Losing audio when I 'maintain audio pitch' on video acceleration

Similar Questions

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• I deleted from the temporary folder and now my microphone and camera do not work, the audio and the video hangs when activated

  C:\Users\John\AppData\Local\Temp and emptied, had like 20 GB of misc * in there, when I deleted it no error came, nothing has been locked. then when I didn't try to use my webcam (creative Webcam live pro v280) the audio and the video freezes as if taken in too much data to be processed during recording, and when I try to speak, it comes out as a big sound introduction text that's noise and videos recorded is accelerated as a 10 x. I bought a new webcam installed and everything went well, and exactly the same thing happened. (microsoft livecam this time) no sound. Anyone have any ideas?

  Hi Johnny,.

  Perform the System Restore to an earlier date and check if it helps.

  System restore

  System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

  Hope this information helps.

• Lost audio in a video clip when imported for Premiere pro cc 2015?

  Hello,

  I've never had a problem like this with pp...

  I have here a video which lasts 15 minutes I need to edit. The format of the mp4 video file and the acoustics are ACC (I think).

  When I import into PP, the audio is cut off after 6 minutes in the video when I see it, but when I look at the video playback in another application (vlc) audio in the video is perfect in everything - no break points or dead silence, so I know that there is nothing wrong with the video recording.

  Someone knows how to solve this problem with Premiere Pro? I tried to restart the application; no difference

  

  Whence the video clip? Judging by the name of the clip, could be the game screenshot? Lots of capture software seems to capture an image variable rate video, who does not like the first. Convert the clip via HandBrake software at a standard rate may be the answer if that's the case.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• I need help on how to audio output when I go. I ticked the box at the bottom, but when I go to view my video on quicktime, it does not play audio.

  I need help on how to audio output when I go. I ticked the box at the bottom, but when I go to view my video on quicktime, it does not play audio.

  GUYS, I GOT IT. AND THE SOLUTION IS WAYYYYY WITH JUST A RENDERING. So after countless time I spent trying to make it, I found a way that me really happy that my old rendering has not worked. All you have to do is download adobe media encoder and BAM your gold. I make it in h.264 that i couldt using the old rendering and now it works fine.

• With media player, I get audio but no video. What is the problem?

  Whether it's a wvm file or not, I get a black screen with audio only.

  Hi newbewon1

  1. you try to play a WMV file?
  2. what operating system is installed on the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  For resolution, please refer to the procedure below and identify what codec was used to compress the file. You must install the codec even on the computer to read the file. There is no absolute way to do that, but here are your best options:

  ·          To determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the Audio codec and Video codec sections.

  ·          Use a non-Microsoft codec identification tool. Many are available on the Internet.

  So you can check if the installation using the correct codec solve you the problem. You can use your favorite search engine to download and install the codec. Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  http://www.Microsoft.com/downloads/en/default.aspx

  http://support.Microsoft.com/kb/316992

  NOTE- Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• Media Player... Whenever I try to play a video, I get only audio but no video

  Whenever I try to play a video, I get only audio but no video

  Can someone help me

  Hi Pedro Gonzalez h,.

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the accurate and complete error message you get when you try to run?
  2 did you do any change to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2
  I suggest you try the steps from the following link:

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11
  http://support.Microsoft.com/kb/926373

  Hope the helps of information. If you need help, please reply. We will be happy to help you.

• Win7 system sounds don't work, audio for games video and music

  I have a HP G71 Notebook running Windows 7 with the latest
  updates.  Recently my sound system ceased to function, even
  However, I still audio for games, video, music, etc. How to make
  Solve this problem.  The computer came with a disk of Windows 7, but
  I have a correct product key, and I created a recovery disk.  Any
  the suggestions will be highly appreciated.

  The victory plan was modified default (e-mail notifications was the only thing that I changed). Nope, not
  sound would play when I tried to test it.  Follow the tutorials and none of them worked so just
  for the heck of it, I did a restore of the system from May 30 and that did the trick.  System sounds are
  work once more.  I was afraid my Windows program had got corrupted and I did not really
  want to have to reinstall everything in order to fix a problem like this.  I appreciate the prompt
  answer and I will not hesitate to turn again to you guys.  Thank you!!

