Lorex dmc2030 webcam drivers?

I have a Lorex camera webcam of DMC2030 that I can't seem to install the right. I installed it with the CD, but each time, towards the end, she didn't save some components or the driver (Error 1904). The official windows proposed patch, stil does not work. When it is plugged in, it says that is not installed the DMC driver. I can't figure out how to get the drivers to install on the right. Tried to use the file "setup" of DMC driver on the CD. That works well, but it seems to do nothing. The camera is not always recognized.

I have a HP Elitebook with Windows 7 x 64.

Anyone know how I can get the camera/media center works? Unable to find the legitimate links online.

Hello

Thanks for posting your question on the Forums of community of Microsoft.
 
You did changes to the computer before the show?
 
Here are some ways you can follow to resolve the problem:
 
Method 1:
Open the hardware and devices Troubleshooter
 
Method 2:
Check out the link and follow the steps:
Tips for solving common driver problems
 
Method 3:
Automatically get recommended drivers and updates for your hardware
 
Method 4:
Make older programs in this version of Windows
 
Method 5:
Try to install the drivers in clean boot mode.
Reference:
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"
under more information to prepare the computer to start as usual after a repair.
 
Also, visit the website of the manufacturer of the webcam and find the driver from the site part. Then download the latest driver for the webcam program. Make sure that the driver is required for this webcam.
 
Hope this solves the problem.

Tags: Windows

Similar Questions

  • Equium L300 - cannot get Windows 7 webcam drivers

    Hello

    I just upgraded my laptop Equium L300 to windows 7.
    The problem I'm having is, I can't get the webcam drivers.
    I tried vista drivers and I get the camera wizard, then the message

    "Open Webcam driver fail. "Please restart camera or computer ' tried this and still does not work.

    Like anyone else found this and could help you please.

    see you soon
    Omegauk

    Hey Omegauk,

    Can you please tell us which version of Windows 7 (32-bit or 64-bit), you installed this Equium L300 model you have exactly?

    In your case, I'll try a different driver. Currently for Equium L300 no webcam Windows 7 driver available but for similar L300 Satellite you will already find a webcam driver. You should try this one and post your result. Maybe it will work. :)

  • Need sound and webcam drivers for Satellite A660-156

    Hi all

    my hard drive is physically damaged and replaced with a new one. All the data and setting have been copied.

    But I found that you no sound and webcam drivers are installed. I had found them and correctly installed, but still no change. See its icon with indication 'no sound', click on it to solve the problem, but no problems were discovered.

    Offered to see additional information or close the window. The Toshiba site found two audio drivers, but it does not help.

    No idea how to solve this problem?

    Thnx in advance!

    Satellite A660-156 belongs to the PSAW3E series.
    Did you find this series on the Toshiba driver page?

    This series is in the list and you can find the drivers for Win 7 64 bit it.

    You can find the Webcam driver v 1.1.1.16 for Win 7 64-bit and two different audio drivers;
    It is NVIDIA v 1.0.10.0 and the other is v Realtek 6.0.1.6069

    I think you need the first v 1.0.10.0

  • accidentally not unhooked my webcam drivers

    I accidentally not unhooked my webcam drivers

    Hello

    do a system restore or re-download the drivers for the laptop or a webcam site for manufacturers, depending on whether you have a built-in webcam or not

    try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • Genius webcam drivers para look 310 s.

    Hola Necesito UN genius webcam drivers para look 310 s, tengo windows 7 profesional x 86 operating system.

    Hello

    Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
    http://support.Microsoft.com/common/international.aspx

  • Sam P200-144: Chicony webcam drivers need reinstall after each reboot

    When I come to use the webcam built-in Messenger (on a P200-144), he noted that it is not plugged in or in use. If I run the Camera Assistant Software, by pressing one of buttons does nothing.

    To get the camera to work, I have to go to Device Manager and manually update the drivers, USB video selection as device (according to the guidelines of this FAQ: [http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=UK&from=faq_selection&CFID=WebCam& FID = TIU00000038fc]), then restart.

