lost control of my Mac?
All of a sudden, I have no control on my Mac. Screens come and go, apps that I never started "leave unexpectedly.
I started with D key is pressed and the verification by hdwe - everything is OK.
I used the SHIFT key at startup in safe mode. It was OK, stable for everything, then chaos again.
I think I have been hacked or picked up a virus.
I made backup to Time Capsule a day or two ago.
How to get out of this mess? The tape machine and get a new copy of the Yosemite?
Mini mid-2011 mac running Yosemite with 8 GB of DDR3 memory.
Thank you, Bob
PS - work on my MBP-it's OK
You can view a report of etrecheck for later analysis
www.etrecheck.com
Tags: Mac
Similar Questions
-
Original title: help
OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4
Hi MartyFenwick,
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. What is the brand and model of the computer?
2. What is the brand and model of the mouse and keyboard?
3. you receive an error code or message?
4. is everything works well after running system restore?
5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?
6. what happens when you try to play music CDs?
7. what program you use to play the CD?
Please follow the methods and mark the question below:
Before you install SP1, follow the method 1 and 2.
Method 1:
You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
Method 2:
I suggest you disable the antivirus for temporarily until the installation of SP 1.
Disable the antivirus software:
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareImportant note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3:
Follow the steps in the link for problems with the keyboard and the mouse below.
Mouse, touchpad and keyboard with Windows problems:http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows
Method 4:
Follow the steps in the link below.
Learn how to install Windows Vista Service Pack 1 (SP1):
I hope that the information above helps you.
-
Where has lost control of Bezier curves?
Where has lost control of Bezier curves? Previously, management had weapons, but for now just stretching and compression of the angle of the curve. How do I get the old settings Beziers?
You have probably changed the tool pen Rotobezier. Check the toolbar. You can change the type of an existing right click and digging through the menu path.
-
I have 4 discs on my mac pro and just lost one of them. He just disappeared from my office and does not appear in the finder. How can I find?
If you have restarted?
You have released the HD sled and reinsert the sled?
You have swapped the berries HD that the problem lies?
-Does show in disk utility?
-Does show in System Profiler under SATA/SATA Express?
OS X: about system information and System Profiler - Apple Support
https://support.Apple.com/en-us/HT203001
Maybe he's dead.
-
I lost control of my computer. Lost all privlages security
diverted
I lost more control of my computer only to get lost all temp user profile admin privlages and file associations save or reload back windows'nt fix prob this computer is also on my little home network allso unable to change my privlages of security.
Hello
"can't get the temporary user profile.
You have "temp user profile".
First fix that.
1 do a Safe Mode system restore to before the problem:
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
Enter the Mode Windows safe. Use the arrow keys to navigate and the ENTER key to select Mode (which is where you have already gone)
http://www.computerhope.com/issues/chsafe.htm#03
2. and this is when loading a profile Temp.
"A temporary profile is loaded after you connect to a Windows Vista-based system.
http://support.Microsoft.com/kb/947242
And how to fix a corrupted user profile:
"Fix a corrupted user profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
See you soon.
-
A couple of months back, my task manager, the opening showed 1 screen (no options for other screens on the tool and the control bar has lost. Have tried everything (obviously not the right one) to fix it.
Double click on the white strip at the top of the window.
-
I lost the control panel in CC2015 how do I get it back?
Menu: Window > control
-
I lost control of the iPad from my dad
I expect after the iPad to my old man 2. (So I know how to work, I have a second iPad, the same model, so I can be sure that I understand what my father asks, when there hard work.) Recently he told me that he has problems with it, so I asked her what she did and then tried the same actions on my iPad - no problems seen :-)
However when I saw him then, I tried logging on my Apple ID and to my astonishment, all text fields, I tried started to fill up, without me touching the keyboard. I took it home and now whenever I turn it on it and try to use it, I see a mad dash through the menus and controls - all this without me touching a thing! This is all very worrying - anyone have an explanation?
Is it possible that some kind of accessibility feature has been activated?
-
I have reset firefox and lost control of the sound icon
Using a laptop hp compaq. A get the slow start, so reset firefox. After reset, have more control icon in the bottom right of the screen. Other icons are still there. (State of the battery, windows sidebar, etc.) Have no sound.
Hello
Please follow what to do if Firefox won't play all the sounds section to solve your problem.
Thank you
-
Spooky: Front lost control of the scheme code
I have a LabVIEW (Win7-64B LabVIEW 14.0 32 bit) program that behaves a little bit scary.
On some occasions, while the LabVIEW tandis que le LabVIEW programme program is running, suddenly the front panel controls are no longer read by the process of block diagram. So that's what I see:
- The program runs, processes the data, and updates indicators as expected.
- The run button is in unmanaged mode even if the program continues to run.
