lost control panel

Similar Questions

• Lost control panel in the start menu

  I get this message cancelled because of the restriction, see administrator? Control Panel is to fly on the other set ups. and now my pc not stop I have to turn off the main power to stop. Thank you

  Hey BROOKS,.

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. what happens when you try to shut down the computer?

  4 is the computer connected to the domain environment?

  You need to add the control panel in the start menu by following the steps below.

  (a) right click on the Start menu

  (b) select Properties

  (c) with bullet menu selected startup, select Customize

  (d) in the tab Advanced in the elements of the start menu, the value Panel (an object) to display as a link.

  Customize the Start Menu

  http://www.Microsoft.com/windowsxp/using/accessibility/customizestartmenu.mspx

   

  See the below Microsoft article and try the steps mentioned on the question of the judgment

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't find my control panel.

  What should I do to make it reappear?

  What version of Windows you have, including the service pack?

  What anti-virus application you have, and is its current subscription?

  What other antimalware applications do you have (and use regularly)?

  It happened just before you 'lost' Control Panel?

  Do you mean that there is no entry for the Panel on the right side of the menu to start--> http://www.coolnerds.com/XP/StartMenu/xpStartMenu03.gif

  Or do you mean that when you click on the link to the control panel of the Control Panel does not appear?  In this case, what happens (error message completely, without paraphrasing report)

• I lost my defult printer on my control panel

  Hello

  I unplugged my printer black cable (machine) and put it on my color printer to print photos.

  I have lost the icon for my black/white printer in the Control Panel - hardware and sound - printers.

  No idea where it went please help me

  Hello Fiona,

  Thanks for posting your query in Microsoft Community.

  I understand that this printer icon is missing after you unplug the computer.

  I will certainly help you in this matter.

  1 - is the monochrome printer came if reconnect?

  2 are the drivers for this printer always installed on the computer?

  Run the Microsoft fixit and check the status.

  See the link.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Please feel free to post if you all the Windows problems, we would be happy to help you.

• I lost a lot of system32 files much in the restoration of control panel triedto wouldn't. I am running XP

  How can control panel, I get the files back

  You must boot from your XP boot again drive... and select the option 'FIX'... and your job is done...

  Yes...

• I need to create an association, in the control panel of the associations set to open a .i file seems to have lost this program to do?

  Could not open a file, the message came, I need to create an association in the control panel be greatfull advises you on how to do this thanks Brian Jones.

  Hello

  What is the file extension?

  You must have this program installed to open this specific extension

  If it's a file .doc, you must have Word installed

  If a .xls Excel file must be installed

  etc.

  read this:

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

• LR6: Lost Protocol Control Panel - how to implement again?

  By mistake I have DELETED a day my PROTOCOL of THE CONTROL PANEL on the left side of the module of Lightroom (6.3) "develop."

  How can I incorporate this Protocol once again Control Panel, getting able to use and manage protocols again one step?

  Reinstall Lightroom does not.

  I use Mac OS - X 10.11

  /Control right click on one of the tabs on the left and select expand. Your translation is difficult to understand, but I take to guess what is the problem!

• Envy 15: Loss of Beats Audio control panel after Windows 10 last updated

  Hello

  Does anyone know if the Panel Audio Beats will be available again?

  After the last update to Win 10 I lost the control panel and also my Bass speaker didn't work on the external speakers. Finally I sorted out the problem of speaker by selecting another driver in Device Manager.

  The most recent update to Win 10 was 1607.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Windows Search / Immersive Control Panel / AppData Error Message

  I have a new laptop HP Envy delivered pre-installed with Windows 8.1 on a hard drive traditional.

  Immediately on starting it the first time, I connected a SSD to the laptop via a USB cable and used imaging software to drive provided by Samsung to the HARD whole to the new/empty SSD disk image.

  Returned & replaced the HDD SSD w / in 1 Bay drive, followed by placing the original HARD drive (but now secondary) in the 2 Bay drive.

  I wanted to re - map the 'My Documents' folder on the SSD to store files in this folder on the secondary HARD drive, so I remapped this ("c:\users\Brad\Documents") folder to point to 'f:\users\Brad\Documents' instead.

  "So move on, for some reason, when I go to the desktop search item and try, for example, to search for"Remove Apps", which translates by he find something like"Uninstalling apps to save hard drive space"or something like that, and I click on uninstall apps to save hard disk space", I get a message similar to the following :

  [Window title]
  C:\Users\Administrator\AppData\Local\Packages\windows.immersivecontrolpanelcw5n1h2txyewy\LocalState\Indexed\Settings\en-US\Classic{4026492f-2f69-46b8-b9bf-5654fc07e423}.settingcontent-ms
  [Content]
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I'm not sitting on my laptop right now, but I found the info. top online and there are very close to the error msg. I get, except that instead of "c:\Users\bmccollum\AppData\...". ", the title of the GMS. I get begins with "f:\Users\bmccollum\AppData\...". ». I don't remember remapping anywhere at all outside the location of 'My Documents', then why is this research activity trying to seek the "AppData" folder on my hard drive secondary now?

  This same error msg occurs when I am looking for another couple of points, but above all what I find and click work.