    However, subsequent restarts following (or it could be extended, not sure), the camera still does not work and I do the driver reinstall it again to make it work.

    Someone else has this problem, and is it drivers updated, etc that fix?

    It's very strange question. I have Satellite P200D and use more than four months with success for the most part with Skype. Since when you noticed this problem?

  • Reference Dell integrated webcam not working do not. I need webcam drivers

    previously, he wotked good.when, I recently opened Skype. "Undetected Skype no matter what webcam" this message came. Then I went to the Device Manager is not listed in my devices.total of imaging, imaging devices itself option missed.later I added it by action > add legacy hardware. now, it's showing as unknown device.

    I click on this > driver.but update selected, that is to say the driver is up to date. MY WEBCAM DOES NOT WORK. I DON'T HAVE THE DRIVER FOR IT.

    PLZ PLZ HELP ME. IAM USING THE LAPTOP DELL VOSTRO 3400 & OS IS WINDOWS 7 32-BIT

    previously, he wotked good.when, I recently opened Skype. "Undetected Skype no matter what webcam" this message came. Then I went to the Device Manager is not listed in my devices.total of imaging, imaging devices itself option missed.later I added it by action > add legacy hardware. now, it's showing as unknown device.

    I click on this > driver.but update selected, that is to say the driver is up to date. MY WEBCAM DOES NOT WORK. I DON'T HAVE THE DRIVER FOR IT.

    PLZ PLZ HELP ME. IAM USING THE LAPTOP DELL VOSTRO 3400 & OS IS WINDOWS 7 32-BIT

    It is a question of Dell.  Support and drivers for hardware devices is hardware manufacturer.

    Ry Ttheir forums.  You can also get this driver downloaded/installed:
    http://ftp.us.Dell.com/Monitors/Dell_SX2210-Monitor_Webcam%20SW%20RC1.1_%20R230103.exe

  • laptop HP 2000 w/windows 7, on-board webcam drivers

    my computer hp laptop seems to have lost the drivers for the webcam embedded

    Visit the HP website and download the driver you need.  It is the only place to get them.

    Good luck.

  • PA: Uninstalled my webcam drivers and now webcam is missing from Device Manager

    Hello

    I had trouble with my webcam I decided to uninstall the driver to try reinstalling one from scratch.

    The problem is that now my webcam is still not displayed in Device Manager, so I can't access its settings to try to update the driver.

    It was a very stupid thing to do, and now I don't know what to do...

    Thanks in advance!

    Cecilia

    Hi Cecilia,.

    Unless you have already done, the first thing I would say is just to reboot the laptop and see if Windows RE-discovered the Webcam and load a driver for it.

    If this does not work, try to run the system restore to return the machine to a point in time before that you deleted the windows driver - see Option 2 below.

    http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html#option2

    Kind regards

    DP - K

  • Latitude E5520 - finding Webcam drivers

    I'm looking for an app for my integrated webcam. My Latitude is installed with Win7 64 bit.

    After a while, I found the 'dell webcam manager' but the application doesn't say, State none found, please install compatible webcam driver.

    Now I'm looking for a driver. Can someone help me? Is the webcam Manager, right?

    Thank you very much
    Frank

    I also have the same problem on windows 7, so I tried to install Ubuntu OS along side windows and the cam works on Ubuntu. so I use Ubuntu for tha cam and windows for the other members of the staff. I know its disturbing but it's better than nothing

  • Download webcam drivers for dell inspiron n5110

    Hello

    I went through all the messages to find any download link for my dell inspiron N5110 webcam but found nothing.all links redirected to a page that shows the sequence of message.

    "The details for this driver are currently unavailable. "Please try again later".

    help with kindness,

    Yasser

    Okaaaaaay. I obviously did too. Nothing happened. I did what you told me and nothing works.

    I'm sorry, but each of your 'suggestions' are things that I did before I came on this forum.

    Please, take the time and help me solve this issue rather than the reading of a troubleshooting guide.

