control/references file closed and re-used

Similar Questions

• Control reference 1055 error when you use a loop for

  Hello

  I'm having a problem using control references to accomplish the following: I a VI that reads data from a text file, and then uses that automatically update the value of a control on front panel on two live different, then set the default values, and then save them. Comes from the array of control references, I tried looping on text labels until I have find the one corresponding to the order, I want to change and then update its value. The problem I have is that if I use a loop for, then 9times of LabVIEW 10 complains error 1055: "LabVIEW: object reference is not valid. If instead I the wiring to the index table and manually extract the reference, then it works every time and for each index of the reference of the order.

  Can someone take a look at my code and just see if its obvious what the problem is? In this case, I have a simple solution, but I would really like to understand what I did wrong. I have included as a code snippet, but also attached the files if that helps (Its Import_Colormap.vi, which is the problem). Persons with disabilities code fails, the active code works but I can't see what is really the difference between them - I can change the index of array 0,1,2, 3. and no mistake.

  Thank you.

  

  Your "Colormap.ctl" is a strict type def that contains a ring.  You define the elements programmatically, make the default values, and then save the "Colormap.ctl"?   I was never practicing this but here is a thread that covers this in detail. I do not understand what you expect reach by running.
  The next thing: at the same time (at the same time!), you open the Colormap.vi (this is what we see in yout PNG) that contains an instance of the Colormap.ctl on the front panel. I'm not pretty sure if LabVIEW can handle this correctly. This could be the reason why you sometimes get the error 1105.
  I prefer StringsAndValues and eventually the value of the ring running.  There is no need to do it with a def of strict type.

• XLIFF file format and use with JAVA API

  Hello
  
  We use BEEP version 5.6.3 in Oracle Applications 11.5.10.2 and we are developing some reports to be translated into 10 different languages. We are therefore very interested in XLIFF files but have some questions about the file format and the use of the JAVA API
  
  (A) FILE FORMAT
  Accuracy: we generate the XLF file in menu add-on BEEP in Winword MS used to build the RTF model
  (A - 1), the generated XLF file begins with:
  <? XML version = "1.0" encoding = "utf - 8"? >
  Can we change encoding to "ISO-8859-1' as soon as convert us the file format?
  
  A-2) section he < header > < skl > < file > internal - contains a huge chain that seeem to be binary... What is c? can delete us it?
  
  A-3) can you have a file XLF muliple < file > sections (one for each language translation)?
  This can be very useful for us to manage a translation only by a report model file.
  
  A-4) the most important section for translation is included in the tag < trans-unit >.
  Each of them has a separate as id "49e41f8f" '... '. Can we replace that with a larger significance?
  
  (A - 5) in the format of language is as "en-US" (area code + language code).
  It is case sensitive?
  
  (* B) THE USE OF XLIFF FILES WITH JAVA APIS *.
  We use the OPE "FOProcessor" class to generate the PDF providing:
  -Data generated by SQL report XML file
  -File XSL - FO, generated from the module BEEP in MS WINWORD RTF model
  -XLIFF file generated from RTF model by the module BEEP in MS WINWORD
  -The XLIFF file contains a file entry to translate the form English to French
  < file source = target language language "en-US" = "en - US" datatype = "OPE" original = "orphan.xlf" product-version = "orphan.xlf" - name of the product ="" > "
  
  Here is a summary of our java implementation class:
  
  Processor FOProcessor = new FOProcessor();
  processor.setData (sXmlDataFilepath);
  processor.setTemplate (sXslTemplateFilepath);
  processor.setOutput (sPdfOutputFilepath);
  processor.setOutputFormat (FOProcessor.FORMAT_PDF);
  processor.setLocale ("en - US");
  xInputXlfLang = new FileInputStream (sXlfLangFilepath);
  processor.setXLIFF (xInputXlfLang);
  try {}
  Processor.Generate ();
  }
  {} catch (XDOException e)
  e.printStackTrace ();
  }
  
  
  (variables beginning with "s" are path + names passed as arguments)
  
  
  The output PDF file is well generated, but not translated in French!
  
