loops for each: the type of the variable

Similar Questions

• Create a table in a loop 'for' (reset the number of loops)

  Hello

  I try to incorporate a signal of acceleration from an analog input CRIO to get speed and then further integrate to get the moving of a vibration system.

  I understand that to achieve integration, a table must be fed in. My problem is that I could not buffer the signal in a buffer block, as I couldn't find buffer blocks. so I decided to create my data table by using a loop "for". The nests of the loop 'for' inside a timed loop. The problem that I'm stuck on is how to reset the loop 'for' in order to fill the buffer with each iteration of the outer loop timed.

  I enclose the code if that helps. Note that I use labview in 2013.

  If anyone who has encountered a similar problem before can help me, I would be gratefull.

  Concerning

  Ali

  You can use a shift register initialized as inputs to your curls, to build your table of one. However, you realize, don't you, that the execution of your program as written loops as soon as the computer can spit out responses, then the output array may contain several points that took place before the entry has updated? Assuming that your thing cRIO (I've not worked with these) has integrated into its routine acquisition of calendar data, I suggest you put that inside the loop to get a data point by reading.

  And do you really want your graph to distance for update only every thousand points (points of acceleration million) speed?

  Cameron

• To loop through all the variables on an image

  Hello. I am trying to write a method to save the State of the game that I do. I am able to loop through all the clips and get their existing frameworks, but is it possible to loop through all the variables on the current frame (without knowing their names) and put them in a table?
  
  Thanks 4 any help
  
  trigger2160

  Thanks for the help. A container object is just what I wanted, even though I knew not u can do. my variables are not accessible directly so I managed to change the way they were stored easily without negative effects for the rest of the game. Now I can also save and load the State of the game which entered 4 will facilitate 4 me to test.

  trigger2160

• Cannot use Select inside the loop For inside the SCTL (FPGA) - Bug? An alternative?

  When I put a Select statement inside a loop in a loop of Timed Cycle in LabVIEW FPGA, I get the following error when I try to compile:

  "An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

  Error-61003 occurred at

  Possible reasons:

  LabVIEW FPGA: you cannot include this function in a loop For when the loop is within a single cycle timed loop. »

  I didn't know that whatever it is documented that says that this is not allowed; is this a bug or am I missing some documents?

  The code that causes this error looks like this, inside a SCTL (ignore Boolean wire wandering behind the loop for)

  

  I came up with the code below instead, which compiles into one Cycle timed loop, but it is a bit ugly. Does anyone have a better suggestion?

  

  This issue is currently followed under the CAR # 592391. Please keep an eye on our patches and new versions as usual!

• Table row with loop for each group to set the variable.

  HI: There is probably a simple answer for this, but I don't the have not found...
  
  I have a single row table to move through a group to set a variable containing a sum running. I'm not display the amount in the table but when I saw the report, I see that the table is expanding (add lines) for each loop.
  
  The only line table has 3 columns.
  
  1st column
  <? for-each: AC_GROUP? >
  
  2nd column
  <? xdoxslt:set_variable ($_XDOCTX, 'xAmtVar', xdoxslt:get_variable($_XDOCTX,'xAmtVar') + CURRENT_AMOUNT)? >
  
  3rd column
  <? end foreach? >
  
  Can I use <? for each group? > or something else. My requirement is to set the value of the variable with the total running, but because the loop is adding lines for each value he travels (though not displayed), it's also affecting other areas of the presentation of the page.
  
  Hope it makes sense. Thanks in advance.

  You can do it many ways.

  No need to loop
  You can create a variable and specify the amount of the sum directly to that.

  or

  loop through, then add as you do.

  give any space or enter characters in a word between them, just put it in a single form field will be

  But as I said, I'd definitely go with the first option.

• How can I clear the shift registers of sub for loop for each iteration of a larger loop?

  Hello

  I write a program to concatenate multiple text files.  However, I need to treat each column individually before they are concatenated.  I use one for a loop at normalze 6 columns choice the largest loop of concatenation.  However, the shift registers store data from previous iterations of the larger loop.  How can I clear the shift registers of the void loop based on the iteration of the larger loop?

  Thanks in advance!

  OK, that's fine. are there headers?

  In all cases, all you need to do is to place all of the 2D array in the shift register of the inner loop, iterate over the columns relevant to be normaized (use 'index array' to get the column it normalize, put it to help to "replace the subset of table".) You probably want to initialize the outer loop shift register. Use then "building the table" added to the beginning or the data of each file sets.