    Thank you.

  • HP2000-2DV51SV keyboard fn button and webcam drivers

    Hello

    Yesterday, I bought my new laptop HP2000-2D51SV with freeDos and with the help of this post, that I managed to configure my windows 7.

    But I can not find the drivers for my camera and the key "fn" function keys drivers

    Please help me find the right drivers.

    Thank you

    Hello:

    See if install these two files of software get these devices to function.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117932-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

  • RD346AA Windows 8 HP VGA webcam drivers

    I have HP RD346AA VGA webcam and I can't make it work.

    I have this camera work on a Windows 7 laptop after installing the first driver of HP.
    I can't work on Windows 8. It's a shame for Microsoft who does not have such basic H/W. I expect support for the older H/w.

    Operating system: Windows 8

    I appreciate that you try to use your webcam to stand alone in Windows 8.
  • Satellite S50-B-12R - Webcam does not work

    I bought my toshiba Satellite S50-B-12R this Saturday but the moment where I couldn't use my webcam.

    I looked everywhere for my webcam drivers, but I can't find them.
    Also when I look in my configuration window there not a webcam.

    But once my webcam was working, I was on Skype and it detected my webcam so I used it and then when I tried to use it later it has not been detected more.

    So I would like to know if there are any missing drivers or maybe the webcam is not properly connected inside the unit. And what I need to do to be able to use my webcam

    Welcome,

    Robby

    First laptop was already preloaded with Toshiba picture and all the drivers and software have been installed too.
    That's why driver extra installation isn t necessary.

    Secondly, preinstalled Win 8.1 system contains the driver for the webcam. The driver is designed by Microsoft and part of the system.

    The 8.1 win provides a webcam application that you might find on the surface of 8.1 to win.
    But before using the application, you must add the webcam access and change privacy settings.

    Charm-> Open bar (Win key + C)-> settings-> permissions enable webcam & microphone

    Now close and reopen the webcam app. You should have your camera app works fine now

  • Build - in webcam of the Satellite Pro P200 - 14 d is defective

    Hi all

    When I install the program of webcam - drivers on the website of the camera works very well.

    When I restart it no longer works. When I select Preview for photo mode or something toolbaar camera assistant, he told me that the camera is locked by another program.

    I have Vista 32 bit running on a Satellite Pro P200-14 d
    Anyone who can help me?

    Greetz, Jee

    Hello

    you try the following:
    Uninstall the driver download webcam, go in the [Chicony website | http://www.chicony.com.tw/] and download the drivers of webcam from here.

    After installing the shouldn´t you have problems.
    Just give it a try, I will cross my fingers for him. ;)

    Welcome them

Maybe you are looking for

  • Insert point to appear in firefox, how can I remove it?

    Recently, I noticed that I had an insertion point to appear anywhere that I click on the browser, ill post a picture to show what he looks like, how do I get it returned?

  • IPhone out-of-warranty 6 damaged fluid replacement/trade-in

    Hello. A store approved diagnostic Apple my iPhone 6 and due at the end of the warranty for phones damaged by liquid coverage, I was asked to "recover" my non-working phone as long as no third party store would open my unit. I was told that it costs

  • Lenovo H430 video card problem

    Hi all I searched a bit on the forum but not found an answer to the problem I encounter. Apologies if it was answered, and I just missed him... I have a H430 Office with an i3-2120. I recently bought a Quadro 600 to install in the box. When I install

  • No signal HDMI when laptop start with closed lid (Y560)

    I use an ASUS VW246H Panel as my main screen with my laptop Y560. When I start it, I get the loading Windows 7 fine on the external monitor screen but when Windows actually starts the dies of HDMI signal. Is it possible that I can do the default exte

  • The wave chart shrinks back each time when you arrive 5 minutes

    I made a graphic waveform that have 5 major minutes thick, but I noticed that whenever the table lines reached 5 minutes, it will shrink to 3 minutes and repeated the cycle. I have changed the balance here and there but could not make it work. the ti