  (1) I missed something?
  What is wrong in my code or my XLIFF file?
  Y at - it a parameter to pass to allow the XLIFF translation (via setConfig)?
  With "setLocale" we indicate the target language, but how BEEP knows this current language is "en-US"?
  
  I found a few posts on the subject, but none with a clear solution. So if I managed to solve this problem, I think it can be very useful for many developers.
  
  Thanks in advance for your help.
  K.Helali
  
  Edited by: K.Helali Apr 26. 2010 01:56

  Hey,.

  I know what you're talking about.

  Do not make the rtf-> xsl in the office.

  Do it in java code.

  Use RTFprocessor, for her, just set the model and set the true extractxliff.

  move the xsl foprocessor.

  to do this

  (1) in the BEEP for MS Word
  1 - a) build the RTF model
  1-c) extract texts translateable to the XLF file

  (2) in BEEP Server (Linux Redhat, BEEP 5.6.3) included with the Oracle Applications 11.5.102
  (2 - a) write a java class that implements class FOProcessor (see code in my first post)
  I'm passing to the FOProcessor class
  -XML data file
  model model XSL - export RTF, file to the XSL using RTFprocessor file save it sub - (here in rtfprocessor.setextractXlifff - true)
  http://download.Oracle.com/docs/CD/E10415_01/doc/bi.1013/e12693/Oracle/Apps/XDO/template/RTFProcessor.html
  -Translation (via the FOProcessor.setXLIFF method) XLF file

• Playlist shows as file names and will not play in the order of songs

  Why did my playlist showing as file names and not using their iD3 tags as they do in my music folder? For example: "Feeder - 03 Helium.mp3" instead of "Feeder - helium" as it should be?

  EDIT: Thanks to bob for the help on this.

  I do not understand why, but I have a playlist in MTP mode folder but in MSC playlist folder disappeared. I just tried to create a playlist in MSC mode folder and put my m3u playlist, he sees the video, but when I choose it it says it's empty...

  Someone please help! I have to use my old 2 GB for my playlists until this issue is resolved.

  EDIT: just redid all my playlists and it works now.

• I downloaded a trial version of Adobe DC but don't want I want just the free reader. I can't remove it as he advises Adobe application Manager and outlook use the files. I closed, restarted and set it up again, but it does not work. How can I delete

  I downloaded a trial version of Adobe DC but don't want I want just the free reader. I can't remove it as he advises Adobe application Manager and outlook use the files. I closed, restarted and set it up again, but it does not work. How can I remove the program

  Use of the Adobe Creative Cloud cleaning tool to solve installation problems can help

• Get all reference - modified controls: problem with LV2009 (and not LV8.6.1)

  I modified reference.vi get all the controls (http://zone.ni.com/devzone/cda/epd/p/id/2902) and it works very well in LV8.6.1.  With LV2009, I get the class conflicts of wire (for references).

  With LV8.6.1

  

  With LV2009

  

  I tried to type cast (more generic class) but it doesn't work, someone has an idea to solve the problem?

  Jean-Marc

  I agree with you,

  I made the changes as soon as this morning.  I just need the reference of the tab control itself (I don't need references from pages). I used 'generic' instead of 'control' and I catalogued to a more specific class (control) in step 5 in the block diagram.

  
  Thank you

  Jean-Marc

  The changed files are available at http://forums.ni.com/ni/board/message?board.id=4170&thread.id=30464 (I apologize to not upgrade this post).

• My browser suddenly always opens on the page it is on when it was last closed and use the tabs even if I turned them off. I tried to reinstall.

  I have my browser open comcast.net Web page and never use tabs. I use firefox for years and am very familiar with it. He suddenly started opening on the last page, he was away when closed and began to use tabs. When I remove Firefox from my computer, he still all my settings. I had this problem once before years and finishes having to delete my entire drive to fix. I would avoid a wipe away this time. I need to know how to get ALL of the browsers install deleted registry information, so I can get a really fresh. And Yes, I have tried all the normal channels and I'm pretty computer savvy. Please help before I go nuts. I use the version the most recent, but that goes back to the old versions didn't help either. Thank you.

