/Full Duplex card AND the port of the switch to match. This seems like a solution of cloogy. Updated the drivers of the card toward the newer versions does not help. The problem exists on many brands adapter, including Intel, Broadcom and Marvell. Nothing useful is in the event logs. Our switching infrastructure is Cisco all if it matters.

  Can anyone help?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Problem getting address information (Street, city, State, etc.). With the help of RevereGeocode

  I have the following code.  Get the values of latitude and longitude very well.  Can't seem to get to the street, city, State, zip code, country or countries to return code information.  all appear as "null".

  Any help would be greatly appreciated. Thank you

  ------------------------------------------------------------

  ' Public Sub locationUpdated (LocationProvider provider, a place)
  {
  If (location.isValid ())
  {
  Latitude = location.getQualifiedCoordinates () .getLatitude ();
  Longitude = location.getQualifiedCoordinates () .getLongitude ();
  altitude = location.getQualifiedCoordinates () .getAltitude ();
  Speed = location.getSpeed ();
  Try
  {
  int lv_lat_addr = (int)(latitude * 100000);
  int lv_long_addr = (int)(longitude * 100000);
  AddressInfo addrInfo = null;
  Landmark [] results = Locator.reverseGeocode (lv_lat_addr, lv_long_addr, Locator.ADDRESS);

  If (results! = null & results.length > 0)
  {
  addrInfo = results [0] .getAddressInfo ();
  Street = addrInfo.getField (AddressInfo.STREET);
  City = addrInfo.getField (AddressInfo.CITY);
  State = addrInfo.getField (AddressInfo.STATE);
  Zip_code = addrInfo.getField (AddressInfo.POSTAL_CODE);
  country = addrInfo.getField (AddressInfo.COUNTRY);
  country_code = addrInfo.getField (AddressInfo.COUNTRY_CODE);
  }
  }
  catch (lex LocatorException)
  { }
  }
  }

  Code work very well.  It seems that it takes just a little more time to get information address it does the real lat and long.  Discovered this by accident when I'm distracted talking to a neighbor and did not test immediately after that I started by app.

• BlackBerry smartphones can not get on Internet WiFi

  I have a Blackberry 8529. Provider is Vodafone. I always had problems with access to the internet (it is very slow and often says that the page is too large). However, I have broadband at home and thought, that I was connected to it--but apparently not. I tried to access our broadband from BT, but tells me to enter a PIN code (generated by my BB) in to the router to wide band. There is no way to do this (no keyboard, etc.). All I want to do is to connect to my Wifi, and it's really frustrating because it seems simply not work. I tried to do it manually (put in the name of the router, then the password), but he said that I could not connect that way or the other. Anyone have any ideas? Please? and please and please? I just want to work! Thanks in advance for any help or advice, you are able to offer.

  When you get to the point of him asking for the PIN to enter the router, press the key precedent and if I remember correctly you will give the WEP option or other WiFi, and you enter the router password (security key).

  IF you enter the PIN code in the router, it's done via your PC interface to the router.

• When you try to print to get address of 0x9ab41f function message caused a protection fault. (code 0xc0000005 exception)

  Original title: address of the 0x9ab41f function caused a protection fault.

  When I try to select preferences for my Canon MG6150 when you print a word document, the screen freezes after posting a panel with:

  Address of the 0x9ab41f function caused a protection fault. (code 0xc0000005 exception). The application property sheet pages may not work properly.

  I have to reboot to unlock the computer.

  Tried reloading the software canon and windows 7, but still no joy have the same failure anyone can help me fix this please?

  Hello

   

  Welcome to the Microsoft community!

  When you try to print a word document, you get the message as the address of the function 0x9ab41f caused a protection fault. (code 0xc0000005 exception). The application property sheet pages may not work properly.

  To help you better, we need more information.

  Is the issue limited to word document or it occurs with other documents as well?

  To work with the question, I would say that you are running the printer troubleshooter.

  Visit the site:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

  You can also consult the site:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Get address Local SCSI virtual disk (Bus: Target)

  Hi all

  I'm having a little trouble getting this info from a couple of virtual machines. I need the bus address: local target for all virtual disks VMDK or RDM. I have seen a few examples to compare the widonws configuration to the configuration of the virtual machine but I am not interested right now, I just need the configuration of the virtual machine. I would appreciate your help. Thank you...

  Try something like this

  Get - VM | Get-hard drive |

  Select @{N = "Name VM"; E={$_. Parent.Name}},

  @{N = 'HD name'; E={$_. Name}},

  @{N = "SCSIid"; E = {$strControllerKey = $_.} ExtensionData.ControllerKey.ToString (); "{0}" ': {1} "$strControllerKey [$strControllerKey.Length f - 1], $_." ExtensionData.Unitnumber}}

• Old PC died (fried motherboard). New installation of Thunderbird on new WIN 7 PC. Failed to get address of dead PC old books in the new PC. Can access the old HD.

  I copied the files abook.mab and history.mab from the old hard drive with no problems and they are functional.

  But my other address file is a different story.

  I read there are utilities that can convert this file into an LDIF file that can then be imported into TB, but I can't find a usable version of these utilities.

  What to do with the xpi files: http://xenos-email-notes.simplesite.com/416814616

  Correct link for Thunderbird profiles: https://support.mozilla.org/en-US/kb/profiles-tb

  My bad for providing a link to Firefox. I'm sorry.

• Static IP address of WiFi requires the DNS server

  I was able to confirm this on two separate MacBook Pro (various models) the two Yosemite running 10.11.4.

  After assigning a static IP address to the wireless network interface, the MacBook ping to a address beyond the gateway by default unless there is also a DNS server on the wireless interface. I wouldn't need a public IP address ping DNS server.

  For example:

  This method works.

  

  But it does not work:

  

  

  At least I have change the DNS like this:

  

  Then it starts working again.

  I tried to initiate a capture of packets and the MacBook is not even send ping on the wireless interface requests unless there is a static DNS server assigned.

  Can anyone other confirm/deny this behavior for me?

  Thank you

  Rob

  What exactly are you trying to do?

  You try to assign a Mac with a LAN IP address? If so, do it in the router by selecting an IP address on the local network to use with the Mac Machine (MAC address). This assumes that your router is your DHCP server. Otherwise, you need a DNS server that is running on your local network to be able to distribute IP of DHCP addresses.