Loss of control 2 files

Similar Questions

• Can feature FLASHBACK DATABASE undo the loss of control of file/ORL?

  DB version: 11.2.0.4

  Platform: Oracle Linux 6.4

  I personally have not tested the FLASHBACK DATABASE feature. I came across examples of logical errors such as truncate Table being overturned on FLASHBACK DATABASE.

  I guess that FLASHBACK DATABASE feature may undo the loss of the data files. But will be a loss of control or the Group of newspapers online file again defeated using FLASHBACK DATABASE?

  Hello

  "I guess that feature FLASHBACK DATABASE can cancel the data files loss." Do not assume, check it out

  Flashback database cannot cancel the loss of data files, control files and redo log files.

  Flashback Database limitations

  Because Flashback Database works by undoing changes to data files that exist at the present time when you run the command, it has the following limitations:

  • Flashback Database can only undo changes in an Oracle database data file. It cannot be used to fix the failings of the media, or recover the accidental deletion of data files.
  • You cannot use Flashback Database to cancel a file of data reduction operation. However, you can disconnect the wizened file, flash back, the rest of the database, and then later restore and restore the shriveled data file.
  • You cannot use Flashback Database only to retrieve a data file. If you Flash back, a database at a time when a data file exist in the database, that the entry of data file is added to the control file. You can only recover the database using RMAN to fully restore and recover the data file.
  • If the database control file is restored from backup or re-created, all the accumulated flashback journal information is ignored. You cannot use FLASHBACK DATABASE to get back to a point in time before the restoration or re-creation of a control file.
  • When you use Flashback Database with a time of target during a NOLOGGING operation was underway, corruption block is likely in database objects and files of data that is affected by the NOLOGGING operation. For example, if you perform a direct path INSERT operation in NOLOGGING mode and it runs from 09:00 to 09:15 April 3, 2005, and then use you Flashback Database to return to the target time 09:07 on this date, the objects and data files updated by the direct path INSERT have finished block operation Flashback Database corruption. If possible, avoid using Flashback Database with a time or SCN coinciding with a NOLOGGING operation. Also, perform a full or incremental backup of the immediately affected data files backup after each NOLOGGING operation to ensure recovery of points in time after the operation. If you plan to use Flashback Database to return to a point in time in the course of an operation, for example a direct path INSERT , consider performing the operation in LOGGING mode.

  See: https://docs.oracle.com/cd/E11882_01/backup.112/e10642/flashdb.htm#BRADV286

• Toshiba satellite which is stuck in the installation of service Pack 1. I have service pack 2, can not fix with this cd, can I install service Pack 2 on it without loss of data or files?

  I have the laptop (Toshiba satellite) friend who's stuck in the installation of the service Pack 1.  I have service pack 2 and am wondering, since I can't fix with this cd, can I install service Pack 2 on it without loss of data or files?

  PC claims service pack1 cd with file asms

  When you use service pack 2 cd can not load product catalogues, it is fatal error, the Setup logs files should contain more information.

  Why not integrate Service Pack 2 and Service Pack 3 on her XP CD by following the instructions here (using another PC):

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/1443.aspx
  Copy all data on an external hard drive, do a clean install using the XP CD updated (preferably on the BIOs)
  Then, install the drivers from the system, then Microsoft Security Essentials, Windows 7 Firewall Control (XP free Version) and Malwarebytes' AntiMalware (free or Pro) or whatever you prefer security.
  Then copy the files over.
  This will probably lead to the best performance.

• An error occurred while Windows was working with the Control Panel file C:\WINDOWS\system32\ALSNDMGR. CPL.

  Title:C:\Windows\System32\ALSNDMGR. Original CPL.

  Running Windows XP PRO this message "an error occurred while Windows was working with the Control Panel file.

  C:\WINDOWS\system32\ALSNDMGR.cpl.

  Can I re-enstall or the download file?

  Hello

   

   

  1. Once you get the error message?

  2. What is the card its installed on the computer? E.g. Realtek

  3. do you have a cleaning registry registry booster software installed on the computer or third party?

  4. are you able to play sounds on the computer?

  5. have you done any software or hardware changes on your computer before this problem?

   

  Alsndmgr.cpl made reference to the Manager his control panel Realtek Semiconductor AC97 file.

   

  If you have the card Realtek sound on your computer, try the following steps

   

  Method 1:

   

   

  If you have your CD of the sound card, I suggest to uninstall the card drivers sound sound card support applications and reinstall them.

  Reference:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  See also:

  http://support.Microsoft.com/kb/307895

  Method 2:

   

  You can still download the drivers from the Realtek or the sound card manufacturer's Web site.

  http://www.Realtek.com.tw/

   

   

  Hope the information is useful.

  Thank you for the help, I downloaded the 97 Realteck PGM. He cured the issue.