- The button abandon red is not functional - push has no effect.
- The block diagram can be debugged, simple staircase and breakpoints.
- The controls on the front panel are not read and the program cannot be stopped because it is based on the action of the Panel before doing so.
- The run button is non-functional in the sense that it can be pressed in run mode, but he has no apparent effect on the State of the block already running diagram.
- The only way to stop the program is closing the front panel.
- The behavior occurs at random times, is annoyingly frequent, but not enough (frequent) to make debugging by elimination of effective code.
The program is a construction of State machine using queued messages and access material cRIO via shared variables.
I know that this information is rather rare in which case debugging suggestions, but in which direction to look for all ideas are welcome.
Some of these could possibly be explained by things like the user interface is locked by a structure of the event or updates to defer property is set on the Panel or being stuck in a call from the DLL, but there is another option that seems to match your description a little: https://lavag.org/topic/17049-windows-aero-theme-and-lockup/?p=104728
When I saw him it was in an EXE file, so I can't comment on things like execution of arrows, but it was definitely a case where the VI was certainly running and updating the user interface, but was not receiving updates of the user interface.
-
Lost control panel in the start menu
I get this message cancelled because of the restriction, see administrator? Control Panel is to fly on the other set ups. and now my pc not stop I have to turn off the main power to stop. Thank you
Hey BROOKS,.
1. did you of recent changes on the computer?
2. When you receive the error message?
3. what happens when you try to shut down the computer?
4 is the computer connected to the domain environment?
You need to add the control panel in the start menu by following the steps below.
(a) right click on the Start menu
(b) select Properties
(c) with bullet menu selected startup, select Customize
(d) in the tab Advanced in the elements of the start menu, the value Panel (an object) to display as a link.
Customize the Start Menu
http://www.Microsoft.com/windowsxp/using/accessibility/customizestartmenu.mspx
See the below Microsoft article and try the steps mentioned on the question of the judgment
Advanced Troubleshooting for shutdown problems in Windows XP
http://support.Microsoft.com/kb/308029
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Basic applications lost blackBerry Smartphones using Mac Office software
Hello
I have a working Bold 9700 and it is connected to the corporate network. It has been implemented by our IT Department. I was delivered he no charger so use a lead to my laptop. I have let it run to zero battery and when I tried to start, it would not turn on and had a red light. Connect to a Mac, I got a message that he was not recognized and reload the operating system. After doing this that it resets and I had to take at work to connect to the company. The problem is that many applications are missing e.g. GPS, guardian of password, Notes, Word, Excel etc.
Reading the forums I'm for Blackberry on my Mac and click Device Manager on restore and the various applications I want are grayed out. I click on the request handler and is listed, so I can't do it until the load.
I click on "check for updates" and get a message that there may be a problem with the connection to the server or the server is not responding please try again later.
Is this a problem of encryption defined by my employer that we have very high standards of security, or is it a Mac problem or what? The main problem for me is to recover the password keeper and GPS software.
Thanks for any help.
Speigal
I sorted this out after reading the forum. I decided the STINKS device Mac Manager and so borrowed a PC. The Manager of OS and devices, and that allowed me to reinstall all applications downloaded. All works now. Always on my Mac it does not correctly connect updates.
Thank you
SPeigal
-
It worked, then all of a sudden he doesn't. I tried to uninstall and reinstall at least 4 times now. NOTHING. Did he experienced this?
jtpesek
Found a fix
-
Reference Dell 5520, updated to Windows 8, lost control of Wi - Fi
I bought a Dell Inspiron 15R model 5520 with Windows 7. Everything worked well and I had a Wi - Fi access.
I've updated to Windows 8, but now I have no wireless access. I opened the PC settings and confirmed that airplane Mode is disabled and Blue-tooth is turned on. I have no other settings on this screen. I have used the Fn & F2 keys and confirmed that the Wi - Fi light on the front of the laptop is off, and then turn it back on.
A wired connection works fine. When I ran for a new network troubleshooting, no router is listed, even though I know that there are several routers available to my other laptop and my eReader devices. How to access my Wi - Fi controls?
Thank you.
It worked! Now, I have Wi - Fi connection controls and can connect wirelessly to the internet.
Thank you very much. You are the best.
As you requested, I have deleted the two items and posted my info below.
Microsoft Windows [Version 6.2.9200]
(c) Microsoft Corporation, 2012. All rights reserved.
C:\Windows\System32>Systeminfo
Host name: PORTIA
Name of the operating system: Microsoft Windows 8 Pro
OS version: 6.2.9200 n/a build 9200
OS manufacturer: Microsoft Corporation
OS configuration: Standalone Workstation
OS Build type: multiprocessor Free
Registered owner: DELETED FOR the DISPLAY
Registered organization:
Product ID: DELETED FOR the DISPLAY
Original installation date: 19/01/2013, 14:00:12
Starting system: 26/01/2013, 18:02:25
System manufacturer: Dell Inc..