• Loop for maintains the syntax error

  for (var i = 1; i < 8; i++)
  {
      for (var n = 1; n < 8; n++)
      {
          var f = getField ("OT0" + i + "0" + n);
          f.setAction("Format", "AFNumber_Format\(0, 1, 0, 0, \"\", false\);");
          f.setAction("Keystroke", "AFNumber_Keystroke\(0, 1, 0, 0, \"\", false\);");
      }
  }
  

  The code above annoys me

  SyntaxError: syntax error
  1:Console:Exec
  undefined
  

  Even a vacuum of the loop for below ends in the same error.

  for (var i = 1; i < 8; i++)
  {
  }
  

  What is the problem?

  You select all of the code when you run?

  Wednesday, August 20, 2014, at 16:34, all rights released

• Write to the file of measurement with a loop For using the value of the dynamic data attributes

  I looked and looked, but couldn't find a solution for this.

  I currently have 15 points of different data that I try to write in an Excel file.  I have all combined in a table and lie with the function "write into a file position.  However, the column names are always "Untitled", "Untitled 1" etc.  I then used the function 'Set the Dynamic Data attributes'; but for this I have to do 15 different functions "set data dynamic attributes.  It was suggested to use a loop with the function 'Set the Dynamic Data attributes' inside of her, but I can't find how do.

  I have several arrays consisting of 15 different values for 'Signal Index' 'Name of Signal' and 'Unit', but also a unique 'get Date/Time In Seconds' related to 'Timestamp '.  The problem is that the error I get when I try to connect the output with Scripture at the entrance to measure file:

  The source type is dynamic data table 1 d.  The type of sink is Dynamic Data.

  How can I fix it?  I have attached a picture of my installation; Sorry if this is gross (I'm new on this!).  Thank you!

  It will get rid of the error, but it is not quite correct. What you need to do after that is to click on the output or the tunnel entry and select 'replace with the shift register. In addition, the array of values that you have wired to the Signal Index is wrong. Arrays are 0 based. Just wire the iteration Terminal here. And, finally, take the size of the table and this connection to the N terminal are stupid. Don't wire nothing to this.

• Loop for stop the iteration to the first page

  I have a loop to apply a paragraph style, but it stops the iteration to the first page of the document.

  I need to apply the style to all of the document... can not understand why it does not work.

  Here is my script:

  myDocument var = app.activeDocument;

  var myParagraphStyle = myDocument.paragraphStyles.item ("paragraph Style");

  myDocument.pages.item (0).textFrames.item (0).paragraphs.item (0) .appliedParagraphStyle = myParagraphStyle;
  paragraphs var = myDocument.pages.item (0).textFrames.item (0) .paragraphs

  for (i = 0; i < paragraphs.length; i ++)
  {
  var point = paragraphs.item (i)
  
  paragraph.applyParagraphStyle (myParagraphStyle, true);
  }

  Thank you

  Thanks, I've cleaned up the script, but it always stops after the first page.

  Yes, because you talk to paragraphs in a (first) special textFrame and not to the story.

  You must change your third line or replace it with that:

  var  myParagraphs = myDocument.pages.item(0).textFrames.item(0).parentStory.paragraphs;
  

• Position of the loop For

  Hello

  I have auto indexed loop For (see attachment .vi).

  I would like to show the position of the loop For on the front panel. At the moment the position appears only at the end of each iteration of a loop. I would like to show the iteration of the loop (ie 1-6) at the beginning of each loop. How to do this please?

  Nevica

  Click right int-cable in a loop and create indicator.

  /Y

• Table of path error 1430 in the loop for

  Hello!

  I have a problem with the 1430 error: path is empty or relative, which seems impossible. The thing is that I have a battery of indicators of path connected to the loop for (check the .jpg and there is no problem with writing to a file by using the paths of an array with the first and last index.) Others are not saved because of the error... to be honest, that all data paths are absolute. Record in the file of the idicator path is the work of a Subvi (merge data vi) but it is in a for loop because I need to make it available to multiple files. There is no error that occur with the work of Subvi to a path. The question is: what labview makes with the paths saved in a table between the loops? I have just run out of ideas so if someone had some time, I would really appreciate for all the tips and ideas.