• Audio plays but video does not first Pro CC 2015.4

  This occurred shortly before, but recently it happens all the time, to the point where I don't know what to do. It seems that the more I use first, problems pop up more and more difficult to use. It feels like he's slowly killing my computer or something. But here's the latest:

  When I play back the video, sometimes just having a cup/change, sometimes playing, the video appears to freeze, stops the playhead moving, and the video freezes on wherever it was before reading, however the audio will continue to play. I can click around, recurs in the audio, but no video - it stays on the frame was for the first, he froze or will just go black.

  When this happened the first time that she would usually just take place when my computer seemed to be overloaded: I was at the end of a project with a lot of changes/titles/etc, did not close the program for a while, etc. Usually I could simply close first, sometimes restart my computer, and once I opened everything, once again, would be nice. Now, I'm at the beginning of a project and he does CONSTANTLY.

  If you need more information about me or have a workaround solution and can explain things to me as if I had no idea what anyone, it would be great because I'm not for most.

  First Pro CC 2015.4

  My drivers are up to date.
  

  I have a LaCie thunderbolt device plugged in with the USB 3.0 cable.

  I have Adobe first Pro CC 2015.4

  I have a Lenovo laptop using Windows 10 (* insert barfing noise *)

  Processor: Intel Core i7-4700MQ CPU @ 2.40 GHz 2.40 GHz
  Memory (RAM) installed: 8.00 GB

  System type: 64-bit, x 54 base processor operating system

  At this point, might as well try an 'off' Nvidia too.

  And if this doesn't work, I'd certainly a uninstall/reinstall process, using the Adobe... found CC cleaning tool here:

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Using this, completely remove the Premiere Pro and then download/install a copy of application of Office CC PrPro fesh.

  See if that helps. Now the cleaning process full of destroy all preferences & saved custom workspaces... well you copy those before closing. And my mind just froze... Normally, I know exactly where to look for those within a PC, they are in the users / (you) / AppData/Roaming/Adobe... I think so? No idea where Mac stores, but you should be able to search for it.

  Neil

• First Pro exports only my audio, not the video

  I'm a beginner to this program, so please bear with me.  I'm in first Pro CC (2015.3) v 10.3, blue Fox on a PC with Windows 7 Pro. The Media Encoder is also Media Encoder CC (2015.3). When I queue to export the Audio/video file, I chose H.264 and AAC Audio.  The video and audio of boxes are ticked for export.  I have the game - high-speed selected Source and preset of Facebook.  Is the screenshot after I encoded the file, but I am able to see the process of Audio and video, while it exports the file.

  Here is the screenshot of my Premier Pro screen. I had created a couple of these slide shows before and everything worked very well.  Now for some reason, there is only Audio now.  I tried it with two series of photographs with the same results.

  Any help is appreciated and I apologize if this is a repeat problem, but I don't see anything that fits my situation specifically.

  When you are working in a new project (or new sequence) and you add the first piece of media in your timeline (sequence), if the media card to match the settings of the sequence, it will ask you "Do you want to change the sequence to match the media" and you have done this, no other way to get an image size of 4608 x 3456, which is not equal to any standard video format. Is also 4:3 and not 16:9 for the video output screen. So unfortunately, if the configuration of the sequence is bad at first, your project is built on a poor Foundation that will cause problems later when you try to export to a standard format.

  If you want to put the video on Facebook, that would be 1920 x 1080 or 1280 x 720 for instance (1080 p or 720 p). Your sequence should be created accordingly before adding any media. In Prefs or sequence by sequence, you can use the size value of the frame to have the media scale in sequence (photos/video will scale to fit the image).

  Try changing the size of the image in your sequence up to 1920 x 1080 settings. You may need to click on the pictures and also the value size of the frame.

  EDIT: also change the audio sample rate of 32000 to 48000 which is more standard and superior

  EDIT 2: If you put 4:3 pictures in a 16:9 frame, yes you get black bars on the sides. As the top and bottom of the pictures of the boat may be just the water and the sky in any case, you can change the image until it fits left to right, cropping the top and bottom which you can't miss anyway. Can also set vertically then necessary. Use the Adobe movement controls for these actions, found in the effect controls panel.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• You can link Audio to any video online of time so it works as if you imported a video with audio?