  For two items that I seek and I click on the element are, and I get this error message, if I go to the elements of the "long way" but just clicking 'Control Panel' or anything else and keep them on the street from there, items open fine, it's just when I try to click on a few items after that I looked for something they are not w / the same error msg from above.

  I searched around online and have tried the trick of "rebuild indexes" and this seems to fix errors related to research for just a little, then a few minutes later I can look for the same thing that was previously the 'Immersive Control Panel' error and bam, it is back again with this similar to one already mentioned msg.

  Something seems to be pointing to "AppData" being on my drive 'f' (secondary) when I don't think I moved anything but my "my documents" of primary transmission 'c' to secondary drive "f".

  I'm quite lost. Any other ideas on what may be the cause/solution for this?

  Thanks in advance.

  Hey @zildjian ,

  Welcome to the HP Forums!

  I understand that you are having problems with the paths to files on your Envy laptop.

  The most important thing here is that looks like you have cloned the drive, but not the format of the original HARD disk. This will cause a plethora of problems because you now have 2 boot managers and repositories of operating system file. Windows will have a fit over this.

  I suggest copy important information from the HARD drive to an external drive or for SSD and formatting the drive. This will wipe the Windows installation and free up additional space. From there, you can create a Documents folder and map the folder accordingly.

  You remap F:\Users\Brad\Documents by adding it to the document library or did you use the move feature tab in the properties of the Documents folder location?

  Please try the original function of HARD drive and test development shaped.

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.

• I have not 'Programmes' in my control panel

  Recently, I lost "Freecell" from my computer.  (XP Home Edition)  It was because I bought "Grimefighter" of Avast!  I searched this site how to reinstall and was puzzled at the first hurdle.  You suggest "Start/Control Panel/programs/etc" but I do not have a "Programs" icon (phone, printer and Power Options are the icons of 'P' I only.)  So I'm stuck.

  Any other suggestions how re - install Freecell please.  Miss me it!

  If you are not in the 'friendly' view of the Control Panel, you'll see icons instead.  In icon view, the desired option called "Add/Remove Programs".  From there, the rest of the instructions will be the same.

• Cannot open Control Panel

  Original title: Control Panel

  Windows XP; I think there a newer version through updates with service pack 3 installed.

  I can't add or remove programs; access to cheque accounts or user control panel system, whenever I try, I get the following error.

  I don't know how to rename. When I try to search for it, it comes up with nothing. It is as if it is lost or dumped and I don't know how to get it back. Do I have to have this file in particular?

  I can't even format my hard drive and reinstall Windows XP

  (Windows cannot find 'C:\WINDOWS\system32\rundll32.exe'.  Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click Search).

  When you try to open a control panel applet, you see a message like this:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again.  To search for a file, click the Start button, and then click search.

  As the rundll32.exe file is one of 3498 Windows File Protection files handles, should never be missing.

  If the file is actually missing, it was probably quarantined (actually deleted) programmatically your antivirus or anti-malware not specified that you use.

  You can look in the c:\windows\system32 folder and see if the file is actually missing or not, and if you find that it is missing, you must replace it somehow.

  Despite the repeated Microsoft committed advice of 'experts' Support Engineer to run the System File Checker, run sfc/scannow won't help you and it does not replace the missing file.  That's not what sfc/scannow does it's not how it works and it's not what it is for.

  Here's what works :

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called rundll32 when the name of the file should really be called rundll32.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• My speakers stopped working. Not detected in Control Panel

  My speakers just stopped working, now when I connect, I get a found new hardware message (pci device) but when I apply the wizard, he found nothing.

  In my control panel, it has not detected speaker. I lost my drivers somehow? I have Norton Antivirus.

  My speakers just stopped working, now when I connect, I get a found new hardware message (pci device) but when I apply the wizard, he found nothing.

  In my control panel, it has not detected speaker. I lost my drivers somehow? I have Norton Antivirus.

  Perhaps.  Visit the hardware manufacturer's website and download and install its adequate for your sound card card device drivers.  (Audio).

  What you have is not something I know in light of what you have. ;-)

• How to add and remove programs via the control panel when access pops up an error of windows\system32\rundll.exe

  need to know how to fix the windows\system32\rundll32.exe to be able to go to add remove programs and other options in the Panel

  From the other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/how-to-access-Add-and-remove-programs-through/852bd751-106C-481F-B471-9f32ddc40eab

  old question, new question so what I do or how to set or return rundll.exe in my computer?

  old question question/new - matter always request how to fix or recover from the windows/system32/rnudll.exe in computer science. I see no other answer to this anywhere

  Hi DadVQ,

  ·         Did you do changes on the computer before the show?

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps mentioned in the article below and check if the problem still persists.

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

   

  Method 2: If the problem persists, I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• can't open internet options in the control panel by using the xp professional operating system

  Cannot open internet option in the Control Panel, click on it and nothing happens.  Toolbar lost on internet explore

  Hello

  1 could you please elaborate on the issue that you are facing?
  2. have you made changes on the computer recently?
  3. what versiopn of internet explore is installed on your computer?

  Here is a workaround to open Internet Options.
  Click Start and type inetcpl.cpl in the race and press ENTER.

  I hope this helps.