  K.

  Hello again,

  If someone was interested in the happy ending: the solution is: 2 loops for. I think there must be something with the way that labview sends data between iterations. In any case - don't know how much exactly but works

  the floor is .jpg.

• increment the variable names - how can I do? Google Maps API

  I am trying to integrate google maps into my website. I want the user to be able to view the current customers of my company.

  Can I query my database and get name, longitude and latitude of the customer.

  I can do only one marker on the map like this:

  var marker = new GMarker (new GLatLng (< cfoutput > #geoip.testilat # < /cfoutput >, < cfoutput > #geoip.testilong # < /cfoutput >));
  GEvent.addListener (marker, "click", function() {}
  var html = ' < div style = "width: 210px;" padding-right: 10px "> < cfoutput > #geoip.schoolName # < / cfoutput > < br > < cfoutput > #geoip.text # < / cfoutput > < \/div > ';"
  marker.openInfoWindowHtml (html);
  
  });

  map.addOverlay (marker);
  
  GEvent.trigger (marker, "click");

  But I need to browse the database and create a marker for each line with a different variable for each name, IE. marker, marker1, etc...

  I know that I have to build some kind of loop, but I don't know how. Can someone point me in the right direction?

  Thank you

  currentRow is created by the closure of over a Recordset created by a

  I imagine that in your code example geoip was a record set from a query.  If this isn't the case, you can use any variable for which is convenient for your logic.

• Load the variable text...

  OK, given that I can't understand the things of 'submit button' in my other thread (thanks for all your comments, by the way), is there anyway that a text variable named "var1", located inside a clip called 'film', can read and then fill itself based on a variable of different text named "var2"?

  The clip ("movie") is located on the main stage/timeline with the variable ('var2'). If 'var2' has a value of 10 in, for example, the variable ('var1') within the clip itself can fill with the value 'var2' (10 in this example).

  Possible?

  If your code is on the main timeline:

  Movie.var1 = var2;

• How can I autoindex looping for to create several channels daqmx

  I'm trying to autoindex create a loop FOR containing the DAQmx vi to create AI multi-channel voltage with identical settings, except that I need to apply specific channel names using a constant and specific physical channels using a constant of channel. Wiring of a constant DAQmx of physical channel does not work because the data type is incorrect. Similarly, I don't understand how to use a string constant to autoindex through the channel names is or how to configure the constant string (s) to assign names. Also, when I try to make one of these, I get a tunnel to exit the DAQmx autoindex create channel, rather than a task out. I can achieve my goal using several explicit DAQmx create calls to channel, but for high channel count, it is very time consuming.

  I use LV 8.5.

  I'm hoping to find the code showing how to perform the conversion type, flattening, or what to do.

  Diane has.

  I have an array of clusters.  Each element of this array is a cluster.  The cluster consists of a (scalar) string and input/output (also scalar).

  In addition, my TI attachment extracted.  I think that your file has been LV2009.  If so, you can drag the image from the browser and drop it onto a diagram.

• Help with a loop For passing parameters...

  Hello

  I am creating four cubes in Papervision using a loop for. The cube class requires, as the first parameter, a MaterialsList. I created four different MaterialLists in my code with the names materialsList1, materialsList2, materialsList3 and materialsList4. In a loop for, I'm trying to pass these variables as MaterialsList parameter. It does not work. If I use the variables themselves in the code, it works fine, so I know that my problem has something to, with how I'm data, type the dynamic name (see Actionscript below). Can someone please? Thank you!

  The Actionscript code:

  for (var i: int = 1; i < 5; i ++) {}

  
  

  var cube: Cube = new Cube like MaterialsList (("materialsList"+i), 396, 40, 494, 8, 8, 8);

  
  

  container.addChild (cube);

  
  

  Cube.x = i * 430;

  
  

  cube.rotationY = 180;

  
  

  Cube.Name = "the cube" + i;

  
  

  trace (cube. (Name)

  
  

  cube.addEventListener (InteractiveScene3DEvent.OBJECT_OVER, objectOverHandler);

  
  

  cube.addEventListener (InteractiveScene3DEvent.OBJECT_OUT, objectOutHandler);

  
  

  cube.addEventListener (InteractiveScene3DEvent.OBJECT_PRESS, objectDownHandler);

  
  

  }

  You are welcome.

  If you're still able, please mark this thread as answered.