  Hello...

  I have the video and I recorded also outwardly audio to synchronize with it. Now, I understand that you can drag the video (remove audio sound if there a) then drag an audio clip in the timeline and place it under neath it. I can get it in sync and all this very well.

  The problem I have is that it is cumbersome to change like that. When you import a video with audio integrated if you make a cut, she cut the video AND the audio attached to it at once. If you do it the way I do now you must add additional discounts on the audio file as well. If you double the clicks needed to edit. Also when you are deleting clips and dragging the things about you must be very careful to make sure that the audio and video remains synchronized.

  What I hope is a way to "join" the audio to video with over the addition of a long and tedious process of rendering out to embed a video file with it.

  Solutions, I tried and failed.

  GROUP: That seams like the obvious to make thing... If I consolidate them, I can select them as one, move them as one... but if I select the cutting tool it cut more than video or audio... not both.

  SEQUENCE: The other option I've tried is once it is synchronized, I do a new sequence and add the sequence with the video and sync audo and then change on it. I'm not modify a sequence not the raw audio and video. The problem here is that, while now the cutting tool cuts both video AND audio at the same time and I can also move and edit easily... the problem is that now the dose of waveform appears not in the audio when extend you. It's just a big box of green white (even if there is no audio in the original sequence)

  Any ideas?

  Thank you

  In the timeline panel, select the audio clip and video clip. Go to the menu video > link.

  MtD

• How to add audio to a video recording.

  Hello

  I want to seduce to recognize the audio from the video when recording a video demo. I know it's possible in captivate 6.1 but don't know how to do. It seems lame, but I am a beginner.

  Hello

  Welcome to the Adobe Forums.

  You can do this by selecting the Audio System on the registration window option. Please refer to the image below:

  

  I hope this helps!

  Thank you!

• Flash 11.2.202.235 audio but no video playing in IE9

  The PC in question is under IE 9.0.8112.16421

  Windows 7 64 bit

  I installed (and reinstalled) the last flash 11.2.202.235 drive nothing works.

  I have disabled hardware acceleration

  I installed the latest drivers from the manufacturer graphics card.

  When I try to play a video on sites like youtube, the player indicates the initial frame, but then shows that the bottom (as if the player were not there at all), and plays audio only.  If I move the screen up and down (using the scroll wheel) on several occasions, the player is updated and displays an image of the video, then it goes back to the background color.

  I tested in Firefox and Chrome and the player seems to work in these browsers very well, so it's some kind of conflict with flash 11.2 and ie9

  Currently, I have three machines who are facing this problem, but this number seems to increase.  It was the week last only two.

  Do you see the same behavior both of these videos in Internet Explorer?

  Test 1

  Test 2

• Flash Player plays audio but no video

  The Flash player on my computer plays audio but no video.  The screen is blank.  If I move my mouse over the screen, sometimes, the video will be momentarily but then disappear.  This happened for months

  I tried uninstalling and reinstalling several times.  I've disabled ActiveX filtering and enabled the Flash module.

  When I go to Test Flash Site, I can see the animation of the ball moving across the screen.   And he tells me that the program is installed successfully.

  When I search the Flash program on my computer I can't find it.  Also, I can't find the AppData folder.

  I have the version 11.1.102.55

  Windows 7 / 64-bit

  THAT IS TO SAY 9

  Windows: How do I update the device driver for my graphics/video card?

  Or

  How to disable or enable hardware acceleration?

  But don't go to page find Flash Player Version but instead go to: http://www.adobe.com/software/flash/about/

  And right-click the area under Adobe Flash Player.

• Help with editing audio in a video with iMovie.

  Hey, how can I change audio in my video removing just the voice of the person talking, but keeping the substantive points? I tried all possible applications for this. Even iMovie. But its still really hard to understand. Please tell me as soon as POSSIBLE. I have a presentation soon. Thanks :)

  If I understand the person talking is on the same audio track as background music.  I'm not aware of any software Smart recognize what is voices and which is music and remove one of them.   Perhaps you could find a copy of the same or similar background music and use it instead of the current audio.

  Geoff.