• ORA-00230: forbidden operation: snapshot controls unavailable file enqueue

  Hello

  Get this error for a while now.

  From control file and SPFILE Autobackup 3 November 2014 06:05:11

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03015: an error has occurred in the script stored std_arch_log_bkup

  RMAN-03009: failure of command of file control and SPFILE Autobackup on channel ORA_DISK_1 at 03/11/2014 07:08:13

  ORA-00230: forbidden operation: snapshot controls unavailable file enqueue

  Complete recovery manager.

  ------------------------------------------------------------------------------

  Recovery Manager: release 11.2.0.3.0 - Production on Mon 3 Nov 07:08:17 2014

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: EMDEV (DBID = 1134683784) connected to the recovery catalog database

  RMAN > RMAN > catalog resync;

  2 > 2 >

  waiting for snapshot control file enqueue waiting snapshot control file enqueue waiting snapshot control file enqueue waiting snapshot control file enqueue waiting snapshot control file enqueue waiting snapshot control file enqueue waiting snapshot control file enqueue waiting for the snapshot control file enqueue waiting snapshot control file enqueue waiting snapshot control file enqueue waiting snapshot control file enqueue waiting for the snapshot control file enqueue can't do a snapshot control file

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03009: failure of command resync to the default channel to 03/11/2014 08:11:19

  ORA-00230: forbidden operation: snapshot controls unavailable file enqueue

  Tried to watch what may now be the queue:

  PROGRAM MODULE ACTION Logon ADDR KADDR TY ID1 ID2 LMODE SID SID ASKS CTIME BLOCK user

  141 SYS rman@hq4dr015343 (TNS V1 - V3) rman@hq4dr015343 FINISHED67 (TNS V1 - V3) 0000003 8 October 14 000000015FCD83E0 000000015FCD8438 141 0 2 4 0 2280088 FC 0

  but he said it's OVER. Any suggestions?

  I have reset:

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  TO

  CONFIGURE CONTROLFILE AUTOBACKUP

  and then once again changed it back to:

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  Test ran backups and they ran fine.

• How to use iCloud without let it control my files?

  I'm not a fan of iCloud or machinery interfering with my activities.

  I had hoped to share my calendar with another computer in my home. During the implementation of the share through the cloud, I discovered that I have disabled my contacts in the list of things to share iCloud, the result would be that my laptop would lose all contact information.

  Just my experimentation with the cloud, put in place, I lost control of my machine.

  Now, if I cancel all my laptop upward has no contact info.

  Apple seems to think that I want to keep my connection with the cloud living and still active. I don't.

  Allowing the iCloud list to stay disabled restored my contacts. Unplug the ethernet cable, I found that Yes, I always had my contacts in my computer.

  Now, they are also in the iCloud? Can they be dumped there?

  I hate the presumption by apple that I want to store my contacts (and other files) in the cloud when all I had hoped to do was sync/share a calendar... and only the calendar.

  Not only is my placed information in the cloud, but also the information on the computer I wanted to share with took in the lands of apple.

  The owner of the other computer is not happy to now be obliged to keep the cloud full of personal documents and active. This owner also wants to clear the cloud of personal records.

  Is this possible?

  Are there manuals that describe the process?

  I would say iCloud is not the tool for you.

  That said, any other "sync" calendar type service works pretty much the same. 2 computers do not speak with each other directly. They use a server as a synchronization point. A 'cloud' is part of the synchronization process.

  What you want is a shared calendar that does not use a cloud server based to synchronize.

• control/references file closed and re-used

  See attached example.  I realized that you can reuse a reference control, even after it is closed, and it is not applied to the file reference.  Why is this?

  Only the need of refs dynamice closed, see here.

  Ben

• path of the file control: invoke file browser activation

  Hello

  on the façade of a vi, I want a file path control automatically opens the file browser window when the user clicks in the control of trajectory. Is it possible to do it programmatically after the mouse down event has been triggered? I couldn't find a method appropriate to date.

  Thanks for any advice,

  Peter

  Hi Peter,.

  Yes, it is possible that you have described. Have you tried it? ;-)

  Mike

• REMOVE UNNECESSARY CONTROL PANEL FILES

  It there a few time I installed some software but due to some problems, I uninstalled the thses are always present in the list of program control panel installed. How can I remove them. Can I check my system all the unwanted files and can I delete them from my PC? Day after day the performance of my PC becomes bad and low.
  I did it as a result of the actions so far:
  1-DISK CLEANUP
  2-DEFRAGMENTATION
  3 - VERIFIED UPDATES

  Something more about updates is that all updates load my system or replace the old files?

  -Install Revo Uninstaller - free

  You may need to reinstall the bad programs then let Revo uninstall them. Attention to the registry options only remove the LOWER KEYS displays, ususually highlighted. Use the max level during installation to get everything.