  Bob Smith

  Software sometimes external will create or update an optional parameters file named user.js. For some reason, one of the things that often turns in there is a preference to restore your previous session at once. However, because Firefox uses user.js to override your normal parameters, whenever it starts, which then turns into a permanent change.

  More contact information system (next to your message) shows that you have a user.js file. To check what are the benefits and/or remove, try this technical support article: How to fix preferences that will not save.

  Note that by default, Windows hides your search Firefox profile folder and facilitate navigation in Windows Explorer. You can access the folder from inside using Firefox

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should start the folder in Windows Explorer.

  A little luck?

• Help - error invalid reference when closing file

  The problem is that the function "Close TDMS" generates the following error message:

  -------------------------------------------

  Error-2501 occurred at close TDMS in host pc.vi

  The possible reasons: Reference to invalid TDMS files.

  ------------------------------------------

  What is so strange about it, as you can see on the screenshot, is that many other functions uses the file reference without any problem whatsoever, but when it gets to the close function, an error is generated. I probed the wire of error at each step, and there is no error that occur before the close of tdms file function.

  Just to help understand the function: a file temporary tdms is created and all data from the raw data file is stored on it. A list is generated from all the names of valid channel (channels named something other than "*" "") and then these valid channels only is read from the temporary file PDM and written in the final output file. The files are so big the read and write functions must be placed in loops so that the data is read/written a line/column at the time and the entire 90 MB file is not loaded into RAM.

  Can someone help me? I really need to understand what is happening. Code examples would be useful.

  

  Change all the tunnels that you use for the refnum in those loops to Shift Registers.

  If the loop For travels '0' time the refnum passes not valid.

  Ben

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

  When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

  

  Hi Colin,

  Please try to reinstall the creative cloud after disabling antivirus and firewall.

  Reference: error download or update Adobe Creative Cloud applications

  Concerning

  Megha Rawat

• When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

  When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

  Randy Ruttger

  Thanks for the follow-up.

  Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

  The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

  You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

  On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

  So the solution to the problem you presented in this thread could have been...

  1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

  2. move to a different version of Premiere Elements (which you did)

  I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

  Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

  Best wishes

  RTA

• differences in the use of a backup Favorites file ".json" and a file of bookmarks '.html '.

  Hi all
  What is the difference between the use of a backup Favorites file ".json" and a file of bookmarks ".html"? It seems that both of them do the same job. If this is the case, then why there are two options (.json and .html) to do the same job? If this isn't the case, then what is the reason for the availability of the two options and how are they different? Although I read the material, it didn't quite clear form me again. Please be so kind enough to elaborate on the question so that I can get a clear understanding of their good use (s).
  Thank you very much in advance for your time and skills

  Hello

  See questions/684284

• How can I disable the auto-hide known file attachments, and why are still on the 10 internet pages where I have to download something if I use firefo

  How can I disable the auto-hide known file attachments and why are they always about 10 Web pages where I have to download something when I use mozila firefox?

  Windows computer

  Ignore the link of the player Shockwave that probably, you mustn't he compared to Flash player because it is barely used nowadays.

  FredMcD, you really need correct/update your clipboard for that.

  The downloadable Shockwave player version (not flashing) is 12.1.3.153 and not 15.0.0.152 as you can be confusing which version of the flashplayer reached before.

  Flash player is 15.0.0.189 and not 14.0.0.179 as you can see at https://www.adobe.com/software/flash/about/

  Flash player is used for good Flash videos like Youtube and Flash games in Shockwave player is little used compared to Flash, for things such as games and online learning tools.

  And please, don't say "I asked. It's the way it is displayed on the site"as you said last time in https://support.mozilla.org/en-US/questions/1026518 , because who says little about why you're wrong ad versions and calling Shockwave player, Shockwave Flash.

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?