System model: Inspiron 5520
Type of system: PC x 64
Processor (s): 1 processor installed.
[01]: Intel64 family 6 model 7 Stepping, GenuineInt 42
El ~ 2400 Mhz
BIOS version: Dell Inc. A13, 15/11/2012
Windows directory: C:\WINDOWS
System directory: C:\WINDOWS\system32
Starting device: \Device\HarddiskVolume2
Local system: en - us; English (United States)
Input locale: en - us; English (United States)
Time zone: (UTC-05:00) Eastern (U.S. & Canada)
Total physical memory: 6 017 MB
Available physical memory: 4 527 MB
Virtual memory: Max size: 10 MB, 113
Virtual memory: available: 8 435 MB
Virtual memory: in use: 1 678 MB
Office (s) swap file: C:\pagefile.sys
Domain: workgroup
Logon server: \\PORTIA
Corrections: 45 fixes installed.
[01]: Package KB2712101_Microsoft-Windows-CameraCodec
[02]: KB2727528
[03]: KB2729462
[04]: KB2736693
[05]: KB2737084
[06]: KB2742614
[07]: KB2742616
[08]: KB2750149
[09]: KB2751352
[10]: KB2753842
[11]: KB2756872
[12]: KB2756923
[13]: KB2757638
[14]: KB2758246
[15]: KB2761094
[16]: KB2761465
[17]: KB2764462
[18]: KB2764870
[19]: KB2768703
[20]: KB2769034
[21]: KB2769165
[22]: KB2769166
[23]: KB2770660
[24]: KB2770917
[25]: KB2771431
[26]: KB2771744
[27]: KB2771821
[28]: KB2777166
[29]: KB2777294
[30]: KB2778171
[31]: KB2778930
[32]: KB2779562
[33]: KB2779768
[34]: KB2780342
[35]: KB2780523
[36]: KB2780541
[37]: KB2782419
[38]: KB2783251
[39]: KB2784160
[40]: KB2785094
[41]: KB2785220
[42]: KB2788350
[43]: KB2790920
[44]: KB2792009
[45]: KB2796096
Network cards: 4 interconnect installed.
[01]: Realtek PCIe FE Family Controller
Login name: Ethernet
DHCP enabled: Yes
DHCP server: 192.168.1.1
IP addresses
[01]: 192.168.1.6
[02]: fe80::57d:29de:a970:f6
[02]: device Bluetooth (personal area network)
Name of the connection: Bluetooth network connection
Status: Media disconnected
[03]: Dell 1704 802.11b/g/n wireless (2.4 GHz)
Name of the connection: Wi - Fi
Status: Media disconnected
[04]: Virtual Broadcom wireless adapter
Name of the connection: connection to the Local network
Status: Media disconnected
Requirements for Hyper-V: VM Monitor Mode Extensions: Yes
Virtualization enabled in Firmware: Yes
Second floor address translation: Yes
Data Execution Prevention available: Yes
C:\Windows\System32 >
-
Since the upgrade to Adobe Reader XI I lost control of my printer properties screen.
When the printer dialog box appears first I get a screen oversized with text back to 2cm and no control of the screen OR I get a right size print dialog box with white icons and all text fields a filled with small size "xxxxxxxxxxxxxxx" in all text areas.
I uninstalled / reinstalled 3 times in recent weeks without effect and had to fall back to worm of Reader 8 to regain control of impression.
Can anyone offer a solution please
I don't know what system font is missing (or damaged), but it's often the Segoe font that causes this behavior.
What Segoe fonts you have installed?
Maybe you are looking for
-
HP PhotoSmart r742: Drivers needed
I can't see all of the photos on my camera from my Windows 7 (64 bit) Dell Latitude E5440. There are no drivers available however, I expected to a workaround. I was able to view pctures before an update of Windows. Thank you for your help
-
Why BrowserField demo does not use BrowserField?
I had some problems getting the BrowserField object to display all images on a page. When you search the formus, it was suggested to use the BrowserFieldDemo included in JDE for example. I tried and it works, but the back button does not work and you
-
My scren keyboard on does not: error when I try to use:c:\windows\system32\osk.exe, a referral was returned from the server
-
How to deploy a custom in EBS 12.2.4 servlet?
Hi allThis may look like a trivial problem, but I am currently not able to migrate a servlet custom EBS 11.5.10 in 12.2.4.I have lived many threads OTN and other web searches, but I'm still stuck.This custom servlet is called from a page of the OFA i
-
different scheme for the staging area
Could you please give me a scenario where the transit area must be defined in a different pattern of sources or target