  Try using this 1 without having to reinstall the errant programs.

  Revo - free
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  You could also tell us the names of errant program if you would like more information.
  Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• Black display and loss of control after Vista updates

  Dark display died and the loss of no control, i.e. no key works & cannot turn off PC, after to apply updates to windows, once trying to display an attachment to an e-mail, once trying to use a link on another Web site. Update is responsible?  Can I delete individual updates, or do I have to remove all the 52 recently applied? system seems to display again after long, long wait.  Cannot afford these expectations very, very long time.

  Hello

  Here's something that I put in place when the posters have problems with Windows updates.

  They must be both to find the problem, we tried.

  But it takes a material one, graphics, etc. to limit.

  You do not have to install an update problem will continue to cause problems for you.

  Is there a way to get around that.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Can I partition my C: drive without data loss and transfer user files to the new?

  I have a pre-installed windows 7 Home Premium(64-bit) on a computer laptop DELL studio. Unfortunately, it only has drive C and no partition at all. Therefore, it is possible to create partitions without risk of loss of data (System and user)? If so, is it possible to transfer all the files from the user to the new one system files and all stay in C.

  Rodney

  Partitioning itself has no impact on performance. You can get slightly better performance by how you distribute folders and files on a partitioned system but I would not partition to eliminate program freezes. It's the wrong way to tackle the problem.

  There are many reasons for freezes.

  Freezes occur mainly because the task or tasks require more memory or one that is immediately available to the capacity of the CPU. The solution is to increase what is available or to reduce demand. You can do both. How to do this is much more complicated. It depends on what element of hardware is causing the bottleneck. If memory is limited, it can be simply remedied by adding RAM. If the problem is the capacity of the CPU, you will find that increasing capacity is often not practical to replace the often average CPU processor replaced motherboard, operating system and other equipment doing expensive exercise... Change the hard drive could help, but switching to an SSD is also expensive. If the processor is the problem, then demand reduction is often the way to go.

  If you are resolved to reduce the demand, it can significantly improve the performance if you delete the browser add ons such as toolbars and search engines that are not necessary. Most of the time when you install the new software you will find recommended add ons. You must learn to say no when they duplicate what you already have. Add on can hide malware, including spyware, reports how you use your computer. Do not believe the bland statements like 'works quietly in the background. It's more than one spin. Multitasking may be good, but it can provide performance problems. It translates into a surplus of supply over demand.

  Another cause of gel can be for lack of material, most commonly, the hard drive, RAM wiring associates or defective. These flaws are often easy to detect, but not always the case. You must also make sure that you have the latest version of the BIOS and motherboard drivers. They can be updated on a brand new computer if the person selling you the computer is not updated immediately before restore you the computer.

  If Frost always involves the same programs uninstall and reinstall the program, and you make sure you have the latest updates. You can also use Google to find out if others have or have had the same problem. Focus your search by using keywords, descriptions of the extracts may event viewer and limit the results to those within 12 months.  Many programs have dedicated forums where other users may be able to help.

  A gel is often the result of a malware infestation. In this case do not rely on your existing software. You need to perform analyses with software like Malwarebytes and Superantispyware. Perverse freezes may be caused by security software. Norton and McAfee are known to be involved, in particular where the computer has limited the capacity of RAM and CPU.

  Poor or no maintenance will result in poor performance. You must have a maintenance routine. This can include compaction (some e-mail programs) and should include the cleanup with cCleaner and disk cleanup and defragmentation. You must make sure that the partitions have at least 20% of disk space. You do not defragment SSDS.

  You must use the tools on your computer to look for clues as to what is happening. More you use, the more you understand what they say. The most useful tool is event viewer, although many users, it is difficult to interpret.

  You will find many sites on the internet promoting the use of registry cleaners and optimizers to maximize the performance of your computer. They are promoted by the spin and the hype. The truth is that their use causes finally grief when you use to reinstall windows to eradicate the mistakes of the system they have caused.

• Windows restarts when I select the option to remove the program from the Control Panel files

  Windows 7 Home Premium 64-bit installed. System of the down stops and restarts whenever I select the option to remove programs from the control panel. First of all, the problem occurred when I upgraded the version of iTunes. Restoration has solved the problem. Same thing happened when I upgraded my version of PowerDVD. Restored again to solve the problem. Just installed Office 2010 and the problem came back. I don't seem to be able to install software without this problem. Any help gratefully received.

  Hi Rugger,

  Welcome to the community Microsoft and thanks for posting the question.

  This issue could be happen if system files have been corrupted or any third party application conflicts.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  I suggest you perform a SFC Scan and check if it helps.

  Steps to perform a scan SFC:

  a. click Start, click principally made programs, Accessories, and open the command prompt.

  b. type the following command and press ENTER:

  sfc/scannow

  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]

  Once the scan is finished, close the command prompt window, restart the computer and check.

  Reference: http://support.microsoft.com/kb/929833

  Method 2:

  I suggest you perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Unable to connect to the bluetooth control server file not copy files

  original title; CELKON MOBILE A95 device MODEL

  Not able to connect to the Bluetooth server control File and not able to copy files from the laptop to the phone's memory card. My laptop is HP 430 and Windows 7 Ultimate edition.

  Urgently need a solution.

  You receive an error?

  Try to run Windows Update and install all updates.

  Visit the HP Web site:

  http://support.HP.com/

  And install all the drivers for your laptop, you coul also contact HP support from there.

• Loss of control of the mouse in the LR4

  I was with a brush to soften the skin, and my mouse has suddenly stopped responding.  He cannot afford to pass something other than a movement up/down.

  I changed the mouse, and I restarted the computer.  I have no additional views and no other program of work.

  I noticed that the mouse control is a problem in newer versions of LR as well, but I can find no useful solution.  Any help would be greatly appreciated.

  Try to delete your preferences file.

  Where to find Lightroom 4 preference files

  In addition, if you do a lot of brushing up on a single photo, you will find that Lightroom is slow and lag, it is a known problem with Lightroom. The solutions are to paint as the next step in the last edition, and the final stage of editing is to light the lens Corrections; get a faster processor; make brushing in Photoshop or Photoshop Elements.

• Control edge file animate OAM with the buttons play/pause of Captivate on the skin.

  Hello world

  I worked on a project where I mix a variety of objects and animations.  I do animations animate on board.  The problem I have is that when the user clicks the button pause on the Captivate playback controls, the oam file do not pause.  I found descriptions of how I can make an animation to play/pause the Captivate timeline button on board, but I can't find anything on the use of the Captivate pause button to control the Edge file animate.  Discussions only that I managed to find on that seem to be the answer.  Someone had a bit of luck with this question?

  Any advice would be appreciated.

  Thank you

  Randy

  OK, it's a bit hacky, but it works quite to control the main timeline object in a file of edge of Cape Town, where the Edge file has been imported to Cap 9 as a Web (oam) object. I went seeking answers same like you and came from vacuum, then start to tinker myself and came across the following method.

  Let's use window.postMessage to send a string between Cape document window and document edge iframe window then react accordingly. You can learn more about postMessage accepted battery answer here: http://stackoverflow.com/questions/3076414/ways-to-circumvent-the-same-origin-policy

  In your dashboard file click the support of Actions for the stage object in the timeline and select the compositionReady event. Paste this code into the text window:

  addEventListener for Chrome, attachEvent for IE

  window.addEventListener ('message', receivedFromCaptivate, false);

  window.attachEvent ('onmessage', receivedFromCaptivate);

  function receivedFromCaptivate (event) {}

  switch (event.data) {}

  case "play":

  SYM. Play();

  break;

  case "pause":

  SYM. Stop();

  break;

  }

  }

  Save the file and publish it as an oam, then import the OLS in a slide of Cap, as you normally would. Now, to put in place things of the CAP. Here is a visual aid for the rest of the explanation...

  

  In the PAC file select the control that you use to start playing the chronology of the edge (in the example above the "slide4Play"), select the checkbox 'Use as button' in the properties on the right, select the "Actions" tab, then to the drop-down list for 'Success' choose "Execute advanced Actions." Click the folder next to the selection of Script control and advanced Actions dialog box should appear. Name your action something (for example, "playEdgeSlide4"), then click the 'Add' in the grey bar to add a new action in the queue. In the drop down "Select Action"... ", choose"execute Javascript. "In the drop down menu"select the window... ". ", choose"current ". Then click on the 'Script_Window' button to bring up a window of text Javascript crap. In this window, you can paste this:

  try {}

  $("iframe") [0].contentWindow.postMessage ("play", "*");

  } catch (e) {}

  Console.log (e.message);

  }

  Select 'OK' to close the window of text Javascript crap, then click the 'Update Action' button to save your new action. Now let's do the same for break action - select the control that you use to pause, go through the steps above, the name of the action, implement advanced action in the same way and in the Javascript crap text window, paste the following text:

  try {}

  $("iframe") [0].contentWindow.postMessage ("break", "*");

  } catch (e) {}

  Console.log (e.message);

  }

  Cap incorporates the Edge file in an iframe on the page that has its own document window. In order to communicate between base ceiling windows and the iframe, we use the postMessage call. So when you hit your button Pause/Play in Cape Town, he publishes an event to the function that gets recorded in the iframe on board. And in the event.data is the string we send above the Cap base window in the function postMessage ('play' or 'pause'). We use a simple switch to react to the data string, stop or have fun with the main symbol of the scene at the edge (sym.play(1000) (), sym.stop ()).

  I hope this helps!